Upgrade Xp To Win7 - Partition Not Recognized
Oct 27, 2009
I'm currently running Windows XP (SP3)and am trying to run the Windows 7 Home Premium upgrade. Each time the installation gets to the point of starting to erase the XP program files and load the Win 7 files and stops with a statement that it doesn't recognize the C partition where XP is installed. The PC has a single SATA HD with only a single partition. Is there some step that's left of the installation instructions that I could be missing?
View 6 Replies
ADVERTISEMENT
Nov 8, 2009
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
View 1 Replies
View Related
Oct 28, 2009
Is it possible to upgrade in place from Windows 7 32bit to Windows 7 64bit.
Is it better to do a clean new 64bit install?
View 2 Replies
View Related
May 8, 2009
I have a WD Passport 160GB portable HDD, which worked fine in XP on the same computer before I installed Windows 7.
As many other people experienced, the once the device is connected, it will show USB device not recognized. However, my mouse and keyboard, which are USB also, are working flawlessly.
Besides the Passport, I have a Maxtor External HDD which is not working also, I tried every single USB port on the computer and it just won't work. And this one is powered by a small power adapter, so it should not be anything related to USB power. On the other hand, the Maxtor HDD is visible from BIOS, just not in Windows 7.
My computer is single boot Windows 7 RC 64bit, clean install.
I'm using Q6600, Foxconn MARS P35 mobo, Seagate 7200.10 250GB HDD, PNY 8600GT, OCZ 2x2GB DDR2 800 ram. I don't think the hardware have any problem since in XP everything worked fine, and all the drivers are up to date according to the device manager in Windows 7.
Any advice?
View 9 Replies
View Related
Oct 28, 2009
I've created the ISO file and moved it to the 4g drive using the AWESOME guide found here. However, the BIOS doesn't seem to recognize that the device is present. I've done some research and found that some usb drives aren't compatible with the BIOS? I made usb storage the only available boot option and nothing showed up.
However when I look at the drive while in Vista through my computer->G: It shows up as a windows system. I've also seen somewhere about enabling "Legacy usb"? I didn't find anything like that. Should I just got buy another flash drive and try again?
View 6 Replies
View Related
Dec 9, 2009
hard drive registers in BIOS, but not in the windows 7 Ultimate 64 bit installation screen. Any questions I will answer RIGHT away. Oh dear God please help me. I took it in to a repair shop and I think I knew more than they did and left without any substantive help (but a $40 bill ). Do I need to format the HD? Would drivers help? All the websites say everything should be compatible - no problem - but nothing here.
WD Blue 640 GB (single HDD)
AMD Phenom ii
GA-MA785GM-US2H Gigabyte motherboard
OS: Windows 7 Ultimate 64 bit
View 4 Replies
View Related
Nov 13, 2009
I installed Win 7 RC on a new build and purchased Vista Home Premium 64bit OEM with upgrade to Win 7 Home premium. The Win 7 upgrade disc has arrived. I understand that Vista must be installed and activated for the upgrade to work. Attempts to install Vista with Win 7 RC running or booting from the Vista disc lead to error code 0x80070103, insufficient free space. My HDD has > 450 Gb free space in 2 partitions. Do I need to reformat the HDD in order to install Vista over Win 7?
View 9 Replies
View Related
Dec 6, 2012
I've purchased a used Dell Precision 490 'born' June 2006 and 'driven only on Sundays.' The seller upgraded it for me from XP to 7 before shipping. (The genuine Windows 7 DVD was sent along with it.) The CD-ROM (TSSTcorp CD-RW TS-H292C ATA Device) is not recognized.The DVD drive works fine. The seller says the CD drive worked fine before with XP. When the computer boots up and also when restarted, the CD drive is listed as E: under "Computer" and also in the Device Manager. It does respond to a right click on E: to open the tray. When any of several CDs are run, the 'doughnut' spins for 5-8 minutes resulting with "E: refers to a location that is unavailable..." Or using the Task Manager to exit causes a gray out with "Computer not Responding." Then E: is no longer listed under Computer or in the Device Manger. The CD tray will not open.
