Lock A Hard Drive Partition And Make It Read-only?

Jul 10, 2011

lock a hard drive partition and make it read-only?

View 1 Replies


ADVERTISEMENT

Hard Disk / Failed To Lock Drive

Dec 22, 2011

I am running windows 7 64 bit, on an eMachines lap top, I have purchased an external HDD and now I am trying to create a perfect copy of my system. I used DriveImage XML but it failed. I have used this program in the past with great success on a different computer running WindowsXP.The failure I get is "failed to lock drive". I've tried skipping the lock drive option and going straight to shadow copy; same problem.I can only assume the failure to lock drive is based on permissions and files being in use. So I think I need to attempt this without loading windows. Is there anyway of running a "free" drive cloning program from a DVD or USB Flash drive without booting into Windows?I would just bit torrent a win7 OS, install it on my external, and run the program from their, but I don't want to have to resort to law breaking, and I have never run linux.

Also I tried using a "backup" feature on Paragon Partition Manager, it did "backup" the system, but it didn't clone the drive. All the backup files are written in directories such as "C:/archive/" and thus I assume there is no way of booting into a system written that way. I assume it's like windows system restore, and what I need is a bootable image of my primary drive.Oh and I should clarify, that it's not my external drive that fails to lock; the external HDD has been formatted, partitioned, and can read and write data just fine, and has way more than enough room to copy the HDD in my lap top.Also, the HDD on my lap top has 1 primary partition, with two logical partitions. I have no idea what the logical partitions are for and if that could be causing the problem.

View 8 Replies View Related

Folder Lock On External Hard Drive?

Jul 17, 2011

I am using folder lock 6.0 to lock folder on my two laptops. I have a WD External hard drive. I want to lock (password protect) some folders on the portable/external harddrive. I don't want aany encryption because I may forgot the password and may not be able to recover data. I also don't want to lock complete partition. I just want to make it hidden/password protected from casual users. Is it possible using folder lock? It has a portability feature but it requires to transfer all data to a locker. I have a very large amount of data which I want to lock (~100GB). Folder lock has a feature to lock any folder on hard drive but it dosn't work when it is external/portable hard drive.

View 9 Replies View Related

Partition / Drive Intermittently Read Only?

Feb 18, 2011

I have a pair of WD 500GB drives in Raid0 array with the resulting >900Gb partitioned such :

C: Priamry 100Gb - Windows 7 64bit
D: Primary 80 GB - Windows 7 32bit
E: Primary 40GB - Windows 7 32bit
R: Secondary Logical - 355GB - Data
Z: Secondary Logical - 355GB - Data

Using DualBootPro to boot between the various OS Both the Windows 7 32 bit installations give me no problems whatsoever, however, intermitantly when booting into the Windows 7 64 installation sometimes the R drive will appear as read only, or the Z drive will appear as read only or they are both OK.This is more an inconvenience than a major disassater, as a reboot normally resolves the issue. This appears to be cmpletely random, as it does not happen specifically after a boot into either of the Windows 7 32 installtions, but can occur even after a previous successful boot of the Windows 7 64 installation.

View 6 Replies View Related

Make Internal Hard Drive Into And External Hard Drive?

Mar 30, 2012

I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable

View 3 Replies View Related

Lots Of BSOD / Lock Ups Or Hard Drive Not Being Detected By BIOS

Apr 13, 2012

Lots of BSOD, lock ups, hard drive not being detected by bios, is it failing? Let me start by saying my PC is custom built, most parts are only a year old. The oldest parts are the harddrive (about 5 years) and the soundcard (about 7 years). I have never had major problems until now (a year after building it).

It all started with a blue screen.
KERNEL_DATA_INPAGE_ERROR
Reboot windows and it seems to start up fine, gets to the desktop and locks up.

Reboot windows and I get another blue screen.
BAD_SYSTEM_CONFIG_INFO

I try to start windows from the last good configuration. Error. Registry file failure. Cannot load hive file. I try booting from the windows cd and running a chkdsk. Hard drive starts making a buzzing sound. It gets to step 3 of 5 and stops. Failed to transfer logged messages. Status 50. Now the bios rarely even "sees" the drive. When I can get it to boot and see it, any attempt at diagnostics and repairs produces errors, locks up, or fails.

