Tried several so called fixes but nothing has resolved the issue of not reading a blank cd or dvd and no recording tab in the cd drive properties in my Sony Vaio vpceb43fx running Windows 7 64-bit.
View 4 Replieschange it to read and write mode, and also to remove write procted in it.
View 1 Replies View RelatedMy Windows XP reads a 1GB Kingston Flash Drive but my Windows 7 doesn't.
I have scanned it and formatted the Flash Dive but nothing works.
i used to burn my movies on *** dvd but when i tried to do so as usual this message appears"windows can't read the disc in drive e .make sure that the disc in *** format that windows can recognize.if not formate the disc first" there is no format option and i used to use this type of dvds and it usually works and when i but *** dvd that i was burn before, windows read it easy but not the blank dvds of the same type.
View 2 Replies View RelatedI have a new HP desktop running Windows7. I have an external hard drive that i was using with Windows XP. The external hard drive is a Western Digital. My new computer recognizes the drive but can not read it. Is there a simple solution. Tech support from Western Digital tells me I have to format the drive. I dont want to lose my files.
View 1 Replies View Relatedmy dvd drive wont read any disks, im running windows 7 64 bit, i have tried the options below but still no luck i have had a search on here and tried this to fix it:
- execute regedit
- search the key HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E965-E325-11CE-BFC1-08002BE10318}
- delete Upperfilter and lowerfilter entries.
- Reboot your system.
there was no upper-filter or lower filters to delete, i have also had a look in properties and it says the dvd drive is working fine,iv tried to uninstall it and restart still have the same problem?
I have 2 drives (connected one at a time to try and sort this issue) SONY AD-7260S and a LITE-ON
Now from upgarding to XP to 7 I had no issues until now... When inserting Disc (Blank or Data Files) the DVD Drive will hang and not ask what to do with the Disk and when I try to Burn the disc it will say cannot write to drive or just sit there doing nothing
Both these drives worked flawlessly with XP and only way to get the drive to recognise half the time with Windows 7 is to restart PC to either get it to show in Device Manager or press eject when booting to get the disk inside out.
Both drives are Sata and are only a few months old (not burned much and work exceeelnet on another xp machine)
Ubuntu kills comp, grub reset screen only shows I partitioned my external harddrive via ubuntu to run ubuntu. Back on windows, my harddrive isn't read in my computer but it shows in device manager. How can i access this?
Additional info: Seagate 500 gb harddrive
I have a 1.5TB Seagate ext HD that is formatted as MS-DOS (FAT), this was formatted on my iMac. The Mac internal HD has completely crashed. I attached the ext HD to my Toshiba Satellite laptop, the ext HD does not show in the drive list. It does show in the device manager. It also shows as working properly in the properties menu I need files from this drive. How do I get my Windows 7 system to read the ext usb drive?
View 2 Replies View RelatedI am trying to install Windows 7 onto my laptop as I want to do a clean install to wipe off everything and have windows freshly put on. My cd/dvd drive cannot read the disc. You can here the drive attempting to load up the disc but to know success. I have tried Microsoft Fix, does not work (however, it has in the past as well as booting from disc at startup-that too has worked in the past), I have tried booting from the cd/dvd drive on bootup, I have attempted to go into the registry and delete lowers installers I think its called (I didnt do this on previously installation attempts and I installed fine). I have all correct drivers according to my laptop, plus I've gone into the packard bell website to download the correct drivers and I have used windows update too in case I am missing anything. Nothing is working.
View 9 Replies View RelatedAfter the latest Win 7 updates on three of my computers, the CD drive does not read blank CDs. It gives an error message "Windows cannot read the disk in drive E:"etc, format the disk etc.I was always able to put a blank CD in the drive and see that it was blank or could copy files to drive. Now, it only gives me this message. I tried several different blank CDs. They work fine in my older XP computer.
View 2 Replies View RelatedMy 1 TB Toshiba external hard drive cannot be read by Windows. a error messgae appears sayng CD Rive E is either corupted or the disc is in an incompatible format.
