Move Win7 To New Partition On Same Drive

Nov 25, 2009

I installed Win 7 on a partition on the same drive as XP.

1 - XP was on C: Win 7 installed to F:

2 - I have removed XP from C:.

3 - Repaired Win 7. Win 7 boots fine.

Now I want to move Win 7 to the beginning of the drive but unsure how - as Acronis doesn't allow me to clone to the same drive - even though its another partition.

Is there any way round this?

View 9 Replies


ADVERTISEMENT

Moving Win7 Partition To Another Drive

Jan 2, 2010

I am using Windows 7 Home Premium N and XP Home on a dual-boot system but I want to move my Windows 7 partition from one drive to another but am not sure how to do it. Currently XP is on partition C: and Windows 7 on partition O: and essentially, what I want to do is to move partition O: to my main drive where space is already available for this to be done.

I have seven drives on my system amounting to 6.5Tb (2Tb on external drives) and currently Windows 7 is on a partition on one of the internal 1Tb drives. However, I would like to free up the space being used and place Windows 7 in a separate 50Gb partition at the end of my main drive (500Gb). Since I pre-partitioned the current Windows 7 partition before installation, I do not have the 'hidden' partition I've read so much about.

I have an old DOS version of Ghost on a boot CD and can readily back up the current Windows 7 partition ready for recovering to the prepared partition on my main drive. Once transferred I then want to delete the current Windows 7 partition. However, I know there is more to it than this! I am quite happy to reletter the partition to drive O: since I have software installed on the Windows 7 partition which is referred to in the registry.

All this I'm fairly confident about doing - but it is operations involving the boot manager that I am completely unsure of. How does the system know where the boot info is located? What points it to the right partition/drive? Does it refer to the drive and/or partition? Is there anything else I just may have overlooked? Finally, should I perhaps just leave it where it is until I'm ready to do a reinstall on the appropriate partition?

A lot of questions I'm afraid but I would appreciate some help as I'm fairly new to the question of dual-boot systems and boot management.

PS I have been looking for info on this in all sorts of places but have not so far found the answers to my questions. Sorry for any inconvenience if the info I'm looking for is already on this, or another, site. It's just that I've not found the info so far and any help being pointed in the right direction would be appreciated.

View 9 Replies View Related

Drive Partition Planning For Win7 Installation

Sep 15, 2009

Having obtained my new 80GB Intel X-25M SSD I will of course be using it as the Windows Partition in my new installation after I receive my release copy on 22nd October.

However, I was wondering on the best way to partition the remainder of my storage to maximise performance, and particularly where I place the swap file, applications and data.

The Maxtor was the original HD that came with the PC and is approaching 4 years old. I obviously don't want to use it for anything that affects performance so the obvious usage is as a backup volume. However, I'm not sure of the wisdom of this given it is the oldest drive!

So, my current plan is as follows:Boot & Windows Partition, including application installation: All 74.5GB of the available SSD Swap File: A seperate 10GB partition of the WD drive Data: The remainder of the WD Drive (Can you get Windows 7 to move the location of the User Folders such as 'Documents', 'Downloads' etc. to a partition other than the system drive? If so how?) Backup: The Maxtor Drive Even though I am getting a full version of Win 7 by virtue of the UK Pre-Order offer, I won't be maintaining my Vista install so no need for a partition for that (good riddance!).

It is important that the swap file is not on the SSD I understand to reduce the number of write cycles and maintain its lifespan.

Does this sound like a good plan to maximise performance? Certainly using the seperate swap file seems to work very well in my RC test installation.

View 7 Replies View Related

How To Move Page File From C: Partition To Another Partition

Mar 27, 2011

I am trying to keep the size of Image Files as small as possible. I'm told that it helps to keep these files from getting too big if I move the Page File away from the drive being imaged - in this case , my C: bootable drive.

View 9 Replies View Related

How To Move Win 7 Partition To Vista Partition ?

Jan 7, 2010

I got a disk drive with 3 partitions...

