No Valid Windows Installation Disc Can Be Detected
Jan 16, 2013
My computer ended up with the malicious toolbar iminent. After multiple attempts to remove it I decided to reformat the computer, since my last backup is mercifully recent. However, when I attempted to run a repair disc, but in the middle of this I received the message in the thread's title. What's wrong? Is the repair disc something other than the disc I need? While writing this via my phone I'm currently trying an alternative of restoring my computer from a system image on my backup drive, I don't know if that will solve the problem. But even if it does, I think I should still try to find out what went wrong here for when something goes wrong in the future.
View 9 Replies
ADVERTISEMENT
Feb 9, 2012
Is there any way to use a windows 7 Ultimate Upgrade disc as a installation disc? Or would I have to go out and get another Windows installation disc and then use the upgrade disc?
View 6 Replies
View Related
Dec 27, 2012
my office 2003 will not load on my asus laptop running windows 7 home premium.claims the key is not correct. i have loaded the same office 2003 disc on my other computer running xp. the key is not miss-typed and is valid.
View 4 Replies
View Related
Jan 7, 2012
not show for disc data open data to tray open
View 1 Replies
View Related
Jun 11, 2010
I tried to reformat my dads hard drive to reinstall windows 7. It was in 2 partitions, so I ran the windows 7 disc and it ran through the motions, I formatted the c to re-install windows and it wouldn't let me. I went into dos under diskpart to try and format it that way, still no luck. I connected it to my computer then under disk management deleted the 2 partitions so there was only 1 now which had the size i.e, 600GB Unallocated. I connected it back into my dads computer and ran the set-up again. Now the computer wont even detect the drive. I need to re-format the drive to like factory default, is this possible, also do I have to do it in dos.
View 6 Replies
View Related
Jan 23, 2012
Just today, I decided to reset the BIOS to default settings by resetting the CMOSI used a metal screwdriver to touch the two cmos pins on the motherboard. The problem is, the computer WAS turned off BUT I forgot to pull the plug out of the power supply before resetting the cmos which is what caused the problems. It ended up booting the computer so I waited for it to load and when it got to the screen that said loading operating system underneath it it said missing operating system. I've researched this and checked my bios settings to make sure the hdd was the first boot priority choice and it was.After a few failed tries to get it to work, I was almost convinced my hdd's were fried. I tried re-installing windows 7 by booting to the dvd first, but during installation, when i got to the box that makes me choose my hdd no hdd's were listed. I brought up the command prompt to do a chkdsk and I got the message "This drive is in raw format". After that, I turned the pc off, unplugged the power cord, and took the hdd's out. I reformatted them by connecting them to a startech device and connecting that to my laptop (which is not the tower the drives were originally connected to).
After reformatting to ntfs, I ran chkdsk /f/r on both my hdd's. After this, I'm convinced that my hdd's aren't fried otherwise the device wouldn't have picked them up in the first place. I thought they'd be good to go after the chkdsk ran on both of them but i'm having the same problems trying to re-install windows 7. The only progress now is, I can actually run chkdsk with the drives back in my tower which i'm doing right now.In the dialog box, it said something about loading drivers? I thought the computer would pick up the hdd's anyway because i've re-installed win7 before and never had these issues. So what's your suggestions? Am I going to have to find the drivers for the hdd's and install them before reinstalling win7
View 5 Replies
View Related
Dec 15, 2011
I am running windows 7 sp1 and downloaded the german language service pack.but i can t install it and at the end of the progress it fails, with out mentioning the reason or giving an error.I didn t do that from windows update because i wanted to have the installation file for the future, after reinstalling windows.By the way, i have enough free space on windows drive, have downloaded the same 32- bit as the system, and the installation file doesn t seen to be corrupted.I also try to install it, instead of double-clicking- by going to region and language sections and install from there, but in browse window i can t give the installion file to it and it says that : no valid installation package is founded in this folder.
View 2 Replies
View Related
Jul 15, 2012
To start off, I've been having massive problems with my current laptop. Mainly just the OS which started going wonky after a Microsoft update about a month back. Ever since, I've had to deal with slowness, lagginess and many errors. After trying to fix these things manually, such as updating, removing old files I don't need as well as programs, I had to eventually give in and do a system restore. And this is where my other problem begins. For one reason or another, the previous restore points I had are mysteriously gone. I only had one from around 2 days ago. All the ones I had from as far back as a month are history. Why I do not know. I usually check up on that to make sure I have one from way back. Perhaps I may have deleted them without knowing. So much to that.
I really want to do a complete reformatting or system installation. A clean one. However, my DVD drive doesn't recognize or acknowledges any of my OS discs. None of them. And they're all purchased from Microsoft. Not even the ones that came with my laptop are working. All other discs work. Such as DVD's as well as regular CD's. I updated the DVD drivers and still nothing. I tried Fixit and still nothing. I don't get why it only does this with the Microsoft installation discs.Currently, I am using Windows 7 Ultimate on a Dell Precision M4400. 32bit. The DVD/CD is a Toshiba TSST corp DVD+RW TS-U633A. I already tried cleaning the DVD drive as well as making sure all the installation CD's have no signs of damage. And they don't.