Is this a bad hard drive? I would hate to spend the money on a new one only to find it is a bad mobo or virus. How can I diagnose this? If it is a bad drive I would like to save what juice is left in it and try to recover a few files before it dies. Most of the important data has been backed up but I would like to try and get a few game save files if I can. But its not a disaster if the drive data is not recoverable.

View 3 Replies View Related

External Hard Disk Is Lock And Lock Recovery Key Lost

Nov 7, 2011

my external hard disk is lock and lock recovery key lost?

View 1 Replies View Related

Created A 20gb Partition On External Hard Drive / No Longer Require Partition

May 9, 2011

I created a 20gb partition on my external hard drive and no longer require the partition. It is currently unallocated space so I want to format it into NFTS. Using computer management the partition was selected and and I went through the steps to format but i keep on getting an error message saying there is not enough space on the disk to complete this operation.

View 1 Replies View Related

Cannot Partition Hard Drive Due To Large Number Of Partition

Mar 30, 2011

i recently installed windows 7.. it had only 2 drives c: and d: .. i need to partition d: drive into 3 partitions. is it possible?

View 4 Replies View Related

Hard Drive Locked As Read-Only?

Sep 11, 2010

Ive had this problem once before. I turned my PC on Yesterday, and my WD 500GB Hard drive (Number 3) was not recognised. Then I did a reboot, and the drive showed up again, HOWEVER, The drive has the Read Only flag in DiskPart and using the attrib disk clear readonly commands with the correct disk selected does not work. DiskPart just moans that It cant clear the attribute.

I doubt its a Driver Issue or a Hardware issue as It was working fine. All the tests in Ubuntu 10.04 (my second os) come up good and I can write to it, So Windows 7 has done something, Not sure what.

View 6 Replies View Related

Computer Won't Read Hard Drive

Sep 3, 2011

So i build a newcomputer yesterday. I decided to use my old SATA hard drive from my computer, it has my OS, and other files on it. I get everything put in, but when i start the computer it says "no hard disk is detected".

I enter the bios menu, and i notice it recognizes that it is in there, as well as my disk drive.

How come it wont let me load my hard drive, and it doesnt detect it when i start it up.. but BIOS sees that its there?

View 3 Replies View Related

Windows 7 Can't Read Hard Drive

Jan 2, 2012

I have a new HP desktop running Windows7. I have an external hard drive that i was using with Windows XP. The external hard drive is a Western Digital. My new computer recognizes the drive but can not read it. Is there a simple solution. Tech support from Western Digital tells me I have to format the drive. I dont want to lose my files.

View 1 Replies View Related

Why Can't New Computer Read Hard Drive

Feb 12, 2012

why can't my new computer read my harddrive

View 2 Replies View Related

How To Get Pc To Read External Hard Drive

Feb 22, 2012

What can I do to get m PC to read my Seagate external harddrive. It has been formatted to fat 32 and mac

View 1 Replies View Related

Windows Recognizes Hard Drive, Cannot Read

Dec 30, 2011

Ubuntu kills comp, grub reset screen only shows I partitioned my external harddrive via ubuntu to run ubuntu. Back on windows, my harddrive isn't read in my computer but it shows in device manager. How can i access this?

Additional info: Seagate 500 gb harddrive

View 5 Replies View Related

Make A Bootable Flash Drive And Data Partition For Windows 7?

Jan 11, 2013

I currently have a disc copy of windows 7 and I am currently running it as my main OS as well. I was wondering just in case my computer decides to have a few issues is there anyway I can make a data partition to store windows 7 or put it on a flash drive so that in the incident of a hardware failure I would be able to go into my bios and boot the recovery partition or boot it from a flash drive allowing me to reinstall the OS.