View 1 Replies View RelatedI just purchased Windows 7 Home Premium to upgrade it from Windows Vista Home Premium, and when I popped in the disc, it does not show up! I tried a different disk, and yes it worked. I also tried putting the Windows 7 disk into my friends computer, and it showed up. I have tried many different things, and nothing works. I've tried re installing the driver, updating it, and several different fixing programs.
View 9 Replies View RelatedUpgraded from win xp to win pro 7 32 bit. I have two hitachi drives that I mirror using casper xp. Saved my old config with xp on drive H. Now, in windows 7, I can see drive H, but get error not accessible.
View 7 Replies View RelatedOriginally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.
View 2 Replies View RelatedMy Optiarc DVD RW AD-7203A drive refuses to recognize any sort of media I put within it. I am unsure of when this problem occured (because I rarely use the drive, which begs the question of how in the world can it stop working), but I do know that nothing I have tried has helped me.I've tried all of the following:Editing the registry to no avail because the "Lower Filters" key is not present, therefore the kb article is of no use.Uninstalling/reinstalling the drive Changing the Start key in the registry to "3" Formatting the entire machine and restoring to factory settings The thing is, whenever I enter the Device Manager to check on the drive, it keeps saying it's working perfectly/drivers are up-to-date/blah blah blah. I've tried searching everywhere but to no avail, and I may soon just take a hammer to it and be done with this crap.However, I am hoping that you mates can help me before rage takes over and I smash this thing to bits! Also, is it possible for a drive to be stuck in "burn mode" (as in it thinks it's always burning a cd/dvd)?
View 1 Replies View RelatedRecently my DVD burner does not see any DVDs on my computer that I built a couple of months ago. It does not see Movies, Games(that are DVD), Blank DVD-R or DVD-R that I have written information to. I have put in a few different CDs(Game, Audio and Data) and they do get recognized by the drive. My problems all started when I was writing to a Blank DVD. While it was burning, the burn process failed about midway through. After that happened, my problems with the drive not recognizing the DVDs started.
I had done a system restore to an earlier restore point before I had the problems with the drive, but that did not help. So, I undid the system restore. I have also tried uninstalling the drive from the Device Manager and restarted, but that also did not work.
The computer is running Windows 7 Professional 64-bit. The model of the DVD burner is a LiteOn iHAS524-T98 B. The Manufacture Date of the drive is April 2011, so it's not that old of a drive.
I have an Asus M3A76-CM MB with 6 available SATA ports...here is what is being reported in device manager:
ST31000333AS
Location 0 (Channel 2, Target 0, Lun 0)
ST31000340AS
Location 0 (Channel 0, Target 0, Lun 0)
ST32000542AS
Location 0 (Channel 1, Target 0, Lun 0)
in physically looking at the MB, I see that the SATA cable for the 542 is in the 3 position (facing the MB looking down), but is there a way to determine which drive is C: and what is D: (the 542 is being assigned F:, and the CD/DVD is E.
If I plug my flash drive into my PC using Windows XP, it works fine.No problems.But when I plug it into my laptop, using Windows 7 it will not load it.It says newhardware detected, installing new hardware, Hardware installation failed.If I go Device Manager, It is listed under Unknown Devices.I have tried to uninstall all the USB Root Hubs, Restart the computer, in-order for it to auto re-install with the USB in / out of the computer. But it still fails.
View 4 Replies View RelatedI found one thread on here where someone had the same issue, and there were links to two "Fixes" ...one of them worked for the CD I inserted during the process..it showed up in iTunes in everything. When I took the CD out and tried to put it in a new one, it went back to the same thing - saying there is no disc in the drive. I tried running the fix again and this time it keeps saying not fixed. I was so excited because it looked like it worked, but no. The computer says that the drive is working properly, but obviously it isn't. HP wants to charge $60+ to fix it because it's a few months out of warranty.
View 3 Replies View RelatedI have to remove the "Read Only" status from my external USB WD 2TB hard drive which I used as a backup drive. I have tried all suggestions here and in other forums. None have helped. I'm using Win 7. I will be returning the drive to the manufacturer (WD) and I want to (Format) erase all the information on it. All my tax returns information as well as my Quicken data have been backed up to this drive
View 2 Replies View Relatedi cant get the computer to reconize the burner it will show a green light open and close and i can hear it turning but it isnt being reconized by my computer it did work one time and hasnt done it since
View 2 Replies View RelatedMy pendrive is not formating because its read only, how do it?
