Unable To Make Thumb Drive Bootable?
Dec 8, 2010
I just recently bought a new motherboard (old one died), and didn't realize that it had no IDE port on it for easy Windows 7 re-installation (my only available dvd drive is still IDE). After trying to find a friend with one, I ended up trying to make a bootable thumb drive using the Windows 7 bootable USB drive utility and my father's computer, and every single time I've tried to do it, it gives an error right at the end about bootsect.exe saying it isn't bootable.
Asus P5QL-VM, Intel Core 2 Duo q9300, 4gb (2x2gb) ram, seagate SATA hard drive of some sort, GEForce 9800GTX+ gpu.
View 9 Replies
ADVERTISEMENT
Dec 19, 2009
I'm making a bootable thumb drive with all the best recovery and testing tools I can think of. Problem is I cant think of any other tools to put on it.
So far I have Hiren's boot cd, ubcd, ubcd4win, XP install disk image (dunno if the xp works yet), clonezilla, ubuntu, and orphcrack.
Anyone else have any ideas on other disks I should put on there or favorite tools?
View 7 Replies
View Related
Feb 7, 2012
I'm Trying to make a Bootable flash drive for Windows 7 64 bit. I know the link to download it but I copy the files to the Thumb drive now I get bootmrg I don't think I got all of the images downloaded right.
View 12 Replies
View Related
Jun 3, 2011
I 've Windows 7 basically extracted files. I have tired to put it on a dvd and burn it, burning process was fairly easy I thought I've a bootable DVD now.Then I tired it in a desktop computer and set to boot from CD.To my disappointment it did not boot from CD. But when when normally I put it in DVD and and run from Desktop it works pretty well but then there is another problem it has no options as when the normally windows DVD has when they are bootable. So installation works it simply replaced the older files with new one and a folder is created for older files.What i want is bootable DVD so I can use it to format and Install fresh copy.
View 5 Replies
View Related
Mar 1, 2011
How to make pen drive as bootable.I tried with several open source applications but I am getting target device not found.my system USB and pendrive both are working condition.
View 5 Replies
View Related
Mar 30, 2011
I have a computer with two drives, both of them have a licensed version of Windows 7 installed. My problem is that the boot dirve is installed on the large hard drive (1 TB) and I need be able to boot off of my small ssd drive so that I can replace the 1 TB with a 3 TB. how can i make ssd drive bootable with out re-installing windows and redoing all of my settings, and programs.
View 4 Replies
View Related
Dec 14, 2009
I had XP and Vista installed on my primary SATA hard drive (on SATA0 channel). There was no space for another operating system, so I added a secondary hard drive (to SATA2 channel) and installed Windows 7 to it. It worked perfectly. After a few weeks my old primary hard drive suddenly died, and the computer doesn't boot anymore. So I put the remaining live hard drive to SATA0 channel, and bought another new SATA drive and put it to SATA2 channel. Now I need to add boot files to my drive, because both operating system and data files are there, I just need to let the computer start.
So I have one good healthy SATA drive, Windows 7 installed on it, but without boot files, because that other (now dead) drive was used to start up the computer. I though that Windows 7 Installation DVD will help, but it doesn't. When I try to use its repair disk feature, it fails to find any installed Windows, so it says there's nothing to boot to, nothing to reapir. If I use the command line utility from the same DVD, I can see both my C: and D: partitions are there, with all files, I can see all my directories, I can see Windows folder, Program Files folder etc. But what does it need to boot?
I also tried "upgrade" from W7 Installation DVD, but it says that I should run this option from inside Windows. Since I cannot start the Windows, this option isn't for me. When I tried a new fresh installation, I got a warning that all my current data will be overwritten, and that also isn't option I am searching for.
View 11 Replies
View Related
Dec 29, 2011
Learn how to make any bootable CD or DVD bootable on a USB flash drive. This process allows you to quickly and easily create bootable USB flash drive copies of important software, such as Microsoft Windows, firmware update utilities, and various Linux operating system distributions. Most CDs and DVDs that are bootable in a native environment can be made bootable on USB with the Universal USB Installer utility by Pen Drive Linux.See: Universal USB Installer - Easy as 1 2 3 | USB Pen Drive Linux
View 1 Replies
View Related
Aug 5, 2011
I am having 500gb usb hardisk in which i had create a partition of 10gb and i want to create that partition bootable with windows 7 pls tellme what to do there are many ways given to make harddisk bootable but its for complete harddisk not for selected partition.
View 3 Replies
View Related
Nov 28, 2012
I just received my new Corsair 16GB Survivor Stealth USB Flashdrive. Is it possible to make the USB drive bootable...yet still able to store regular files (word docs, pictures, mp3's etc.) without compromising the ability to make it boot if needed? If so what is the best way to go about making this happen? (I already know how to make a flash drive a dedicated bootable).
