i read all the topics from here but i am unable to resize my win 7 partition .
i think the problem is that the free space is in the extended partition . how to get the free space from the extended partition without erase or format the other partition (D and E)
http://i31.tinypic.com/2cr3dx1.jpg
I try a lot of programs but no one works becouse the free space is inside the extended partition
I am running Windows 7 all great and haven't had any problems, I want to make Windows 7 my sole operating system and remove my XP partition. I managed to install Windows 7 on a separate partition with no problems but just wondering if it's all fine to go ahead and delete my XP partition and then resize my Windows 7 partition back up, this wouldn't create any problems?
Just a matter of backing up all the essentials first, just in case?
I have a dual boot XP/7 system with XP as the first partition, then 35GB of unallocated space, then the 7 partition (don't ask ;-)), then 130GB data partition .. anyway I want to extend the 7 partition back into the unallocated space.. how can I do this..
I'm NOT going to use Acronis having spent 2 days trying to get my hard disk in usable order again .. and I've tried DISKPART but can't seem to get it right.
So i am running windows 7 and vista on a dual boot Vista hard drive is C: while Windows 7 is B: now i am kinda low on memory on B: and i wanted to re-size so i used "EASEUS Partition Master 6.5.2 Home Edition" and i shrinked C: and had 40gb unallocated space and i went to my C: drive and wanted to resize it but i could't. So i tried out disk management and i had no luck here too. So can any one tell me what i am doing wrong and how i can fix this?
View 4 Replies View RelatedI installed a new 1TB drive on my W7 pc. I created 2 partitions but now find I cannot shrink the C partition even when I have turned of system restore. Norton says the C drive has been defragmented and chkdsk reveals no faults. I need some extra space on the other partition for storage which is why I want to shring C where there is plenty of space
View 1 Replies View Relatedhow to resize partition c as I have not much space left in it and partition d has more space that I hardly use.
Partition c has windows 7 installed in it. how do I make this partition bigger by transfering some space from partition d to partition c?
Is there any reliable free software that I can use to do this? is this possbile or it is risky?
Windows 7 has been released for one month, many computer users have upgraded from old Windows version or installed Windows 7. Yes, new features of Windows 7 are wonderful, but there is a common problem Windows 7 users should pay attention to – partition size.
If you have installed Windows 7, you may find that the system partition free space become lower and lower, as basic Windows 7 installation requirement is 16GB and you have to install many other application. How to solve this problem? Backup all files, delete all partition, recreate partitions, restore? No, what a time-consuming job. Why not resize Windows 7 partition without so much complex works?
If you get ready for Windows 7, you'd better resize the system partition to be large enough and it will solve many problems after you installed Windows 7.
I recently installed a 90GB Kingston Technology SSD and then created a shadow copy of my previous hard drive (which was 62.4GB), meaning that currently I only have access to this amount of space on the new hard drive.
resize this boot partition to allow me to use all the space currently unallocated?
I'm using a Thinkpad T420s, dual booting Windows 7 and Fedora 16. However, prior to me installing F16, I used Disk management to shrink the Windows partition. Well...it turns out I shrunk it *way* too small and I'm barely able to use it. Under Disk Management, even if I create unallocated space, it still will not let me re-size my windows partition. I think this is because the partitions are in the wrong order...but I don't know what to do about it.
Disk management shows four partitions as follows from left to right:
| SYSTEM_DRV (1.46 GB, Primary) | Windows7_OS (67.47 GB, Primary, Boot) | (500 MB, Primary) | (76.63 GB, Primary) <--Fedora 16 |
No matter what I do, I cannot click "Extend Volume" on my Windows 7 partition. I would experiment and use certain bootable partition tools, but I'm afraid I'm going to mess with GRUB and I won't be able to boot either one of my OS's..
I resized a partition (the boot partition) using gparted off a linux boot disk (should be the same as any other program, though) after removing a backup partition which was never used. I rebooted the computer, and it ran startup repair. After startup repair had finished, I rebooted again. This time it boots into windows and gets to the login screen. I can log in, but it comes up with "welcome", followed by "preparing your desktop". It then loads a temporary profile. From there, I tried to load the control panel to load system so I could input the product key, but it wouldn't load the control panel because of an error I can't remember - but it displayed something like this: "{random nums and letters}"how to make it boot from a permenant account?
PS. I have access to command prompt as admin, and regedit. Also, I have another windows partition which I might be able to boot from. I also have a linux bootable CD, if that helps (can move around files from there)
I tried resizing my C drive but got an error message. It said something about dynamic discs ??after that when i tried to restart my hp laptop i got this error message:The message on boot states "windows failed to load. A recent hardware or software change may be the cause."The status is "Oxc000000f".The description is "The boot selection failed because a required device is inaccessible"what can i do to fix this problem? i am running check disc like the system suggested, but if it doesn't give me a solution will i need to re install or recover Windows 7 with my back up discs or using HP's system recovery?
