I'm running WIN 7 on my home pc and transferred some files via a Flash Drive to a laptop running XP Pro to go on a trip. Upon my return I update my home pc with the data from laptop/FD; I've done this with no problem many times. Upon my return this time my home pc will not recognize the FD. I've updated the driver, checked Disk Management, etc all to no avail. The FD isn't recognized and neither is a second FD I tried. They both work on the laptop.
I've had my partitions over several drives set for many months. Suddenly on boot this morning, one of the partitions isn't recognized by Windows (7 64-bit). My partition software (EaseUS Partition Manager Pro) does "see" it and shows the correct division of used and unused space. This is an NTFS partition with 11.86 GB capacity and 2.50 GB used. The status is None and the type is logical.The error message box title is "Location is not available". The message is:H: is not accessible.The file or directory is corrupted and unreadable.I've had no activity in this partition for several days. The partitions on either side are fine (fingers crossed they stay that way!). They same the same characteristics (although obviously different capacities) as the missing partition.
I have a terabyte external, WD Element I think. I have never had an issues before but today I plug it in (to play Diablo III) and it is not being recognized. At all. It's not in Disk Management, I can't find it anywhere. Suggestions or reasons this might be happening out of no where??
I know, should have a backup, I was actually about to create a backup when the flash drive failed on me unfortunately. My newest backup is from about 5 days ago, so I'd prefer to be able to restore the current files.
I moved the drive over to another computer and tried to save a file but when I checked again the file was gone, like it never saved at all. Subsequently, after removing and plugging it back in the computer did not detect the drive (or see it in disc management). It does show up as a generic USB drive in the device manager, but there are no properties for it.
When I add it to a computer, it still adds drivers for it, but then nothing happens after that. It may also be a hardware problem, since the drive fell on the ground pretty hard a while back, but seemed to be working fine. There isn't an easy way to open it up and check.
I also tried using a few data recovery programs, but they couldn't detect the drive either.
I installed the Chrome OS IMG file on my flash drive and tried to boot from it, but it turns out my flash drive is now un-recognizable. I tried assigning a different drive letter in computer management, but it doesn't show up there. Sometimes it will show up and Windows will say that I need to format it, but the format always fails.Other flash drives are recognized by my computer. I am using a Lexar Jump Drive, but I'm not sure what model it is.
I have an HP laptop which I recently upgraded from Windows XP Pro to Windows 7.
The flash drive (Lexar Firelfy 2GB) I was using on the XP OS can no longer be read under the Windows 7 OS. Information are stored in it (I am able to access it with computers other than mine), but my computer does not see them.
I have also tried different flash drives with the same results. Under disk management, my computer detects the flash drive but is unable to read it.
I've created the ISO file and moved it to the 4g drive using the AWESOME guide found here. However, the BIOS doesn't seem to recognize that the device is present. I've done some research and found that some usb drives aren't compatible with the BIOS? I made usb storage the only available boot option and nothing showed up.
However when I look at the drive while in Vista through my computer->G: It shows up as a windows system. I've also seen somewhere about enabling "Legacy usb"? I didn't find anything like that. Should I just got buy another flash drive and try again?
I just got this new computer, running 64-bit Windows 7 Home Premium. Everything was working fine at first, but then it automatically updated some things. Now, Flash doesn't work online anymore, in any browser. The content starts to load, then the browser freezes, and I have to force quit it.
I have the most recent version of Flash Player, and I can still play .swf files I make myself, so I don't know what to do anymore.
I'm fairly sure that this isn't an isolated problem, as a friend of mine is experiencing the same thing.
In a possibly related problem, .avi and other video files on my hard drive no longer play, nor do music files.
I doubt my specs are needed, since this is almost certainly a software problem, but I'm running on a Dell Studio, with a 2GHz dual core processor and with 4Gb of RAM.
so earlier in the week, flash decided to take a nosedive. no flash based websites will open, and Internet won't fully load videos like it used to (i have fios, and good up/download speeds). i've tried uninstalling and reinstalling 3 times, then once more but with flash version 10.2.
i'm unable to go to a system restore point because none of the points go back far enough. i thought it may have been my anti-virus, but even disabling that hasn't fixed it. is there anything else i can do? i'm prepared to toss the computer and call it quits.
since last week ive been having a adobe flashplayer problem . I need to do you tube videos but now I cant get any videos everytime i try and get a video it tells me i must have adobe flashplayer 9 or better installed on my computer !!! Ive downloaded flashplayer 11.3 like 40 times and it still does not work . Its like flash-player is not recognized on my computer no more even though it is downloaded and installed.
I have tried multiple fixes and still cannot connect any flash drive or external drive to any usb port on my computer without the dreaded "Usb not recognized" error. My mouse and keyboard are both usb and have worked fine though. I have unplugged the power cord from my psu for a few minutes. I have booted into safe mode. I have deleted the infcache.1 file. I have check my Bios settings (and have latest bios update). I have completely removed all the usb devices in device manager and rebooted which reinstalled everything. I have booted the computer up with a flash drive already in a usb port. I have gone into Drive Manager to see if anything is recognized without a drive letter. I have even applied the hotfix from here - [URL]. Nothing seems to work, yet all of these devices work fine on my netbook running Windows XP.