View 1 Replies View RelatedI cant burn dvds on my hp dv7. I use Win 7 64 bit Home Standard edition. I have owned this computer 3 years now and since my free upgrade from Vista to Win 7 the problem has existed. As far as I can tell the filter trick only works for one or two of these machines, and will only really help the problem when it first manifests itself with burning issues. One day your filters will just break in the registry, and at this point the problem becomes unsolvable, even by changing out hardware, or uninstalling and reinstalling old hardware. It would be nice if someone other than Microsoft or HP would look into this or that said companies would make a real effort to figure out if the problem is an interaction between the firmware and the registry or the driver cache and the registry. I fix networks and computers for a living, and am working on my BSIS in Technology Management?
View 1 Replies View Relatedmy dvd drive can not read copied cds?
View 6 Replies View RelatedI have an Acer Aspire One Happy and have got this message:
"A disk read error occurred Press Ctrl+Alt+Del to restart"
I have been searching for solutions all day but I can't do any of the options described. Pressing f8 to enter safe mode does nothing, nor does alt+f10. I also don't have a cd drive as its just a netbook and no recovery cd came with it even if I did have a portable one. Anyone have any ideas? I'm on a boat in the Arctic for the next month and without my laptop I will likely jump off an iceberg!
I have bought a used computer having windows 7 installed. It had a Hitachi LG combo drive, but it was not working, so I replaced it with a Samsung one. I have checked it on another computer. It was working fine there but it is not working on my PC. It does not show any exclamation mark in device manager. It just read the cd/dvd but does not respond. I have already done with the registry fix and also tried the auto fix from Microsoft site, but nothing worked for me.
View 13 Replies View RelatedOK so since I have installed a fresh copy of Windows 7 on this computer ( it is the first operating system installed on it) I can not write any DVDs .A strange fact is that I can write and read CDs and also read DVDs, but not every time.I got an original CD Album and it's still not recognized by the PC for example, and this happens to many audio CDs.I tried many registry tricks and stuff like that but in vain.The computer is new, bought it one month ago. DVD+RW - Sony Optiaric AD-7260SI also tired to resolve the problem with FixIt but it was also useless.I kept getting the message: "The disc in drive [E:] is not detected, or is not supported"
Ive had this problem once before. I turned my PC on Yesterday, and my WD 500GB Hard drive (Number 3) was not recognised. Then I did a reboot, and the drive showed up again, HOWEVER, The drive has the Read Only flag in DiskPart and using the attrib disk clear readonly commands with the correct disk selected does not work. DiskPart just moans that It cant clear the attribute.
I doubt its a Driver Issue or a Hardware issue as It was working fine. All the tests in Ubuntu 10.04 (my second os) come up good and I can write to it, So Windows 7 has done something, Not sure what.
I have a pair of WD 500GB drives in Raid0 array with the resulting >900Gb partitioned such :
C: Priamry 100Gb - Windows 7 64bit
D: Primary 80 GB - Windows 7 32bit
E: Primary 40GB - Windows 7 32bit
R: Secondary Logical - 355GB - Data
Z: Secondary Logical - 355GB - Data
Using DualBootPro to boot between the various OS Both the Windows 7 32 bit installations give me no problems whatsoever, however, intermitantly when booting into the Windows 7 64 installation sometimes the R drive will appear as read only, or the Z drive will appear as read only or they are both OK.This is more an inconvenience than a major disassater, as a reboot normally resolves the issue. This appears to be cmpletely random, as it does not happen specifically after a boot into either of the Windows 7 32 installtions, but can occur even after a previous successful boot of the Windows 7 64 installation.
So i build a newcomputer yesterday. I decided to use my old SATA hard drive from my computer, it has my OS, and other files on it. I get everything put in, but when i start the computer it says "no hard disk is detected".
I enter the bios menu, and i notice it recognizes that it is in there, as well as my disk drive.
How come it wont let me load my hard drive, and it doesnt detect it when i start it up.. but BIOS sees that its there?