I found one thread on here where someone had the same issue, and there were links to two "Fixes" ...one of them worked for the CD I inserted during the process..it showed up in iTunes in everything. When I took the CD out and tried to put it in a new one, it went back to the same thing - saying there is no disc in the drive. I tried running the fix again and this time it keeps saying not fixed. I was so excited because it looked like it worked, but no. The computer says that the drive is working properly, but obviously it isn't. HP wants to charge $60+ to fix it because it's a few months out of warranty.
Recently my DVD burner does not see any DVDs on my computer that I built a couple of months ago. It does not see Movies, Games(that are DVD), Blank DVD-R or DVD-R that I have written information to. I have put in a few different CDs(Game, Audio and Data) and they do get recognized by the drive. My problems all started when I was writing to a Blank DVD. While it was burning, the burn process failed about midway through. After that happened, my problems with the drive not recognizing the DVDs started.
I had done a system restore to an earlier restore point before I had the problems with the drive, but that did not help. So, I undid the system restore. I have also tried uninstalling the drive from the Device Manager and restarted, but that also did not work.
The computer is running Windows 7 Professional 64-bit. The model of the DVD burner is a LiteOn iHAS524-T98 B. The Manufacture Date of the drive is April 2011, so it's not that old of a drive.
My laptop have DVDRamGT30L HP My computer runs on Window 7 home premium and I use Cyberlink power 2 go for image and burning. I'm from India and recently we has religious function at home. As this was a personal religious event we took service of professional photographer who shoot the event using his digital camera and converted it to image on his computer. he burned image on DVD . I can play DVD on traditional DVD player Though the disk is full my computer drive recognize it as blank DVD. There are total 41 DVDs and some of the DVDs are recognized and can be played on computer. My DVD writer (on PC)is in good condition. The DVD which shows blank on my computer is shown full on photographe's computer.Unfortunately he could only told me that he has transfered this event from his camera disk to computer using some new HD technology. According to him some configuration changes required on my computer. His computer also run on window 7. Also same photographer did this same event recording for me three years ago and all these DVDs play well on my computer?
I don't know whether the Windows 7 forums are the right place for this question, but I hope someone can redirect me.
I have about 150 DVDs which back up my photographs. They were burned between 2003 and early 2009 in Win XP Pro x86, using Nero v.5. They were burned as data discs, not photo discs. The files are almost all in TIF, PSD or Camera Raw format.
I can read them (i.e. open them in Photoshop) in my XP computer. I can read them in Windows 7 x86 in a VMWare virtual machine. But I can't read them in Windows 7 x64.
The drive is a Pioneer DVR-216DBK, and I've installed the latest firmware. It isn't malfunctioning: I can install programs from DVDs/CDs, and I can write DVDs/CDs.
Searching on-line I found a program named Iso Burner, from which I can slowly and laboriously 'run' individual files (i.e. open them in PS), but I need to be able to see the contents in Bridge.
Can I do this if I:
a) buy a DVD drive that supports older formats, or
b) move the DVD drive that wrote the discs to my Windows 7 machine, or
c) download drivers from....?, or
d) buy the latest version of Nero (which I hoped to avoid; I hardly use DVDs for backup any more)
My DVD rom drive will not read dvds or dvd software but it will play cds, This has happened before to me but I was able to call someone, It happened after I Uninstalled Norton and I had to remove a key and restart the laptop up and it worked, But I cannot remember for the life of me on how to do it again, I Uninstalled Avg then reinstalled it since then my drive hasn't been playing dvds just cds. I know This is probably the same as what has happened before, I know I have to go into regedit but not sure where to go after that
It is not, It works fine in Linux. I need to find out why the DVD will not read blank discs. I unistalled Nero 10 and it rand fine then stopped working again. I installed Roxio 2011. I even flashed the BIOS on the drive,but it still will not burn blank discs in windows.
Just built my new computer but realized that I can't use the same Windows 7 disc/cd-key that's on my old computer because it's only one per computer when I thought it was 3.Looking at the prices on the Windows 7, it costs $119 for upgrade and $200 for full retail. From what I have read, when installing using the upgrade disc, it would detect my previous Windows version and if it's older than XP, or if there's no Windows installed, it would not activate Windows as it isn't a proper license and I would need the full retail one.
From what I can see, this seems to be a fairly common problem across computers...My Dell Inspiron n5010 (Windows 7 Home Premium 64bit) sporadically won't read DVDs. A couple of nights ago, it took a couple of tries - last night, I couldn't get it play one at all.Having looked for various fixes, I have tried the following:-Updating drivers-Disabling and re-enabling the drive in device manager-Going into the registry to remove recommended entries (high/low filters i think? I only had the "high" option, which apparently means that fix isn't for me...)-Uninstalling any DVD-burning software that may be interfering with my laptop's own DVD player/software.
