Old File Deletion 2nd Hard Drive
Apr 9, 2011
I am trying to clean up my second internal hard drive in my desktop in which I just upgraded the OS to Windows 7. My second hard drive (D) was the one that I think I had XP on before I upgraded to Windows 7. I installed Windows 7 on the 1st hard drive (C). So at this point I just want (D) to be as clean, empty as possible. But in trying to delete many of the files, it gets to the point where it says Admin approval required. I cant get past that part. I need help with this please. I dont care if I erase the whole hard drive, just want it cleaned up.
View 4 Replies
ADVERTISEMENT
Nov 12, 2009
My friend recently had her computer upgraded to Windows 7 from Vista. She used the Vista StickyNotes program to keep track of important information. I told her that this program wasn't intended for permanent information storage, but she liked it because it was simple. She upgraded her computer to Windows 7, and now her sticky notes are gone.
My question is this: Is there any way to retrieve those old sticky notes?
I told her in all honesty that I think they are gone unless she wants to pay big bucks to go to a forensic type agency that could pull the information off. I just need another opinion. I hope I'm wrong.
I also hope I gave enough information and explained the situation with enough detail.
View 4 Replies
View Related
Apr 12, 2011
My old computer was put to rest with a big power surge last week. I had to buy a new computer and now I would like to access my old files. I have taken the hard drive out of my old PC. My new PC of course has windows 7. I am not a computer expert but I am not a novice either. The old hard drive has the sata connection and I have a sata cable, but have never used one previously. I connected the cable to the old hard drive and then plugged in the power cord to the wall outlet. I then I connected the USB cable from the sata cable connected to my old drive to my new PC�s USB port. I haven't been able to access the files on the old drive but I know my new pc has recognized the hardware. After I connected the USB cable to my new pc under Devices I can see a hardware named USB to ATA/ATAPI Bridge. Not sure what that means. There is �No� drive listed for it though when I open Windows Explorer. I can only see the (OS) C drive and the HP Recovery D drive.
View 4 Replies
View Related
Jan 26, 2011
I have an *.iso file on my hard disc.What is the easiest was to map this �.iso file to a (free) driver letter (e.g. M ?I don't want to burn it on a DVD and access it in my DVD drive? Is there a Win7 built-in way?
View 3 Replies
View Related
Feb 17, 2013
So, i woke up the other day to see my Windows 7 computer is now completely screwed up that i am on right now..C drive is Mirror RAIDed to let you know.It is reporting 74.1MB free of 465GB total on the drive.No matter what i delete, it does NOT EVER free up space.As a matter of fact, some files delete, then come right back, files i've added myself.. weird #1Two, i run chkdsk in windows, it says C drive is a RAW drive and cant scan however it boots up fine to it every time. weird #2So i then use windows repair command prompt to chkdsk /F /R It sees it's NTFS JUST FINE..but reports ZERO errors.. weird #3I scan using Intel Matrix Storage Console in windows, NO ERRORS, weird #4But i am getting Disk I/O errors like crazy in windows logs and in programs, etc.. weird #5I selected all files on Disk C- total space in use under 300gb, but showing 465GB in use.. weird #6Scanned for infections with AVG, no errors, i tried malwarebytes, will not open- 0xc000005. weird #7So i have a drive that can't be read but is read but reporting wrong size but measures right size that has no errors but has errors.
View 5 Replies
View Related
Sep 1, 2011
I took my old desktop HD out and hooked it upto my new Windows 7. teen when I try to even open my 2003 Word Reeume doc it says "Word can not open the document; user does not have access priviliges" It's my resume and all i want to do is copy it to my new comp.
View 4 Replies
View Related
Jan 10, 2011
My old hard drive sounds like it is about to die. So I am wondering, once I install my new HD (format and install windows) will it be possible to hook up my old HD and transfer the files from it to the new HD? I am using Windows 7 and both drives would be SATA.
