My old hard drive sounds like it is about to die. So I am wondering, once I install my new HD (format and install windows) will it be possible to hook up my old HD and transfer the files from it to the new HD? I am using Windows 7 and both drives would be SATA.
View 5 Replies
I have several USB 3.0 external hard drives and they all seem to exhibit this problem. First, I had a Western Digital MyPassport SE 1TB with USB 3.0. Transfers of 1GB or less are usually fine, but once it gets higher than that, the drive disconnects. It disconnects before the transfer is complete, usually disconnecting about 5 seconds after transfer begins. I thought something was wrong with the hard drive, so I had it RMAd. New drive came back and still didn't work.This year's Black Friday gave me a Western Digital Elements 1TB also with USB 3.0 capabilities.Same as before: files bigger than 1GB will not transfer. And yesterday I was graced with a Western Digital MyPassport 2TB but unfortunately the same problem occurs.
For all of these drives, I can transfer large files through USB 2.0 connections, no problem. I would be happy with this but... I was really looking forward to using my computer's USB 3.0 connection for the faster speeds. I've tried updating drivers for the port but I still have the problem. Does anyone have any suggestions?Here are links to the hard drives:Western Digital MyPassport SE 1TB (mine was new): Newegg.com - Refurbished: Western Digital My Passport Essential SE 1TB USB 3.0/USB 2.0 Black Portable Hard Drive WDBACX0010BBKWestern Digital MyPassport 2TB: Newegg.com - Western Digital My Passport 2TB USB 3.0/USB 2.0 Portable Hard Drive WDBY8L0020BBK-NESNWestern Digital Elements SE 1 TB: Newegg.com - Western Digital Elements SE 1TB USB 3.0 Portable Hard Drive WDBPCK0010BBK-NESN
Here is the link to my laptop: ASUS - Notebooks- ASUS U46EI have the i5 CPU and Windows Home Premium.
is there anyway to limit file transfer speed on the local area network (not the wan port)? I have a tv tuner farm on my server wich I use to stream live tv to other computers on network. Problem is when I start a file transfer it maxs my connection leaving tv unwatchable. I am running windows 7 hp and have a wired gigabit network
View 9 Replies View RelatedStarted experiencing playback lag on most movies that were stored on my E Drive which is a 500gb western digital, taking a movie off that harddrive and placing it on my C drive(150gb WDraptorx) sometimes would hang during the file transfer for 10 minutes then start up again. playback would be smooth if played from my external or main c drive , so i thought this could be my E drive was failing, so i tried a disk check over night but was only 10% when i got up and didn't seem to be moving at all.1week later i get a BSOD and freezes for 15 minutes so i did a hard reset, freezes on loading screen for windows and BSOD once again, once is started up in bios got windows is missing a certain file and prompted me to system restore and was freezing every couple of minutes but completed successfully. 2 hours later i get BSOD and BIOS reports the C drive as BAD. did a check disk for it and had a ton of unreadable sections but it completed, haven't been able to get back to windows since. ATM am trying start up repair but its already on 2 hours +.Should i take the main drive out and install windows on to my secondary or is it possible that they are both failing and should just purchase a new hard drive.
View 9 Replies View RelatedI am running two windows machines, 7x64 in a LAN using Groups. They both have static IP's. If I transfer a file from one machine to the other, the rate is over 100MB per second which is very good. Going the other way, it slows to only 16KB per second.PS: Firewalls and AV turned off.