With the CD inside it takes 5-8 minutes for the computer to shut down or restart. The CD tray can only be opened when the computer is first (re)starting. Without the CD inside start up is within 60 seconds. Using the Device Manager to update, the response is 'The best driver for your device is already installed.' Following Windows 7 troubleshooting, I've also uninstalled and rebooted to reload the driver. Checked the cables disconnecting and reconnecting the CD drive and mother board. Checked the registry for upper and lower filters (none were listed so none needed to be removed) and followed the numerous other measures listed in a thread, November 2, 2010... missing upper/lower filters registry cd/DVD - Microsoft Community Still unrecognized as above
View 1 Replies
View Related
Sep 23, 2012
I've had my partitions over several drives set for many months. Suddenly on boot this morning, one of the partitions isn't recognized by Windows (7 64-bit). My partition software (EaseUS Partition Manager Pro) does "see" it and shows the correct division of used and unused space. This is an NTFS partition with 11.86 GB capacity and 2.50 GB used. The status is None and the type is logical.The error message box title is "Location is not available". The message is:H: is not accessible.The file or directory is corrupted and unreadable.I've had no activity in this partition for several days. The partitions on either side are fine (fingers crossed they stay that way!). They same the same characteristics (although obviously different capacities) as the missing partition.
View 1 Replies
View Related
Sep 12, 2010
Bought an Windows 7 home premium upgrade disc for my Vista home premium pc, duly went and downloaded the upgrade advisor program before opening the package and it told me that my computer was a-ok to run windows 7 and upgrade, so I opened the package and put the dvd in my laptop's drive.It makes a whirring noise, then sticks, if I click on the drive it tells me to insert a disc and ejects the windows 7 dvd.This is the first and only DVD that has ever behaved like this, all others work.
View 5 Replies
View Related
Oct 13, 2011
I previously had an 80gb IDE and 200GB IDE drive and a 1TB Hitachi SATA drive running XP. I decided to upgrade to Win7 and at the same time replace the old IDE drives with a WD Black 750GB Sata 3. I put all my data on the Hitachi 1TB, installed Win7 on the WD, it seems fine, but My Computer won't recognize the Hitachi with all my backed up data. Device Mgr sees it, BIOS sees it, the WD HDD support software sees it, but I can't access it. I removed the drive via Device Manager, rebooted and again it was correctly identified by Windows and installed, but still not visible in My Computer. What am I missing? I did use a SATA 3 cable on the Hitachi (its a Sata 2), but I thought that was ok to do.
View 2 Replies
View Related
Oct 13, 2011
I previously had an 80gb IDE and 200GB IDE drive and a 1TB Hitachi SATA drive running XP. I decided to upgrade to Win7 and at the same time replace the old IDE drives with a WD Black 750GB Sata 3. I put all my data on the Hitachi 1TB, installed Win7 on the WD, it seems fine, but My Computer won't recognize the Hitachi with all my backed up data. Device Mgr sees it, BIOS sees it, the WD HDD support software sees it, but I can't access it. I removed the drive via Device Manager, rebooted and again it was correctly identified by Windows and installed, but still not visible in My Computer. What am I missing? I did use a SATA 3 cable on the Hitachi (its a Sata 2), but I thought that was ok to do.
View 1 Replies
View Related
Sep 6, 2009
i read all the topics from here but i am unable to resize my win 7 partition .
i think the problem is that the free space is in the extended partition . how to get the free space from the extended partition without erase or format the other partition (D and E)
http://i31.tinypic.com/2cr3dx1.jpg
I try a lot of programs but no one works becouse the free space is inside the extended partition
View 9 Replies
View Related
Dec 24, 2009
I have windows 7 RC, windows vista, and linux mint running in a triple boot config. I don't really want to keep linux and was planning on installing the Retail version of Windows 7 once i buy it. However, while im booted in windows, i cannot see linux at all. I can only see the Windows 7 partition (C: ) and vista partition (D: ) under Computer.
But i can see it in Disk Management
The last two partitions are for linux.
So my question is, when i decide to install windows 7, will the windows 7 install disc see those linux partitions so i can delete them while installing Windows 7? You know the utility in the Windows 7 install disc that allows u to delete, format etc. partitions.
View 3 Replies
View Related
Mar 15, 2009
I have an older computer that is or was being used for Win XP Pro. I put a new hard drive that is partitioned with 25gb on the C drive with two other partitions of different sizes. I set the the hard drive as cable select (later tried as Master only)
Windows 7 in cable select saw all the partitions. When set to Master it only saw Partition 1 and the rest as unallocated which seems weird.
