I used to have three partitions: Windows 7, Fedora 12 and a NTFS-Storage-Partition Now I had to reinstall Windows 7, it doesn't see any files on the storage partition; Windows shows the whole rest of the disk including the linux partition as one drive with 7gb of 80gb free, I can also open it but then there is nothing in it... Linux is still working and everything on the storage partition is still there and accessible in linux. do i have to tell windows the partitions or does it have to do a scan or something?
i just finished partitioning a hdd for the first time. It will be my storage drive (former boot Win7) drive complimenting a Corsair 115GB boot ssd. This is my first build?
f: 500GB for music, movie, pics and docs.
g: 230GB for installed programs and relocated windows folders. (Windows page files and user's folders)
h: the balance is unallocated at this time. Reserved for maybe umbutu/xp,etc.
1. Would it be better to install programs on f:, if so should I shrink it ?
2. Do you think the size of each is adequate?
3. Slould I install the Gpu drivers to the SSD?
4. Is is bad to keep changing and deleting volumes?
5. Should I partition the SSD boot in 2, one for OS 1 for games.
The title might be a bit weird, but i wasn't sure how to phrase it. I'll try and describe our problem:Basically what we want to do is to use the windows 7 search function, without knowing what letter our USB device has been given (i.e. D:, F: etc). Say I've named my storage device "Hello", now i'd like to search for "Hello" and the content should be popping up (like when i write D: and i see all the content in D: without going there manually). Is this possible, or are we simply wasting our time?
Previously my machine was dual-booting Windows 7 and Ubuntu. It worked fine with no problems until I decided that I didn't use nor want Ubuntu on my machine. Disk space was getting low for my primary partition and I decided it was time to let Ubuntu go. Anyhow long story short I cleared the two partitions that Ubuntu was using through the 'disk management' tool in windows. I didn't think at the time that GRUB would be stored within these partitions and that lead to the problem of being unable to boot anything.
I made and used a repair disc via another machine and then restored the bootsector code with it. That fixed the problem of being unable to boot. Now my problem is that I'm left with around 3-4 GB of wasted space in a partition. I was wondering if this 3-4 GB could be added to my primary storage partition? I've looked everywhere in the disk manager but I can't find anything there. I'm unsure as to if there is some 3rd party software available that could fix this? That 70GB partition shall remain undisclosed.
I recently purchased a new motherboard. After reinstalling windows, I noticed that my primary partition is also on my Storage Drive. Is there a way to change it back to only the SSD?
Keyboard and mouse drivers unaffected.USB Mass storage device properties messagewith driver check on:"Windows cannot verify the digital signature for the drivers required for this device."with driver check off:Tells me drivers are corrupt or missing.Search show diver where it should be:C:\Windows\System32\drivers\usbstor.sys (also usbfilter.sys).Used the HP Recovery Manager to restore factory setting for USBStor.sys, it indicates it is successful but no changeon reboot, still cannot use flash drives, SD cards, external HDs. Units work find on my laptop.Called HP 4 times, after extensive troubleshooting each time, following their instructions, go to hp.com/go/instant, get screen saying request has been received. Each time tech tells me he cannot find my request.After a while, read 2 hours, told they need to talk to supervisor, will call me back, KISS OF DEATH, never hear from them.
how to handle USB removable media inside camera.With camera there is no "Safely remove hardware and eject media" option.When Photo camera is connected, a new camera device is installed and GUI window is opened with option to browse or copy photos. But there is no removable storage devise eject button on notification area. The USB removable Storage devise is also present on File Manager Computer left panel but again, there is no mouse right button eject option as normally with removable storage devices. I have checked in on several computers. How to understand. I don't believe that it's camera specific but Camera is Canon S95.
I'm having a hell of a time trying to connect to my shared folders on my Win 7 RC machine from my XP machine. I have my shared folder permissions set to 'full control' for 'everyone'.On my XP machine I click to open my win 7 machine from the workgroup and I get the username/password screen. The username is already filled in like this: WIN7PCjohn. I type my win 7 password for john user account and I get an error that says: \win7pc not accesible. You might not have permission to use this network resource ... multiple connections to a server by same user ... etc.
I have 3 computers on a LAN. Two run XP (pro) one runs Windows 7 all current.
They are all in the workgroup MSHOME. Homegroup on Windows 7 is unassigned. From Win 7 I can access the XP boxes. From XP I cannot connect to the Windows 7 box with the message ... "logon failure: the user has not been granted the requested logon type at this computer"
When I installed Windows 7 on to my new laptop I think I did it on to the wrong partition as there is still a 30GB freedos one.Can I merge it with the partition Windows 7 is installed onto as it is getting full?I don't want to have to reinstall Windows again.
