I am having 500gb usb hardisk in which i had create a partition of 10gb and i want to create that partition bootable with windows 7 pls tellme what to do there are many ways given to make harddisk bootable but its for complete harddisk not for selected partition.
View 3 RepliesI had XP and Vista installed on my primary SATA hard drive (on SATA0 channel). There was no space for another operating system, so I added a secondary hard drive (to SATA2 channel) and installed Windows 7 to it. It worked perfectly. After a few weeks my old primary hard drive suddenly died, and the computer doesn't boot anymore. So I put the remaining live hard drive to SATA0 channel, and bought another new SATA drive and put it to SATA2 channel. Now I need to add boot files to my drive, because both operating system and data files are there, I just need to let the computer start.
So I have one good healthy SATA drive, Windows 7 installed on it, but without boot files, because that other (now dead) drive was used to start up the computer. I though that Windows 7 Installation DVD will help, but it doesn't. When I try to use its repair disk feature, it fails to find any installed Windows, so it says there's nothing to boot to, nothing to reapir. If I use the command line utility from the same DVD, I can see both my C: and D: partitions are there, with all files, I can see all my directories, I can see Windows folder, Program Files folder etc. But what does it need to boot?
I also tried "upgrade" from W7 Installation DVD, but it says that I should run this option from inside Windows. Since I cannot start the Windows, this option isn't for me. When I tried a new fresh installation, I got a warning that all my current data will be overwritten, and that also isn't option I am searching for.
I have been having many problems with my old hardcover and after finding out it was the source of all my problems I decided to go out and buy myself a new hard drive today,It is a 3.5" internal sata 2
7200 rpm
32 mb cache
From intenso
My motherboard has two sata slots, I managed to install windows on my new hard drive through the files saved onto my other hard rive. Windows is successfully installed on my hard rive but I have to keep the old one in to boot from, is there a way to create a partition on my new Hardrive to boot from so I can unplug my old hard drive as it takes up the slot where my DVD drive should go.
when I install window 8...so the existing window 7 files moved into D drive(which was in c drive previously). so window 8 files are in C drive. so when I starting my computer only window 8 is booting....window 7 is not booting....bcoz D drive not bootable. so what can do I do? I want solution so that both windows work..
View 1 Replies View RelatedI'm trying to make an external hard drive bootable without losing any data that's already stored on it, if possible and use it to install Windows 7 on my computer, I'm currently running XP.
View 9 Replies View RelatedHow to make pen drive as bootable.I tried with several open source applications but I am getting target device not found.my system USB and pendrive both are working condition.
View 5 Replies View RelatedI have a computer with two drives, both of them have a licensed version of Windows 7 installed. My problem is that the boot dirve is installed on the large hard drive (1 TB) and I need be able to boot off of my small ssd drive so that I can replace the 1 TB with a 3 TB. how can i make ssd drive bootable with out re-installing windows and redoing all of my settings, and programs.
View 4 Replies View RelatedLearn how to make any bootable CD or DVD bootable on a USB flash drive. This process allows you to quickly and easily create bootable USB flash drive copies of important software, such as Microsoft Windows, firmware update utilities, and various Linux operating system distributions. Most CDs and DVDs that are bootable in a native environment can be made bootable on USB with the Universal USB Installer utility by Pen Drive Linux.See: Universal USB Installer - Easy as 1 2 3 | USB Pen Drive Linux
View 1 Replies View RelatedI just received my new Corsair 16GB Survivor Stealth USB Flashdrive. Is it possible to make the USB drive bootable...yet still able to store regular files (word docs, pictures, mp3's etc.) without compromising the ability to make it boot if needed? If so what is the best way to go about making this happen? (I already know how to make a flash drive a dedicated bootable).
View 8 Replies View RelatedWhen I installed windows 7 64 Ultimate I set up a multiboot machine from within Vista, I installed windows 7 and Ubuntu on separate hard drives (one HD per OS). The boot menu is on the Vista drive. All drives are SATA.I soon formatted the Ubuntu drive and removed the option to boot to it. My Vista OS no longer boots, it just hangs whilst loading so I want to format that drive now and just use Windows 7. However, I have tried removing all the hard drives apart from the windows 7 one and I find that this will not boot.i would like to make the windows 7 drive bootable but I am not sure how to do this.I have tried removing all the HD's apart from the none booting windows 7 HD and putting in the Windows 7 disk and carrying out the option to repair start up (not sure exactly what this was called) several times but this does not make any difference. It just prompts me to restart the machine and boots again from the DVD.
