Ubuntu kills comp, grub reset screen only shows I partitioned my external harddrive via ubuntu to run ubuntu. Back on windows, my harddrive isn't read in my computer but it shows in device manager. How can i access this?
Additional info: Seagate 500 gb harddrive
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies View RelatedI have a new HP desktop running Windows7. I have an external hard drive that i was using with Windows XP. The external hard drive is a Western Digital. My new computer recognizes the drive but can not read it. Is there a simple solution. Tech support from Western Digital tells me I have to format the drive. I dont want to lose my files.
View 1 Replies View RelatedMy 1 TB Toshiba external hard drive cannot be read by Windows. a error messgae appears sayng CD Rive E is either corupted or the disc is in an incompatible format.
View 1 Replies View RelatedOriginally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.
View 2 Replies View RelatedIve had this problem once before. I turned my PC on Yesterday, and my WD 500GB Hard drive (Number 3) was not recognised. Then I did a reboot, and the drive showed up again, HOWEVER, The drive has the Read Only flag in DiskPart and using the attrib disk clear readonly commands with the correct disk selected does not work. DiskPart just moans that It cant clear the attribute.
I doubt its a Driver Issue or a Hardware issue as It was working fine. All the tests in Ubuntu 10.04 (my second os) come up good and I can write to it, So Windows 7 has done something, Not sure what.
So i build a newcomputer yesterday. I decided to use my old SATA hard drive from my computer, it has my OS, and other files on it. I get everything put in, but when i start the computer it says "no hard disk is detected".
I enter the bios menu, and i notice it recognizes that it is in there, as well as my disk drive.
How come it wont let me load my hard drive, and it doesnt detect it when i start it up.. but BIOS sees that its there?
why can't my new computer read my harddrive
View 2 Replies View RelatedWhat can I do to get m PC to read my Seagate external harddrive. It has been formatted to fat 32 and mac
View 1 Replies View Relatedlock a hard drive partition and make it read-only?
View 1 Replies View RelatedMy laptop does not read my new external hard disk drive using USB connection. The sign "Safely remove hardware and eject media" is there. But the icon of the hard drive doesn't appear in the "Computer".
View 1 Replies View RelatedComputer is a Sony Vaio VGC-RC110G (not sure about motherboard). About 3 weeks ago computer starts refusing to boot giving errors that make me think the hard drive is bad. Computer will still occasionally boot after 5-10 tries. I bought a new hard drive and tried to create an image of the old drive onto the new using Clonezilla, the process gave a few errors. The computer flatly refused to boot from the new drive (gave disk read errors). However, when I could boot using the old drive, I could get in and explore the image of the new drive and the image copy process seemed to have worked okay.
As part of the disk image copy process, my new drive had 2 partitions and about 900 megs of free space. The two partitions were the main windows partition from the old drive and the recovery partition. I combined all partitions and formatted the new drive (using Gparted) because I thought that the disk image copy probably just recreated errors in the old drive onto the new. After the format, my computer then consistently refused to boot from either drive. (in the past I could boot to the old drive after a couple of tries). The error was usually "a disk read error occurred' or "BOOTMGR is missing."
Attempts to install windows using windows install DVD failed because computer couldn't write to the new hard drive. Both hard drives would usually appear in bios when I entered into it (I know at least one time where neither appeared in the bios), although sometimes computer would fail allow me to edit bios altogether. I attached the new hard drive to a different computer and installed a clean version of windows 7 Ultimate x86 to the new drive. The different computer boots just fine from the new hard drive. But when I move the new hard drive to back to the old computer I consistently now get "a disk read error occurred" error.
I don't believe it is a SATA cable issue because power to drive seems to be fine and I had to use the SATA cable from the old computer when hooking the drive up to the different and it worked fine. Also, Gparted recognizes the drive just fine and has no problems formatting partitions etc., so there is communication happening through the SATA cable and the power cable is powering adequately.TL;DR summary: New hard drive works fine with new computer, but old computer (when connected to same new hard drive) gives me a "disk read error occurred." Based on the evidence, I don't think it's a faulty drive issue. I'm also skeptical that it's a cable issue, but haven't 100% ruled out this possibility. What should I do next in terms of identifying the problem? I've currently exhausted my (admittedly limited) hardware troubleshooting .expertise.
My DVD drive stop recognizing disc inserted into it. Both DVD's and CD's
View 5 Replies View Relatedchange it to read and write mode, and also to remove write procted in it.
View 1 Replies View RelatedI have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies View RelatedTried several so called fixes but nothing has resolved the issue of not reading a blank cd or dvd and no recording tab in the cd drive properties in my Sony Vaio vpceb43fx running Windows 7 64-bit.
View 4 Replies View RelatedI have a weird problem with my laptop. my laptop is a dell latitude d630 with an intel core 2 duo T7300 cpu it is a dual core cpu
but since 2 days my computer runs slower. i didn't understand. using cpu-z i saw that my cpu only has ONE core.
i do not understand. can cores go bad separate?
So, I have a i7 2600K system with a solid state disk as the boot drive, and an older (c2008) Samsung Spinpoint F3 500GB drive as the data drive for programs (that I deem as not worthy of the quick load times). The hard drive has given me some errors over time, and I bought a hard disk to replace it (a Hitachi 1TB). The issue I'm having is that the fact that Windows 7 puts a small (100MB) partition on the F3, and for some reason, even though I'm running Acronis 2012, it doesn't seem to be able to clone the F3 over to the Hitachi. I've also tried Drive XML, and for my 2 hour wait, I only managed to acquire a boot error. Thankfully, I've not done anything rash to destroy the data on the F3, but given the fact that I've seen corrupted files in Steam from that drive, I'm not will to trust it long term with my data. I really need to get the data onto that Hitachi, though... Anyone have any advice for upgrading the HDD in a SSD/HDD system? I don't really feel like it should be so hard, especially if I've bought Acronis True Image, but maybe they haven't designed their product to handle this scenario quite yet?