View 5 Replies View RelatedI have a new notebook and I have used windows bit-locker on the C drive. My notebook didn't come with a TPM chip so I used a work around to get it working by using a flash drive with the keys installed on it, so I just plug the stick in at the boot process for everything to load up successfully. However Ive installed VMware and its taken up a lot of space on drive C.
What I want to do now is allocate some of the free space on the D: drive to the C drive, if that makes sense? Just to clarify my D: drive has no bit-locker encryption on it, but my C: drive does. Want I want to know is can i just use a partition tool to give the C drive some more space or will this cause problems as its using the bit-locker software? Also if I can do this, whats the best partition tool to use.
I've been trying for a couple days to get my windows seven out of temporary profile mode.ast weekend I downsized a document partition to grow the windows partition by 15gb, using ubuntu's live-cd gParted program. And now I'm stuck with what to do.So far I have tried fixboot, fixmbr, rebuildbcd with no luck. (with windows cd recovery console)I am unable to access any type of administrative tools when i fire up windows (after starting explorer.exe manually). I have a basic windows desktop available to me, but like I said I can't open explorer or control panel, as i get either an error : "explorer.exe No such interface supported"r"::{string of numbers and letters} No such interface supported"Concerning cmd.exe, I can launch it and explore my partitions but everything else seems locked, and I can't run it as administrator.It seems like windows has rearranged its letters too; windows used to be on E: but now finds itself on D:, and the cd drive has gone from D: to E:.Trying to run regedit says that it can't find D:Windows
View 2 Replies View RelatedThey take 20 Gigs of the 120 Gig drive for a recovery partition.A very poor choice on so small a drive. Plus then they use 30 Gigs more for Windows and their included features / bloatware. So there is only 70 Gigs left for programs and storage. Not the user experience that I think Samsung wants me to have. Enough of the rant.How do I get rid of this or resize the 20 gig recovery partition? I don't mind 1-200 Megs for a recovery partition and I think that I want the recovery feature, but 20 Gigs is way too much. I don't mind having Windows on an external disk, but I don't want it taking up a lot of valuable storage on the computer
View 14 Replies View RelatedI have windows 7 RC, windows vista, and linux mint running in a triple boot config. I don't really want to keep linux and was planning on installing the Retail version of Windows 7 once i buy it. However, while im booted in windows, i cannot see linux at all. I can only see the Windows 7 partition (C: ) and vista partition (D: ) under Computer.
But i can see it in Disk Management
The last two partitions are for linux.
So my question is, when i decide to install windows 7, will the windows 7 install disc see those linux partitions so i can delete them while installing Windows 7? You know the utility in the Windows 7 install disc that allows u to delete, format etc. partitions.
I have an older computer that is or was being used for Win XP Pro. I put a new hard drive that is partitioned with 25gb on the C drive with two other partitions of different sizes. I set the the hard drive as cable select (later tried as Master only)
Windows 7 in cable select saw all the partitions. When set to Master it only saw Partition 1 and the rest as unallocated which seems weird.
I have the boot order in Bios set as Floppy, CD Rom and then Hard Drive.
I have an external usb DVD reader for the install disc.
When i start the pc, then press to boot from CD, it sees the install disk and the install process starts. I get to the point to select where to install and I get this Notice:
"Windows can NOT be installed on to Disk 0 Partition 1"
I hit the more info button and get this notice:
"The computer hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the BIOS Menu."
It should boot to the hard drive the way I have it setup. At least it does for Win XP.
I was wondering if anyone has any suggestion as to how to get around this issue.
I have no idea what that partition is for, but why are people up in arms about it. Who cares?
View 5 Replies View RelatedI installed Win 7 on a partition on the same drive as XP.
1 - XP was on C: Win 7 installed to F:
2 - I have removed XP from C:.
3 - Repaired Win 7. Win 7 boots fine.
Now I want to move Win 7 to the beginning of the drive but unsure how - as Acronis doesn't allow me to clone to the same drive - even though its another partition.
Is there any way round this?
I am using Windows 7 Home Premium N and XP Home on a dual-boot system but I want to move my Windows 7 partition from one drive to another but am not sure how to do it. Currently XP is on partition C: and Windows 7 on partition O: and essentially, what I want to do is to move partition O: to my main drive where space is already available for this to be done.
I have seven drives on my system amounting to 6.5Tb (2Tb on external drives) and currently Windows 7 is on a partition on one of the internal 1Tb drives. However, I would like to free up the space being used and place Windows 7 in a separate 50Gb partition at the end of my main drive (500Gb). Since I pre-partitioned the current Windows 7 partition before installation, I do not have the 'hidden' partition I've read so much about.