View 7 Replies View Relatedwhat is the name of the software used for making pen drive bootable for windows7
View 1 Replies View RelatedI just recently bought a new motherboard (old one died), and didn't realize that it had no IDE port on it for easy Windows 7 re-installation (my only available dvd drive is still IDE). After trying to find a friend with one, I ended up trying to make a bootable thumb drive using the Windows 7 bootable USB drive utility and my father's computer, and every single time I've tried to do it, it gives an error right at the end about bootsect.exe saying it isn't bootable.
Asus P5QL-VM, Intel Core 2 Duo q9300, 4gb (2x2gb) ram, seagate SATA hard drive of some sort, GEForce 9800GTX+ gpu.
Desktop runs Windows 7 (64bit) Laptop runs XP (32 bit)I have programs on my laptop that I want to be able to run on my desktop. Programs that I no longer have install information/CD keys for. I have no trouble making partitions. A 'clean' install of XP onto the partition allows me to dual boot flawlessly using EasyBCD.What i *want* to do is be able to 'clone' my XP drive to the partition to be able to run those programs.
View 3 Replies View RelatedI currently have a disc copy of windows 7 and I am currently running it as my main OS as well. I was wondering just in case my computer decides to have a few issues is there anyway I can make a data partition to store windows 7 or put it on a flash drive so that in the incident of a hardware failure I would be able to go into my bios and boot the recovery partition or boot it from a flash drive allowing me to reinstall the OS.
View 3 Replies View RelatedI have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies View RelatedI'm running into issues recently with a number of Windows 7 pc's where the hard disk will no longer be accessible. If I use startup repair, it will fail and not detect the disk or not even reach the recovery options screen. If I plug the drive into another windows pc, it will want to initialize and format.I can plug the disk into a mac or linux and am able to read / write to the disk as normal. The only way i've overcome this so far is to reformat the drive.
View 3 Replies View RelatedI am about to buy a new internal hard drive for my laptop, and want to do a clean install of Windows 7. My laptop came with XP, but I did an online upgrade to Windows 7 (student edition) Professional.
How can I create a bootable Windows 7 disk so when I put my new hard drive in my computer, it will setup Windows 7 for me? I also don't have any old XP disks because my laptop didn't come with any.
I looked on my C: Drive but couldnt find any .iso files or anything like that?
I'm trying to install 7 on a VHD using the command prompt. Now it does work but the problem is that it installs 7 Basic when I do it like this. I have Professional. Now I can use the Anytime Upgrade and use my product key to get Pro activated but because I'm in basic, 7 won't work on the VHD at boot. When it asks for my product key upon first time setup, it doesn't work since it's looking for a Basic product key.
Is there a way to get 7 Pro on the VHD through the CMD?
i want to create another partition, which can be bootable. so that i will be able to boot from ubuntu as well as windows 7....
View 3 Replies View Relatedhow to create windows image bootable partion in my hard drive
View 1 Replies View RelatedMy system is Dell Inspiron 17R SE (7720), 1 TB Hard Disk 5400 rpm + 32 GB mSATA, 8 GB RAM, 3rd Gen i7. I was trying to make a bootable USB flash drive for windows 7 from Windows 7 Home Premium Reinstall disk that came with my Dell laptop, using the WinToFlash utility. But in starting the process, the PC froze, all applications (even explorer.exe) stopped, and Alt+Ctrl+Del refused to work. I turned the laptop off and back on, where it refused to even show the OS list and showed a DRMK message instead with a command prompt C:> as:
Loading DRMK V8.00...
DRMK Version 8.00
COMMAND.COM Build 37 - Jul 28, 2008
DRMK KERNEL Build 15 - Aug 8, 2008
Copyright (c) 2006-2008 Dell Inc. All rights reserved.
