I am an IT student who is forced to use a VM to run Windows 7 Professional and Server 2008 R2 Enterprise. I currently own a Macbook Pro and am not able to afford another windows based pc for school. I was told by a teacher to Dual Boot both of these under the same partition. Ive tried to understand all of this and ask ?'s but I'm getting really lost.
View 5 Replies
Tried tackling this one single-handedly to begin with and failed.
I have Windows 7 and Windows Server 2008 R2 installed as a dual boot, different partitions single HDD.
I want to remove the Windows 7 partition and keep the Win 2008. I do NOT want to lose anything from the Win 2008 partition. Taken from Disk Management.
Disk 3 with 5 partitions
1st - Healthy, Primary partition 73MB. (I thought this was system reserve but its not, leftover space from a previous partition change). It's currently mounted and completely empty.
2nd - Unallocated space 500mb
3rd - Windows 7 OS (Healthy - system, active, primary partition)
4th - Windows 2008 Server OS (Healthy - boot, page file, crash dump, primary partition)
5th - Unallocated space 8mb'ish
I haven't been using Windows 7 for years and want to clean this drives partitions up because it's messy and wasting space. I just need windows server 2008 as it's been used as a server for years and that's all I need it for now.
I want to safely remove the windows 7 installation and merge that partition along with the 1st and unallocated spaces back into a single partition where windows 2008 server resides.
Now I've tried tackling this myself and failed. I stupidly made the windows server 2008 partition as active which killed my boot and took me forever to repair with zero loss fortunately. Sadly it was as simple as using diskpart in a command prompt from win 2008 boot disk to make win 7 partition active again.
So, how do I do this? The boot manager must be on the win 7 partition as removing active killed it. The windows 7 boot (during startup) is long removed, system boots directly to windows 2008.
I am TRYING to get a dual boot set up on my new Win 7 machine. I have found numerous blogs etc. that detail the process, and I know I'm close, but I am getting a message that seems to say I've got a problem, and NONE of the blogs even mentions it. Very frustrating.
I have a basically BRAND NEW Win 7 Home Premiem machine. I have gone through the process to 'deallocate' a portion of the HDD. BUT when I try to go through the process for giving it a drive letter/format so I can then install Win Server 2008, I get the following message:
"The operation you selected will convert the selected basic disk(s) to dynamic disk(s). If you convert the disk(s) to dynamic disks, you will not be able to start installed operating systems from any volume on the disk(s) (except the current boot volume). Are you sure you want to continue?"
At this point I just have clicked NO, but what do I need to do to accomplish getting a dual boot with Win 2008 Server?
I have a desktop that I installed Windows Server 2008 Web Edition on, and then later added Windows 7 Pro on a separate physical drive.
Server 2008 is C:
Windows 7 is Z:
I used bcdedit to delete the boot entry for Server 2008, and now I'd like to remove the install of Server 2008 and reformat the drive. However, I am not able to delete the volume or format the c drive.
Have been a LONG LONG user of Linux as a server (hosting VM's XP / Windows 7 mix) and file / print sharing.
I used to avoid MS like the plague as far as SERVER environments are concerned - probably because my first experince was Windows NT (Windows NeanderThal or Windows No Thanks) which was SO HORRIBLE that it put me off Windows servers for ages.
(Note I'm using a server in a HOME environment where we have around 8 machines (most of which are actually mine for testing -- not a corporate environment which has other considerations).
The problem now with the latest Linux distros that they are trying to be "A Better Windows than Windows". You can of course customize them but I haven't got the time or patience to do this any more. To select what packages to install / leave out now is a 100% pain and if you do it wrong the chances are the system will give errors.
I've looked at the new SUSE 11.2 -- slick and polished - bit I don't NEED "an alternative Windows".
I've just been looking at Windows Server 2008 R2 (got it from Technet) and I'm REALLY IMPRESSED with it so far. I've installed the STANDARD version - you don't need datacenter or Enterprise version for a home server.
It runs vmware server on it just fine (although I might go the whole hog and use the Hyper-V virtualisation -- need to do a bit more research).
I'm quite happy letting MS do the updates than having to mess around with Kernel compiles etc.
Incidentally as a HOME server there are some considerations that you might want to do to make it more like a Desktop OS than a pure server for example add multi-media to it.
This guy does a great job at this .
Convert your Windows Server 2008 R2 to a Workstation! - Multiboot Installation
Windows 7 VM's run just fine on W2008 server (they should as there is a lot of common code).