I have an old DOS version of Ghost on a boot CD and can readily back up the current Windows 7 partition ready for recovering to the prepared partition on my main drive. Once transferred I then want to delete the current Windows 7 partition. However, I know there is more to it than this! I am quite happy to reletter the partition to drive O: since I have software installed on the Windows 7 partition which is referred to in the registry.
All this I'm fairly confident about doing - but it is operations involving the boot manager that I am completely unsure of. How does the system know where the boot info is located? What points it to the right partition/drive? Does it refer to the drive and/or partition? Is there anything else I just may have overlooked? Finally, should I perhaps just leave it where it is until I'm ready to do a reinstall on the appropriate partition?
A lot of questions I'm afraid but I would appreciate some help as I'm fairly new to the question of dual-boot systems and boot management.
PS I have been looking for info on this in all sorts of places but have not so far found the answers to my questions. Sorry for any inconvenience if the info I'm looking for is already on this, or another, site. It's just that I've not found the info so far and any help being pointed in the right direction would be appreciated.
I'm currently running Windows XP (SP3)and am trying to run the Windows 7 Home Premium upgrade. Each time the installation gets to the point of starting to erase the XP program files and load the Win 7 files and stops with a statement that it doesn't recognize the C partition where XP is installed. The PC has a single SATA HD with only a single partition. Is there some step that's left of the installation instructions that I could be missing?
View 6 Replies View RelatedIs it possible to install Windows 7 on a GPT disk?
I created a RAID 0 array on my dual Xeon 5580 system and tried installing Windows 7 Ultimate 64-bit RTM. When I got to the "Where do you want to install Windows" part I used shift-F10 to open up a command window, then I used diskpart to create a GPT with the following partitions:
Disk 0 Part 1 - 102 MB EFI System
Disk 0 Part 2 - 128 MB MSR
Disk 0 Part 3 - 500 MB Primary
Disk 0 Part 4 - 7446 GB Primary
But there was a message "Windows cannot be installed to Disk 0 Partition 3 (show details)" - clicking on "show details" gave me "Windows cannot be installed to this disk. The selected disk is of the GPT partition style."
What gives? I thought Windows Vista and beyond supported GPT.
The problem with MBR is that you can't have a file system larger than 2 TB.
So heres my problem: I installed Win 7 on a drive a while back and earlier today I decided that I needed more hard drive space. I saw that I had 100gb of unallocated space on the drive, but it was behind my Windows 7 partition, making it impossible to resize that partition. So I defragged with Perfect Disk 10 which moves all the files to the back of the partition, cleaned up, disabled all the usual things, ran defragger again, and then booted into a live cd of GParted. I then proceeded to move my Windows 7 partition behind the unallocated space so I could extend the volume.
Unfortunately, something went wrong and now I get the error message "Disk boot failure, please instert system disk and hit enter." So I followed the directions and ran startup repair, tried manually creating the bootmgr, and ran all the tests, but it still doesn't work. Luckily for me, I was able to reinstall Windows 7 on the unallocated space so I can at least get to the files on my other drive, which I discovered are all perfectly fine. I'm hoping this will be a quick fix since it seems like all the files are ok. What should I do so that I can boot back into that partition?
Long story short, I tried moving the partition, and something went wrong, and now I can't boot into that drive. I installed another copy of Win 7 on another partition and all the files are ok. What do I need to do to the original partition to get it to boot again?
I am having a problem that seems more like a Win XP problem, but since its part of my migration to Windows 7 and many people these days may be trying the same.
As I said, I am in the progress of migrating to Windows 7. As a transient solution until I have transferred and re-installed everything under Windows 7 I want to have a dual boot capability, i.e. I bought me a larger HD, created two partitions on it, installed Windows 7 on the first partition, and then I used a disk-imager (Acronis Disk Director) to copy my entire old XP disk 1:1 to the second partition of the new HD. I then set things up so I can choose between the two partitions using the Windows 7 boot manager. After some fiddling the choosing and booting in principle works fine.
BUT, when I try to start WinXP, I have the very strange effect, that the system at first boots and starts WinXP up fine up to the point where it presents the login screen. When I then enter my name and password my credentials at first seem to be accepted, i.e. I get a "Loading your settings..." dialog but to my dismay only seconds later that dialog always turns into "Logging off..." (???!@#@$&!) at which point the system hangs for some long period. If I wait long enough (~5 minutes) it eventually returns to the login screen again. I also tried to login as Administator but that failed as well (the error message mumbled something about no domain server to verify my id which is complete nonsense, since my XP system was never part of any domain, so there is no server in the world that could verify anything here!).