1 - vista 64 (50GB)

2 - win 7 64 (30GB)

3 - data (80GB)

I want to move win 7 installation to vista partition and extend partition 3 with freed partition 2.

-I though to do this

-Backup win 7 to external drive

-boot from cd installation

-choose to restore win 7 in partition 1

-After it boots correctly, resize partition 3 adding partition 2.

I realized that boot files are in partition 1, when I tried in windows 7 to backup system (partition 2) it want sto backup full partition 1, because it's part of system and partition 1 is considered critical.

Any procedure to accomplish this?

View 4 Replies View Related

How To Move C:Users On A Different Partition

Sep 8, 2011

Used to be a time when I kept my the WIndows and core apps n a C partition, and my large users files on a D partition. In that way

- the C was samll, easily imaged to a second drive, etc,

- all data file were on the D partition, easily backed up to another drive

These days, with super large drives, and Windows expecting files in C:Users, I found myself keeping everything on the same partition - make those images much bigger and longer to create (unless one uses image software that allow oyu to exlcude folders) Is thee a way to tell Windows to look elsewehre (ie on another partition) for the user files its typically expects to see under C:Users ??

View 4 Replies View Related

How To Move Windows 7 From D Partition To C

Jun 24, 2010

Installed Windows 7 but accidentally did it on the d: drive. Now have dual OS - Vista and Win 7. Want to keep Win 7. Have read many threads on how to get rid of Vista partition by moving boot folder from Vista to win 7 first but after doing so and going to disc mgt it says it's using info from C: when I try to re-format the volume. Essentially here's my issue: I want Win 7 to be on the C: partition, not the D: because D: is listed as a recovery partition with limited space. How can I do that? (or can I?)

View 1 Replies View Related

Move User Folder To A Different Partition?

Aug 29, 2011

Just got a new laptop with win7 and the hard drive is in 2 partitions. I would like to move my user folder to the d: drive from its default c: drive location. I attempted this before on a vista machine the move function by right clicking on the folder but this gave me very undrsireable results and problems. I would like to avoid this and do it right.can this be done with windows 7

View 14 Replies View Related

Move Files Between XP & Windows 7 Partition?

Jan 2, 2012

I currently running a dual boot system. However, I haven't been able to copy files from one partition to another i.e from XP to Win & or vice versa. For e.g. i can't find any music file in my XP partition, it's like it's not there even though i searched through drive C (XP) from drive D (win 7). I still use XP more but do my gaming on win 7.

View 6 Replies View Related

Move Any File To Another Folder Or Partition?

Sep 20, 2010

i have this problem when i try to move any file to another folder or partition

View 9 Replies View Related

Wanting To Move User Folders To Another Partition

Sep 25, 2012

If I run multiple OSes, having all the User folders in a partition by itself might eliminate duplication. If there is a thread on how to redirect the the user folders, that would be helpful. Noticed that even with Admin authority I can't move all the files in C:User.Need to mention I use just one User and give it Admin privileges, so maybe the easy way would be just set up a Drive D and put all my User data there.

View 2 Replies View Related

Move Partition To The Front Of The Disk (the Fastest Part)?

Jan 11, 2011

Atm I have 500GB array from two 250GB in raid0 with Vista on it... its using up about 90GB of space (leaving around 375GB free) and I want to shrink the partition to say 100GB (see below). Then I want to reformat the unallocated space (~350GB) to be used by my Windows 7 install on my SSD. I know you can use the Disk Management in device manager to do all this but I want the 350GB free space partition to be at the front of the disk (the fastest) and have the old 100GB Vista partition right at the end (in the slowest part I guess, which its ok cos I will rarely boot into it).

About above... just wondering when I shrink the partition to 100GB even though it is only using 90GB is 10GB a good enough buffer for windows to not spaz out? Or is it even too much can I get away with just 2-3GB buffer... I wont be installing or writing anything new to it. It will be mainly just for reading data and booting.