View 3 Replies View Related

1 TB Toshiba External Hard Drive Cannot Be Read By Windows

Jan 13, 2013

My 1 TB Toshiba external hard drive cannot be read by Windows. a error messgae appears sayng CD Rive E is either corupted or the disc is in an incompatible format.

View 1 Replies View Related

Laptop Does Not Read New External Hard Disk Drive Using USB Connection

Jul 10, 2012

My laptop does not read my new external hard disk drive using USB connection. The sign "Safely remove hardware and eject media" is there. But the icon of the hard drive doesn't appear in the "Computer".

View 1 Replies View Related

Disk Read Error Occurred (Hard Drive Not Faulty)

Dec 3, 2012

Computer is a Sony Vaio VGC-RC110G (not sure about motherboard). About 3 weeks ago computer starts refusing to boot giving errors that make me think the hard drive is bad. Computer will still occasionally boot after 5-10 tries. I bought a new hard drive and tried to create an image of the old drive onto the new using Clonezilla, the process gave a few errors. The computer flatly refused to boot from the new drive (gave disk read errors). However, when I could boot using the old drive, I could get in and explore the image of the new drive and the image copy process seemed to have worked okay.

As part of the disk image copy process, my new drive had 2 partitions and about 900 megs of free space. The two partitions were the main windows partition from the old drive and the recovery partition. I combined all partitions and formatted the new drive (using Gparted) because I thought that the disk image copy probably just recreated errors in the old drive onto the new. After the format, my computer then consistently refused to boot from either drive. (in the past I could boot to the old drive after a couple of tries). The error was usually "a disk read error occurred' or "BOOTMGR is missing."

Attempts to install windows using windows install DVD failed because computer couldn't write to the new hard drive. Both hard drives would usually appear in bios when I entered into it (I know at least one time where neither appeared in the bios), although sometimes computer would fail allow me to edit bios altogether. I attached the new hard drive to a different computer and installed a clean version of windows 7 Ultimate x86 to the new drive. The different computer boots just fine from the new hard drive. But when I move the new hard drive to back to the old computer I consistently now get "a disk read error occurred" error.

I don't believe it is a SATA cable issue because power to drive seems to be fine and I had to use the SATA cable from the old computer when hooking the drive up to the different and it worked fine. Also, Gparted recognizes the drive just fine and has no problems formatting partitions etc., so there is communication happening through the SATA cable and the power cable is powering adequately.TL;DR summary: New hard drive works fine with new computer, but old computer (when connected to same new hard drive) gives me a "disk read error occurred." Based on the evidence, I don't think it's a faulty drive issue. I'm also skeptical that it's a cable issue, but haven't 100% ruled out this possibility. What should I do next in terms of identifying the problem? I've currently exhausted my (admittedly limited) hardware troubleshooting .expertise.

View 1 Replies View Related

How To Make A Hard Drive Bootable

Dec 14, 2009

I had XP and Vista installed on my primary SATA hard drive (on SATA0 channel). There was no space for another operating system, so I added a secondary hard drive (to SATA2 channel) and installed Windows 7 to it. It worked perfectly. After a few weeks my old primary hard drive suddenly died, and the computer doesn't boot anymore. So I put the remaining live hard drive to SATA0 channel, and bought another new SATA drive and put it to SATA2 channel. Now I need to add boot files to my drive, because both operating system and data files are there, I just need to let the computer start.

So I have one good healthy SATA drive, Windows 7 installed on it, but without boot files, because that other (now dead) drive was used to start up the computer. I though that Windows 7 Installation DVD will help, but it doesn't. When I try to use its repair disk feature, it fails to find any installed Windows, so it says there's nothing to boot to, nothing to reapir. If I use the command line utility from the same DVD, I can see both my C: and D: partitions are there, with all files, I can see all my directories, I can see Windows folder, Program Files folder etc. But what does it need to boot?

I also tried "upgrade" from W7 Installation DVD, but it says that I should run this option from inside Windows. Since I cannot start the Windows, this option isn't for me. When I tried a new fresh installation, I got a warning that all my current data will be overwritten, and that also isn't option I am searching for.