I'm building a new computer. Can I partition the hard disk, copy my laptop HD to boot from one partition and run a new windows 7 pro os from the second partition?
We have just installed Windows 7 on one of our computers last week and we have 2 other computers that have an XP operating system The XP computers need access to shared folders on the Windows 7 computer and this was working fine yesterday However today it has suddenly stopped. I am getting errors about cannot access this drive etc I have checked up on security settings etc [URL]
I have windows 7, I am trying to configure the WIFI, I have wifi connection which having WEP with shared key authentication, that option I not found in windows 7. I have manually create a new profile and choose shared security option and WEP and I enter the my security key but I was not able to connect with wifi.
I explain how frustrating this has been...Ok, so just a very brief back story, my job has a shared Toshiba file, where all scanned documents, and received faxes can be viewed as PDFs. Everything was fine until my computer (Windows XP) crashed, and I rebooted it with Windows 7. Everything else has been fine, but resetting up this file has been a nightmare. After about 15 calls, someone was finally able to create a folder that worked yesterday, however today it is back to the drawing board. , the folder that was set up was NOT the same one that my co-workers use, which is fine as long as I can access the data, but for whatever reason it is not working...I don't know if it has to do with the network path, the file name, or what.
Now, I am definitely hooked up to the network, and I definitely have network discovery on. Password protect is not on so that anyone can view the shared documents. If it makes any difference, the printer/copier/fax machine/scanner is a Toshiba E-Studio202L machine. When I click homegroup/sharing options, everything is checked off...I really do not know what the problem is, as the documents are just not getting forwarded to my folder (or any folder).
I have a problem on my tiny home network. I have 1 desktop with windows 2000 and laptop with windows 7 home. I shared folders on windows 2000 and removed all passwords. it means when i boot 2000 system i am not asked for any credentials. But when i tried to see those folders from windows 7 i am always asked for login and password. I also have Andriod tablet and it access those folders (on win 2000) without problem. Also i cannot access shared folders on my win 7 laptop from this tablet (it also is asking for login and password on win 7 but win 7 does not have it).
XP SP3 is used. The Simple File Sharing is not enable.Ping from Windows 7 to XP goes through.The same log-on user name and password are used for XP and Windows 7.XP machine is visible from Windows 7.Error message is "Unknown user name or bad password. The same message when attempting to access from another Windows 7.Initially it was working but after an hour or so, it quits. I rebooted the router, XP machine and Windows 7 machine but the situation remains unchanged. There is no problem networking between the two W7s.
I have two networked computers belonging to the same workgroup: one with Windows 7 Ultimate SP1 64-bit and the other with Windows XP Pro SP3.On the XP computer, I shared a folder allowing only the access to the Administrators group.Now, from Windows 7, I can see this shared folder, but when I try to use it, the no authorization message is displayed.Why the Login window is not displayed?
I have a new HP8710W laptop that originally had Windows XP Professional installed from the factory. I just received my Windows 7 Professional 32 bit upgrade kit and have installed it on my computer
I also have a Desktop PC that is running Windows XP Professional.
Prior to installing Windows 7 on my laptop I was able to see the shared folders on HP8710W laptop while running the Windows XP Professional operating system. I would like to be able to access the shared files on my Desktop computer that is running Windows XP Professional with the HP8710W laptop that is running Windows 7 Professional 32 bit. I am a novice when it comes to networks and would appreciate any suggestions on what to do to get this to work.
I anticipate installing Windows 7 on my desktop in the near future but have not done the conversion as of this date.
I would appreciate some step by step instructions if they are available and not too much trouble to pass on to me.
I am running a TRENDNET TEW-432BRP wireless router H/W:vDl.OR
I have 4 worstations in the same HomeGroup I can access the files of workstation 1 from the two workstations but the 3th one in the 3th one the the shared folder appears but when I try to aceess the files inside I get an error can't acess contact administrator the pasword protection is disabled in the workstation 1 and I can access the files from the other two workstations so I have no clue what is going on I have disabled the firewall and Norton IS on both workstations but still can't access the content of the sahred folder
so i'm having an issue trying to connect to the shared printer on one of my windows 7 x64 machines.i've tried setting the network on windows 7 to "work network" instead of "home network" thinking that the workgroup being the same on all systems will do the trick but it doesn't.
I just bought an Alienware laptop with windows 7 home premium 64bit. As soon as I got it, I connected it to my network and attempted to access my shared files, but it wouldn't detect any of my computers on the network. I have an iMac with Snow Leopard, sharing a few hard drives, & an old Qosmio with Windows XP Media Center Edition, sharing one hard drive. The iMac and Qosmio both detect each other with no issues, sharing files has never been better. I don't remember doing anything special, other than sharing files, on Windows XP, for the files to be present on other devices. On Snow Leopard, I added the XP account, & the Windows 7 account. I enabled sharing files, specifically, AFP & SMB.
