I know this does not necessarily pertain to Windows installation, but I did not know where else to place this thread. I know it is possible to burn isos to a thumb drive, but is there a way to put a boot loader on a thumb drive so I can have many images on separate partitions? For example, I want to partition my 32GB thumb drive into 700MB partitions, so that I can have Clonezilla live on one, GParted on another, and maybe the Windows 7 repair disk on another. Is this possible?
I had 2 windows 7 operating systems installed on my PC.One of them was getting slow so I decided install a new one over it.I installed the new OS over the old one's partition.Everything was completed perfectly.After some time, I decided to switch back to my other(old)OS.But instead of loading windows,it straightaway went to startup repair!One of my other partitions is protected with bitlocker.The startup repair asked for that long recovery key!I entered it and it continued to repair the OS.I checked the log file and it describes the problem as "Bootmanager failed to find OS loader" and the follwing repair was done: "Boot configuration data repair".I clicked th finish button and the rebooted the OS.But the same process occurs again and again.
I'm making a bootable thumb drive with all the best recovery and testing tools I can think of. Problem is I cant think of any other tools to put on it.
So far I have Hiren's boot cd, ubcd, ubcd4win, XP install disk image (dunno if the xp works yet), clonezilla, ubuntu, and orphcrack.
Anyone else have any ideas on other disks I should put on there or favorite tools?
I have imaged my neighbours Netbook with Macrium Reflect. Since it has no DVD burner, I want to create a bootable Macrium (Linux) recovery media on a thumb drive. Not sure how to proceed.
I had to use my thumb drive to upload files to a Mac, so I reformatted the drive to FAT32. Now I'm trying to get it back to NTFS so I can use again on my Win 7 machine, but the drive is not even showing up in My Computer.
The Drive shows in Device Manager and in Disk Management, but offers me no option to format.
This isn't specifically Windows 7, but I hope I have more possibilities with Windows 7. My thumb drive, which I hate to have to throw away, has become write-protected. It's a 16 GB thumb drive, so nothing to toss easily. It has no physical switch on it. I read about all sorts of solutions, like low-level format or registry editing. Nothing works. I always come back to square one: Can't format because of write-protection. Registry doesn't do a thing. I also found out that there is a virus on it. Maybe it caused the problem. However, the virus program can't remove it, because of the write-protection or because it is a 'non-local disk'. Vicious circles...
I have a thumb drive that i formatted on my new laptop that has Windows XP. ANd i am trying to copies files from my old laptop and desktop that are using Windows. I can add files to my thumb drive on my Windows 7 laptop but when i try and use the thumb drive on any computer that has Windows XP is says the drive needs to be formatted and when i click format (on the windows XP computer) it says can't that i dont have permission. How can i format that drive so that i can use it on both operating systems?
I just recently bought a new motherboard (old one died), and didn't realize that it had no IDE port on it for easy Windows 7 re-installation (my only available dvd drive is still IDE). After trying to find a friend with one, I ended up trying to make a bootable thumb drive using the Windows 7 bootable USB drive utility and my father's computer, and every single time I've tried to do it, it gives an error right at the end about bootsect.exe saying it isn't bootable.
Asus P5QL-VM, Intel Core 2 Duo q9300, 4gb (2x2gb) ram, seagate SATA hard drive of some sort, GEForce 9800GTX+ gpu.
I installed 7 on my Dell laptop that has no CD-ROM drive. I created a partition (D and set it to Active, installed from that partition, doing a quick format over Vista (C.
All was fine and dandy, but I was getting some boot option, I'm assuming because the Active drive had the install files on it. No problem, I'll set the C: partition to Active.
Reboot, should go away right? Wrong. "Bootmgr is missing."
No problem, there has to be a way to fix this. I'll put the CD in and recover... Or not!
What I have is a 2 gig USB thumbdrive, is there anyway to fix this problem with that? If not, what are my options.
Using the factory Dell restore to get Vista back won't work, I bought the laptop secondhand and they screwed that up.
have a HP Pavillion DV6-2010sa laptop thats running windows 7.
No picture display when i turn on the laptop, just caps lock and num lock LEDs flash twice. I looked this up and it means corrupt BIOS....
Now in order to fix this i need to flash my BIOS using a USB thumb drive ( pressing and holding Windows Key + B on start-up) The file provided by HP only extracts into a WinFLash.exe, so i used winRAR to extract the 3635F13.FD file from WinFlash.exe.
I understand i need rename the .FD file my question is what do i have to name the 3635F13.FD file in order to get the thumb drive to flash the BIOS.
I have Windows 7 installed and up until recently I could read and write files from my hard disk to my usb thumb drive. Now after some updates were downloaded and applied (automatically so I am not sure what was installed), when I insert my drive into the usb slot, the Bitlocker Drive Encryption window pops up and I have two choices. Encrypt this drive to allow write access or don't encrypt this drive but it will be read only. I checked Control Panel -> Bitlocker and it says its off my for C drive and my usb thumb drive. So i'm not sure why its wanting to encrypt it. How do I get rid of this Bitlocker and gain write access to my usb drive?