View 11 Replies View Related

Make Usb Hard Drive Bootable

Aug 5, 2011

I am having 500gb usb hardisk in which i had create a partition of 10gb and i want to create that partition bootable with windows 7 pls tellme what to do there are many ways given to make harddisk bootable but its for complete harddisk not for selected partition.

View 3 Replies View Related

Make A Copy Of Hard Drive

Jan 1, 2010

Ok I have the Windows 7 Ultimate beta, and was wondering how do I make a copy of my hard drive so that I can transfer all of my stuff to my new Windows 7? I have 2 hard drives, and I want to be able to play games on my new version of Windows 7 like Call of Duty without having to re-install them or re-download them. I know I can't use the easy tansfer wizard on this version of windows, so what do I do?

View 7 Replies View Related

How To Make New Hard Drive Bootable

Apr 22, 2012

I have been having many problems with my old hardcover and after finding out it was the source of all my problems I decided to go out and buy myself a new hard drive today,It is a 3.5" internal sata 2

7200 rpm
32 mb cache
From intenso

My motherboard has two sata slots, I managed to install windows on my new hard drive through the files saved onto my other hard rive. Windows is successfully installed on my hard rive but I have to keep the old one in to boot from, is there a way to create a partition on my new Hardrive to boot from so I can unplug my old hard drive as it takes up the slot where my DVD drive should go.

View 2 Replies View Related

How To Make Hard Drive Bootable

Dec 29, 2012

when I install window 8...so the existing window 7 files moved into D drive(which was in c drive previously). so window 8 files are in C drive. so when I starting my computer only window 8 is booting....window 7 is not booting....bcoz D drive not bootable. so what can do I do? I want solution so that both windows work..

View 1 Replies View Related

Hard Drive Partition: Adding Free Space Back To C Drive?

Sep 7, 2012

I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive. I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.

There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked. Can someone explain how to do this, please? I'm not completely computer illiterate, but I'm not familiar with partitioning disks. It was just the one time with Ubuntu.

View 4 Replies View Related

Hard Drive Partition: Adding Free Space Back To C: Drive

Jan 15, 2013

I installed Ubuntu on my computer a few months ago and created another partition for it on my 1TB hard drive.

I didn't really care for Ubuntu so I decided to delete the partition it was on. That might have been a mistake. Well, now there's 87.68GB of free space on my hard disk that I can't use and I don't know how to add it back to my c: partition.

There was another post about this a couple years ago, but I don't understand the instructions and am not actually sure if it worked.

View 2 Replies View Related

Make An External Hard Drive Bootable?

Nov 28, 2011

I'm trying to make an external hard drive bootable without losing any data that's already stored on it, if possible and use it to install Windows 7 on my computer, I'm currently running XP.

View 9 Replies View Related

What Would Make Windows 7 Not Load On A Hard Drive

Aug 19, 2011

i have a hp laptop and it in the shop. tech has advised that window is not loaded on the hard drive and he wants be to pay for a hard drive which he thinks will correct the problem if not he saying its the motherboard wit have a diagnostice code 0601 blanking cursor

View 1 Replies View Related

Unable To Install Windows To Hitachi Hard Drive - Disk Read Error

Nov 11, 2012

Originally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.

View 2 Replies View Related

Windows 7 Hard Drive Won't Boot - Cannot Make It Primary

Apr 18, 2012

I've had a Windows 7 PC that's motherboard recently broke so I have been trying to use the hard drive with another PC. The PC I'm trying to put it into has all Windows 7 compatible parts. I get to the starting windows screen and it restarts the computer and gives me the option to Launch Startup repair. I launched startup repair and it says that it cannot fix the problems automatically. I can hookup the hard drive as a secondary hard drive and access all of the files on it but I cannot make it primary it just wont boot. The computer that the hard drive originally came from did not include a recovery/install CD.

View 1 Replies View Related

Access Documents On Word / Winword.exe Wants To Make Changes To Hard Drive

Mar 9, 2011

everytime I try to access my documents on word, winword.exe wants to make changes to my hard drive.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved