Partition Setup On HDD Storage Drive?
Jun 16, 2011
i just finished partitioning a hdd for the first time. It will be my storage drive (former boot Win7) drive complimenting a Corsair 115GB boot ssd. This is my first build?
f: 500GB for music, movie, pics and docs.
g: 230GB for installed programs and relocated windows folders. (Windows page files and user's folders)
h: the balance is unallocated at this time. Reserved for maybe umbutu/xp,etc.
1. Would it be better to install programs on f:, if so should I shrink it ?
2. Do you think the size of each is adequate?
3. Slould I install the Gpu drivers to the SSD?
4. Is is bad to keep changing and deleting volumes?
5. Should I partition the SSD boot in 2, one for OS 1 for games.
View 7 Replies
ADVERTISEMENT
Oct 11, 2011
I recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
View 2 Replies
View Related
Nov 11, 2010
The motherboard died on my 3-year-old Compaq, so I just ordered a new computer that comes preloaded with Win7Home Prem x64. It was from Dell Outlet so I couldn't choose the OS. I've been using MCE (XP pro 32-bit) for several years and love it.I'm worried about program and hardware compatibility with Windows 7 x64. I don't use very graphics-heavy apps like CADD, Photoshop, etc. I only plan to do a little video editing with my .avi clips. I also have an older version of Replay AV that I use to record live streaming radio. I don't want to buy a new scanner (Canoscan LiDE 20 - no x64 drivers!) so here are my options:
A-Partition the new 1TB drive for dual boot setup with Windows 7 Home x64 / WinXP Pro (32-bit). I would buy the XP Pro OEM Branded DVD.
B-Install my old 200GB SATA Seagate Barracuda 7200 as a second drive and run XP programs and scanner from that.
C-Buy Win 7 Pro 32-bit OEM Branded discs, remove Windows 7 home x64, and do a complete new install with the new discs, and hope that my XP programs work with XP Mode. (new i5 processor supports virtualization)
View 9 Replies
View Related
Feb 25, 2012
I had it installed previously on my computer, but it was in Program Files x86, so I uninstalled it and tried to reinstall, but am greeted by a blank install box that I cannot read. The only visible option is the OK button which cancels the install. [code] I am running Win 7 64 bit on a P6TD Deluxe board with my main drive a CORSAIR CMFSSD-128GBG2D.
View 1 Replies
View Related
Nov 22, 2011
I have an OCZ Vertex 3 SSD and 2 WD caviar blue HDDs. I have them installed on an ASUS Maximus IV Gene-Z MB. I have Win 7 Home Installed on the SSD and would like to set up a RAID 1 array with the HDDs for my data storage (music, pictures, etc.). From what I understand I must do a hardware RAID setup since Win 7 Home does not support the software RAID array. The only information I could find is how to install windows on the array and not use it as a non-bootable array for data storage.
View 5 Replies
View Related
Jan 13, 2013
I want to deny all access to removable storage for standard users at our office on one computer. I've been able to deny that access in the user configuration branch of GPedit. However; it restricts all users, even admin, when I enable that setting. how to I get it to differentiate between users? Of course I want admin to have access and standard users not to have access.
View 2 Replies
View Related
Aug 7, 2011
I used to have three partitions: Windows 7, Fedora 12 and a NTFS-Storage-Partition Now I had to reinstall Windows 7, it doesn't see any files on the storage partition; Windows shows the whole rest of the disk including the linux partition as one drive with 7gb of 80gb free, I can also open it but then there is nothing in it... Linux is still working and everything on the storage partition is still there and accessible in linux. do i have to tell windows the partitions or does it have to do a scan or something?
View 8 Replies
View Related
Dec 28, 2011
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
View 9 Replies
View Related
Jan 21, 2013
The title might be a bit weird, but i wasn't sure how to phrase it. I'll try and describe our problem:Basically what we want to do is to use the windows 7 search function, without knowing what letter our USB device has been given (i.e. D:, F: etc). Say I've named my storage device "Hello", now i'd like to search for "Hello" and the content should be popping up (like when i write D: and i see all the content in D: without going there manually). Is this possible, or are we simply wasting our time?
