I have had 1000 issues, but i'm going to try and narrow it down. it seems like everytime I try to fix a computer, nothing ever just does what it is supposed to.At the moment I created a boot drive out of my flash drive with windows 7. I set it to boot first on my bios and it loads but hangs up on the first background screen after the windows logo and nothing happens.This info may help. I have two hard drives plugged in (IDE). the master is the one I want to do a clean install of windows. The slave drive already has windows and if I boot from it I can get to the desktop, but the problem is when I try to run the install from it and the computer restarts after the second step in the install for the main HD, it doesn't try to continue the install. Ive been working on this for a week.
Original Installation Disc which the PC is currently running (Vista x64 OEM) Windows 7 Technet Disc Fresh Ubuntu 9.1 (for testing purposes, also failed to boot)
I've tried: multiple discs each with a fresh download and burned .iso changing boot priority going through the Boot Menu to select the USB-FDD or CD-ROM options
But the computer boots right through each of the medias.
I can see that my USB and DVD-rom drive are both lighting up.. during before the screen launches to the big Windows Vista logo screen.
I have Windows 7 Ult-64 installed on my desktop. I made a USB flash drive with the installation files, so I know I can boot using a flash drive. I would like to be able to boot into Windows 7 using only a flash drive (no hard drives connected). Is this possible?
get a USB 3.0 flash drive to boot from a 3.0 port?I made a bootable ADATA 16GB USB 3.0 flash drive using LIli. Also used Yumi to make bootable flash drive. Either way it will not boot when plugged in a USB 3 port.It does not show up using BBS popup(F8). Nor does it show up in the bios.It will boot when plugged in a USB 2.0 port.Also, I can make a bootable USB 2.0 flash drive and can boot from it when plugged in 3.0 port. It shows up in the bios and the BBS popup. I have tried everything possible. No luck. I'm stumped. I have the latest bios and driver for this Renesas Electronics USB 3.0 Host Controller.
I have f* up my MBR partition(FAT32, is invalid now) and now W7 won't start. I haveen't made a rescue CD, as my lappy has no CD/DVD drive. Is there a tool to start W7 via USB port?
Does anyone know of a way to take several different ISO's (multiple Windows ISO'sUbuntu, Hiren's Boot CD, etc.) and put them onto a flash drive from which I can boot and select one?I've tried several different utilities thus far - unetbootin, YUMI,XBoot - but none have allowed me to successfully add all my images.
For security reasons, I would like to create a windows 7 X64 boot USB flash Drive , not an install drive. A drive where when I remove it, the system will not boot. What files do I need to put on the drive, or is there a progrm I can use to create it?
I am using a few USB sticks for readyboost and always have them in my hub. One of them was temporarily used to create an Ubuntu Live stick, but now that I removed Ubuntu from it about 32Mb remain used and I assume there is some bootable info in it, as Windows 7 is no longer booting with this stick inserted. I have tried formatting but this does not help. Is there a way to wipe the USB stick clean and remove any boot sector info?
I've created the ISO file and moved it to the 4g drive using the AWESOME guide found here. However, the BIOS doesn't seem to recognize that the device is present. I've done some research and found that some usb drives aren't compatible with the BIOS? I made usb storage the only available boot option and nothing showed up.
However when I look at the drive while in Vista through my computer->G: It shows up as a windows system. I've also seen somewhere about enabling "Legacy usb"? I didn't find anything like that. Should I just got buy another flash drive and try again?
[Solved] Setting up Dual Boot on a flash drive that isn't always plugged in. I have windows 7 Home Premium installed on my desktop but I was hoping for a way to set up an installation of Windows XP on a 16GB flash drive that I have.
Not even thinking I just figured I would give it a try and I booted to my Windows XP disc and installed all of the files to the flash drive. Well needless to say it messed up my MBR and then wouldn't boot to the flash drive or to my internal hard drives anymore.
I was able to fix it by using the Windows 7 disc to repair startup but I still am not able to boot to Windows XP on the flash drive.
Is there any way to do this? I know I need to make some changes to the bootloader but I'm not sure exactly what to do. Is there a way to make it so it will automatically boot Windows 7 unless I put the flash drive in first and prompt it to as the computer starts up?
i mounted my windows 7 iso with daemon, opened my cmd/disk part window and cleaned, partitioned, formated, and assigned the drive letter and then xcopied my mount to the flash drive, but it wont show up during boot up. i've done this a million times and its worked with this computer. im using the poopy mobo out of the a6430f hp computer. its an asus mobo.
How can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2 Processor Count: 4 RAM: 3839 Mb Graphics Card: ATI Radeon HD 4200, 256 Mb Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB; Motherboard: FOXCONN, 2AB1 Antivirus: Norton 360, Updated and Enabled
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
I know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
I recently ran into a very weird windows 7 bit problem after installing it on my desktop. I cannot copy large files/ holders into usb flash drive or write large files to cd/ dvd. The copying/ moving process would stay on for about 5-10 seconds then freezes then I get an error message. That is:
H: refers to a location that is unavailable. it could be on a hard drive on this computer...