View 5 Replies
View Related
Jan 15, 2013
I reinstall windows a lot of times. I'm afraid that the Windows 7 installation might get scratches. So, I want to take a backup copy of the disc.
I want to know if it is copy protected or something or if I can directly copy it using an image burning software.
View 2 Replies
View Related
Jan 15, 2013
I reinstall windows a lot of times. I'm afraid that the Windows 7 installation might get scratches. So, I want to take a backup copy of the disc. I want to know if it is copy protected or something or if I can directly copy it using an image burning software.
View 2 Replies
View Related
Jun 6, 2011
I have a new sata3 SSD drive on which I want to install Windows 7. The PC has an existing build of Windows 7 on a different disc which i want to reformat & use for data. I tried this previously and ended up with a dual booting system. Trying to remove the old Windows 7 installation and format that disc created much trouble so now I'm starting again, how to: Install Windows 7 on the new SSD disc (I'm assuming this will work ok as I've done it before), Have the system recognise only the new Windows 7 installation at boot & not the old Windows 7 installation so I don't have to select which OS to use, Reformat the old Windows 7 disc and remove any boot references that it might hold.
View 5 Replies
View Related
Jul 16, 2012
To start off, I've been having massive problems with my current laptop. Mainly just the OS which started going wonky after a Microsoft update about a month back. Ever since, I've had to deal with slowness, lagginess and many errors. After trying to fix these things manually, such as updating, removing old files I don't need as well as programs, I had to eventually give in and do a system restore. And this is where my other problem begins. For one reason or another, the previous restore points I had are mysteriously gone. I only had one from around 2 days ago. All the ones I had from as far back as a month are history. Why I do not know. I usually check up on that to make sure I have one from way back. Perhaps I may have deleted them without knowing. So much to that.
Next problem:I really want to do a complete reformatting or system installation. A clean one. However, my DVD drive doesn't recognize or acknowledges any of my OS discs. None of them. And they're all purchased from Microsoft. Not even the ones that came with my laptop are working. All other discs work. Such as DVD's as well as regular CD's. I updated the DVD drivers and still nothing. I tried Fixit and still nothing. I don't get why it only does this with the Microsoft installation discs.
View 3 Replies
View Related
Dec 23, 2012
So, I would like to make a custom windows 7 professional installation disc.I would like the installation of:Vlc playeruTorrent.Google chrome browser.Ccleaner.Defraggler.nd remove unnecessary programs / functions of the Windows installation disc.So, what I need to do to make these things succeed?
View 2 Replies
View Related
Jan 21, 2012
I have a product key from my laptop but when my computer crashed I couldn't get the old OS back. I still have my product key, how can I reinstall windows 7 without buying a new one?
View 2 Replies
View Related
Jan 3, 2013
i am currently running Windows 7 32 bit and want to upgrade to 64 bit. There are some programs installed like Microsoft office which i want to keep so i want to install 64 bit on a partition. i have my product key and I am running windows professional.
View 6 Replies
View Related
Dec 14, 2011
I'm on an HP laptop that originally came with Windows Vista. At some point a while back, I purchased Windows 7 online and upgraded the OS by download--meaning I don't have any physical installation discs.
Now I would like to some how recover this computer to it's factory settings, to wipe all installed programs and files, but I would prefer not to be downgraded back to Vista. Is this possible?
I don't believe I made recovery discs while Vista was installed either. Is it possible to recover the computer at all?
View 8 Replies
View Related
Jun 16, 2010
I have a Windows 7 installation disc that I created. It has worked in the past because I have Windows 7 running on this computer now. I wanted to reformat but disc is not booting. Have gone into Bios and checked that, 1 as DVD, 2 as HDD no probs seemingly there. I have also tried it on another laptop with the same result.
View 8 Replies
View Related
Feb 28, 2012
my computer has Windows XP 32-bit, and i'm trying to do a clean install to Windows 7 64-bit. this is my processor. i'm assuming it can take the 64-bit version. i boot from the disc, press any key, and all the files load and whatnot. i see a screen that says "starting windows", and the logo appears. i figure that's a good sign. but...after that, i get stuck on a screen with nothing but some "desktop wallpaper" and my mouse. it just sits there. i can move my mouse around, but no installation options pop up. i bought the upgrade version of Windows 7, and i'm under the impression that you should be able to do a clean install using those discs. i stuck the 32-bit disc in my drive, and the install menu showed up no problem. but i want to install the 64-bit version.
View 9 Replies
View Related
Jul 30, 2011
How do I do this? I'm curious so that I can buy and download windows 7 to run bootcamp instead of having to go to the store.