I'm Trying to make a Bootable flash drive for Windows 7 64 bit. I know the link to download it but I copy the files to the Thumb drive now I get bootmrg I don't think I got all of the images downloaded right.
I had windows 7 originally Installed on my Laptop. I then Installed Ubuntu 9.10 Desktop version, and it installed the grub boot loader
(All on 1 single HD, each OS is on its own partition.)
This boot loader was used to dual boot between windows and Linux. However now the grub boot loader is broken, and I was talking to some people how knew about Ubuntu, and they said to just delete its partition, which I did.
Now when I boot from my HD I just get a broken grub boot loader, and can’t get even get into my Win 7. Now I just want to get ride of this Grub boot loader, and get Windows 7 MBR back. I have booted from my windows 7 recovery disc, and have done:
Startup Repair – It found no problems, but HD still only boots to broken grub boot loader
System Restore – I restored to before I was having this problem, but HD still only boots to broken grub boot loader
I am trying to figure out what commands to enter in the command prompt to repair the MBR, or maybe just view what partitions are in my computer, and then completely delete the one with Grub on it.
Windows Boot Loader Identifier:{default} Device:partition = D: Path:Windowssystem32winload.exe Description:Windows 7 Inherit:{bootsequencesettings] Recoveryenabled: yes Osdevice:partition = D: Systemroot: windows Nx:OptIn
According to this everything looks fine, The C partition is that 100MB system reserved boot partition that windows 7 creates, and the D partition is a 100GB partition that I created on the HardDrive that windows 7 was installed to. I don’t understand why the windows boot loader will not boot, somehow the grub boot loader is still over riding it, even though I deleted the partition that ubuntu was installed on, and where the grub should have been installed as well.
From the command prompt, if I use diskpart, there are only 2 partitions, a 100MB one, and a 100GB one. Those are C and D respectively, so I am not sure how the grub is still loading unless it installed itself to a NTFS partition if that is even possible.
Does anyone know what commands I can try to repair or recreate the MBR so that windows 7 will load, or maybe commands to delete this Grub boot loader?
I have two harddrives in my computer, one is 750GB and just has a bunch of different files from my older computer (documents, movies, etc, but no traces operating system). My other harddrive is 1TB and has Windows 7 on it (which I'm typing from now). For some reason (I think after I installed a Windows Update), when I restart the computer it says, "Bootmgr is missing. Press CTR+ALT+DEL to restart". Before, this had never happened, so I figured out that I had to manually go into my HP boot menu (by pressing ESC when I first start the computer) and then choose my 1TB harddrive to boot into Windows 7. This is kind of a pain.
is there a way to have windows put the boot loader on a drive of your choosing? I have 2 HDDs in my computer and from what I can tell windows put its boot loader on my other drive. is there a way (other then disconnecting the other one) to get windows to put the boot loader on the other drive like change priority in the BIOs?
I recently installed Windows 7 on two different hard drives in the same computer.When installing one I disconnected the other drive, and when the first one was installed, I disconnected the first drive and installed it on the other drive.
Now only the second Windows is loaded each time I turn on the computer and boot loader screen where you can choose the OS does not show up.What went wrong and is there any possibility to restore it?
I've routinely dual booted Linux and Windows over the years, but yesterday I hit a bit of a snag. I had Windows 7 and Vista both installed on a single hard disk. Since it had been awhile since I had booted Vista I decided to delete the partition and install Linux there. What I did not realize is that when I installed 7 it left the BCD on the Vista partition. So, when I installed Linux I effectively blew away my Windows boot loader.I've tried a hundred things at this point without much luck, including the "nuclear holocaust" / manual rebuild of BCD from:Recovering the Vista Bootloader from the DVD - NeoSmart Technologies WikiA few questions / thoughts from my google searches:* Is there anything needed in /boot other than the BCD?
* I am wondering if the "active" / "boot" partition flag is causing me trouble. hen I was trying to rebuild the BCD manually using bcdedit i was getting errors that the partition was not flagged active. I tried to use diskpart to flag it active but it said that the partition type was not valid for the active flag? I was able to set it active using the Linux gparted partition manager, but I can't understand why diskpart would not flag it.* Is it possible to have your oot on a different partition then Windows? The recovery console is mapping C: to my "applications" drive and D: to my "system" drive which contains Windows. I was wondering if I need to put oot on C: instead of D:
I have an HP pavilion dv4-1555dx laptop that I was trying to install Linux mint 10 gnome on a PNY 8GB flash drive, I forgot to have Linux install grub to the flash drive, so it ended up installing grub to the HDD, now I need to reinstall the windows 7 boot loader but HP didn't send a windows 7 boot disk with the system (OEM windows 7) so I can't jut boot the cd and use the recovery counsel unless there is somewhere online that I can get an iso from, or is there another way?
This is quite a long story, So let me get straight to the point.On my Dell Optiplex 360 Computer (Windows 7-Ultimate) I partitioned the hard drive to make space for another windows installation. I then installed Windows Vista Ultimate on it.All of that went successfully but after a while it became useless for me and my computer.
