3tb Boot Drive Windows 7 Not Fully Recognized
Jul 17, 2012
I have a brand new set up that is running windows 7 64 bit on a ASrock H61M-GE, supports UEFI (not sure if it is automatically enabled) with a 3TB hdd that is the boot drive. There are no other hard drives available on the computer. Windows has only recognized 1.99TB of the drive in the OS, the other 7XXGB are unallocated. I would like this drive to be in "one piece" and be booted from. How should I go about making this work?
View 8 Replies
ADVERTISEMENT
Oct 28, 2011
I'm adding a third disk to my PC and am unable to get to a point where Win 7 recognizes the hardware with a drive letter. The Device Mgr says there are three hard drives attached and the Storage Controller tab recognizes the Marvel 91XX chipset and says the driver for the Sata III Ports is installed.
View 3 Replies
View Related
Oct 18, 2012
I used to run 2 WD Caviar Black 1TB each, I decided to get a 128gb Intel SSD, put the other 2 WD drives over to SATA port 2 and 3 with SSD on port 1. I did not format the WD drives since they both have data on it, port 2 WD still has Windows 7 installation on it.
When I started up after installing SSD, I went to BIOS to ensure everything is in working order, I noticed only 2 drives are detected, the SSD and WD on port 3. Tried several things like check connection, power connection, switched SATA cables, switched ports. Still no difference.
I went ahead and installed Windows 7 on SSD, disk manager does not detect WD on port 2.
Is it because that WD on port 2 still has windows installation files? How can I fix this? I have critical data on there that I need to access to.
View 3 Replies
View Related
Feb 7, 2012
I have windows 7 with a Verbatim 1TB external drive, the system is not recognising the external drive. When I switch it off and back on again it then recognises it and loads it in My Computer. I have another external USB drive which works just fine. This problem started after I formatted the PC and reinstalled windows 7. It worked fine before under the same OS. I tried another wire and plugged it into another port but still have the same problem.
View 9 Replies
View Related
Oct 28, 2009
I've created the ISO file and moved it to the 4g drive using the AWESOME guide found here. However, the BIOS doesn't seem to recognize that the device is present. I've done some research and found that some usb drives aren't compatible with the BIOS? I made usb storage the only available boot option and nothing showed up.
However when I look at the drive while in Vista through my computer->G: It shows up as a windows system. I've also seen somewhere about enabling "Legacy usb"? I didn't find anything like that. Should I just got buy another flash drive and try again?
View 6 Replies
View Related
Dec 4, 2011
A couple days ago the power flickered at my house (all my electronics and computer are hooked up to surge protectors), and when my computer came back on, it got to the starting windows screen with the animated logo, but never got past it to the logon screen. It stayed there for about 15 minutes before I shut it off and ran repair.I ran the repair utility, and it said after a while that it was "unable to repair" the problem, whatever that problem is. I ran bootrec /fixboot and bootrec /fixmbr successfully, but the problem continues. Chkdsk also found no problems.This is where it gets weird. I Reverted to an earlier restore point in hopes that would do it, and it still hung up on the startup screen. Last known good also made no difference. I got desperate and loaded a previous image of my computer (which took almost 6 hours), I left it re-imaging while I went to work, when I got home, it had completed, and was sitting on the windows startup screen, just like before. That's where I started to panic a bit.I reformatted the computer, as a last act of desperation to get my computer at least working, nevermind my data. It worked at first, I got in once it completed the install, but after installing some of my drivers and doing a few restarts, it once again hung up on the startup screen. The drivers I was using before all this happened I had been using for months with no problem, restarts included.
View 3 Replies
View Related
Dec 3, 2012
So i burned an .ISO Windows 7 ultimate ( 64 bit ) right now im running on ( 32 bit ) I can't install directly trought dekstop because i get this error "this installation disc isin't comaptible with your version of windows.." So i tried to boot with installation disc, after "setup is loading files" or something, i just get a windows 7 start up screen no letters or anything it just stays there. Only the cursor blue wheel thingy spins for few seconds. I tried different installation files.
View 7 Replies
View Related
Jan 28, 2013
How to full format my laptop hard drive. I have already Re install windows 7 in E: drive. Previously I have win-7 in C: drive after encounter some problems, Re-install new Windows 7 but that time I didn't format the hard disk that's why its install in drive E. Now when start the up of the lap top both selection are coming will start with old win or new win-7...and having some trouble with my windows 7 that's why I want to full format the hard dive without bootable disk and install new win-7.
View 2 Replies
View Related
Aug 6, 2012
My Dell W/64 computer has become very slow - Takes nearly 6 minutes to boot fully, with CPU running at top all that time. There are some 950 locked files that have shown up, and even when computer has been going for 30 minutes or more nearly everything is sluggish.
System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Professional, Service Pack 1, 64 bit
Processor: AMD Athlon(tm) Processor 2650e, AMD64 Family 15 Model 127 Stepping 2
Processor Count: 1
RAM: 3838 Mb
Graphics Card: ATI Radeon HD 3200 Graphics, 256 Mb
Hard Drives: C: Total - 694104 MB, Free - 586678 MB;
Motherboard: Dell Inc., 03D1TV
Antivirus: AVG Internet Security 2012, Updated and Enabled
View 3 Replies
View Related
Nov 18, 2012
I am trying to completely erase everything from my hard drive (windows are not installed on that hard drive). So is everything deleted by going to the hard drive and right click -> format? or does this do what a regular Windows 7 format does? I mean to completely erase all hidden files that can be restored and such.
View 5 Replies
View Related
Sep 27, 2011
Windows 7 is booting normally until it get stuck on a blue screen (not a BSOD) that says "Windows 7 7601 not genuine" on the bottom right corner. Problem is Windows won't go anywhere from here. I just can't do anything else (except ctrl-alt-supp which just allows me to reboot). As I can't get into Windows, I can't do anything to solve the problem.
This problem occured after I got rid off my XP partition (from a dual boot XP/seven) to keep only Seven. I had to use windows recovery tool from my Home premium CD to repair start up after that of course as I had lost my boot information (previously on XP). When I finally got Seven to boot normally (at least I thought) it just hanged there, on this beautiful blue screen, with nothing else than this false statement about my OS not being genuine (This is a genuine one that has been activated fro 2 years and worked perfectly fine). All I found on forums are people who seem to still get access to Windows and so figure out something with windows or cmd (like slmgr /rearm). But I can't even try all that, as windows doesn't want to load further. I tried in "safe mode" but it didn't change anything, Windows get stuck too.
View 9 Replies
View Related
Nov 10, 2012
Recently I changed the boot logo/screen on my computer to a custom one. When I got tired of it and wanted to change it back, I googled how I could restore it. Running the CMD as admin and typing "bcdedit %WinDir% /l en-US" would restore it back to its original boot logo. I tried it and then restarted my computer as instructed. As soon as it starts to boot up I get a message from the "Windows Boot Manager" telling me that there is a file that cannot be recognized: "windows/system32/winload.exe" My drivers for my keyboard are out of date apparently as I cant press "enter" to continue. It told me i could alternatively insert my windows 7 disc and restart. I inserted that disc and restarted and the same screen comes up.
View 3 Replies
View Related
Feb 9, 2010
I have an HP laptop which I recently upgraded from Windows XP Pro to Windows 7.
The flash drive (Lexar Firelfy 2GB) I was using on the XP OS can no longer be read under the Windows 7 OS. Information are stored in it (I am able to access it with computers other than mine), but my computer does not see them.
I have also tried different flash drives with the same results. Under disk management, my computer detects the flash drive but is unable to read it.
View 8 Replies
View Related
Mar 21, 2011
I recently installed Windows 7 Professional 32 bit on my computer. I actually installed it clean, because I had Ultimate on it; unfortunately, the copy I obtained was not genuine, so I got a genuine Professional in its stead. This problem started in, but I figured when I got a genuine copy of Windows, it would be fixed. No such luck.n is pressed; I have to stick a paperclip in the manual eject hole. The Device Manager doesn't even show that a CD Drive is installed, neither does any other program. I tried editing the registry myself and deleting the "upper filters" line, or whatever it is, but that didn't work. I have been attempting to find drivers, tools, or anything else that could help with this, but nothing seems to be working.Here are the specs for my computer: Product Specifications HP Pavilion dv2945se Entertainment Notebook PC - HP Customer Care (United States - English)
View 4 Replies
View Related
Jun 14, 2012
I am trying to fix a iOmega harddrive for a friend and the issue that he has is that the iOmega is not being recognized by his computer. The device has power, the disk is spinning and the led is on and stays constant, no flashing or anything. I have tried to see if the device was in Device Manager but it is not. The device is not being recognized by Windows 7 at all. No beeping noises when I plug it in or anything. I have tried multiple USB ports as well as other computers. The device just isn't being recognized.
View 1 Replies
View Related
Apr 4, 2011
I have two external USB drives, one independently-powered, one USB-cable-powered, both with NTFS and linux ext2 and ext3 partitions. Under Windows 7 both drives show up under Device Manager with the Property: "A driver (service) for this device has been disabled. An alternate driver may be providing this functionality. (Code 32)".
None of their partitions show up in "My Computer". (BTW, the partitions are all good and they are all usable from the linux side of my dualboot system.) I probably disabled the guilty service(s) myself. To get Windows 7 to work reasonably, I disabled all the services I thought I wouldn't need.
Which service(s) do I have to look at to get the disks to work again? The powered disk is a Hitachi HTS545016B9A300 and the unpowered one is the internal disk from my previous laptop, a "Seagate Desktop USB Device," both as reported by the Device Manager.