I have a Toshiba Satellite laptop with windows 7 and the DVD drive is not working at all. I have tried with brand new DVDs, music CDs and video games and none of them work.When I put in a disc there are a few wurring noises but nothing loads up. When I click on the drive in Computer the drive opens and tells me to insert a disc.In properties and Device Manager it says the device is working properly.I have tried reinstalling the drive, deleting upper and lower filters, and I have run the Windows Fixit program and nothing has worked so far. My drive is: TSSTcorp CDDVDW TS-L633C ATA Device.My computer is about a year old and is completely standard. I have hardly used the DVD driver at all since I purchased the computer so I have no idea how it could have broke.
I noticed this a few minutes ago, I just got finished watching a movie, and was putting music on when I was about to load World of Warcraft, I brought up winamp with the tracks from the CD that I had saved to my playlist, and it'd skip right over them to the next track I'd saved on my hard drive, I'd tried deleting the filters as I'd seen in other threads, and even shutting down, unplugging it, and re-plugging it back into my power supply, but still to no avail.
I have an ASUS laptop fairly new and I tryed playing a dvd and it won't work, says it doesnt recognise the format (normal region 2 dvd) it plays cds just fine but not dvds, ive tried updating the drivers and checking its set to the right region but they say they are up to date?
In my Inspiron 1545 the Optiarc DVD +/- RW AD-7560s recognizing CDs but not DVDs or DVD-RW. Have installed the latest drivers, but still unable to play DVDs. What else can I try?
Dvd drive acting strangely. It will burn anything, cds or dvds. It will read dvds burned from laptop. It will not play any commercial dvd. I have tried old dvds and new ones, still nothing. I first tried uninstalling the drive, didn't work. Also tried deleting the upper and lower filters, still nothing. Then did a total recovery of the OS, still nothing. I'm at a loss. This drive is 2 years old, which isn't that old. I've pulled out the drive and made sure the terminals were clean, and that still didn't fix it.
Most of CDs and DVDs are working fine, but there are some which my DVD RW doesn't recognize. When I insert them, it doesn't react at all or it says that CD/DVD is blank. These CDs and DVDs are working without any problems on my old computer with Windows XP and also on my brother's laptop with Windows XP.
This just started acting up. If I stick software disk in drive, like I just installed TurboTax, runs AutoPlay, give me install prompts. Tried burning a DVD today using ImgBurn (done it at least 100 times) today, get error, No media in drive. Tried playing a store bought DVD Movie, drive will not regognize. Device manager says its working fine with the most current driver.
I'm not a newbie when it comes to PCs either, I build my own and repair/troubleshoot others.
For some reason, my computer stopped reading DVDs in the drive. CDs load fine and I can burn to them. I checked the hardware properties and somehow Windows has decided to install a CDROM driver to the device, which is why I believe DVDs are no longer being read. I've tried going through and uninstalling the driver and getting rid of the registry keys assosicated in order for the correct driver to be installed, but Windows keeps installing incorrect ones.This just happened a few days ago, tried restoring Windows to a week ago and same problem exists. Less than a month ago I used it to install Diablo 3 so I know it works fine.
I bought a Dell Inspiron 1545 laptop new in Italy in December 2009 from a major computer store. The computer came installed with Windows 7 Home Premium (Italian), and I have installed on it an original version of Microsoft Office XP 2003 Professional Edition (English). The CD-ROM unit is a Matsushita DVD+-RW UJ890.Since I bought the computer I have sometimes had difficulty burning DVDs with the built-in Windows 7 burner function that I access from Explorer. Often in the past I have ended up with partially written DVDs. Nevertheless by using high-quality DVDs I have been able to burn DVDs successfully most of the time using the Windows 7 utility. I last used the utility successfully a couple of months ago when I burned a couple of DVDs to backup some photos.
Since yesterday I have been trying to backup my most important files onto DVDs. The attempt has failed in every case. First I copy about 3 GB of files from drive C: onto drive D: in Explorer. These are several hundred files divided into three different directories, consisting mostly of PDF, Word, Excel, and JPG files, some of them with names in foreign scripts like Cyrillic, Japanese, or Chinese. Then I insert a new DVD (either Verbatim or TDK) and attempt to master the DVD by selecting the option �write to disk� from the Explorer menu (whether from the menus at the top of the screen or by right-clicking on drive D: in the lefthand pane of the screen). A window pops up asking me for the name of the disk, whether I want it to be �flash� or one-time only, and the recording speed (8x, 4x, 2x, etc.).
Once I click �continue� to start burning the DVD, a window pops up to tell me that Windows is making an image of the disk, and then the window tells me that it has begun mastering the disk, giving me a countdown of how many minutes are left (6 minutes to 11 minutes, depending on the speed I choose). But no matter what name I give to the disk and what recording speed I pick, after 30-60 seconds the popup window and the Explorer window both suddenly close and the DVD unit�s writing light goes out, but the DVD unit continues to whir at high speed forever.
Here are the results I got yesterday with 3 separate DVDs:
1. On the first DVD I used Windows 7�s burn utility on a Verbatim DVD, and I ended up with 28 files burned onto the DVD (making it unusable).
