When I put a flash USB drive in my Windows 7 machine it gives a beep and tells me that the drivers have been loaded and the drive is ready for use.But I can't see it anywhere, it shows in 'Devices and Printers' but won't open from there.How do I get it to show up when I open 'Computer' from the Start button please.Tech Suppot Guy System Info Utility version 1.0.0.1OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 32 bitProcessor: AMD Phenom(tm) 9950 Quad-Core Processor, x64 Family 16 Model 2 Stepping 3Processor Count: 4RAM: 3583 MbGraphics Card: ATI Radeon HD 3600 Series, 512 MbHard Drives: C: Total - 305141 MB, Free - 183571 MB; E: Total - 953867 MB, Free - 669909 MB; Motherboard: ASRock, N68C-S UCC,,Antivirus: Microsoft Security Essentials, Updated and Enabled
How can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2 Processor Count: 4 RAM: 3839 Mb Graphics Card: ATI Radeon HD 4200, 256 Mb Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB; Motherboard: FOXCONN, 2AB1 Antivirus: Norton 360, Updated and Enabled
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
I know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
I recently ran into a very weird windows 7 bit problem after installing it on my desktop. I cannot copy large files/ holders into usb flash drive or write large files to cd/ dvd. The copying/ moving process would stay on for about 5-10 seconds then freezes then I get an error message. That is:
H: refers to a location that is unavailable. it could be on a hard drive on this computer...
I have all the latest drivers.
And windows/ nero 9 can't use my dvd drive to burn files.
Some info about my system: AMD X4 630 CPU. MSI KA780G (AMD 780G chipset) mobo. I have 2 sata hdds, non raid mode. The DVD drive is IDE. 4gb ram ddr2 ram. windows 7 64 bit.
I have a staples relay flash drive on my dell latitude E-6500 I have down loaded info on it and when I try to recover the info i get no message or icon to tell me it is working I bought it 2 months ago could you tell me what the steps are to use it?
Downloaded MP3 Rocket from Cnet but requires a flash player 11. Downloaded it but kept getting a mesage: "A newer version already installed" which is not true. Tried to install an older version but Adobe won't let me install it as it says there is a new version of it.By the way, I had Adobe Flash Player before and it worked!
I just purchased a new USB 256 GB flash drive to transfer documents from my desktop to the flash drive after the process completed I rebooted the computer when I opened my computer the flash drive was showing invalid characters when I opened a flash drive document they also had invalid characters labeled to them and I get the following error " The filename, directory name, or volume label syntax is incorrect."
I unfortunately forgot my windows 7 password of my netbook. However, I was able to find this bootable iso image that removes and windows password. it works great when burnt on a cd and booted from bios but as u know netbooks dun have cd drives. so my qeustion is is there a way to burn the iso image to a usb flash drive from which i can boot from it?
I tried to install Malwarebytes Anti-Malware on a flash drive to be able to run it on another computer but I get an error message. It appears that the data file containing the list of possible infections was installed on my C: drive. Is it possible to run this program on another computer from a flash drive? The error I receive is 'Run time error 13...Type mismatch'.
How do I download a file from a flashdrive to Windows 7? I did this once before with no problem, but for some reason was unable to correctly do it today.
Is there a way I can partition my USB flash drive without any third party tools? And, is there any way I can use an autorun.inf file in Windows 7? It works fine in XP and Vista but what about windows 7? I have a batch file on it where it will run silently and take a users documents and transfer the files to the USB.
If I plug my flash drive into my PC using Windows XP, it works fine.No problems.But when I plug it into my laptop, using Windows 7 it will not load it.It says newhardware detected, installing new hardware, Hardware installation failed.If I go Device Manager, It is listed under Unknown Devices.I have tried to uninstall all the USB Root Hubs, Restart the computer, in-order for it to auto re-install with the USB in / out of the computer. But it still fails.
about my a4tech pocket usb when i plugged it to my toshiba satellite e1802 it read as generic usb but when i plugged my usb flash drive it doesnt read by my a4tech pocket usb hub.
I know that this question is not associated with this topic but i need help.Ive typed in following command in command prompt bootsect /nt60 and my flash drive is not readable any more...is there any command to reverse mentioned command?I was trying to make bootable usb drive and now i cant access my usb flash anymore and i had some important files on that flash.
I have never needed to do this before, so I have no knowledge on the subject. I have a user who will be taking data home once a week, so I want to encrypt or at least password-protect her flash drive. It will contain regular, typical Office documents.Now, the tricky part is, she has a Dell PC running Windows 7 Pro in the office, and a Macbook laptop at home (not running any version of Windows). Does something exist, especially free, that will allow me protect her flash drive, and make it accessible to her on either computer?I need to do this for now, temporarily. I'm trying to convince my CEO that DropBox and others are just as safe and roughly the same process....but for now, I have to make the flash drive work.
I installed the Chrome OS IMG file on my flash drive and tried to boot from it, but it turns out my flash drive is now un-recognizable. I tried assigning a different drive letter in computer management, but it doesn't show up there. Sometimes it will show up and Windows will say that I need to format it, but the format always fails.Other flash drives are recognized by my computer. I am using a Lexar Jump Drive, but I'm not sure what model it is.
explicitly creating bad sectors in a flash drive. Is making bad sectors possible by repeadly disconnecting flash drive during file write process? How can a flash drive develop bad sectors in its memory ?
