Accessing File On Old Hard Drive?
Apr 12, 2011
My old computer was put to rest with a big power surge last week. I had to buy a new computer and now I would like to access my old files. I have taken the hard drive out of my old PC. My new PC of course has windows 7. I am not a computer expert but I am not a novice either. The old hard drive has the sata connection and I have a sata cable, but have never used one previously. I connected the cable to the old hard drive and then plugged in the power cord to the wall outlet. I then I connected the USB cable from the sata cable connected to my old drive to my new PC�s USB port. I haven't been able to access the files on the old drive but I know my new pc has recognized the hardware. After I connected the USB cable to my new pc under Devices I can see a hardware named USB to ATA/ATAPI Bridge. Not sure what that means. There is �No� drive listed for it though when I open Windows Explorer. I can only see the (OS) C drive and the HP Recovery D drive.
View 4 Replies
ADVERTISEMENT
May 18, 2012
I have a desktop (Using it right now) with a hard drive, 7 etc etc and everything works fine. I am however having issues accessing a hard drive from an old lap top I used to own. It was sold, but I kept the hard drive. This was a while ago so I can't remember its OS, but I'm pretty sure it was XP but possibly vista. I have plugged it into one of my towers extra hard drive spots in hopes of being able to retrieve some old pictures from it.This is my problem: After reboot, it got a message saying the usual installing device driver software thing, after that... nothing. I look in my computer and no new drive showed up.
View 1 Replies
View Related
Nov 1, 2011
I had two hard drives in a Windows 7 system. One had the operating system and the other was for storage. The storage drive is a a 2 TB drive. I am not sure what format was selected on the hard drive. If this information is needed, I can do so with guidance how to find this information. The 2 TB has a lot of data. The drive was removed. Later the main drive with the operating was formatted, and the 2 TB drive was put back into the computer, but new Windows 7 does not recognize the drive.
I am not sure if Windows 7 updates have been run, so maybe this is a driver issue? I tried to access the drive through Linux, and Linux showed the drive as empty. I am wondering if some weird security feature was enabled? If so, is there any easy way to get the data back? In windows 7 under devise manager, the drives shows up, but I can only see the devise name. I also tried accessing the drive in external case in a Mac Lion System, and could not get the drive to open up.
View 2 Replies
View Related
Nov 12, 2012
my computer was unable to access the restore feature hidden on the harddrive on a separate partition. I used the diskpart feature in windows dos prompt to make the restore partition active. Upon bootup, the Gateway restore program comes up automatically and it states it cannot run (memory error). For now, I'd like to just put back the previous partition which was active, but I can't get into the DOS prompt. I made a DOS reboot disk in FAT32, but it doesn't give me access to my harddrive nor does it have the dispart program.Any way to get DOS to work without windows and making this change?
View 2 Replies
View Related
Dec 30, 2012
i have been on various forums for advice but unable to solve - this is the problem -
* it turns on & I CAN get into advanced menus
* it will not repair itself no matter what
* it will not go into any other modes , safe Etc....therefore I cannot restore to factory settings etc....
* ive Tried all tricks such as F8, Alt & F11 etc..... to get into advanced menu settings - all lead to the black screen
* everything i click on enter leads to a black screen - only a white curser appears.
its as if there is no way of accessing the computer disc/ hard drive in anyway from boot up. there is clearly a hardware problem but i cannot access anything internal beyond ordinary & advanced menus i just keep being led to the black screen & no activity. the menus work & that is all. i run Windows 7 on a Dell inspiron 1564.
View 9 Replies
View Related
Jan 23, 2013
This December just been I got a 2Tb hard drive, a stock standard Seagate Barracuda 7200rpm. I have noticed in recent weeks, that when I access this drive, perhaps to copy files, read them, rename them, import files to it, download files to it, etc, etc etc, it causes some pretty shocking instability in my opinion. Programs at random will stop responding, as I type this, skype randomly froze while I was chatting to a friend, and it took 5 minutes to get it to close and restart. On top of this, windows explorer just loses it, it will hang to the point I cant even access task manager, file transfers will crawl along, and random explorer windows will briefly freeze. A corrupted windows install? Corrupted files? Any ideas? I will re-install windows if absolutely necessary, however if its a matter of corrupted files, the files are almost entirely irreplaceable, I would need a way to single out the problematic files and remove them, so I need a method to do this?
View 7 Replies
View Related
Jun 1, 2012
I have installed newly a windows 7 in my pc that it eaither have windows 8 installed in when i boot manage screen is showing only os that i can see is windows 7,i already installed easybcd but it also do not show me windows 8 and actually i do not can boot my windows 8 and use it what can i do?