View 5 Replies
View Related
Jul 10, 2012
I have laptop with one of the windows OS on it and want to transferr OS and all the file to it,problem is i do not have the cd or product key, so i may be able to transfer all the file but how can i transfer the OS and have never paritioned a hard drive either. i have seen the r alot of gatgets out their and on ebay thay sys all u have to do is plug it in to the laptops usb , and plug the new hard drive to the cloner and just transfer all files,, but it says nothing about transferring the OS or MS office 2010 or any thing with product codes so is the any product on the market to transfer everything to new hard drive same speed just from 89GB to 350GB,
View 5 Replies
View Related
Jul 10, 2012
I have laptop with one of the windows OS on it and want to transferr OS and all the file to it,problem is i do not have the cd or product key, so i may be able to transfer all the file but how can i transfer the OS and have never paritioned a hard drive either. i have seen the r alot of gatgets out their and on ebay thay sys all u have to do is plug it in to the laptops usb , and plug the new hard drive to the cloner and just transfer all files,, but it says nothing about transferring the OS or MS office 2010 or any thing with product codes so is the any product on the market to transfer everything to new hard drive same speed just from 89GB to 350GB
View 3 Replies
View Related
Aug 15, 2010
I am having issues with my external hard drive. It has been working just fine until today. The drive is showing up and I can access a few folders and fewer files, but the majority of the contents are nowhere to be found. It works without a hitch on every other computer in the house but the main one. Running chkdsk says the drive has a RAW file system and chkdsk can't run. This pc is running Windows 7 32-bit (all the others have Windows 7 64-bit) but no idea why I'm having this issue. Yesterday I installed a new printer, did some windows updates, and had a power outage, so I suspect the problem lies with one of those things. I'm really at a loss here as what to do though.
View 5 Replies
View Related
Apr 8, 2011
I have discovered that my external hard drive is showing "unknown file system" hence why it will not show anywhere on the computer for instance under disk management or my computer, is there any way to get around this? like can a file system be recovered?
View 9 Replies
View Related
May 2, 2011
I got pop up in utorrent says a directory is corrupt, I start to run chkdsk on that drive. In this case in have drive letter E. I click on computer, then go to the drive, right click, properties, tools, check now. It says the drive is need to to forced to dismount. I click on ok. then in computers, the drive just show the letter, not size or disk meter. In the open windows on task bar, I did not see scan disk running, or maybe I accidentally closed because I was switching between several programs.
I thought restart pc the drive will show again, but after restart, the drive does not show up, it says 'E: is not accessible, the file or directory is corrupted and unreadable.' I tried to start pc 2 times, still same. I downloaded Partition Wizard Home Edition (minitool partition wizard home edition 5.2) and running it, it showing my files are still in the drive, but not accessible in windows. I also run chkdsk in recovery environment, but still says disk is corrupt, chkdsk cannot continue.
View 14 Replies
View Related
Jan 26, 2009
How to Create a Windows 7 VHD at Boot to Start with from Boot ?
View 0 Replies
View Related
Nov 12, 2011
i am currently having problems trying to tranfer files to my internal harddrive it stated that i have the drive write protected. I have changed permission to full control..both under properties and also under hardrive management but the only thing I have not been able to change is special permissions.. i have also tried changing all inherited children too but these have not helped.. also .. I do have a couple of usb harddrives connected at the same time ..
View 5 Replies
View Related
Feb 5, 2012
So I bought a used 2 TB Hard drive and it supposedly was only used a couple of times and I got a good deal.I plugged it in and the software was installed successfully but it doesn't show up in the explorer with a drive letter. Now when I go to the device manager it does show up but I am not able to format it or give it a letter etc. Also like I said in the title it doesn't have a fat32 or NTFS File System.The hard drive I right clicked is the one I am talking about.
View 4 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Oct 25, 2011
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies
View Related
Jun 16, 2011
I have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies
View Related
Mar 30, 2012
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies
View Related
Mar 4, 2010
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies
View Related
Dec 24, 2011
I have a virus infected sata hard drive with windows 7 on it. It has the win 7 anti virus 2012 on it, and it's a cybercriminal virus. I have lots of files I want to transfer to the new sata drive. I already have windows 7 installed on the new drive. How do I get the files from the bad drive to the new one?