View 3 Replies
View Related
Jan 15, 2013
Previously my machine was dual-booting Windows 7 and Ubuntu. It worked fine with no problems until I decided that I didn't use nor want Ubuntu on my machine. Disk space was getting low for my primary partition and I decided it was time to let Ubuntu go. Anyhow long story short I cleared the two partitions that Ubuntu was using through the 'disk management' tool in windows. I didn't think at the time that GRUB would be stored within these partitions and that lead to the problem of being unable to boot anything.
I made and used a repair disc via another machine and then restored the bootsector code with it. That fixed the problem of being unable to boot. Now my problem is that I'm left with around 3-4 GB of wasted space in a partition. I was wondering if this 3-4 GB could be added to my primary storage partition? I've looked everywhere in the disk manager but I can't find anything there. I'm unsure as to if there is some 3rd party software available that could fix this? That 70GB partition shall remain undisclosed.
View 2 Replies
View Related
Jun 8, 2011
A friend has asked me to install Widows 7 on a friends laptop which has XP. The laptop doesn't have a DVD drive (no drive at all) so I've had to stick the installer on a USB stick from disc using a program.The USB boots up fine on the laptop, just like a disc. I formatted 2 partitions (same drive) and tried to install windows 7 but I get this error:"setup was unable to create a new system partition or locate an existing partition"So now, I have someone else's laptop with no OS. The owner is a 70 year old computer illiterate man.i'm planning on trying to install Vista instead and if successful, upgrade to 7. I would have upgraded in the 1st place, but P can't be directly upgraded to 7.
View 6 Replies
View Related
Sep 30, 2012
I have a 1T SATA system drive and a 1T SATA working drive. I installed a 3T SATA storage drive, and now my system won't boot from the C:. I have to go into the BIOS and boot from there, or use a boot disk. How do I get the system to boot from C: again?
View 3 Replies
View Related
Jan 21, 2009
I've successfully installed several instances of Windows 7 Beta 1 on several virtual machines. However, I am being stymied when attempting to perfrom a "native" install into one of my hard disk partitions in a multiboot configuration. I keep getting the following error message during setup:
"Setup was unable to create a new system partition or locate an existing system partition".
I have 2 internal hard disks. The first is a SCSI drive housing an instance of XP. It is the "system disk". The second is an IDE drive housing 4 primary partitions. The first holds NTFS data, the second an instance of XP MCE, the third contains VISTA SP1, the forth is the desired destination partition for Windows 7.
When I boot the Windows 7 setup DVD and get to the point of selecting the target partition I get the above error message.
Things I've tried:
1. Formatted the target partition as a Primary (via XP) - fails with above error msg
2. Formatted the target partition as Logical (via Vista) -- fails with above error msg
3. Left the area unformatted and let setup do the formatting - fails with above error msg
4. Installed a test version of Vista in the target partition first and
then tried to run a Windows 7 "Upgrade" from within that copy
of Vista - fails due to a weird bug requesting install of a disk driver
that device manager shows is already happily working.
I've been all over the web trying to find a solution. Many people have experienced this error message when installing Windows 7 in a multiboot situation with multiple drives but I have not found any viable circumventions. One person claimed that pulling the power cord on all hard disks other than the one containing the destination partition worked but I cannot do that since my SCSI is the "system disk" and houses the BCD and Bootmgr required by the VISTA (and Windows 7) partitions on my IDE drive.
This is probably a bug since Vista installs very nicely into the same partition with no problems. Hopefully it will be fixed by the RTM release. However, I would really like to circumvent the bug so I can use Windows 7 natively in the interim.
View 6 Replies
View Related
Mar 4, 2010
I have a new notebook which is an r519. I have no idea how to split the drives and which percentage should be which. I've been sitting here for ages moving the slider then moving it back. The total harddisk capacity is 232.88gb. How should I split this between C and D drives.
View 4 Replies
View Related
Apr 27, 2012
I have got a 60gb SDD from which I boot my OS and a 1tb HDD which acts as my storage drive. Most things I can direct to the HDD, but occasionally I find that despite directing a program to install on my HDD (E: drive) its will install on BOTH the HDD AND the SSD (C: drive). For example: I created a directory on the HDD into which I installed the game AION. I then checked my SSD and saw that it was almost full and that the game had not only stored on the HDD but also the SSD.I would like to avoid this as my gbs are precious few (I have already optimized my SSD to get rid of un-needed clutter, etc.). I would like to understand the behaviour of these programs and also get your opinion on if its safe for me just to DELETE the AION folder from my c: drive (without having to go through the whole DL process again).
View 5 Replies
View Related
Jun 7, 2012
Recently my SSD failed so I tried installing windows 7 from DVD on my HDD but I always get an error message: "Setup was unable to create a new system partition or locate an existing system partition."I've tried everything I could find here: I gave boot priority to the HDD, I unplugged every other device but nothing seems to work.
View 4 Replies
View Related
May 5, 2009
I'm getting this error when trying to install windows 7 rc x64:
"Setup couldn't create new system partition"
Then it asks me to check the setup log, but I don't know how.
Trying to install onto the 2nd partition of a 160 gb drive, split in half. It's disk 0, the first partition is active primary and has XP. The second partition is formatted ntfs primary and when I select it in windows setup, that's when I get the error message. I let windows 7 delete it and create a new partition and formatted it, but when I select it to install windows onto, it give me the above message.
It's a SATA drive running in native IDE mode on an AMD790GX board with a Phenom II X4 940 and 4 GB RAM.
It doesn't seem like it would be a drivers issues, since Windows sees the drive and both partitions, allows me to delete, create and format partitions, just won't let me install onto it. Any ideas?
View 5 Replies
View Related
Jul 30, 2012
I am unable to install windows 7 as , when I start the install and click on install it shows that setup was unable to create a new partition or locate an existing system partition.I have 2 hard disks , one of size 75 gb & other of 320 Gb..Previously , OS was installed on 320 gb , but i have formatted that drive before installing windows 7...
now my 75 gb hard disk is empty & one drive of 320 gb is also empty..It shows that 320 gb hdd ia on disk 0 & 75 gb on disk 1.I want to install Os in any of the above mentioned HDD.It shows that-> 1. all drives of 320 gb HDD as Logical & 75 gb HDD drives as Primary..
View 9 Replies
View Related
Dec 6, 2012
Is giving the following error when trying to install windows 7 in HD:
"setup was unable to create a new system partition or locate an existing system partition"
I've tried to do some procedures, but also can not create partition, do not know what else to do.
View 3 Replies
View Related
Jan 27, 2012
I built a new pc and i want to put windows 7 pro on it. When i try to install i got the message "setup unable to create a new system partition or locate an existing one". How do I fix this?
View 9 Replies
View Related
Aug 4, 2010
This is a fresh Windows 7 install on a 500GB HDD (previously used under XP) In the BIOS the Storage is configured as: Raid. Obviously I have the right raid ICH10R drivers from Asus (they are on a USB drive) Installation starts, Windows sees the disk, I specify the drivers, BUT when I click Next, I get: Setup was unable to create a new system partition. I can delete the partition, create a new one, format it, BUT when I click Next, I get: Setup was unable to create a new system partition. I used Gparted to delete the partition, and tried again - I used Seagate tools to zero the disk (sort of low level format) - If I try to install on a brand new 1TB HDD following the same steps, it installs fine... Both drives are Sata II and I used the same Sata port (only one disk at a time)
View 2 Replies
View Related
Aug 29, 2009
Clean install of windows 7 on 2 160gb sata HDD's set up for a raid 0
when i select a partition to install the OS onto it gives me the error
"Setup was unable to create a new system partition or locate an existing system partition. see the Setup log files for more information."
any suggestions?
View 5 Replies
View Related
Jul 6, 2012
I have a Dell Inspiron laptop that got a virus on it. I tried to fix the virus but was just not able to and every time I turned the computer on it would get an error message and ask if I wanted to start windows normally, once in a while I would get a BSOD and it would reset itself. I don't remember what the error messages were because I kinda ignored the problem for a couple months and finally got around to saving what I needed and trying to do a reset. Everything went fine when I went into Dells Datasafe Restore. After it wiped the drive and re-installed I got past the Dell screen at startup and on to the windows screen then suddenly got a flash of a BSOD then the computer restarted. I went through the startup repair and got the message Failure while setup is in progress. I've been searching for a solution for a few hours now and I haven't found one. I don't have a recovery disk (I was just trying to use the partition) and I don't have a windows 7 cd. Where do I go from here?
View 5 Replies
View Related
Sep 9, 2012
while installing windows 7 from the installation DVD, everything works fine till the screen where it asks me to select the partition on which i would like to install Windows. When I select Partition 4 and click Next it gives me an error saying "Setup was unable to create a new system partition or locate an existing system partition. See the setup log files for more information". I have only one HDD and no external USB's or drives attached to my CPU.
View 5 Replies
View Related
Dec 24, 2012
Yesterday i want to install windows 7 on my laptop but when i format Local disk C and click next it says setup was unable to create a new system partition.I boot through Pen Drive. I dont have a dvd rw(not working) and i have Data on other drives[/COLOR]...without wiping data and with wiping data.
View 9 Replies
View Related
Oct 27, 2012
So i'm trying to do a clean install on windows 7, i've tried to format and then do the install but it still says setup was unable to create a new system partition
View 14 Replies
View Related
Jan 22, 2013
How to reduce D Drive and increase C Drive
View 2 Replies
View Related
May 4, 2009
When I try and install Windows 7 64-bit on my hard drives I get the fallowing error.
Setup was unable to create a new system partition or locate an existing system partition. See the Setup log files for more information.
Its doing this with vista now.
View 9 Replies
View Related
Mar 27, 2011
After 8 long years I've finally upgraded my wheezy old pc, and now am drooling to play with this beastly new machine I've just assembled. My system specs should be in my sig below.But after 12 long hours of trying to install windows 7 pro, I'm more kinds of frustrated than there are words for.As in the topic title, I'm up against the "setup cannot find or create a system partition" error. My machine has a single 2 TB Hitachi Sata 3 hard drive, so there is no raid to muck things up, which seems to have been the primary cause of everyone elses troubles with this error. Using my old rig, I partitioned the new drive and transferred all the data from the old drives, leaving the first 75 GB partition empty and waiting for windows 7.
Then "the troubles" began. Research ensued.First thing I tried was to load updated sata 3 drivers from the mobo install disk. No help.Then I tried downloading the latest drivers from Asus and loading them from a flash drive during installation. No dice.Then I tried changing bios settings from Sata to IDE. No dice.Tried all of the above again with minor tweaks. Using the setup tools, I deleted that first partition and tried to make it again but setup gives me the title error.Well, of course I need that partition back so after some more research, I downloaded gparted, booted it up, but the video output is messed up and impossible to read.Then I slept for 6 hours. I woke up, tenacious and desperate, and figured I'd try diskpart (well above my paygrade) to make the first partition active and/or primary. Diskpart won't allow it? I disassembled my new system, plonked the old system back into the case, booted up into winxp off the old hard drive and with Easus partition manager and tried the same thing as with diskpart, but with the same results. No dice.Then, clearly somewhat crazy at this point, I put the new machine back in the case and tried ALL OF THE ABOVE AGAIN. No dice.Upon boot, POST sees the hard drive, but its not detected in bios. I don't know whether this is a hard drive problem, a mobo problem, a configuration problem, or completely normal for my gear. In any case, windows setup lists all the partitions.
View 5 Replies
View Related
May 9, 2011
I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.
View 1 Replies
View Related
Feb 18, 2013
I'm obviously brand new to the forums so I hope this is the right place for this. I should start with my type of drive; I have a 120gb Cherryville SSD from Intel serving as my C: Drive. Just the other night I had approximately 43GB left in my C: Drive (note this is incredibly low as well, but I was content). Last night I checked again and saw that I was down to 25! I performed a disk defrag and that actually decreased my storage to 23! I am absolutely puzzled as to the cause of this.
The only thing I have done between the time that I had over 40 and last night was update my visual BIOS (having nothing to do with my C: Drive at all) and download a simple XML update for Microsoft Expressions (which was measured in kilobytes). Granted I have done my fair share of updating .net framework and various other updates, but all of my major programs are on my hard drive, not my SSD. To put this into visual perspective, I'd like to share a photo showing around 25GB of space taken that is absolutely nowhere to be found, I find it hard to believe that Windows and a few programs can take up nearly 90GB of storage.
View 9 Replies
View Related