Is it possible to install Windows 7 (to a different hard drive/partition) by mounting the iso, but then not have it install a boot loader? Obviously you'd have to be using a pre-existing OS to be mounting the iso file, but I can't seem to think of a way for it to not install a boot loader.
I know it's possible to install and then afterwards remove all the boot loader stuff, but it's just a hassle to boot into the DVDs and do all the rebuildbcd or fixmbr stuff.
Also I am aware I could just burn the iso to DVD and install it from that in order to not get a bootloader, but I'd like to know if it's at all possible via mounting the iso.
I have a laptop which until yesterday was dual boot (Windows 7 and SLES11). However I decided I would rather just use Windows with VMWare for any Linux needs. To do this I deleted the Linux partitions (OS, workspace, swap) from within Windows and used this extra space to add to my workspace partition on Windows and create a new partition for my VM's to sit.I got all this working very nicely and was happy with it until I rebooted to machine to see GRUB was still set to be the boot loader which is unable to do anything with no Linux partitions.What I do have is the Windows 7 Reinstallation DVD that came with the laptop however the DVD drive of my laptop is broken. I am currently writing this with a MacBook Pro (Mountain Lion) and so the only solution I can think of is using media oN DVD, and burning this to a bootable USB using the Mac and then setting up BIOS on the 'broken' laptop to boot from DVD. However I am not sure how to create a 'bootable' USB.
1) Can I use my Windows 7 reinstallation disc to recover Windows boot manager 2) If so can I do this via USB? 3) How could I make my USB 'bootable' using my Macbook Pro 4) What are the steps for recovering boot manager from the installation media 5) What is the more elegant way to 'delete' Linux partitions and ensure Windows Boot Manager works (I may also run into this problem with a workstation I set up in same way yesterday but have yet to reboot0
My laptop apparently is having a hard time booting. I start it up, it will display the blinking cursor and stay like that forever, i hard shut it down and the BIOS will search for new hardware (as its suppose to) and then the blinking cursor will appear for around a minute before booting up! this is really annoying and ive already Reset the BIOS to default and Reinstalled windows (deleted all Partitions and made one)
my HP 550 laptop is failing to boot. upon attempting to do startup repair, it gives me a root cause as "boot manager failed to find os loader".and booting from safe mode is not present despite hitting f8 at boot.
All I did was open a video strored locally with no connection to the internet. Shut down computer properly. I go to start it up and start up repair kick in. I have let the thing run on startup repair over night and a total of 12 straight hours. It reboots once, maybe even twice. Then it just sit a says attempting repairs. I just did a hard shut done. I was able to pull the data off using Uburba (not sure of the spelling). The USB 2.0 is not recognized in start up repair command prompt. I had a image saved to a CD. I can't get past the username password. The one I had wrote down does not work. System restore fails because I can't it doesn't have a .DDL file or it says something. If I could get the USB 2.0 to work I have an external that has a couple of images that would be better than re-installing. I tried moving the image into the computer then using the image restore, but I learned that doesn't work because it somehow tracks were it wrote the image to. This is way I need the usb 2.0 to pull the image from my external HD.What is the default password of HomeGroupUser$?
I have a Windows 7 Pro x64 which has been running for a many months without any issues.Three days ago I restarted the machine and Windows 7 didn't start anymore. I have spent a lot of time investigating it and could not find anything wrong with the boot loader or the file system where the OS is.So the boot loader works, I have also replaced it just in case but nothing changed. I can go into the boot loader menu and chose the Windows 7 entry but then the black screen which says "Starting Windows" comes and nothing else happens.Note that the computer doesn't hang, it simply gets stuck at some point and doesn't do anything else. The HDD LED stays on from this point forward and that is it, if I press ctrl+alt+del it restarts and if it were completely frozen it wouldn't.
This Windows 7 runs on a pair of drives in RADI1 so it cannot be a problem with the drives. I have run checks just to be sure and couldn't find anything, no file system issues or bad blocks.The raid controller is not reporting any issues with the drives.I have booted with the windows install cd and tried to repair it many times but the auto repair says it could not repair it, other times it tells me that no issue was found.The boot manager is working fine, I have replaced it just in case using bootrec /fixmbr and /fixboot and also bootsect /nt60 all.I have checked for corrupt files with sfc and no files were corrupt, at least no critical system files.I have manually replaced the winload.exe file but this didn't help either.The problem seems to be at the stage where the boot manager passes control to winload.exe.
I have a PC with 2 hard drives- the first hard drive has a single partition and windows 7 64-bit is installed on this hard disk.Now I wish to install CentOS 6 on the first partition of the second hard disk.I have created the dvd for installing Cent OS also.How do I configure the boot loader in Windows? If I install Linux on second hard disk, will this overwrite the Windows Boot Loader? How do I create a dual boot system so that the windows boot loader correctly shows linux as an option, so that I am able to load either Windows 7 (existing) or Linux(on second hard disk- not yet installed)