I have the boot order in Bios set as Floppy, CD Rom and then Hard Drive.
I have an external usb DVD reader for the install disc.
When i start the pc, then press to boot from CD, it sees the install disk and the install process starts. I get to the point to select where to install and I get this Notice:
"Windows can NOT be installed on to Disk 0 Partition 1"
I hit the more info button and get this notice:
"The computer hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the BIOS Menu."
It should boot to the hard drive the way I have it setup. At least it does for Win XP.
I was wondering if anyone has any suggestion as to how to get around this issue.
View 6 Replies
View Related
Nov 11, 2009
I have no idea what that partition is for, but why are people up in arms about it. Who cares?
View 5 Replies
View Related
Nov 25, 2009
I installed Win 7 on a partition on the same drive as XP.
1 - XP was on C: Win 7 installed to F:
2 - I have removed XP from C:.
3 - Repaired Win 7. Win 7 boots fine.
Now I want to move Win 7 to the beginning of the drive but unsure how - as Acronis doesn't allow me to clone to the same drive - even though its another partition.
Is there any way round this?
View 9 Replies
View Related
Jan 2, 2010
I am using Windows 7 Home Premium N and XP Home on a dual-boot system but I want to move my Windows 7 partition from one drive to another but am not sure how to do it. Currently XP is on partition C: and Windows 7 on partition O: and essentially, what I want to do is to move partition O: to my main drive where space is already available for this to be done.
I have seven drives on my system amounting to 6.5Tb (2Tb on external drives) and currently Windows 7 is on a partition on one of the internal 1Tb drives. However, I would like to free up the space being used and place Windows 7 in a separate 50Gb partition at the end of my main drive (500Gb). Since I pre-partitioned the current Windows 7 partition before installation, I do not have the 'hidden' partition I've read so much about.
I have an old DOS version of Ghost on a boot CD and can readily back up the current Windows 7 partition ready for recovering to the prepared partition on my main drive. Once transferred I then want to delete the current Windows 7 partition. However, I know there is more to it than this! I am quite happy to reletter the partition to drive O: since I have software installed on the Windows 7 partition which is referred to in the registry.
All this I'm fairly confident about doing - but it is operations involving the boot manager that I am completely unsure of. How does the system know where the boot info is located? What points it to the right partition/drive? Does it refer to the drive and/or partition? Is there anything else I just may have overlooked? Finally, should I perhaps just leave it where it is until I'm ready to do a reinstall on the appropriate partition?
A lot of questions I'm afraid but I would appreciate some help as I'm fairly new to the question of dual-boot systems and boot management.
PS I have been looking for info on this in all sorts of places but have not so far found the answers to my questions. Sorry for any inconvenience if the info I'm looking for is already on this, or another, site. It's just that I've not found the info so far and any help being pointed in the right direction would be appreciated.
View 9 Replies
View Related
May 13, 2009
I am running Windows 7 all great and haven't had any problems, I want to make Windows 7 my sole operating system and remove my XP partition. I managed to install Windows 7 on a separate partition with no problems but just wondering if it's all fine to go ahead and delete my XP partition and then resize my Windows 7 partition back up, this wouldn't create any problems?
Just a matter of backing up all the essentials first, just in case?
View 1 Replies
View Related
Oct 17, 2009
1st. Can I upgrade (clean install) from either XP or Vista 32 bit system to Windows 7 64?
2nd. If the answer to 1st is yes... If the Win 7 64 bit gives too much trouble, will I be able to reinstall and go with Win 7 32 bit.
I believe the future is going to be 64 but I've never used the 64 bit and really don't know what to expect or how smooth the transition will be. Any thoughts or advice???
View 3 Replies
View Related
Nov 25, 2009
I have a window xp pro can i upgrade to window 7 32 bit?
View 11 Replies
View Related
Sep 21, 2009
Is it possible to install Windows 7 on a GPT disk?
I created a RAID 0 array on my dual Xeon 5580 system and tried installing Windows 7 Ultimate 64-bit RTM. When I got to the "Where do you want to install Windows" part I used shift-F10 to open up a command window, then I used diskpart to create a GPT with the following partitions:
Disk 0 Part 1 - 102 MB EFI System
Disk 0 Part 2 - 128 MB MSR
Disk 0 Part 3 - 500 MB Primary
Disk 0 Part 4 - 7446 GB Primary
But there was a message "Windows cannot be installed to Disk 0 Partition 3 (show details)" - clicking on "show details" gave me "Windows cannot be installed to this disk. The selected disk is of the GPT partition style."