View 4 Replies
View Related
Jan 21, 2013
I have a USB Webcam 6.1.7601.17514 from Microsoft installed on a Fujitsu Laptop (Windows 7 ) and I want to copy and install it on another Fujitsu laptop (Windows 7).The other laptop the camera is not working and there is no webcam driver installed.
View 1 Replies
View Related
Jan 12, 2013
so i reinstall my os and backed up all of my c drive and an additional hdd when i restored them on the new hdd i try to delete the old c folder and it says i dont have permission but im the only user on this computer and it will not allow me to delete this folder at all i tried to go in and allow myself full access but yet can not delete this folder can anyone give me some insight on this and a way to get rid of this restored c
View 17 Replies
View Related
Jul 6, 2012
I see there is no log in windows 7 about the deleted fileI often use the shift + delete to delete files I do not need, unfortunately sometimes the parent folder gets deletedinstead (focus on the left tree area instead of the right list area)at least,a list of the deleted files would be good,is it nothing like such in the computer management area?is any program addition that would monitor creation/edition/deletion of files?
View 5 Replies
View Related
Dec 15, 2009
I have tried to Delete my Recovery Partition on my Acer Netbook but it doesn't work. I have the boot files on the C: Drive. My Recovery Partition has nothing on it.
I have used the cmd
select volume 1
active volume 1
delete volume 1
and than cmd freezes up on me and all i can do is close the program or check for online solution
than after i try
select volume 1
active volume 1
delete partition
i get an error:
"Cannot delete a protected partition without the force protected parameter set."
I have also tried to go in the Disk Management section and delete the Recovery Partition but when I select it, I can only click on settings.
How can I make the Recovery Partition become usable?
View 7 Replies
View Related
Jun 23, 2012
I just used CCleaner to remove Norton 360 (trial) from my hp desktop. After deletion it asked me to restart, which I did. Upon restart the PC will not reboot. It gets to the initial screen showing boot options for less than a second and then goes blank, with a cursor flashing in the top left corner. No inputs are being accepted, so I cannot boot to safe mode or the recovery console.
View 9 Replies
View Related
Aug 13, 2012
I followed instructions to clear Windows7 update history, tried to delete all in the Datastore file but on double clicking the folder nothing appeared so unable to deletethe update history.
View 1 Replies
View Related
Jun 30, 2012
My computer for the longest time ran with a 1400x900 resolution, However when I turned the PC on today, the resolution was changed, without me knowing to something that did not fit.So I said " I'll change it back to 1400x900..."When I went to do so, the resolution was no longer listed, and not able to be selected again, it simply wasn't there. Even in all the Valid Modes menu. even when I go to change it, the desktop does not change to fit the new sizes selected.I am not sure if this is a monitor malfunction, as the screen has begun to flicker slowly recently (about 2-3 days ago).I am at a loss at what to do... I want the 1400x900 resolution back.
View 3 Replies
View Related
Dec 17, 2009
I have a compaq presario 350 notebook running XP pro.... I have purchased the full installation disks for Windows 7. This came with 2 disks, Identicale in appearance. Can someone tell me what the 2 disks are for. I have managed to what I think is successfully install Windows 7. However The reason for me upgrading to Win 7 was to remove any old data and free up the Hard disk.
This has not happened. Now I have even less disk space than before. Did I do his wrong ? Can I delete the old partition. If so How do I do it and do I need additional software to do this. Will I need to retain set up files etc or can I completley wipe the Hard disk and install fresh. Sorry for sounding a bit vaigue. I'm just not good at this sort of thing.
View 5 Replies
View Related
Nov 16, 2009
I have Vista installed on my Hard Drive, 250 GB.
But i recently purchased a 2nd Hard Drive, 500 GB, and i want to install Windows 7 on it.
Is that possible, to have both separately?
View 3 Replies
View Related
Aug 9, 2011
I am trying to keep my internet history from being deleted not by the computer but by anyone using my computer. So I managed to get the group policy editor installed into my computer (because my version of windows 7 didn't come with it). How to disable the delete internet browsing option i followed all the steps until I got to the last step where it wanted me to click on internet explorer and then go to the delete browsing option. When I got this step I found I had no delete browsing option. How I can stop my internet history from being deleted..
View 1 Replies
View Related