View 6 Replies View Related

Move System Reserve Partition To System Partition C:

Jun 28, 2012

Through a series of shenanigans involving experiments with mirroring on Windows 7 64 bit using Disk Management, and then subsequently removing the mirror after having recurring errors/problems with the synching, My 100MB System Reserve partition has ended up on a separate partition than my system image. For instance: Disk 1 System C: Healthy (Boot, page...) Disk 0 Healthy (System Reserved...).

In addition, the System Reserved partition has been assigned a drive letter "G:" or "E:" and is now visible in explorer and it won't allow me to remove it and supress from explorer view.

I'd like to

1) move/create the System Reserve partition to Disk 1 (with System C: drive)

2) remove the System Reserve partition from Disk 0 to free it all up as a data drive

Do I use command below to create a System Reserve on Disk 1? bcdboot C:Windows How do I then delete the System Reserve partition on Disk 0. Also a byproduct of all of this, when I reboot now, I have a "Windows 7" option and a "Windows 7 Secondary Plex" option. The "Windows 7" option no longer boots (it's stops while the logo panes are flying in circles to form the logo and goes into a fix loop that never fixes it). I have a feeling it's looking for the old mirrored hardware configuration or something. However, "Window 7 Secondary Plex" option does boot just fine. Do I use MSCONFIG to remove the "Windows 7" boot entry so I don't get this annoying option at boot?

View 9 Replies View Related

How To Resize Win7 Partition ?

Sep 6, 2009

i read all the topics from here but i am unable to resize my win 7 partition .

i think the problem is that the free space is in the extended partition . how to get the free space from the extended partition without erase or format the other partition (D and E)

http://i31.tinypic.com/2cr3dx1.jpg

I try a lot of programs but no one works becouse the free space is inside the extended partition

View 9 Replies View Related

Linux Partition In Win7

Dec 24, 2009

I have windows 7 RC, windows vista, and linux mint running in a triple boot config. I don't really want to keep linux and was planning on installing the Retail version of Windows 7 once i buy it. However, while im booted in windows, i cannot see linux at all. I can only see the Windows 7 partition (C: ) and vista partition (D: ) under Computer.

But i can see it in Disk Management

The last two partitions are for linux.

So my question is, when i decide to install windows 7, will the windows 7 install disc see those linux partitions so i can delete them while installing Windows 7? You know the utility in the Windows 7 install disc that allows u to delete, format etc. partitions.

View 3 Replies View Related

Win7 Will Not Install On Partition 0

Mar 15, 2009

I have an older computer that is or was being used for Win XP Pro. I put a new hard drive that is partitioned with 25gb on the C drive with two other partitions of different sizes. I set the the hard drive as cable select (later tried as Master only)

Windows 7 in cable select saw all the partitions. When set to Master it only saw Partition 1 and the rest as unallocated which seems weird.

I have the boot order in Bios set as Floppy, CD Rom and then Hard Drive.

I have an external usb DVD reader for the install disc.

When i start the pc, then press to boot from CD, it sees the install disk and the install process starts. I get to the point to select where to install and I get this Notice:

"Windows can NOT be installed on to Disk 0 Partition 1"

I hit the more info button and get this notice:

"The computer hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the BIOS Menu."

It should boot to the hard drive the way I have it setup. At least it does for Win XP.

I was wondering if anyone has any suggestion as to how to get around this issue.

View 6 Replies View Related

Win7 Create An Extra 200 MB Partition

Nov 11, 2009

I have no idea what that partition is for, but why are people up in arms about it. Who cares?

View 5 Replies View Related

Removing XP And Resize Win7 Partition

May 13, 2009

I am running Windows 7 all great and haven't had any problems, I want to make Windows 7 my sole operating system and remove my XP partition. I managed to install Windows 7 on a separate partition with no problems but just wondering if it's all fine to go ahead and delete my XP partition and then resize my Windows 7 partition back up, this wouldn't create any problems?

Just a matter of backing up all the essentials first, just in case?