What gives? I thought Windows Vista and beyond supported GPT.
The problem with MBR is that you can't have a file system larger than 2 TB.
View 6 Replies
View Related
Sep 25, 2009
So heres my problem: I installed Win 7 on a drive a while back and earlier today I decided that I needed more hard drive space. I saw that I had 100gb of unallocated space on the drive, but it was behind my Windows 7 partition, making it impossible to resize that partition. So I defragged with Perfect Disk 10 which moves all the files to the back of the partition, cleaned up, disabled all the usual things, ran defragger again, and then booted into a live cd of GParted. I then proceeded to move my Windows 7 partition behind the unallocated space so I could extend the volume.
Unfortunately, something went wrong and now I get the error message "Disk boot failure, please instert system disk and hit enter." So I followed the directions and ran startup repair, tried manually creating the bootmgr, and ran all the tests, but it still doesn't work. Luckily for me, I was able to reinstall Windows 7 on the unallocated space so I can at least get to the files on my other drive, which I discovered are all perfectly fine. I'm hoping this will be a quick fix since it seems like all the files are ok. What should I do so that I can boot back into that partition?
Long story short, I tried moving the partition, and something went wrong, and now I can't boot into that drive. I installed another copy of Win 7 on another partition and all the files are ok. What do I need to do to the original partition to get it to boot again?
View 9 Replies
View Related
Nov 25, 2009
I am having a problem that seems more like a Win XP problem, but since its part of my migration to Windows 7 and many people these days may be trying the same.
As I said, I am in the progress of migrating to Windows 7. As a transient solution until I have transferred and re-installed everything under Windows 7 I want to have a dual boot capability, i.e. I bought me a larger HD, created two partitions on it, installed Windows 7 on the first partition, and then I used a disk-imager (Acronis Disk Director) to copy my entire old XP disk 1:1 to the second partition of the new HD. I then set things up so I can choose between the two partitions using the Windows 7 boot manager. After some fiddling the choosing and booting in principle works fine.
BUT, when I try to start WinXP, I have the very strange effect, that the system at first boots and starts WinXP up fine up to the point where it presents the login screen. When I then enter my name and password my credentials at first seem to be accepted, i.e. I get a "Loading your settings..." dialog but to my dismay only seconds later that dialog always turns into "Logging off..." (???!@#@$&!) at which point the system hangs for some long period. If I wait long enough (~5 minutes) it eventually returns to the login screen again. I also tried to login as Administator but that failed as well (the error message mumbled something about no domain server to verify my id which is complete nonsense, since my XP system was never part of any domain, so there is no server in the world that could verify anything here!).
Any idea what could cause this and why can't I not log into that copied/moved 1:1 Window XP installation? Any hints/suggestions/pointers would be highly welcome!
View 4 Replies
View Related
Dec 8, 2009
I have a small query about this whole partitioning business. I'm trying to set up a partition so I can dual-boot Windows 7 and Ubuntu.
My computer came with a Dell Recovery partition and an OEM partition as well as the main C: drive, which are all primaries. I've created a new logical drive, which I've called Z:, with the idea being to install the Linux OS in that chunk of the drive.
My first question: First up, I've formatted it as "exFAT" - is this the same as FAT32?
Next question: can I divide this 'Z' into smaller chunks with different formats, or do they all have to be the same format? I was hoping to be able to format a small bit of the drive into a Linux file-system so that both OSs can be kept entirely separate from each other, but leave the bulk of it as FAT so that I can see my files with both OSs. If this is not possible, what would be the best way to achieve the desired result?
View 1 Replies
View Related
Sep 15, 2009
Having obtained my new 80GB Intel X-25M SSD I will of course be using it as the Windows Partition in my new installation after I receive my release copy on 22nd October.
However, I was wondering on the best way to partition the remainder of my storage to maximise performance, and particularly where I place the swap file, applications and data.
The Maxtor was the original HD that came with the PC and is approaching 4 years old. I obviously don't want to use it for anything that affects performance so the obvious usage is as a backup volume. However, I'm not sure of the wisdom of this given it is the oldest drive!
So, my current plan is as follows:Boot & Windows Partition, including application installation: All 74.5GB of the available SSD Swap File: A seperate 10GB partition of the WD drive Data: The remainder of the WD Drive (Can you get Windows 7 to move the location of the User Folders such as 'Documents', 'Downloads' etc. to a partition other than the system drive? If so how?) Backup: The Maxtor Drive Even though I am getting a full version of Win 7 by virtue of the UK Pre-Order offer, I won't be maintaining my Vista install so no need for a partition for that (good riddance!).
It is important that the swap file is not on the SSD I understand to reduce the number of write cycles and maintain its lifespan.
Does this sound like a good plan to maximise performance? Certainly using the seperate swap file seems to work very well in my RC test installation.
View 7 Replies
View Related
Jan 22, 2010
Would anything happen to my other partition when i format win XP to win 7 in C: drive/partition?
Okay it goes like this, I have Win XP SP3 installed with two partitions, C: and E: (<----supposed to be D: ). I intend to install Win 7 Ultimate on my computer from XP SP3 and install it in C: where the current OS is at. My question is, will my E: partition prevail still? Will the reformatting touch E:?
The reason is because there is where i want to put my backups and later migrate it.
View 6 Replies
View Related
Dec 1, 2009
I'm trying to install Windows 7 Professional on a system with the 2nd hard drive partition - 100GB in size. I used Paragon Partition Manger to create the two partitions, formatting both as NTFS.
Windows XP isproperly installed on the first partition. When I try to install Windows 7 Pro on the second partition it extracts the files & installs fine right up to the point of rebooting, then gives me this error on rebooting:
File: windowssystem32winload.exe
Status: 0xc000000d
The selected entry could not be loaded because the application is missing or corrupt.
I've purchased four Win 7 Pro license keys from MS and already sucessfully loaded Windows 7 Pro on three computers with a single partition HDD, using the DVD (downloaded from digitalrivers) w/o any problems - so one would think the DVD itself is OK.
Any ideas why I can install Windows 7 Pro (using the same DVD) just fine on a single (simple) partition but get this error when trying to install on a seperate partition?
View 3 Replies
View Related
Jul 19, 2009
I recently bought a new laptop that is covered under the windows 7 upgrade program. Does anyone know if this can be installed on another PC instead? The other PC is Windows Vista Home Premium 32 bit.
View 9 Replies
View Related
Sep 12, 2009
Ok well i got a new Dell Studio 435 Tower in april or so i7 920, 6gb 1066 tri-channel, 1gb ATI 4870, 750GB WD Black Caviar... i was running x64 Vista Home Premium and it was smooth as butter... had a 5.9 WEI and was pretty happy with performance.
2 nights ago i saw that the Windows 7 RTM was available on MSDN so i snagged x64 Windows 7 Home Premium... upgraded in place fine but now its much slower than my x64 was!
It takes longer to both boot up and shut down, some programs freeze when opening or closing them... i re took the WEI and it went down to 5.5. For some reason all my other scores shot up to 7.5 except my Ram which fell to 5.5 and my HDD which fell to 5.9 ???
I started investigating and it now says that i have 6GB installed and 1.99GB usable. What? When i was using Vista it said nearly all of it was usable.
I went into my bios... updated it to the newest version along with the intel chipset... in bios it states that i have 2048 available out of 2048 installed??? I have combed my bios and don't see ANYTHING that will let me mess with ram period.
I did the whole start>run>msconfig>boot>max ram, but no matter what i do it always defaults back to 2048 when i reboot my machine and go back to it.
View 6 Replies
View Related
Jul 8, 2009
I have an old XP pro CD that I gave to my boyfriend for his new
computer. I tried to install it, and I don't know what happened,
it was bad - I guess over the years the CD got corrupted.
The serial number of course is good but there's no COA because
back when I bought it they weren't doing that yet.
So I installed windows 7 RC 1 on his new computer. I don't want to
talk him into buying the windows 7 upgrade if he can't upgrade.
I read somewhere that windows xp has to be installed on the HD
in order to do the upgrade, but at the same time you can do a
clean install. What?
So how am I going to get this upgrade? Do I have to get Microsoft
to send me a new CD? Because that's not bloody likely, is it?
I was thinking all I'd have to do would be to input the old XP
serial number.
View 7 Replies
View Related