View 1 Replies
View Related
Apr 17, 2012
I have extracted a HDD from an old PC that ran on Windows XP. I have put it into an enclosure and connected to my Windows 7 Home Premium PC via USB.I cannot open a VHD file. Can I do this with my limited PC knowedge ?
View 2 Replies
View Related
Apr 9, 2011
I am trying to clean up my second internal hard drive in my desktop in which I just upgraded the OS to Windows 7. My second hard drive (D) was the one that I think I had XP on before I upgraded to Windows 7. I installed Windows 7 on the 1st hard drive (C). So at this point I just want (D) to be as clean, empty as possible. But in trying to delete many of the files, it gets to the point where it says Admin approval required. I cant get past that part. I need help with this please. I dont care if I erase the whole hard drive, just want it cleaned up.
View 4 Replies
View Related
Dec 7, 2012
I have setup some monitoring software in an XP Virtual Application. More specifically I used the "Virtual Applications: The 'Invisible' Third Mode" method described here.
My challenge is that I need to access the applications database file, and save it to a location on the host computer. It seems to me that the only way to save files from the Virtual Application is through the program itself, and because the program hasn't been designed to save the database file (e.g.: there is no "File - Save DB" command) I am stuck.
If I had setup a Virtual Machine and then installed the software into it I would have the advantage of being able to access the guest file system, however I would not have been able to start my monitoring software whenever a user logs onto the computer.
Is there any way of accessing the host system of a Virtual Application?
View 3 Replies
View Related
Jan 26, 2011
I have an *.iso file on my hard disc.What is the easiest was to map this �.iso file to a (free) driver letter (e.g. M ?I don't want to burn it on a DVD and access it in my DVD drive? Is there a Win7 built-in way?
View 3 Replies
View Related
Feb 17, 2013
So, i woke up the other day to see my Windows 7 computer is now completely screwed up that i am on right now..C drive is Mirror RAIDed to let you know.It is reporting 74.1MB free of 465GB total on the drive.No matter what i delete, it does NOT EVER free up space.As a matter of fact, some files delete, then come right back, files i've added myself.. weird #1Two, i run chkdsk in windows, it says C drive is a RAW drive and cant scan however it boots up fine to it every time. weird #2So i then use windows repair command prompt to chkdsk /F /R It sees it's NTFS JUST FINE..but reports ZERO errors.. weird #3I scan using Intel Matrix Storage Console in windows, NO ERRORS, weird #4But i am getting Disk I/O errors like crazy in windows logs and in programs, etc.. weird #5I selected all files on Disk C- total space in use under 300gb, but showing 465GB in use.. weird #6Scanned for infections with AVG, no errors, i tried malwarebytes, will not open- 0xc000005. weird #7So i have a drive that can't be read but is read but reporting wrong size but measures right size that has no errors but has errors.
View 5 Replies
View Related
Sep 1, 2011
I took my old desktop HD out and hooked it upto my new Windows 7. teen when I try to even open my 2003 Word Reeume doc it says "Word can not open the document; user does not have access priviliges" It's my resume and all i want to do is copy it to my new comp.
View 4 Replies
View Related
Jan 10, 2011
My old hard drive sounds like it is about to die. So I am wondering, once I install my new HD (format and install windows) will it be possible to hook up my old HD and transfer the files from it to the new HD? I am using Windows 7 and both drives would be SATA.
View 5 Replies
View Related
Jul 10, 2012
I have laptop with one of the windows OS on it and want to transferr OS and all the file to it,problem is i do not have the cd or product key, so i may be able to transfer all the file but how can i transfer the OS and have never paritioned a hard drive either. i have seen the r alot of gatgets out their and on ebay thay sys all u have to do is plug it in to the laptops usb , and plug the new hard drive to the cloner and just transfer all files,, but it says nothing about transferring the OS or MS office 2010 or any thing with product codes so is the any product on the market to transfer everything to new hard drive same speed just from 89GB to 350GB,
View 5 Replies
View Related
Jul 10, 2012
I have laptop with one of the windows OS on it and want to transferr OS and all the file to it,problem is i do not have the cd or product key, so i may be able to transfer all the file but how can i transfer the OS and have never paritioned a hard drive either. i have seen the r alot of gatgets out their and on ebay thay sys all u have to do is plug it in to the laptops usb , and plug the new hard drive to the cloner and just transfer all files,, but it says nothing about transferring the OS or MS office 2010 or any thing with product codes so is the any product on the market to transfer everything to new hard drive same speed just from 89GB to 350GB
View 3 Replies
View Related
Jul 5, 2011
When I access a certain folder in my hard disk, after 2-5 seconds I get a dialog box saying "windows explorer has stopped working" and I get two options "check online" and "restart windows explorer" then I copied that folder to another destination and I could access it but the following days the new destination also started giving the same problem. I used tools like "scan disk" and "defragmentation" but nothing worked. I use Windows 7 64 bit unlimited.