View 1 Replies View Related

Upgrade Xp To Win7 - Partition Not Recognized

Oct 27, 2009

I'm currently running Windows XP (SP3)and am trying to run the Windows 7 Home Premium upgrade. Each time the installation gets to the point of starting to erase the XP program files and load the Win 7 files and stops with a statement that it doesn't recognize the C partition where XP is installed. The PC has a single SATA HD with only a single partition. Is there some step that's left of the installation instructions that I could be missing?

View 6 Replies View Related

Can't Install Win7 On GUID Partition Table

Sep 21, 2009

Is it possible to install Windows 7 on a GPT disk?

I created a RAID 0 array on my dual Xeon 5580 system and tried installing Windows 7 Ultimate 64-bit RTM. When I got to the "Where do you want to install Windows" part I used shift-F10 to open up a command window, then I used diskpart to create a GPT with the following partitions:

Disk 0 Part 1 - 102 MB EFI System

Disk 0 Part 2 - 128 MB MSR

Disk 0 Part 3 - 500 MB Primary

Disk 0 Part 4 - 7446 GB Primary

But there was a message "Windows cannot be installed to Disk 0 Partition 3 (show details)" - clicking on "show details" gave me "Windows cannot be installed to this disk. The selected disk is of the GPT partition style."

What gives? I thought Windows Vista and beyond supported GPT.

The problem with MBR is that you can't have a file system larger than 2 TB.

View 6 Replies View Related

Win7 Doesn't Boot After Moving Partition

Sep 25, 2009

So heres my problem: I installed Win 7 on a drive a while back and earlier today I decided that I needed more hard drive space. I saw that I had 100gb of unallocated space on the drive, but it was behind my Windows 7 partition, making it impossible to resize that partition. So I defragged with Perfect Disk 10 which moves all the files to the back of the partition, cleaned up, disabled all the usual things, ran defragger again, and then booted into a live cd of GParted. I then proceeded to move my Windows 7 partition behind the unallocated space so I could extend the volume.

Unfortunately, something went wrong and now I get the error message "Disk boot failure, please instert system disk and hit enter." So I followed the directions and ran startup repair, tried manually creating the bootmgr, and ran all the tests, but it still doesn't work. Luckily for me, I was able to reinstall Windows 7 on the unallocated space so I can at least get to the files on my other drive, which I discovered are all perfectly fine. I'm hoping this will be a quick fix since it seems like all the files are ok. What should I do so that I can boot back into that partition?

Long story short, I tried moving the partition, and something went wrong, and now I can't boot into that drive. I installed another copy of Win 7 on another partition and all the files are ok. What do I need to do to the original partition to get it to boot again?

View 9 Replies View Related

Dual Boot Win7 And XP - Unable To Log Into XP Partition

Nov 25, 2009

I am having a problem that seems more like a Win XP problem, but since its part of my migration to Windows 7 and many people these days may be trying the same.

As I said, I am in the progress of migrating to Windows 7. As a transient solution until I have transferred and re-installed everything under Windows 7 I want to have a dual boot capability, i.e. I bought me a larger HD, created two partitions on it, installed Windows 7 on the first partition, and then I used a disk-imager (Acronis Disk Director) to copy my entire old XP disk 1:1 to the second partition of the new HD. I then set things up so I can choose between the two partitions using the Windows 7 boot manager. After some fiddling the choosing and booting in principle works fine.

BUT, when I try to start WinXP, I have the very strange effect, that the system at first boots and starts WinXP up fine up to the point where it presents the login screen. When I then enter my name and password my credentials at first seem to be accepted, i.e. I get a "Loading your settings..." dialog but to my dismay only seconds later that dialog always turns into "Logging off..." (???!@#@$&!) at which point the system hangs for some long period. If I wait long enough (~5 minutes) it eventually returns to the login screen again. I also tried to login as Administator but that failed as well (the error message mumbled something about no domain server to verify my id which is complete nonsense, since my XP system was never part of any domain, so there is no server in the world that could verify anything here!).

Any idea what could cause this and why can't I not log into that copied/moved 1:1 Window XP installation? Any hints/suggestions/pointers would be highly welcome!