View 9 Replies
View Related
Aug 18, 2012
I am trying to access my BIOS,cannot use f8 or any f to access,cannot load from my original disc yet it loads when the hard drive is not installed?
View 8 Replies
View Related
Sep 15, 2011
Is it safe to burn a Windows 7 installation ISO image using the 'exact copy' option, meaning making an exact duplicate from an already existing CD. Or is it safer to burn a CD from the original ISO file? Wouldn't the 'exact copy' option have higher chances for data corruption, especially since it is a boot/installation CD?
View 4 Replies
View Related
Dec 20, 2012
I am trying to install Windows 7 onto my laptop as I want to do a clean install to wipe off everything and have windows freshly put on. My cd/dvd drive cannot read the disc. You can here the drive attempting to load up the disc but to know success. I have tried Microsoft Fix, does not work (however, it has in the past as well as booting from disc at startup-that too has worked in the past), I have tried booting from the cd/dvd drive on bootup, I have attempted to go into the registry and delete lowers installers I think its called (I didnt do this on previously installation attempts and I installed fine). I have all correct drivers according to my laptop, plus I've gone into the packard bell website to download the correct drivers and I have used windows update too in case I am missing anything. Nothing is working.
View 9 Replies
View Related
Aug 19, 2009
I'm using Win 7 Professional x64 rtm from MSDNAA.
When i try to create a clean install, everything goes smooth untill the Partition selection screen. I get a "no drives were detected" notice and the list is empty. It offers the Load drivers option but i dont really know where to get them.
I have Striker Extreme motherboard, and a wdc wd5000aaks SCSI hard drive (connected via SATA).
Im running Vista Ultimate x64 at the moment. If i use vista's install dvd to see if it finds hdd drive during installation, it does find them. Also if i try to use Windows 7 installer from within Vista, win 7 installer finds my hdd normally.
What should i do?
View 3 Replies
View Related
Feb 29, 2012
My Emachine has Windows 7 Home Premium 64-bitWhen I turn on my computer I get a black screen with an error message and asking I insert the Windows Installation disc. Unfortunately, I don't have one. Never came with computer. The error message is regarding the following:File: BootBCDStatus: Oxc0000011
View 8 Replies
View Related
Oct 10, 2010
I am still quite puzzled as to how are you supposed to install the Windows 7 OS without an actual CD? I've only done it previously with XP home edition and I had a CD. If you still do not understand what I mean, I'm confused on how will the OS, during installation, gather the information when there's no CD inside to read from?
My second question would be, which one of the versions (Home, Professional, Ultimate) is the best for GAMING? I have no need for security, but anything that would make my games, internet, etc run smoother would be of use.
View 3 Replies
View Related
Sep 6, 2010
I want to format my HD, but downloaded windows 7 because i'm impatient.. i know you can't do it without the disc, but is there anything to do about it?
View 8 Replies
View Related
Apr 7, 2011
Im attempting to upgrade from vista 32 to windows 7 on an hp compaq presario cq60 with and AMD athlon Dual Core @ 2.10ghz. When i place the windows disc into the dvd drive nothing much happens. It makes a few noises then nothing. It's an optiarc dvd rw drive which otherwise seems to be working fine. I've already used the 32 bit and 64 bit discs to upgrade on my two other machines so i know there isnt a problem with them. I have checked that the drive is first in line for booting the machine but to no avail.
View 7 Replies
View Related
Nov 17, 2010
How do I create a reinstallation disc for W-7 which was preinstalled on my Lenovo computer? Note: this would be in case my hard drive fails so that I can reinstall W-7 on a new hard drive. My first computer came with the disc (Win-ME). My second computer had a procedure where I was prompted to create/burn a disc of W-XP when I first started the computer. This time - nothing. I contacted Lenovo and they said I would have to pay $40 for such a disc!! Isn't there some way I can do this myself for free? I asked Lenovo about creating a System Image disc but they said it wouldn't work because I couldn't boot from it. (Note: the computer did come with a CD which has the drivers on it).
View 9 Replies
View Related
Mar 4, 2010
i have the evaluation copy of windows 7, so when it expired i bought windows 7. i want to install it, but my dvd drive does not "see" a disc. my driver is MagicISO and the device manager says it's working and updated.
View 8 Replies
View Related
May 28, 2010
After successfull installation few months ago, and perfect operations, I had lately to decide to re-install everything following a tough virus issue. My problem is, when booting from the original Windows 7 pro 64 installation disc, I get the following message:
Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not ......
File:windowssystem32configsystem
Status: 0xc0000001
Info: Windows failed to load because the system registry file is missing, or corrupt.
I cannot understand this message, because I am using the original installation disc.
PS: My HDD is already formated via 3rd party application.
View 1 Replies
View Related
Mar 5, 2012
My laptop died and until i can get it fixed, i am borrowing one. I have a LG 3G modem and use Verizon Wireless. How can i get the modem to work on the borrowed laptop? I don't have an installation disk and there are no numbers on the modem itself?
View 2 Replies
View Related