I have a Server 2008 with Fax service installed and working. I cannot get either my Win 7 workstations nor my XP workstations to connect to the fax server. Both can connect to \serverfax as a printer, but neither can actually function.The Win 7 Fax & Scan says "You do not have security permissions to complete this operation" when I try to add the \server as an account. XP says something similar.
View 9 Replies View Relatedget a bootable USB flash drive that installs any version of Windows 7, either platform, and it's been working out great.
how to add Windows Server 2008 R2 to the mix?
The Microsoft website is mostly geared for corporates, so how does a home user get a copy of Windows Server R2?
I want to use it for Sharepoint 2010 Foundation self training as I am interested in learning more about multi tenancy. Is there a cost effective way I can achieve this?
For testing i have used a one month trial version of windows 2008 R2 server.Now i need format that windows 2008 R2 version and install XP sp2 over it. when i am trying to install it , with out any boot from Cd option it is directly jumping to 2008 server OS.
View 8 Replies View RelatedRunning Windows server 2008 as a VM using vmware workstation (am testing at the moment before I move it to ESXi)I can't get Aero activated.
Not a real problem but it would be nice to enable it -- I've plenty of Machine resources so I'm sure its not a lack of graphics etc.
Windows 7 Virtual machines seem to work just fine with Aero enabled.
I need to use Windows 7 for some reasons. Currently, I'm using Windows Server 2008 on my pc to do my works. So, I'm thinking to install Virtual PC on my Windows Server 2008 and then, install the Windows 7 into the Virtual PC.
View 8 Replies View Relatedhow to club (combine) windows 7 with windows server 2008 in single dvd ?
View 5 Replies View Relatediam trying to create one domine in vm ware.i am install one server os 2008 and windows 7 client os.in 2008 installed adds.but in client pc can't support connect to network.
View 2 Replies View Relatedi want to install windows server 2008 enterprise 32 bit in the VMWAre and after installing I want to use all the features
View 4 Replies View Relatedwhat is the best FREE anti-virus for Win-7 and server 2008 Standard?
View 4 Replies View RelatedI just got a Dell server from a friend and want to install Windows 2008 Server on it.The thing is when I start installing it, when I have to decide the location I don't see any hard drive.I guess it's a problem of sata drviers, but I don't find any on the web... I forgot to mention that there is a Raid controller (I don't know if this can make any difference...)
View 3 Replies View Relatedi have following problem. At work we have HP proliant ml350 server with windows server 2008 on it, 3x windows 7 client and 25x win xp sp2 clients. Network doesn't work, clients cant see each other, can't see server and server can't see them in network and sharing center. What could be a problem? Is ipv6 protokol on windows 7 obstructing a server or something else?
View 2 Replies View RelatedI am getting BSOD on lenovo T510 ( i7 M 620 Processor, 8 gb Ram).the mesaage says nvlddmkm.sys error on BSOD.The Laptop works fine .I am trying to enable Hyper v on the Operating system.In order to use it i have to enable virtualization and memory protection in Bios.If i enable both virtualization and memory protection i get Bsod. If i enable only one of them it works fine but do not solve the purpose,as i need to enable both in order for Hyper v to work.I have attached the required files in attachment.I Is Windows 2008 server R2 . . . x86 (32-bit) or x64 ? 64 Bit - the original installed OS on the system? NO - an OEM or full retail version? Full Retail - What is the age of system (hardware)?1.5 Year - What is the age of OS installation (have you re-installed the OS?)
View 9 Replies View RelatedAre there any benefits of upgrading to 2008 if your only usage is streaming movies to a web server. Any pros / cons?
View 3 Replies View RelatedThere is a Windows 7 machine and a Windows Server 2008 R2 machine in the same network. The Windows Search service is running on Server 2008 R2 and on Windows 7, therefore their music folders are indexed and added to the Music library. On Windows 7, I can search an artist in the start menu search and songs come up corresponding to the artist I searched for. However in Server 2008 R2 when I search an artist no results show unless that artist is in the file name of the song.Does anyone know what Windows 7 Search Service is doing that Server 2008 R2 is not? Perhaps something else is missing in Server 2008? Ironically, if Windows 7 was sharing its indexed music folder and Server 2008 R2 added the shared folder to its music library, it will find artists I search for in Server 2008 R2.
View 1 Replies View RelatedI want to reproduce an issue in IE8 in Windows Server 2008 R2 but the security settings of IE8 in the server is restrciting me to do so. The same issue is working fine in IE8 in Windows7
Is there a way out where I can change my IE security settings in Server 2008 R2 to behave same as IE8 in Windows7 so that I can reproduce my issue in Server 2008 R2 machine?