C:>
I tried booting from Windows 7 reinstall DVD but none of the repair options worked. I tried reinstall and repair options but my Hard Drive did not show up. It rather asked to Load Drivers for the Hard Disk. However, it did show any of the USB drives I connected to it, along with an X: drive, which must be the recovery drive for Dell's factory restore. I tried looking for Hard Disk drivers in that but no luck.
Then I downloaded from another PC a USB utility for Seagate Hard Drives from Dell website that makes a bootable USB. I ran that utility and it showed all the test passed (But there was no firmware update during the tests). Another thing I tried was using list disk command on command prompt in Windows Repair, but It did not show any drives, not even the X: drive. It only showed the USB drives I attached to it, or the DVD drive in list volume command.
I cannot boot to windows, I cannot install new windows, I cannot repair the windows and I cannot even factory restore my laptop. The hard drive shows up in BIOS, but not in Windows Boot or Windows Installation. Is there any way I can get my Hard Disk back without losing data? I have two partitions of that drive. I don't care about formatting C: Drive (Windows) but I wanna preserve E: Drive (the one filled with personal data but no programs).
How to full format my laptop hard drive. I have already Re install windows 7 in E: drive. Previously I have win-7 in C: drive after encounter some problems, Re-install new Windows 7 but that time I didn't format the hard disk that's why its install in drive E. Now when start the up of the lap top both selection are coming will start with old win or new win-7...and having some trouble with my windows 7 that's why I want to full format the hard dive without bootable disk and install new win-7.
View 2 Replies View RelatedOk I have the Windows 7 Ultimate beta, and was wondering how do I make a copy of my hard drive so that I can transfer all of my stuff to my new Windows 7? I have 2 hard drives, and I want to be able to play games on my new version of Windows 7 like Call of Duty without having to re-install them or re-download them. I know I can't use the easy tansfer wizard on this version of windows, so what do I do?
View 7 Replies View Relatedi have a hp laptop and it in the shop. tech has advised that window is not loaded on the hard drive and he wants be to pay for a hard drive which he thinks will correct the problem if not he saying its the motherboard wit have a diagnostice code 0601 blanking cursor
View 1 Replies View RelatedI've had a Windows 7 PC that's motherboard recently broke so I have been trying to use the hard drive with another PC. The PC I'm trying to put it into has all Windows 7 compatible parts. I get to the starting windows screen and it restarts the computer and gives me the option to Launch Startup repair. I launched startup repair and it says that it cannot fix the problems automatically. I can hookup the hard drive as a secondary hard drive and access all of the files on it but I cannot make it primary it just wont boot. The computer that the hard drive originally came from did not include a recovery/install CD.
View 1 Replies View Relatedlock a hard drive partition and make it read-only?
View 1 Replies View Relatedeverytime I try to access my documents on word, winword.exe wants to make changes to my hard drive.
View 1 Replies View RelatedSomeone want to explain how the hell you make a bootable ISO from these leaked builds?
Everything I try is FUBAR.
Edit: Okay..nevermind..I Frankenstein it and figured it out finally..I just copied the install files onto my USB flash drive and rebooted and set to boot to USB drive.
No need for an ISO
Edit 2: ...Okay..I give up..I get an error during install saying Windows can't install the required files. The file may be corrupt or missing. bla bla
Anyone else getting this with the 32bit leaked copy that just came out?
I have a new hdd and I got a dvd with Windows 7.
Unfortunately it isnt bootable, so how can I make it bootable?
I only have a laptop(with dvd burner) an empty dvd and the Windows 7 dvd.
So how can I make it bootable?
Rip the files off, and then?
Maybe it's a stupid question,but I can't figure it out how...?
At this moment,I have Win 7 buil 7000 32 bit installed,and I want install x64 version,so I have downloaded Windows 7 build 7048 x64,but it's not a bootable ISO file.
I managed to make an ISO,but have never did and don't know how to make a bootable ISO file,I have already tried several programs(PowerISO,MagicDisc,ImgBurn,Nero 8),but every time I burn an image on disc,it doesn't work.
If there is someone who is willling to explain me correct way step by step,I'll be really greatful.
I downloaded OFFICIAL Windows 7, but there is no ISO file so how do I make it bootable? There is a setup.exe file but since i have VISTA 32 bit i cannot clean install to W7 64 . So what do I do?
View 5 Replies View Related