I have all the latest drivers.
And windows/ nero 9 can't use my dvd drive to burn files.
Some info about my system: AMD X4 630 CPU. MSI KA780G (AMD 780G chipset) mobo. I have 2 sata hdds, non raid mode. The DVD drive is IDE. 4gb ram ddr2 ram. windows 7 64 bit.
When I put a flash USB drive in my Windows 7 machine it gives a beep and tells me that the drivers have been loaded and the drive is ready for use.But I can't see it anywhere, it shows in 'Devices and Printers' but won't open from there.How do I get it to show up when I open 'Computer' from the Start button please.Tech Suppot Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bitProcessor: AMD Phenom(tm) 9950 Quad-Core Processor, x64 Family 16 Model 2 Stepping 3Processor Count: 4RAM: 3583 MbGraphics Card: ATI Radeon HD 3600 Series, 512 MbHard Drives: C: Total - 305141 MB, Free - 183571 MB; E: Total - 953867 MB, Free - 669909 MB; Motherboard: ASRock, N68C-S UCC,,Antivirus: Microsoft Security Essentials, Updated and Enabled
I have a staples relay flash drive on my dell latitude E-6500 I have down loaded info on it and when I try to recover the info i get no message or icon to tell me it is working I bought it 2 months ago could you tell me what the steps are to use it?
I used to create USB boots using the Program Ultra ISO and boot and install windows with my USB flash. But this time it isn't possible. When I choose to boot from USB, a black page comes, giving the message : Start booting from usb device ... but it remains on this page and nothing further happens. I tried the same flash on another system and it booted completely. It shows that the USB is written correctly and it must be something wrong with my system.
Downloaded MP3 Rocket from Cnet but requires a flash player 11. Downloaded it but kept getting a mesage: "A newer version already installed" which is not true. Tried to install an older version but Adobe won't let me install it as it says there is a new version of it.By the way, I had Adobe Flash Player before and it worked!
I just purchased a new USB 256 GB flash drive to transfer documents from my desktop to the flash drive after the process completed I rebooted the computer when I opened my computer the flash drive was showing invalid characters when I opened a flash drive document they also had invalid characters labeled to them and I get the following error " The filename, directory name, or volume label syntax is incorrect."
I unfortunately forgot my windows 7 password of my netbook. However, I was able to find this bootable iso image that removes and windows password. it works great when burnt on a cd and booted from bios but as u know netbooks dun have cd drives. so my qeustion is is there a way to burn the iso image to a usb flash drive from which i can boot from it?
I tried to install Malwarebytes Anti-Malware on a flash drive to be able to run it on another computer but I get an error message. It appears that the data file containing the list of possible infections was installed on my C: drive. Is it possible to run this program on another computer from a flash drive? The error I receive is 'Run time error 13...Type mismatch'.
How do I download a file from a flashdrive to Windows 7? I did this once before with no problem, but for some reason was unable to correctly do it today.
Is there a way I can partition my USB flash drive without any third party tools? And, is there any way I can use an autorun.inf file in Windows 7? It works fine in XP and Vista but what about windows 7? I have a batch file on it where it will run silently and take a users documents and transfer the files to the USB.
If I plug my flash drive into my PC using Windows XP, it works fine.No problems.But when I plug it into my laptop, using Windows 7 it will not load it.It says newhardware detected, installing new hardware, Hardware installation failed.If I go Device Manager, It is listed under Unknown Devices.I have tried to uninstall all the USB Root Hubs, Restart the computer, in-order for it to auto re-install with the USB in / out of the computer. But it still fails.
about my a4tech pocket usb when i plugged it to my toshiba satellite e1802 it read as generic usb but when i plugged my usb flash drive it doesnt read by my a4tech pocket usb hub.
I know that this question is not associated with this topic but i need help.Ive typed in following command in command prompt bootsect /nt60 and my flash drive is not readable any more...is there any command to reverse mentioned command?I was trying to make bootable usb drive and now i cant access my usb flash anymore and i had some important files on that flash.
I have never needed to do this before, so I have no knowledge on the subject. I have a user who will be taking data home once a week, so I want to encrypt or at least password-protect her flash drive. It will contain regular, typical Office documents.Now, the tricky part is, she has a Dell PC running Windows 7 Pro in the office, and a Macbook laptop at home (not running any version of Windows). Does something exist, especially free, that will allow me protect her flash drive, and make it accessible to her on either computer?I need to do this for now, temporarily. I'm trying to convince my CEO that DropBox and others are just as safe and roughly the same process....but for now, I have to make the flash drive work.