2. On the second try I used some simple burn software that I had used before � Roxio Burn � on a TDK DVD, and ended up with 4 files burned onto the disk (but from different folders than the 28 files burned by Windows 7).
3. On my third attempt, after going offline, shutting down my antivirus software (AVG), and using Task Manager to shut down processes from that other burn software, Roxio Burn, I used Windows 7�s burn utility again on a TDK DVD and ended up with the identical 28 files that had I ended up with the first time, though this time I had chosen a lower writing speed.
In all three of these attempts the DVD unit continued to whir after the windows had closed, until such time as I ejected the disk manually.When I first encountered this problem yesterday I thought the problem might be caused by my antivirus software � AVG Free Edition � interfering with the writing process, because after one particular automatic update by AVG about two months ago I began having problems with AVG blocking Skype and placing some of my Nokia cell phone software in quarantine. But by disabling the HIPS element of AVG I was able to resolve those problems several weeks ago and begin using Skype successfully again. But just to be sure, today I disinstalled AVG completely and installed Microsoft Security Essentials. Because I had read in a forum online that Windows 7 might have conflicts with other burning software that was also installed, today I also disinstalled the only burning software that I had installed � Roxio Burn � and did a cold reboot. Before attempting to burn a DVD again today, I also used Task Manager to shut down some other processes that didn�t seem necessary, such as a Nokia autolauncher and a Java autoupdate process. I also changed the time delay for Windows� sleep or power-save function to one hour.
I inserted a new TDK DVD, accepted the disk name proposed by Windows, chose for the disk to be permanent rather than flash, and chose a burning speed of 4x. After 30 seconds I received a popup window with the following message:
�ST Service Scheduling has stopped working.�I ignored this message and did nothing, because often in the past when I have succeeded in burning DVDs with Windows 7's utility I have had this message appear, but if I do nothing I almost always have the burn proceed successfully. In this case, though, after another 10-20 seconds the Explorer window and burning-countdown window both closed, the DVD light went out, but the DVD continued whirring at high velocity. The DVD unit did not respond to my pushing the expel button by hand, and when I tried to expel the DVD using Explorer I only got an error message, so the DVD could be expelled only by shutting down the computer.When I turned the computer back on, I discovered that no files at all had been written to this DVD.below are the details from the ST Service Scheduling error message (in Italian, sorry). Whenever I get these ST Service Scheduling error messages I get them twice, i.e., after choosing �Close� one time the same message immediately appears again and I have to choose �Close� a second time.
Nome evento problema:APPCRASH Nome applicazione:STService.exe Versione applicazione:1.0.0.64 Timestamp applicazione:4ae02c43
My Optiarc DVD RW AD-7203A drive refuses to recognize any sort of media I put within it. I am unsure of when this problem occured (because I rarely use the drive, which begs the question of how in the world can it stop working), but I do know that nothing I have tried has helped me.I've tried all of the following:Editing the registry to no avail because the "Lower Filters" key is not present, therefore the kb article is of no use.Uninstalling/reinstalling the drive Changing the Start key in the registry to "3" Formatting the entire machine and restoring to factory settings The thing is, whenever I enter the Device Manager to check on the drive, it keeps saying it's working perfectly/drivers are up-to-date/blah blah blah. I've tried searching everywhere but to no avail, and I may soon just take a hammer to it and be done with this crap.However, I am hoping that you mates can help me before rage takes over and I smash this thing to bits! Also, is it possible for a drive to be stuck in "burn mode" (as in it thinks it's always burning a cd/dvd)?
I have an Asus M3A76-CM MB with 6 available SATA ports...here is what is being reported in device manager:
ST31000333AS
Location 0 (Channel 2, Target 0, Lun 0)
ST31000340AS
Location 0 (Channel 0, Target 0, Lun 0)
ST32000542AS
Location 0 (Channel 1, Target 0, Lun 0)
in physically looking at the MB, I see that the SATA cable for the 542 is in the 3 position (facing the MB looking down), but is there a way to determine which drive is C: and what is D: (the 542 is being assigned F:, and the CD/DVD is E.
If I plug my flash drive into my PC using Windows XP, it works fine.No problems.But when I plug it into my laptop, using Windows 7 it will not load it.It says newhardware detected, installing new hardware, Hardware installation failed.If I go Device Manager, It is listed under Unknown Devices.I have tried to uninstall all the USB Root Hubs, Restart the computer, in-order for it to auto re-install with the USB in / out of the computer. But it still fails.
Tried several so called fixes but nothing has resolved the issue of not reading a blank cd or dvd and no recording tab in the cd drive properties in my Sony Vaio vpceb43fx running Windows 7 64-bit.
I have to remove the "Read Only" status from my external USB WD 2TB hard drive which I used as a backup drive. I have tried all suggestions here and in other forums. None have helped. I'm using Win 7. I will be returning the drive to the manufacturer (WD) and I want to (Format) erase all the information on it. All my tax returns information as well as my Quicken data have been backed up to this drive
i cant get the computer to reconize the burner it will show a green light open and close and i can hear it turning but it isnt being reconized by my computer it did work one time and hasnt done it since