Any idea what could cause this and why can't I not log into that copied/moved 1:1 Window XP installation? Any hints/suggestions/pointers would be highly welcome!
I have a small query about this whole partitioning business. I'm trying to set up a partition so I can dual-boot Windows 7 and Ubuntu.
My computer came with a Dell Recovery partition and an OEM partition as well as the main C: drive, which are all primaries. I've created a new logical drive, which I've called Z:, with the idea being to install the Linux OS in that chunk of the drive.
My first question: First up, I've formatted it as "exFAT" - is this the same as FAT32?
Next question: can I divide this 'Z' into smaller chunks with different formats, or do they all have to be the same format? I was hoping to be able to format a small bit of the drive into a Linux file-system so that both OSs can be kept entirely separate from each other, but leave the bulk of it as FAT so that I can see my files with both OSs. If this is not possible, what would be the best way to achieve the desired result?
Having obtained my new 80GB Intel X-25M SSD I will of course be using it as the Windows Partition in my new installation after I receive my release copy on 22nd October.
However, I was wondering on the best way to partition the remainder of my storage to maximise performance, and particularly where I place the swap file, applications and data.
The Maxtor was the original HD that came with the PC and is approaching 4 years old. I obviously don't want to use it for anything that affects performance so the obvious usage is as a backup volume. However, I'm not sure of the wisdom of this given it is the oldest drive!
So, my current plan is as follows:Boot & Windows Partition, including application installation: All 74.5GB of the available SSD Swap File: A seperate 10GB partition of the WD drive Data: The remainder of the WD Drive (Can you get Windows 7 to move the location of the User Folders such as 'Documents', 'Downloads' etc. to a partition other than the system drive? If so how?) Backup: The Maxtor Drive Even though I am getting a full version of Win 7 by virtue of the UK Pre-Order offer, I won't be maintaining my Vista install so no need for a partition for that (good riddance!).
It is important that the swap file is not on the SSD I understand to reduce the number of write cycles and maintain its lifespan.
Does this sound like a good plan to maximise performance? Certainly using the seperate swap file seems to work very well in my RC test installation.
Would anything happen to my other partition when i format win XP to win 7 in C: drive/partition?
Okay it goes like this, I have Win XP SP3 installed with two partitions, C: and E: (<----supposed to be D: ). I intend to install Win 7 Ultimate on my computer from XP SP3 and install it in C: where the current OS is at. My question is, will my E: partition prevail still? Will the reformatting touch E:?
The reason is because there is where i want to put my backups and later migrate it.
I'm trying to install Windows 7 Professional on a system with the 2nd hard drive partition - 100GB in size. I used Paragon Partition Manger to create the two partitions, formatting both as NTFS.
Windows XP isproperly installed on the first partition. When I try to install Windows 7 Pro on the second partition it extracts the files & installs fine right up to the point of rebooting, then gives me this error on rebooting:
File: windowssystem32winload.exe
Status: 0xc000000d
The selected entry could not be loaded because the application is missing or corrupt.
I've purchased four Win 7 Pro license keys from MS and already sucessfully loaded Windows 7 Pro on three computers with a single partition HDD, using the DVD (downloaded from digitalrivers) w/o any problems - so one would think the DVD itself is OK.
Any ideas why I can install Windows 7 Pro (using the same DVD) just fine on a single (simple) partition but get this error when trying to install on a seperate partition?
im trying to dual boot windows 7 beside my already installed vista HP , when i try shrink my c partition with the inbuilt vista partition tool , to create room for the windows 7 partition , it will only allow me to shrink roughly 2000 MB of the drive even though there is 45% of a 250 GB drive still available .
they reccomend at least 16GB of free space to install it,
where am i going wrong , im a little confused ,
I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version)
I sucessfully upgraded from Vista 32 to Windows 7 32
Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB)
Now I would like to go from Windows 7 32bit to 64bit
When I try and run the Windows 7-P-retail-en-us.x64.exe file it upacks the box then stops with this error:"We are unable to create or save files in the folder in which this application was downloaded. Please check the folder properties to make sure that you have security permission on the folder to write flies and that that folder is not read only".
I am the System Admin and I have full rights, and have moved the exe and the setup box files to My Documentsand I have modified the directory properties/attributes but I still get the same error over and over.
I searched the posts and some people stated one needs a clean install others say you can upgrade from any version so I am trying the upgrade here especially since the upgrade from Vista 32 to Windows 7 32 was smooth and did require all the extra work of a reinstall.
how do I resize desktop
View 1 Replies View RelatedIs it possible to upgrade in place from Windows 7 32bit to Windows 7 64bit.
Is it better to do a clean new 64bit install?