View 34 Replies
View Related
Aug 15, 2010
I am having issues with my external hard drive. It has been working just fine until today. The drive is showing up and I can access a few folders and fewer files, but the majority of the contents are nowhere to be found. It works without a hitch on every other computer in the house but the main one. Running chkdsk says the drive has a RAW file system and chkdsk can't run. This pc is running Windows 7 32-bit (all the others have Windows 7 64-bit) but no idea why I'm having this issue. Yesterday I installed a new printer, did some windows updates, and had a power outage, so I suspect the problem lies with one of those things. I'm really at a loss here as what to do though.
View 5 Replies
View Related
Apr 8, 2011
I have discovered that my external hard drive is showing "unknown file system" hence why it will not show anywhere on the computer for instance under disk management or my computer, is there any way to get around this? like can a file system be recovered?
View 9 Replies
View Related
May 2, 2011
I got pop up in utorrent says a directory is corrupt, I start to run chkdsk on that drive. In this case in have drive letter E. I click on computer, then go to the drive, right click, properties, tools, check now. It says the drive is need to to forced to dismount. I click on ok. then in computers, the drive just show the letter, not size or disk meter. In the open windows on task bar, I did not see scan disk running, or maybe I accidentally closed because I was switching between several programs.
I thought restart pc the drive will show again, but after restart, the drive does not show up, it says 'E: is not accessible, the file or directory is corrupted and unreadable.' I tried to start pc 2 times, still same. I downloaded Partition Wizard Home Edition (minitool partition wizard home edition 5.2) and running it, it showing my files are still in the drive, but not accessible in windows. I also run chkdsk in recovery environment, but still says disk is corrupt, chkdsk cannot continue.
View 14 Replies
View Related
Jan 26, 2009
How to Create a Windows 7 VHD at Boot to Start with from Boot ?
View 0 Replies
View Related
Nov 12, 2011
i am currently having problems trying to tranfer files to my internal harddrive it stated that i have the drive write protected. I have changed permission to full control..both under properties and also under hardrive management but the only thing I have not been able to change is special permissions.. i have also tried changing all inherited children too but these have not helped.. also .. I do have a couple of usb harddrives connected at the same time ..
View 5 Replies
View Related
Feb 5, 2012
So I bought a used 2 TB Hard drive and it supposedly was only used a couple of times and I got a good deal.I plugged it in and the software was installed successfully but it doesn't show up in the explorer with a drive letter. Now when I go to the device manager it does show up but I am not able to format it or give it a letter etc. Also like I said in the title it doesn't have a fat32 or NTFS File System.The hard drive I right clicked is the one I am talking about.
View 4 Replies
View Related
Mar 19, 2012
I have a clients harddrive (XP Home) to extract their data.I just got a Win 7 laptop for servicing computers and discovered I bought a nightmare.I cannot set sharing access to the clients drive in order to extract their files.Any ideas on accessing other drives from Win 7?I have connected this one by USB and even cloned it to empty space on my Win 7 drive.I have been through advanced sharing at the root and every folder I can get to.
View 1 Replies
View Related
Dec 11, 2012
I have a problem with Windows 7 and the c drive. I will try to explain a little bit the situation: have a Dell xps l501x with a home edition windows 7 licence.Since I prefer to use linux, I resized the Windows7 and create another partition for the linux distribution when I bought. So I had Windows 7 and linux (arch linux) working together for some months.I barely used Windows 7 so I decided to use virtualbox to use windows7 (the raw device as a harddrive). And here started the problems, because I ended with a black screen and the mouse pointer in windows7 (the probably was due to a resolution problem)After many months (as I said, I barely used it), yesterday I decided to fix the problem and I managed to do it. But now I have another problem that I don't know how to fix it (I'm not using virtualbox anymore).
When I start windows 7, the wallpaper is black with the infamous "compilation 7600" and many advice that "is not a genuine copy" (actually it is), and a lot of errors at start. Trying to use the OS:- Many application don't work. Even diskmgmt.msc doesn't work.- I can't access C drive, if I tried prompts an error about permissions, even if I change the permissions I can't access. And If I try to see the properties all the values in the c drive are "0 bytes" (size, free space...)Regarding that, I can't download anything.It seem the c drive is not recognized and I suppose that is the main problem.If I boot with the option "Directory Services Restore Mode" I can acces to C and everything seems to work better. And in the properties the values are correct (the size, free space....)
View 3 Replies
View Related
Feb 17, 2012
I'm running on a relatively new install of Windows 7 64bit Ultimate. I recently (about 2-3 weeks ago) installed a new HD and decided to have a fresh start so everything was formatted followed by win 7 install. Everything has been running great up until mid day yesterday. Out of what seems like nowhere I experienced 6 or 7 BSOD's yesterday and from what I could tell they occurred when I tried to do any of the following: 1. Access drive D and play a video file (This is the new HD, it would instantly BSOD). 2. Access internet within 1 minute of startup.