View 9 Replies View RelatedMy Windows XP reads a 1GB Kingston Flash Drive but my Windows 7 doesn't.
I have scanned it and formatted the Flash Dive but nothing works.
i used to burn my movies on *** dvd but when i tried to do so as usual this message appears"windows can't read the disc in drive e .make sure that the disc in *** format that windows can recognize.if not formate the disc first" there is no format option and i used to use this type of dvds and it usually works and when i but *** dvd that i was burn before, windows read it easy but not the blank dvds of the same type.
View 2 Replies View RelatedThe computer I'm using is older (3+ years) and has frustrated me a few times, most notably in the past 2 months.
That said, this is a new problem. My second (DVI) monitor is detected by Windows but doesn't display anything. In both the display settings and the NVIDIA control panel, I can see a second (Impression) monitor, but it's blank and I can't get it to show anything. In fact, the monitor doesn't seem to recognize that it's connected, because the orange "power but no input" light is on rather than the green "power and input" light.
This is a Windows 7 64-bit installation on a Dell Dimension E520.
I just installed Windows 7 Ultimate 64 bit OS. The BIOS sees both hard drives and the CD and DVD drive and the Windows Device Manager shows the extra hard drive and both optical drives. When I click the folder in the task bar (Libraries) I can only see "C" drive and no optical drives either. When I click on the CD drive I get the right menues for it, but it does not work at all. If I put a CD in the drive it locks up the system and I have to power off the computer before I can eject it.
System Info:
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Ultimate, Service Pack 1, 64 bit
[Code].....
I am running Windows 7 on a system I built myself about 18 months ago. I recently added 4Gigs of RAM to the existing 2Gigs.Occasionally I get an error message about being out of memory. It during one such episode that I discovered that only 4Gigs of RAM is actually being used.I've only know about this site for a week or so or I would have been able to give you more specific information
View 4 Replies View RelatedI have a problem with my radeon. After I install windows they don't recognizes my graphic card , they only recognizes VGA standard graphic card.
View 3 Replies View Relatedmy dvd drive wont read any disks, im running windows 7 64 bit, i have tried the options below but still no luck i have had a search on here and tried this to fix it:
- execute regedit
- search the key HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E965-E325-11CE-BFC1-08002BE10318}
- delete Upperfilter and lowerfilter entries.
- Reboot your system.
there was no upper-filter or lower filters to delete, i have also had a look in properties and it says the dvd drive is working fine,iv tried to uninstall it and restart still have the same problem?
I have 2 drives (connected one at a time to try and sort this issue) SONY AD-7260S and a LITE-ON
Now from upgarding to XP to 7 I had no issues until now... When inserting Disc (Blank or Data Files) the DVD Drive will hang and not ask what to do with the Disk and when I try to Burn the disc it will say cannot write to drive or just sit there doing nothing
Both these drives worked flawlessly with XP and only way to get the drive to recognise half the time with Windows 7 is to restart PC to either get it to show in Device Manager or press eject when booting to get the disk inside out.
Both drives are Sata and are only a few months old (not burned much and work exceeelnet on another xp machine)
I have a 1.5TB Seagate ext HD that is formatted as MS-DOS (FAT), this was formatted on my iMac. The Mac internal HD has completely crashed. I attached the ext HD to my Toshiba Satellite laptop, the ext HD does not show in the drive list. It does show in the device manager. It also shows as working properly in the properties menu I need files from this drive. How do I get my Windows 7 system to read the ext usb drive?
View 2 Replies View RelatedI have Windows 7 and no matter if I am using Chrome or Internet Explorer, the color of the text that appears is so faint that it almost blends in with the background. Instead of black text, the text is like a gray color. It is so profoundly irritating I cannot stand it! It isnt like this on all websites. For instance, as I am typing this post. The text color is black and does not blend in with the white background. Although, it could have better resolution.
View 1 Replies View RelatedI am trying to install Windows 7 onto my laptop as I want to do a clean install to wipe off everything and have windows freshly put on. My cd/dvd drive cannot read the disc. You can here the drive attempting to load up the disc but to know success. I have tried Microsoft Fix, does not work (however, it has in the past as well as booting from disc at startup-that too has worked in the past), I have tried booting from the cd/dvd drive on bootup, I have attempted to go into the registry and delete lowers installers I think its called (I didnt do this on previously installation attempts and I installed fine). I have all correct drivers according to my laptop, plus I've gone into the packard bell website to download the correct drivers and I have used windows update too in case I am missing anything. Nothing is working.
View 9 Replies View RelatedAfter the latest Win 7 updates on three of my computers, the CD drive does not read blank CDs. It gives an error message "Windows cannot read the disk in drive E:"etc, format the disk etc.I was always able to put a blank CD in the drive and see that it was blank or could copy files to drive. Now, it only gives me this message. I tried several different blank CDs. They work fine in my older XP computer.
View 2 Replies View RelatedI have a HP Touchsmart IQ500. Turning my computer PC on today, all I got was a blue HP invent screen with setup, boot menu, system recovery, and system diagnosis, and I could not get past it. I entered the BIOS and figured out that the hard drive was listed as "not installed." Pretty sure that is the main problem.I tried a system restore (with the Windows 7 install disc), but I guess the computer couldn't read the hard drive enough to enter safe mode (I tried restarting and F8ing several times). I put in an external hard drive, and the BIOS read it; however, windows does not allow you to partition an OS on a hard drive.
View 2 Replies View Related