View 4 Replies
View Related
Jul 4, 2011
I have an external Samsung 640Gb hard drive which is not showing up in Windows Explorer, even though Device Manager shows it as recognized and working properly. I am running Windows 7 Home and this is something new as when I bought the drive it showed up in Explorer. I really need this drive as all my backups and programs are on it!
View 3 Replies
View Related
Oct 19, 2012
I have a terabyte external, WD Element I think. I have never had an issues before but today I plug it in (to play Diablo III) and it is not being recognized. At all. It's not in Disk Management, I can't find it anywhere. Suggestions or reasons this might be happening out of no where??
View 1 Replies
View Related
Dec 8, 2012
I have recently replaced my laptop with a new hard drive and extra 4GB ram slot,My laptop is a samsung np400b5b-s02uk, i've put in a Seagate 750GB SATA-II HD and a 4GB 1333MHZ Corsair Ram slot, I am trying to install Windows 7 Home (x64) onto it, i insert the disc into the drive but a message appears saying boot device not recognised, i've selected it to boot from CD in the BIOS but still nothing.
View 2 Replies
View Related
Jul 8, 2011
I'm having a bit of a problem with my DVD drives not being recognized. In a prior post, one of the fellows on this stream (Randy) solved the problem I'm having by suggesting that I edit the Upper and Lower Filters in the Registry. Unfortunately, I've lost this information. This time, I'll put it in a Jump Drive and lock in a safe!
View 2 Replies
View Related
Mar 3, 2012
I have a Sandisk Cruzer Titainium 4MB USB drive. It is recognized as a 'CD drive' and I can't do anything with it at all.
View 2 Replies
View Related
May 23, 2012
The other day, my computer seemed to totally stop recognizing that my CD/DVD drive even existed. No icon in my computer, with or without a disc in it.
View 1 Replies
View Related
Dec 28, 2009
Got windows 7 for xmas, 32 and 64 bit, been all over the internet trying to find a solution to this problem !!
the problem is basically when i put in my windows installation disc, its not recognised or appearing in the dvd drive on my computer.
The dvd works as i tried it on my friends pc last night to see if maybe they'd sent me a blank one or something.
It shows up as having nothing in the drive
My mobo is Asus p5n-d and my dvd is optiarc ad-1707S
Please help i can't take windows xp any longer
View 3 Replies
View Related
Dec 16, 2011
Cd is not recognized in dvd drive of my computer but dvd works ok. OS is Win7
View 3 Replies
View Related
Sep 30, 2012
when i plugged my 2gb sandisk in my laptop a massage appears that usb not reconized
View 3 Replies
View Related
Dec 7, 2012
my pendrive is not recognized by PC and it shows device driver software not successfully installed?
View 1 Replies
View Related
Aug 30, 2012
Why are SAN drives recognized as local drive while NAS drives aren't?I knew that SAN uses block level transfer to transfer data while NAS uses file level transfer. Does this has anything to do with why SAN drives and NAS drives are recognized differently by the computer?
View 2 Replies
View Related
Oct 8, 2012
I've built an 128gb Samsung (830 Series) SSD into my Acer RL70 Nettop. It was empty and when I tried to boot the nettop there was only the message "ERROR: No boot disk has been detected or the disk has failed". Then I connected the SSD to another computer and installed windows on it and it worked on that PC. When I put it pack into the Nettop i got the same error again. In the Bios, it shows the SSD correctly.
View 2 Replies
View Related
Aug 13, 2011
I have a cd with pictures on it from my holiday. When I got home I tried the disk in my ps3 and all the pictures were there I then tried it in the e drive of my pc but it doesn't recognize the disk at all. I have since tried it back in the ps3 and now that doesn't recognize it either. Am desperate to recover the pics??
View 1 Replies
View Related
Mar 16, 2012
I was wondering if somone could help me out. My dvd r, rw was allowing me to watch movies. but now windows 7 is only recognizing it as a burn and will not allow me to play dvds. If I put a DVD in to play it, the disc ejects and windows asks me to insert a a disc into d drive.
View 5 Replies
View Related
Nov 28, 2011
After removing a virus, my 3rd hard drive is no longer being recognize. Myapologies if this should be in hardware, but I didn't know if it was something that had to do with windows 7The virus was anti-virus protection 2011.I used antizeroaccess, stopzilla,avg(which is my normal antivirus), malwarebytes, and kaperskyYes all of them. It was a nasty virus.My main hard drive c: shows up as well as my second drive. e:. My other drive used to show up as well as f: but since all of this it hasn't. Nothing else was changed besides resetting the cmos battery and a couple of disconnect reconnections, becasue the drive wasn't showing up.Ide channel 0 master and Ide channel 0 slave (set to cable select). are the 2 hd'sIde channel 4 is a disk drive.The 3rd HD is also set to cable select. but that shouldn't matter cause that's what it was set to before.I also tried another spare hard drive I had with the same connections as the 3rd hard drive ( marked as slave and cable select). It was not found either.not in my computer or in bios
View 9 Replies
View Related