View 1 Replies View RelatedMy Linksys WRT120N router no longer works, so I bought a D-Link DIR-655, which has Gigabit ports.I have a PC with Win 7 64-bit with an Atheros L1 Gigabit Ethernet built in the motherboard, an ASUS P5B-VM SE. I also have 4 GB of RAM and internal hard disks connected via SATA 2. The PC is connected to the router via a Cat 5 cable with the label "Type CM24AWG UL E188L30".I also bought a Buffalo Linkstation Live LS-CHLV2 NAS with a 2 TB HD, and it's supposed to have a Gigabit port, too. The NAS is connected to the router via the Cat 5 cable included with the NAS.I checked the settings of the Atheros, and it uses "auto" for the media type (other choices range from 10Mbps Half Duplex to 1000Mbps Full Duplex. The maximum frame size is 1514 (the default), and the receive and transmit buffers at 256. There is no "jumbo frame" property in the configurations.The NAS only has frame size for the configuration, and it's currently set at 1518 (the default). Other options are 4102, 7422, and 9694 (all labeled as "jumbo" frame sizes).
I ran LAN Speed Test from the PC with a folder in the NAS as the destination, and the results for a 100-MB file are 34 Mbps for writing and 71 Mbps for reading.I experimented by setting the Atheros media type to 1000Mbps Full Duplex and the maximum frame size to 9694. I went to the NAS and set the frame size to the highest, 9694. The transfer speed became worse.I could not find any settings in the router except for MTU for Internet connections, but I think that's not used for network file transfers, so I did not change it (the default is 1500).I would like to know if the system and components I have are supposed to be enough to do file transfers between the NAS and the PC that are faster than the results I've gotten.Also, is it necessary to modify Ethernet configurations?Finally, I do not what else to do except to do the LAN Speed test using the ff. options:
1. connect the NAS directly to the PC
2. connect to another PC, probably a laptop, that has Gigabit ethernet and is connected to the router
3. buy two cables that are identified for Gigabit networks and to replace the ones connecting the PC and the NAS to the router
I have moved to Windows 7 Ultimate x64 for almost half a year, recently my hard drive was getting full and I decided to move some of the data to usb external hard drives. Both the externals I have are IDE hard drives and both are NTFS. I always use Quicksfv to make a CRC check file before I transfer the file and then run the CRC check after its been copied over to the external drive. I have used these externals in the past with Windows XP and had no problems.
However, on Windows 7 when transferring large files (usually over 1GB in size), I get corruption in the files. The corruption occurs randomly, if I recopy the files again it might be corruption free. This only occurs when copying files from internal to external, if I copy files from the external to my internal there's no corruption at all. I have tried changing the usb cables, power cable of the externals, using different usb ports but none of it helped. I scanned both externals with chkdsk and I used memtest+ for over 24hours and all the tests passed fine.
So let me explain my situation. I have a 15 month old laptop, with a dying hard drive. Quite frequently when it spins up, the hard drive makes a horrible buzzing/scraping noise. I decided I will invest the money and replace it for the $100 and get a faster one (7200 rpm).
Here's the catch. I have an upgrade disk on order, and only an OEM backup disk (Vista) to reformat.
Whats the best way to replace the hard disk and use an upgrade media to use 7 on my computer?
My PC's Windows Experience index rating is currently at 5.9 due to my HDD. It's a Seagate Barracuda 7200.10 500GB. Which HDD should I look at to get more performance out of the rig? All the other fields are in the 7.0 to 7.6 range.
View 6 Replies View Relatedi have a retail upgrade version of windows 7 professional x86 am i able to format the hard drive using the disk...i dont want to use it to install windows 7
View 4 Replies View RelatedI would like to install Win 7 to a new Hard Drive. I have the Win7 Upgrade CD. I have XP running on an old HD that came with the original PC. how I can do this?
View 6 Replies View RelatedI did an image backup to move my programs from one hard drive to another, this worked fine. But when i re-sized the partition to give myself extra room in storage, programs stopped working from the ati graphics software to google chrome,etc. also i got the message that my system is low on RAM.
View 9 Replies View RelatedI currently have Win 7 Home 32 bit installed. I will be upgrading my system and using a new Sata hard drive.I would like to install my Win 7 retail upgrade disk [ the 64 bit version ] on the new drive.Can I do this? If so what would be the easiest way to retain all information from my current 32 bit drive?