Has anyone messed with this yet. I keep getting an error while trying to set up the homegroup in the beta of this.
View 8 Replies View Relatedis there a specific version of Dynamics CRM I need to use with the OS Windows Server 2008?
View 4 Replies View Relatedhow to club (combine) windows 7 with windows server 2008 in single dvd?
View 1 Replies View RelatedI just upgraded my fileserver to 2008 R2 (clean install) and also upgraded my home PC to Windows 7 (also a clean install). Both are connected together using a linksys 8-port gigabit switch and each machine has 2 NICs which are bridged. The server has a static IP and the workstation currently has a static IP as well (although I've had it set for DHCP and the problem still occurs). Network Discovery is enabled on both and they are both in the same workgroup.
Now with that being said, here's the issue.....
Periodically, the workstation no longer can "see" the server if I try to browse the network. However I can still ping the server by IP as well as name, browse fileshares and even RDP into it. The only thing that is affected is if I'm using a program on my PC and need to access files that are on a network share, then the server isn't listed under network to allow me to browse to the share.
When this happens, I can usually reboot the server and then it will show up, but there seems to be no set pattern as to when it will disappear. If both machines are left on and not rebooted, the server sometimes will just show up under Network for awhile and then disappear again. One final note, on the server, the workstation does show up when browsing the network.
I'm running a 2003 and 2008 server the 2003 is the primary DC. Most of our PC's are XP and were testing 2 windows 7 machines.
The desktops and some shared drives were stored on a nas box but it was unstable so I shifted the desktops and some public shares to a server on one of the DC's. I redirected the shares using netlogon scripts and they took fine on all computers XP and Windows 7, the desktops were redirected using Group policy, all the XP machines took the redirection, a few needed the users to be reset though. The issue I'm having is with the 2 windows 7 PC's, they have taken the shares but not the desktops. The desktops were working before. I have tried deleting the users and login in again, I have also tried to remove the regedit policies but no success. I have even taken the PC off the domain and put it back on with no success. The same users log in fine on the XP PC's and get the desktop.
how to get driver for hp laser jet p4014 installed in server 2008 operating system
View 1 Replies View RelatedTrust relationship between windows 7 workstation and primary domain failed fix
View 1 Replies View RelatedI have Windows 7 Home Premium 32bit on my Laptop. I heard about installing Win 2008 Server(Not Windows Server 2008 R2 bcoz its 64bit and my Windows 7 is 32bit)on vhd in Windows 7.My first question is, can I install Win server 2008 on vhd in Windows 7 HP 32bit. or I need other versions of Windows 7 like professional or Ultimate. I tried installing Win Svr 2008 on vhd in Windows 7 Hp 32bit but did not work, this is what i did.Created a new fixed size/extnedable vhd in win 7, initialized and attached the vhd. Then put win server 2008 dvd and ran setup inside Windows 7, it asked me where to istall. I selected the newly created and formatted vhd drive(F). But it says load vhd HBA driver, i tired to find the driver online, in Windows 7 and win svr 2008 cd but no joy. I dont know wether, win svr 2008 can be installed on a vhd in Windows 7 Hp. I read online how to isntall win svr 2008 r2 on Windows 7 ulitimate, by pressing SHIFT+F10 at install time and then doing something in diskpart and then doing dual boot with Windows 7.i need to updgrae my win 7 to professional or ultimate to accomplish this job or there is way to do with Windows 7 HP. as vhd is just virtual, can any windows version be istalled on vhd.My main thing i need is having Windows 7 as main OS and dual boot with win svr 2008 which is on vhd.
View 3 Replies View RelatedI run a Windows Server 2008 R2 machine that amongst other things, acts as a media store/server. I recently got a Windows Phone 7 handset that can only synchronise content via Zune (ridiculous, I know), but Zune refuses to istall on Server 2008 R2, saying it can only be installed on XP and Windows 7.I have installed most of the Win 7 components missing from Server 2008 R2 so I'm not worried about compatibility, I just want to know, how can I force install an application to an OS that it is not 'allowed' to be installed on.If I can't get Zune onto the Server, I'm effectively barred from transfering music and video to my phone.
View 1 Replies View RelatedI have a windows 7 home premium laptop (64bit) and wanted to install SQL server 2008 R2 and Visual studio 2010 enterprise, Sharepoint 2010 enterprise editions using some virtual server or virtual pc. As far I know, we cannt directly install the so mentioned in windows 7 home edition. Is is possible to install these softwares on a virtual server? if so, what type of virtual software and version I need to install on my laptop? is there any way to install these 3 softwares on my laptop?
View 2 Replies View Related