Since yesterday I haven't had any BSOD's and have had the computer running, I haven't tried to play any videos off of HD and haven't reset my computer since (hoping that whatever it was has gone away, although I'm sure it hasn't). For the record I have accessed some music files on drive D without any issue, as well as several word and excel documents (not sure if that makes any difference?)I have a feeling it may have something to do with my new HD that I installed, but have no idea what it could be as it was running without issue up until yesterday (for at least 2 if not 3 weeks).
My system specs are as follows:S: Windows 7 64bit UltimateManufacturer BIOSTAR Group Model A740G M2+ Total amount of system memory 6.00 GB RAMSystem type 64-bit operating system umber of processor cores 2 isk partition (C) 272 GB Free (298 GB Total) isk partition (D) 1630 GB Free (1863 GB Total) isplay adapter type NVIDIA GeForce GTX 460 other info:-all drivers should be up to date to the best of my knowledge- i've looked around and have seen a lot of recommendations to run memtest? I have yet to do soI've enclosed a system health report and minidump file as outlined on forum requirements.
View 3 Replies
View Related
Oct 10, 2012
my employers IT support department has emailed me a certificate which allows me to access my office pc desktop using RDC without the need to establish a VPN to the server.can I now someone map one of the shared drives that is on the main office service again without the need to establish a VPN? perhaps using this "certificate"?
View 1 Replies
View Related
Aug 16, 2009
I have 2 identical drives in my computer. Prior to Windows 7, I had Vista 32 Ultimate installed on drive 1. Drive 2 was used a backup drive.
I have now installed Windows 7 64 on drive 2. To make absolutely sure I didnt screw up my vista installation I removed drive 1 with vista on it from my pc.
I got Windows 7 up and running with no problems on drive 2 by doing a clean install by reformatting the entire drive, then reconnected drive 1 with Vista 32 installed. I can easily control which one I boot up by changing boot order in CMOS. This was done instead of having multiple boot partitions on a single driver for a few different reasons.
With both drives in and booted up under Windows 7 64, I am trying to access the data files on Vista 32. Unfortunately I dont have a drive letter for the vista 32 drive. I went into disk management to give it a drive letter, but I get an error message when I select drive letter. See attached image.
I tried refreshing and trying again but keep getting same error.
Is it possible to access the Data on the other drive under a NTFS partition? I did set the folders I wanted to access as viewable by everyone. the problem is I cant get a drive letter to the disk.
View 3 Replies
View Related
Aug 17, 2011
I can't seem to find a solution anywhere but the problem is. I have one central computer with windows 7 on it. When any computer in the house, whether it be my laptop with Vista, my desktop with XP, or my other desktop with Windows 7 connects to that network drive it hangs for a couple minutes before being able to open the file, or copy the file. This happens on all 3 machines accessing the network drive on the central computer. This same result occurred when I setup my other desktop with windows 7 so that makes me think its something with windows 7 itself.I do not have any firewall/antivirus programs installed, and I even turned off windows firewall and windows defender on the server that were all accessing.
View 1 Replies
View Related
Jun 1, 2012
I have a Windows Server 2008 file server with DFS Namespace role. The server hosts file services and uses DFS-R to replicate content to another member server. One of the folders has a Users directory where PST files are located. When these files are open, DFS-R will not replicate them but queue them in a backlog. Once the backlog grows significantly, the client machines tend to lock up when trying to access the shared drives. The drives are mapped using the DFS namespace, but even navigating using UNC path will still lock up. This is seen with Windows 7 clients and XP clients seems to be fine. If I exclude PSTs from DFS-R the issue does not occur.
I should mention that there is a DPM 2010 server in the environment that backs up the file/print server. The sync is set to every 15 minutes. Recovery points are during the day and XP and Windows 7 clients can lock up if a recovery point is running at the same time as a DFS backlog. If there is no backlog, all seems to run fine. Is there some option in Windows 7 that is attempting to index network drives? I've checked the settings in Indexing Options and don't see anything that stands out. Like I said, I currently have PSTs excluded so the issue does not happen right now, but once I enable them and a backlog starts to build, the issue happens again.
View 1 Replies
View Related
Nov 25, 2009
I am running Win XP SP3 and I plan to upgrade to Windows 7. I currently have two hard disks as one is the system hard disk and the second drive is my data disk (E: Drive).If I upgrade to Windows 7, will I still be able to read the data on the E: drive? If Windows 7 can read the data, would it make sense to back up any files on the system hard disk to the E: drive so I could copy the files back to C: drive after Windows 7 install? All drives are currently NTFS.
View 18 Replies
View Related