And then checked both XP & Windows 7 accounts to assure accessibility. The Group (Workgroup) is the same across all 3 devices. XP detects my iMac & can access the files, & the iMac can detect XP & access the files. Now, my iMac can sometimes detects the Alienware/Windows 7, but since I'm not sharing any files/folders on it, it can't access it. My main problem(s): Windows 7 never detected XP. Once, Windows 7 detected & accessed all files on the iMac, but after shutdown/restart (Possibly updating Windows 7 to Service Pack 1), Windows 7 does not detect or show any computer on the network folder other than itself.
If I turn on "PS3 Media Server" on the iMac, Windows 7 detects it, but when I open it, it takes me to Windows Media Player, which then tells me that the PS3 Media server is empty. On Windows 7, Advanced Sharing Settings, "Home or Work" network settings (I'm have my network set to "Home Network"), Network Discover is ON. File & f=printer sharing is ON. Public Folder Sharing is On. Media Streaming is On. File sharing connection is set to 40- or 56-bit encryption. Password protected sharing is Off. HomeGroup connections is set to "Use user accounts and passwords to connect to other computers". I have Kaspersky Internet Security 2011, if that matters. XP has it as well.
I have two computers running windows 7 in a router LAN. One of the computers have several external drives connected to it. I have shared the drives successfully over the network and the settings remain saved so that I don't have to reshare the drives everytime I log in.However, three of the drives remain unshared after a restart or reboot. Why is that? How can I keep the shared settings for these drives also?
I'm having problems with two diferentes Windows 7 Professional computers, I'm opening a shared folder on a WinXP Computer but I don't see any new files, I can see them if I disconnect and reconnect the shared folder. All the computer are logged on windows 2003 R2 server domain.
I'm using Windows 7 Home Premium 64bit and it's on a network with a Techgear MB902 PVR. I used to be able to watch movies in my Windows 7 shared folders on my TV via the MB902 but after I bought a new PC and installed Windows 7 I've had problems accessing the Windows 7 shared folders.
When I connect to my PC it asks for a login and password, and none of my pc or network passwords work. Strangely enough, when I restart Windows 7 the problem goes away and I can login successfully without a password, but then later the same day or the next day the login/password problem has returned.
I've trawled the internet looking for solutions, and tried all of the plausible looking ones, editing the registry, unsharing and then resharing. They all seem to work but then I realise that it's the reboot that works and not the fixes because the problem returns.
The MB902 has a hard drive and I can access the files on that from my PC with no issues it's just going the other way that I have problems.
I have two computeres set up in an offline LAN with a 4 port switch connected to a router. One is a server with 4 shared 1TB drives. The other is just a works station. Both computers are running windows 7 ultimate x64. My problem is that 1 drive which I've label as Z: keeps disconnecting in the workstation. When I check the server I noticed that the Z drive has been marked as un shared. So I re enable sharing and set the desired permission. Then I re map the drive on the workstation. A few days later and the same issue happens. Both computers are always left on and I've set the power options accordingly.
I'm trying to access a shared folder on my windows xp machine. i went to map network drive, use different credentials, and typed in the account name and password that i had given rights to on the other computer. but it just reprompted for different credentials.as a temporary fix i created a user on this computer with the exact same credentials as the ones i typed in, and it works for that user. so apparently the computer didnt understand what i typed in for 'use different credentials'?
I have 2 windows 7 computer on a wireless network in my house. Basically I want to be able to share the drives on both computers so that i can stream media between the computer and also devices in my home (xbox360). I went to set the drives to shared in the properties for the drives on both computers, however, whenever I try to connect to the other computer through the network section I got this pop up asking for a password, I tried login passwords and no go. So I went into the sharing options and turned off password protection and it seemed to let me through, and i can see the drive i named and setup, only now when I try clicking on the drive I shared it says (windows cannot access//Name of Folder). How do I get this to work?
I currently have a dual boot on my computer with Windows 7 and XP. Unfortunately as my computer is quite old my hard drive is not very big and with it being partitioned I am fast running out of disk space. So I tried to shrink the XP partition to allow me more disk space for Windows 7. Unfortunatley this would only let me shrink it by 83mb for some reason. I decided that since I barely use XP anymore that I would simply reformat the XP drive then try and merge them together. When I tried to format the partition it just gave the error "Windows was unable to complete the format". I then discovered in Disk Management that the Windows XP partition was the system partition which was causing the problem.