View 9 Replies View RelatedI have an HP s5-1200z computer with Windows 7 Home Premium 64 Bit. I have been reading and trying different things for the last three days trying to upgrade my hard drive. The computer came with a 500GB and I want to use my 1TB instead. The first thing that I did was create a system image and a system repair disc. I then restarted my computer and booted from the system repair disc. I selected my keyboard setup and then received an error stating �This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows�I can not figure out why I am getting this error message. Many post say that it is because 32 bit vs 64 bit. My computer is 64 bit and the repair disc that I made is 64 bit as well. With no luck on upgrading my hdd I decided to take a different approach. I then cloned my 500GB to my 1TB using Easeus Partition Master Home Edition. Everything seems to be on the 1TB HDD it stated it was successful. I then removed the source hdd and installed the 1TB destination hdd, I turned the computer on and received an error "bootmgr is missing press ctrl+alt+delete to reboot." I also spent many more hours researching this problem, I can not find a solution. Many articles say boot from system repair disc and click repair your computer" when I try to do that I still continue to receive the error "This version of System Recovery Options is not compatible with the version of Windows you are trying to repair. Try using a recovery disc that is compatible with this version of Windows"I have read that having more than one hdd connected at once can cause boot errors. But I do not believe this is the case because my computer can only hold one hdd.I also downloaded the Windows Home Premium x64 from mydigitallife to try and repair my pc from there only to receive the same error.
View 5 Replies View RelatedI have a bit of a strange question about installing the Windows 7 upgrade. I'll try to keep it as simple as I can. Firstly
1: I currently have Windows XP SP3 Home Edition installed (and activated) on my 160GB WD Caviar Blue hard drive, which has 8MB cache. It's getting a bit full now.
2. This hard drive is one of the few remnants of a Dell machine I bought a few years ago.
Surprisingly, the restore disk still works and activates, even though I've changed the motherboard and a number of other things over the years. My last reinstall was about a year ago, and I had no problems reactivating whatsoever - I didn't even need to phone Microsoft.
However I doubt it'll install and activate on a new hard drive - particularly as I've also changed the DVD drive since my last activation (as the old one broke), literally the only things remaining from the old system would be the RAM and the processor.
2: I have purchased a 500GB WD Caviar Blue with 16MB Cache
3: I intend to buy Windows 7 Pro Upgrade from TheUltimateSteal for £30. I'm a student, but will be graduating soon, so it seems sensible to take advantage of this offer while I can.
4. Clearly I can install Windows 7 in the normal way onto my current drive and use the 500GB drive for backing up my files, which I'll do if that's the only option.
5. However, if I did that I would not be taking full advantage of the extra cache of the new drive. It would be nice if I could use that for my primary installation to speed things up a bit.
So here's my question:
If I start the upgrade process having booted from the 160GB drive, but during installation select my 500GB drive as the target for the installation, will Windows 7 install and activate correctly? Will it recognise the pre-existing installation, even though it was on a different drive?
If not, then:
If I install my Dell restore disk on the new drive, and don't activate Windows (which presumably I won't be able to), and then run the Windows 7 upgrade on THAT drive, will Windows 7 install and activate correctly?
Basically, is there a legitimate way of installing a Windows 7 Upgrade onto the 500GB drive, on the basis of there currently being a valid XP installation on the 160GB drive?
I have no intention of continuing to use XP after the upgrade, if I am able to install and activate Windows 7 to the new drive, then this will serve only as a backup for my files.
Has anybody tried something similar and succeeded/failed?
I've already read the tutorials on here about doing a clean install of Windows 7. I'd like to avoid dodgy workarounds, as I'd rather not run into problems further down the line when it comes to updates and that sort of thing.
So I'm building a new computer completely from scratch, save for the hard drive, which I'm recycling from my old system. The hard drive currently has Windows XP installed.
My question is, can I upgrade the system with this? [URL]
Also, I plan to eventually buy a new hard drive. This presents a dilemma, because at the moment I can only afford the OEM or Upgrade versions of Windows 7. I read an article on PC World that claims there is a way to do a clean installation of Windows 7 using an Upgrade license. Here's the article: [URL]
Anyways, is that method still valid? Have any of you guys heard of it before?
I'm considering buying the Upgrade version of Windows 7 Home Premium, but I do not want to make the purchase only to realize later that I can not use it.
Really, I'm just looking for a solution. The only thing keeping me from buying Windows 7 OEM is the installation limits (can only install on one computer per license). When I get my new hard drive, I'd like to be able to use whatever version of Windows 7 that I own on it.
I have an HP desktop running windows vista that will soon be passed on to me. If I buy an "Upgrade" version of windows 7, is there a way to completely and totally wipe out the hard drive and upgrade, or would I have to buy the more expensive "full install" version of 7?
View 9 Replies View Related1. My sister has a Dell Dimension 5100 desktop computer with Windows XP from the factory. Can I put the Windows 7 UPGRADE version on a second hard drive in her machine? Is this OK or do I need the 'FULL' version?
2. Is this automatically going to create two options when booting the machine, giving her the options to boot either into XP or W7?
I have a dell inspirion 1505. I just upgraded my Ram and my hard drive. My computer came with a 80GB hard drive, but when i tried to replace it with a new 500GB hard drive my computer still only recognizes it as a 80GB. During the windows 7 upgrade where i would normally be able to clear my new hard drive and specify my new drives it still only showed 80 GB.
i have talked to dell twice now and i get conflicting answers each time. The first person said that my computer would only support 120GB and the second said it would only support 100GB. I have a hard time believing this because my computer came with a SATA harddrive, which shouldnt limit me.. At least i thought.
I want to format and 0 write and wipe the entire hard drive in an Asus EEEPC with no system disc and re-install windows 7 home premium. The windows registration number is on the back of the computer.
Did not come with a windows disc or recovery disc from the factory, IE windows 7 home pro was pre-installed.
I created a system recover boot disc/CD. This machine has no CD/DVD drive, but I do have a USB CD/DVD drive.
If I format and write the drive, but leave the partitions will I be able to re-install this version of windows that came with the machine ??
I am trying to clean up my second internal hard drive in my desktop in which I just upgraded the OS to Windows 7. My second hard drive (D) was the one that I think I had XP on before I upgraded to Windows 7. I installed Windows 7 on the 1st hard drive (C). So at this point I just want (D) to be as clean, empty as possible. But in trying to delete many of the files, it gets to the point where it says Admin approval required. I cant get past that part. I need help with this please. I dont care if I erase the whole hard drive, just want it cleaned up.
View 4 Replies View RelatedMy old computer was put to rest with a big power surge last week. I had to buy a new computer and now I would like to access my old files. I have taken the hard drive out of my old PC. My new PC of course has windows 7. I am not a computer expert but I am not a novice either. The old hard drive has the sata connection and I have a sata cable, but have never used one previously. I connected the cable to the old hard drive and then plugged in the power cord to the wall outlet. I then I connected the USB cable from the sata cable connected to my old drive to my new PC�s USB port. I haven't been able to access the files on the old drive but I know my new pc has recognized the hardware. After I connected the USB cable to my new pc under Devices I can see a hardware named USB to ATA/ATAPI Bridge. Not sure what that means. There is �No� drive listed for it though when I open Windows Explorer. I can only see the (OS) C drive and the HP Recovery D drive.
View 4 Replies View RelatedI have an *.iso file on my hard disc.What is the easiest was to map this �.iso file to a (free) driver letter (e.g. M ?I don't want to burn it on a DVD and access it in my DVD drive? Is there a Win7 built-in way?
View 3 Replies View RelatedSo, i woke up the other day to see my Windows 7 computer is now completely screwed up that i am on right now..C drive is Mirror RAIDed to let you know.It is reporting 74.1MB free of 465GB total on the drive.No matter what i delete, it does NOT EVER free up space.As a matter of fact, some files delete, then come right back, files i've added myself.. weird #1Two, i run chkdsk in windows, it says C drive is a RAW drive and cant scan however it boots up fine to it every time. weird #2So i then use windows repair command prompt to chkdsk /F /R It sees it's NTFS JUST FINE..but reports ZERO errors.. weird #3I scan using Intel Matrix Storage Console in windows, NO ERRORS, weird #4But i am getting Disk I/O errors like crazy in windows logs and in programs, etc.. weird #5I selected all files on Disk C- total space in use under 300gb, but showing 465GB in use.. weird #6Scanned for infections with AVG, no errors, i tried malwarebytes, will not open- 0xc000005. weird #7So i have a drive that can't be read but is read but reporting wrong size but measures right size that has no errors but has errors.
View 5 Replies View RelatedI took my old desktop HD out and hooked it upto my new Windows 7. teen when I try to even open my 2003 Word Reeume doc it says "Word can not open the document; user does not have access priviliges" It's my resume and all i want to do is copy it to my new comp.
View 4 Replies View RelatedI have laptop with one of the windows OS on it and want to transferr OS and all the file to it,problem is i do not have the cd or product key, so i may be able to transfer all the file but how can i transfer the OS and have never paritioned a hard drive either. i have seen the r alot of gatgets out their and on ebay thay sys all u have to do is plug it in to the laptops usb , and plug the new hard drive to the cloner and just transfer all files,, but it says nothing about transferring the OS or MS office 2010 or any thing with product codes so is the any product on the market to transfer everything to new hard drive same speed just from 89GB to 350GB,
View 5 Replies View RelatedI have laptop with one of the windows OS on it and want to transferr OS and all the file to it,problem is i do not have the cd or product key, so i may be able to transfer all the file but how can i transfer the OS and have never paritioned a hard drive either. i have seen the r alot of gatgets out their and on ebay thay sys all u have to do is plug it in to the laptops usb , and plug the new hard drive to the cloner and just transfer all files,, but it says nothing about transferring the OS or MS office 2010 or any thing with product codes so is the any product on the market to transfer everything to new hard drive same speed just from 89GB to 350GB
View 3 Replies View RelatedI am having issues with my external hard drive. It has been working just fine until today. The drive is showing up and I can access a few folders and fewer files, but the majority of the contents are nowhere to be found. It works without a hitch on every other computer in the house but the main one. Running chkdsk says the drive has a RAW file system and chkdsk can't run. This pc is running Windows 7 32-bit (all the others have Windows 7 64-bit) but no idea why I'm having this issue. Yesterday I installed a new printer, did some windows updates, and had a power outage, so I suspect the problem lies with one of those things. I'm really at a loss here as what to do though.
View 5 Replies View RelatedI have discovered that my external hard drive is showing "unknown file system" hence why it will not show anywhere on the computer for instance under disk management or my computer, is there any way to get around this? like can a file system be recovered?
View 9 Replies View RelatedI got pop up in utorrent says a directory is corrupt, I start to run chkdsk on that drive. In this case in have drive letter E. I click on computer, then go to the drive, right click, properties, tools, check now. It says the drive is need to to forced to dismount. I click on ok. then in computers, the drive just show the letter, not size or disk meter. In the open windows on task bar, I did not see scan disk running, or maybe I accidentally closed because I was switching between several programs.
I thought restart pc the drive will show again, but after restart, the drive does not show up, it says 'E: is not accessible, the file or directory is corrupted and unreadable.' I tried to start pc 2 times, still same. I downloaded Partition Wizard Home Edition (minitool partition wizard home edition 5.2) and running it, it showing my files are still in the drive, but not accessible in windows. I also run chkdsk in recovery environment, but still says disk is corrupt, chkdsk cannot continue.
How to Create a Windows 7 VHD at Boot to Start with from Boot ?
View 0 Replies View Related