View 8 Replies
View Related
Oct 8, 2010
When I installed windows 7 64 Ultimate I set up a multiboot machine from within Vista, I installed windows 7 and Ubuntu on separate hard drives (one HD per OS). The boot menu is on the Vista drive. All drives are SATA.I soon formatted the Ubuntu drive and removed the option to boot to it. My Vista OS no longer boots, it just hangs whilst loading so I want to format that drive now and just use Windows 7. However, I have tried removing all the hard drives apart from the windows 7 one and I find that this will not boot.i would like to make the windows 7 drive bootable but I am not sure how to do this.I have tried removing all the HD's apart from the none booting windows 7 HD and putting in the Windows 7 disk and carrying out the option to repair start up (not sure exactly what this was called) several times but this does not make any difference. It just prompts me to restart the machine and boots again from the DVD.
View 7 Replies
View Related
Apr 22, 2012
I have been having many problems with my old hardcover and after finding out it was the source of all my problems I decided to go out and buy myself a new hard drive today,It is a 3.5" internal sata 2
7200 rpm
32 mb cache
From intenso
My motherboard has two sata slots, I managed to install windows on my new hard drive through the files saved onto my other hard rive. Windows is successfully installed on my hard rive but I have to keep the old one in to boot from, is there a way to create a partition on my new Hardrive to boot from so I can unplug my old hard drive as it takes up the slot where my DVD drive should go.
View 2 Replies
View Related
Dec 29, 2012
when I install window 8...so the existing window 7 files moved into D drive(which was in c drive previously). so window 8 files are in C drive. so when I starting my computer only window 8 is booting....window 7 is not booting....bcoz D drive not bootable. so what can do I do? I want solution so that both windows work..
View 1 Replies
View Related
Feb 1, 2013
what is the name of the software used for making pen drive bootable for windows7
View 1 Replies
View Related
Nov 28, 2011
I'm trying to make an external hard drive bootable without losing any data that's already stored on it, if possible and use it to install Windows 7 on my computer, I'm currently running XP.
View 9 Replies
View Related
Nov 25, 2012
Desktop runs Windows 7 (64bit) Laptop runs XP (32 bit)I have programs on my laptop that I want to be able to run on my desktop. Programs that I no longer have install information/CD keys for. I have no trouble making partitions. A 'clean' install of XP onto the partition allows me to dual boot flawlessly using EasyBCD.What i *want* to do is be able to 'clone' my XP drive to the partition to be able to run those programs.
View 3 Replies
View Related
Jan 11, 2013
I currently have a disc copy of windows 7 and I am currently running it as my main OS as well. I was wondering just in case my computer decides to have a few issues is there anyway I can make a data partition to store windows 7 or put it on a flash drive so that in the incident of a hardware failure I would be able to go into my bios and boot the recovery partition or boot it from a flash drive allowing me to reinstall the OS.
View 3 Replies
View Related
Jul 18, 2009
I have two HD drives, one SATA and one IDE, plus one SATA CD/DVD drive. Firstly I used to have XP on the SATA and Windows 7 on the IDE, but the IDE drive is smaller and slower and I wanted to essentially swap them over. The boot devices are set in the bios as CD/DVD first, SATA second, IDE third.
So I have installed XP first on the IDE and now Windows 7 on the SATA, but after I removed the Windows 7 DVD and restarted it is refusing to boot saying NO BOOT DEVICE DETECTED, INSERT SYSTEM DISK. Now if I place the Windows 7 dvd in the drive and ignore the PRESS ANY KEY TO BOOT FROM CD/DVD...., it will book fine.
This will surely fustrate non-technical users no end and some may not even think to try and replace the OS disk and try again. I think I know what has happened, but more importantly how do I go and fix it to just boot without needing a damn boot disk everytime!?
View 9 Replies
View Related
Feb 21, 2012
I an unable to make my floppy drive work on my new computer with windows 7 64 bit. I know there is a card made in England named Catweasel that is supposed to do the job, but they are hard to come by.
View 9 Replies
View Related
Jun 12, 2012
I have imaged my neighbours Netbook with Macrium Reflect. Since it has no DVD burner, I want to create a bootable Macrium (Linux) recovery media on a thumb drive. Not sure how to proceed.
View 6 Replies
View Related
Jan 10, 2013
In just 2 folders (of many) on my thumb drive, I have checksum folders/files. Why are they there? Is there something I should do?
View 5 Replies
View Related
Dec 1, 2009
I have Win 7 64, and when I insert a thumb drive in any of my front ports, I get a BSOD, system service exception, stop 03b.
4GB ram, Nvidia 650 using 15.51 drivers.
I attached my minidump file.
View 9 Replies
View Related
Aug 30, 2012
I had to use my thumb drive to upload files to a Mac, so I reformatted the drive to FAT32. Now I'm trying to get it back to NTFS so I can use again on my Win 7 machine, but the drive is not even showing up in My Computer.
The Drive shows in Device Manager and in Disk Management, but offers me no option to format.
View 4 Replies
View Related
May 3, 2011
This isn't specifically Windows 7, but I hope I have more possibilities with Windows 7. My thumb drive, which I hate to have to throw away, has become write-protected. It's a 16 GB thumb drive, so nothing to toss easily. It has no physical switch on it. I read about all sorts of solutions, like low-level format or registry editing. Nothing works. I always come back to square one: Can't format because of write-protection. Registry doesn't do a thing. I also found out that there is a virus on it. Maybe it caused the problem. However, the virus program can't remove it, because of the write-protection or because it is a 'non-local disk'. Vicious circles...
View 3 Replies
View Related
May 20, 2011
I have a thumb drive that i formatted on my new laptop that has Windows XP. ANd i am trying to copies files from my old laptop and desktop that are using Windows. I can add files to my thumb drive on my Windows 7 laptop but when i try and use the thumb drive on any computer that has Windows XP is says the drive needs to be formatted and when i click format (on the windows XP computer) it says can't that i dont have permission. How can i format that drive so that i can use it on both operating systems?
View 2 Replies
View Related
Aug 27, 2009
I installed 7 on my Dell laptop that has no CD-ROM drive. I created a partition (D and set it to Active, installed from that partition, doing a quick format over Vista (C.
All was fine and dandy, but I was getting some boot option, I'm assuming because the Active drive had the install files on it. No problem, I'll set the C: partition to Active.
Reboot, should go away right? Wrong. "Bootmgr is missing."
No problem, there has to be a way to fix this. I'll put the CD in and recover... Or not!
What I have is a 2 gig USB thumbdrive, is there anyway to fix this problem with that? If not, what are my options.
Using the factory Dell restore to get Vista back won't work, I bought the laptop secondhand and they screwed that up.
View 1 Replies
View Related
Oct 9, 2009
I know this does not necessarily pertain to Windows installation, but I did not know where else to place this thread. I know it is possible to burn isos to a thumb drive, but is there a way to put a boot loader on a thumb drive so I can have many images on separate partitions? For example, I want to partition my 32GB thumb drive into 700MB partitions, so that I can have Clonezilla live on one, GParted on another, and maybe the Windows 7 repair disk on another. Is this possible?
View 4 Replies
View Related
Mar 25, 2012
have a HP Pavillion DV6-2010sa laptop thats running windows 7.
No picture display when i turn on the laptop, just caps lock and num lock LEDs flash twice. I looked this up and it means corrupt BIOS....
Now in order to fix this i need to flash my BIOS using a USB thumb drive ( pressing and holding Windows Key + B on start-up) The file provided by HP only extracts into a WinFLash.exe, so i used winRAR to extract the 3635F13.FD file from WinFlash.exe.
I understand i need rename the .FD file my question is what do i have to name the 3635F13.FD file in order to get the thumb drive to flash the BIOS.
View 3 Replies
View Related
Jul 16, 2009
Someone want to explain how the hell you make a bootable ISO from these leaked builds?
Everything I try is FUBAR.
Edit: Okay..nevermind..I Frankenstein it and figured it out finally..I just copied the install files onto my USB flash drive and rebooted and set to boot to USB drive.
No need for an ISO
Edit 2: ...Okay..I give up..I get an error during install saying Windows can't install the required files. The file may be corrupt or missing. bla bla
Anyone else getting this with the 32bit leaked copy that just came out?
View 3 Replies
View Related
Dec 3, 2009
I have a new hdd and I got a dvd with Windows 7.
Unfortunately it isnt bootable, so how can I make it bootable?
I only have a laptop(with dvd burner) an empty dvd and the Windows 7 dvd.
So how can I make it bootable?
Rip the files off, and then?
View 3 Replies
View Related
Mar 12, 2009
Maybe it's a stupid question,but I can't figure it out how...?
At this moment,I have Win 7 buil 7000 32 bit installed,and I want install x64 version,so I have downloaded Windows 7 build 7048 x64,but it's not a bootable ISO file.
I managed to make an ISO,but have never did and don't know how to make a bootable ISO file,I have already tried several programs(PowerISO,MagicDisc,ImgBurn,Nero 8),but every time I burn an image on disc,it doesn't work.
If there is someone who is willling to explain me correct way step by step,I'll be really greatful.
View 9 Replies
View Related