Have a Sandisk 32 GB USB Flash Drive that I use for selective storage of certain files.If I purchase a Sandisk 64 GB to make a complete backup will I have to configure each one every time I swop usage.Why I ask this is that when I tried to introduce the new Sandisk to my laptop it could not be recognised as my computer was still configured to my old Verbatim 4 GB USB.
I have a 8 GB USB Flash Drive which shows up as "Disk 1" in Disk Management but never comes "Online". I tried changing the drive letter and double-clicking in Explorer. But it says "Please insert a disk into Remove Disk (I". When I try to format, it says "There is no disk in drive I:. Please insert a disk and try again."I tried HP USB Disk Storage Format Tool but it says "There is no media in the specified device."
I have had 1000 issues, but i'm going to try and narrow it down. it seems like everytime I try to fix a computer, nothing ever just does what it is supposed to.At the moment I created a boot drive out of my flash drive with windows 7. I set it to boot first on my bios and it loads but hangs up on the first background screen after the windows logo and nothing happens.This info may help. I have two hard drives plugged in (IDE). the master is the one I want to do a clean install of windows. The slave drive already has windows and if I boot from it I can get to the desktop, but the problem is when I try to run the install from it and the computer restarts after the second step in the install for the main HD, it doesn't try to continue the install. Ive been working on this for a week.
booting through USB and it's quite hard to explain but at the moment what I need to know for succeeding with the installation is, is it ok to unplug the USB flash drive after the first restart during the installation? My friend just told me that after it is done expanding the files and reaches 100% and does it's first restart, I can unplug the USB and it will continue it's job as all the files are saved on the HDD now.
I want to have a Windows 7 installation that can be booted from a hard disk in a USB caddy or a USB flash drive / SHDC card. So I am installing to a USB connected drive.
I have created a bootable USB flash drive with the Windows 7 install DVD contents on it, so I am in a position to install to the Netbook hosting the USB hard disk. I have also (for reference) created a VHD on a different Windows 7 machine and set it up to boot from that, on the internal HDD.
The Windows 7 installer will not install directly to a partition on my external HDD, because it is connected by USB or Firewire (err message "Windows cannot be installed to this disk"). I can't "just ignore" the warning, as suggested by some, as the Next button is inoperative.
If I create a virtual hard disk (VHD) on a partition on the external HDD I am again warned by the Installer that it can't be installed to the VHD as the "computer's hardware may not support booting to this disk". If I ignore the warning and press Next (only works for the VHD option) I am told "Setup was unable to create a new system partition....See the setup log files for more information"
I can at that stage use the Installer tools to Format the VHD etc.
So I'm stuck - where do I find the installer log files and how can I move forward to get a bootable installation on a USB connected drive ?
im having problems installing from my flash drive, everything seems to work fine up untill the point where windows gathers the information. It tells me "A required CD/DVD drive device driver is missing. If you have a driver floppy disk, CD, DVD or USB flash drive, please insert now."
Original Installation Disc which the PC is currently running (Vista x64 OEM) Windows 7 Technet Disc Fresh Ubuntu 9.1 (for testing purposes, also failed to boot)
I've tried: multiple discs each with a fresh download and burned .iso changing boot priority going through the Boot Menu to select the USB-FDD or CD-ROM options
But the computer boots right through each of the medias.
I can see that my USB and DVD-rom drive are both lighting up.. during before the screen launches to the big Windows Vista logo screen.
I can get a 5 gig mkv file to save to a 16 gig flash drive. It says there is not enough room. I have formatted the flash and it has 16 gig available. how can I get the movie to save to the flash drive?
I have a desktop running Windows Vista Home Premium and I connect to it via the built in vpn client with Windows 7 Home Premium. I can access shared files a folders but, I have it set up where I can access flash drives and CD drives over VPN. Just tonight this has stopped working. I have all the right permissions set up and it still says network resource not accessible. This morining, I did not log on to the server I just started it up. Could me not able to access shared flash drives and CD drives because I am not logged in on the server end? I will try to logon later tonight when I go back to the server.
I am looking for a good External HD, but most reviews indicate that they do not last too long and have other problems. I am proficient with a flash drive. I want to make a system image on an external drive, but a limitation of Windows 7 System Image is that you cannot put it on a flash.
If I download Acronis or another similar appl. would I be able to make an image on a flash drive?
My school laptop seems to be bringing baddies with my school flash drive. I've installed MSE on my school laptop and I run Kaspersky at home. Kaspersky seems to be removing the threats but every time I plug my USB into my school laptop and plug it back into my PC, it brings back unwanted guests.
MSE has detected 5 threats and removed them although I'm not so sure because. well, I'm still getting threats! (School computer)
Anyways, to the point. What's a good security application that I can install onto my flash drive so that this doesn't happen again?
Trojan Program Trojan-GameThief.Win32.Magania.caje
Trojan Program Trojan-GameThief.Win32.Magania.cptt