When I originally installed Windows 7 everything was working fine. I would say it roughly stopped working a month or two ago. I don't constantly use flash drives or my externals so I could be a little off on the time frame (why I didn't do a system restore). I first noticed the problem when I plugged in my Tmobile G1 phone to transfer files and it wasn't recognized. My phone would still charge off of the usb port, but I couldn't mount and browse the 4 gig sd card in my phone. It was working before because I have files on my phone that I transferred from my computer after the Windows 7 install. I started testing out my known, working flash drives as well as my usb powered 2.5" external drive and they too come up unrecognized on all usb ports (front and back).
My specs: AMD X2 5000+ BE Gigabyte GA-M55plus-S3G mobo G.Skill PI Black 4GB ram (2x2 - DDR2 800) 2 Western Digital Sata drives Nvidia 9800 GTX+ video card 450 Watt PSU (don't remember brand right now, but good amp rating on 12v for video card). Windows 7 Ultimate x64
The only drivers I am using for the system that are not the default Windows 7 drivers are for my video card and onboard audio. Onboard audio is the only Windows 7 driver provided on the Gigabyte website for my motherboard. What shoild I do, check or double check or should I start considering formatting and a reinstall of Windows 7 (which I have been trying to avoid)?
How can you copy one flash drive to another flash drive,on the same computer?
Tech Support Guy System Info Utility version 1.0.0.2 OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit Processor: AMD Athlon(tm) II X4 630 Processor, AMD64 Family 16 Model 5 Stepping 2 Processor Count: 4 RAM: 3839 Mb Graphics Card: ATI Radeon HD 4200, 256 Mb Hard Drives: C: Total - 702932 MB, Free - 657555 MB; D: Total - 12368 MB, Free - 1523 MB; Motherboard: FOXCONN, 2AB1 Antivirus: Norton 360, Updated and Enabled
What would cause a CD drive to be unable to read a CD it used be able to. Its DVD. Its driver working but may not be newest and the CD won't read shows it being half full but can't get to files how ever it reads other CDs fine. For sure it read just fine before dunno went Web site no new CD drivers. Is there difference between windows versions?
I upgraded from windows vista home premium to windows 7 ultimate. Now my tsstcorp ts-t632a cd/dvdw device no longer works. I uninstalled the device and drivers then restarted my computer. That did not work.
Microsoft installed some Windows 7 updates recenly and now my CD/DVD drive isn't listed as a Drive in the " Computer" window. I can play and burn cd's but it doesn't list it as a drive until I insert media.I'm on a HP laptop runing WINDOWS 7 64BIT .
Now I can no longer access my C drive, Get a message that the administrator (me) has banned me!
At the same time, I started gettin a message that my antivirus key is not valid.
Antivirus no longer works. (Avast). Also at about the same time my email programme (Thunderbird) started telling me that it could not download any more messages as there was insufficient room. Even after deleting several messages, the same fault continues. It looks like scrap W7 and reinstall, unless anyone has a better idea.
Before I even go further: yes, the "hide empty drives" has been unchecked)I had to reinstall my machine and I was able to to see the drive letters for the internal flash card reader. However I think something might have gone wrong when I give my external HDD a drive letter that was held by one of the flash card reader).I wrote "I think" because I am not really sure since I never wanted to use the internal card reader till today so I never noticed there was an issue. Anyway, the internal card reader does not show up even when I insert a card in the reader. Basically nothing happens. I have uninstalled the "USB Mass storage device" and it gets installed without any issue but the problem is still there: I can't see the reader. the INTERNAL flash card reader has a USB slot and when I insert a EXTERNAL flash drive, the EXTERNAL flash drive shows up.
I'm not a newbie when it comes to PCs either, I build my own and repair/troubleshoot others.
For some reason, my computer stopped reading DVDs in the drive. CDs load fine and I can burn to them. I checked the hardware properties and somehow Windows has decided to install a CDROM driver to the device, which is why I believe DVDs are no longer being read. I've tried going through and uninstalling the driver and getting rid of the registry keys assosicated in order for the correct driver to be installed, but Windows keeps installing incorrect ones.This just happened a few days ago, tried restoring Windows to a week ago and same problem exists. Less than a month ago I used it to install Diablo 3 so I know it works fine.
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
I'm having a bit of a problem with my DVD drives not being recognized. In a prior post, one of the fellows on this stream (Randy) solved the problem I'm having by suggesting that I edit the Upper and Lower Filters in the Registry. Unfortunately, I've lost this information. This time, I'll put it in a Jump Drive and lock in a safe!
Why are SAN drives recognized as local drive while NAS drives aren't?I knew that SAN uses block level transfer to transfer data while NAS uses file level transfer. Does this has anything to do with why SAN drives and NAS drives are recognized differently by the computer?
My DVD drive no longer works on my Asus N81VP-D1. If I connect my laptop hard drive to another computer and then install windows 7 to the harddrive using that computer and then put the harddrive back in my laptop, will it work?