View 4 Replies View Related

Set Up A Partition To Dual Boot Win7 And Ubuntu

Dec 8, 2009

I have a small query about this whole partitioning business. I'm trying to set up a partition so I can dual-boot Windows 7 and Ubuntu.

My computer came with a Dell Recovery partition and an OEM partition as well as the main C: drive, which are all primaries. I've created a new logical drive, which I've called Z:, with the idea being to install the Linux OS in that chunk of the drive.

My first question: First up, I've formatted it as "exFAT" - is this the same as FAT32?

Next question: can I divide this 'Z' into smaller chunks with different formats, or do they all have to be the same format? I was hoping to be able to format a small bit of the drive into a Linux file-system so that both OSs can be kept entirely separate from each other, but leave the bulk of it as FAT so that I can see my files with both OSs. If this is not possible, what would be the best way to achieve the desired result?

View 1 Replies View Related

Formatting From WinXP To Win7 With Partition Problems

Jan 22, 2010

Would anything happen to my other partition when i format win XP to win 7 in C: drive/partition?

Okay it goes like this, I have Win XP SP3 installed with two partitions, C: and E: (<----supposed to be D: ). I intend to install Win 7 Ultimate on my computer from XP SP3 and install it in C: where the current OS is at. My question is, will my E: partition prevail still? Will the reformatting touch E:?
The reason is because there is where i want to put my backups and later migrate it.

View 6 Replies View Related

Unable Install Win7 On Separate Partition

Dec 1, 2009

I'm trying to install Windows 7 Professional on a system with the 2nd hard drive partition - 100GB in size. I used Paragon Partition Manger to create the two partitions, formatting both as NTFS.

Windows XP isproperly installed on the first partition. When I try to install Windows 7 Pro on the second partition it extracts the files & installs fine right up to the point of rebooting, then gives me this error on rebooting:

File: windowssystem32winload.exe

Status: 0xc000000d

The selected entry could not be loaded because the application is missing or corrupt.

I've purchased four Win 7 Pro license keys from MS and already sucessfully loaded Windows 7 Pro on three computers with a single partition HDD, using the DVD (downloaded from digitalrivers) w/o any problems - so one would think the DVD itself is OK.

Any ideas why I can install Windows 7 Pro (using the same DVD) just fine on a single (simple) partition but get this error when trying to install on a seperate partition?

View 3 Replies View Related

Dual Boot Win7 - Can't Shrink Partition Proper

Jun 10, 2009

im trying to dual boot windows 7 beside my already installed vista HP , when i try shrink my c partition with the inbuilt vista partition tool , to create room for the windows 7 partition , it will only allow me to shrink roughly 2000 MB of the drive even though there is 45% of a 250 GB drive still available .

they reccomend at least 16GB of free space to install it,

where am i going wrong , im a little confused ,

View 7 Replies View Related

Move Programs From Boot Drive To Data Drive?

Jan 10, 2013

How can I move programs and files from my ssd boot drive to my data drive (Windows 7 x64 PC)?

View 3 Replies View Related

Created A 20gb Partition On External Hard Drive / No Longer Require Partition

May 9, 2011

I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.

View 1 Replies View Related

Cannot Partition Hard Drive Due To Large Number Of Partition

Mar 30, 2011

i recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?

View 4 Replies View Related

Lost "My Documents" Folder When Trying To Move It To (D:) Partition?

May 2, 2012

My documents turned into local disk (D when trying to relocate "My Docs" to my second partition. Under the location tab I did not rename the folder and just left D:. Now local disk (D has seemed to replace "My Docs" folder. Please help me put "My Docs" back on (C. OS WIN 7?

View 1 Replies View Related

Move Windows 7 From One Drive To Another?

Dec 16, 2011

I have used many cloning software.

- Macrium Reflect
- EaseUS Disk Copy & Todo Backup
- RoboCopy
- Paragon Backup & Recovery

I'd like to move Windows from one drive to another without backing up THEN restoring. This is an extra step that I consider unnecessary.RoboCopy ALMOST did it correctly. But it corrupted the Outlook Registry. Microsoft recommended to uninstall and re-install Office.

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved