Have 3 Dvds Recovery How Can I Move Them To Usb Drive
Jan 15, 2013i have 3 dvds recovery how can ia maove them to usb drive
View 4 Repliesi have 3 dvds recovery how can ia maove them to usb drive
View 4 RepliesPurchased new Acer Veriton VM498G-Ui3550W computer. When trying to create back-up DVD's, system claims that the DVD's aren't formatted and asks to format them. When formatting is ok'ed, the computer works for a while and then states that formatting failed. I have the same results when trying DVD-R, DVD+R, and DVD+R/W discs.
Acer has given me two sets of instructions on how to creaate recovery disks, but both instruct me to launch programs that don't show up on my "Start - All Programs" menu.Acer has offered to send me recovery disks, but I am concerned why the machine will not make them.I did place recovery files (successfully ?) into the data partition of the hard drive, but this will be of no use with a hard drive failure.
I've been using a HP pavillion dv6 3043TX, with a samsung hard disk, and built-in win.7 home premium and due to power short prob i was recommended by HP to create recovery DVDs (5 discs) and replace it. Now Ive replaced it with a 'seagste' of 450 gb capacity. A friend has installed a version of windows 7 ultimate with partitions. BUT i want to use the original pack i have recovered with all the HP tools and partition.
View 3 Replies View RelatedI have just bought HP pavilion G6 notebook. It came with pre-installed Genuine Windows 7 Home Premium 64bit, recovery disk of 14 gb and C: Hard drive of 451 gb.
I have made 3 recovery disks(DVDS) using "Recovery Media creation". I Want to Reinstall Windows 7 because 1)want to get rid of recovery disk of 14gb. 2)want to do partition because without partition my system is really slow.
I want to reinstall Windows 7 using these 3 DVDs.
My Laptop Notebook was stolen recently. It was VAIO/EA2/GX. I had made it's recovery discs before stealing. It's os was 7 prof x64. So i have recovery dvds now. I want to get it's MAC address through those recovery dvds. how to get my laptop MAC address through its recovery dvds?
View 1 Replies View RelatedI have a HP Pavilion dv6 3170se i7 intel processor.I want to create a DVD from the Recovery Manger program, but the option is not available, it wont let me press it. alternative way to restore the laptop to its factory settings.Currently running Windws 7 ultimate x64.
View 9 Replies View RelatedI've created the recovery DVDs, but unbeknown to me at the time - you're only allowed to create one set. What i'd like is to put this onto a USB stick.Currently i have:DVD #1 - Boot Media: (312mb)The boot DVD containing "BOOT" folder, BootMgr file which is quite small & Winre.Wim at about 300mb.DVD #2 - Data DVD #1: (4.03GB)factory recovery folder, recovery folder & Autorun fileDVD #3 - Data DVD #2: (3.87GB)factory recovery folder & recovery folder (NO autorun file)DVD #4 - Data DVD #3: (3.04GB)factory recovery folder, recovery folder, LenovoQDrive file, qdrive icon file.My USB stick is 16GB capacity.So basically i'd like to make the USB stick the recovery media. I can't do this from the laptop as Lenovo only let you create one ......... so how can i do this
View 9 Replies View RelatedRecently my DVD burner does not see any DVDs on my computer that I built a couple of months ago. It does not see Movies, Games(that are DVD), Blank DVD-R or DVD-R that I have written information to. I have put in a few different CDs(Game, Audio and Data) and they do get recognized by the drive. My problems all started when I was writing to a Blank DVD. While it was burning, the burn process failed about midway through. After that happened, my problems with the drive not recognizing the DVDs started.
I had done a system restore to an earlier restore point before I had the problems with the drive, but that did not help. So, I undid the system restore. I have also tried uninstalling the drive from the Device Manager and restarted, but that also did not work.
The computer is running Windows 7 Professional 64-bit. The model of the DVD burner is a LiteOn iHAS524-T98 B. The Manufacture Date of the drive is April 2011, so it's not that old of a drive.
I have a Toshiba Satellite laptop with windows 7 and the DVD drive is not working at all. I have tried with brand new DVDs, music CDs and video games and none of them work.When I put in a disc there are a few wurring noises but nothing loads up. When I click on the drive in Computer the drive opens and tells me to insert a disc.In properties and Device Manager it says the device is working properly.I have tried reinstalling the drive, deleting upper and lower filters, and I have run the Windows Fixit program and nothing has worked so far. My drive is: TSSTcorp CDDVDW TS-L633C ATA Device.My computer is about a year old and is completely standard. I have hardly used the DVD driver at all since I purchased the computer so I have no idea how it could have broke.
View 9 Replies View RelatedI noticed this a few minutes ago, I just got finished watching a movie, and was putting music on when I was about to load World of Warcraft, I brought up winamp with the tracks from the CD that I had saved to my playlist, and it'd skip right over them to the next track I'd saved on my hard drive, I'd tried deleting the filters as I'd seen in other threads, and even shutting down, unplugging it, and re-plugging it back into my power supply, but still to no avail.
View 9 Replies View RelatedI found one thread on here where someone had the same issue, and there were links to two "Fixes" ...one of them worked for the CD I inserted during the process..it showed up in iTunes in everything. When I took the CD out and tried to put it in a new one, it went back to the same thing - saying there is no disc in the drive. I tried running the fix again and this time it keeps saying not fixed. I was so excited because it looked like it worked, but no. The computer says that the drive is working properly, but obviously it isn't. HP wants to charge $60+ to fix it because it's a few months out of warranty.
View 3 Replies View RelatedI have an ASUS laptop fairly new and I tryed playing a dvd and it won't work, says it doesnt recognise the format (normal region 2 dvd) it plays cds just fine but not dvds, ive tried updating the drivers and checking its set to the right region but they say they are up to date?
View 7 Replies View RelatedIn my Inspiron 1545 the Optiarc DVD +/- RW AD-7560s recognizing CDs but not DVDs or DVD-RW. Have installed the latest drivers, but still unable to play DVDs. What else can I try?
View 4 Replies View RelatedToshiba DVD Player in Windows7 It worked with Vista
View 1 Replies View RelatedDvd drive acting strangely. It will burn anything, cds or dvds. It will read dvds burned from laptop. It will not play any commercial dvd. I have tried old dvds and new ones, still nothing. I first tried uninstalling the drive, didn't work. Also tried deleting the upper and lower filters, still nothing. Then did a total recovery of the OS, still nothing. I'm at a loss. This drive is 2 years old, which isn't that old. I've pulled out the drive and made sure the terminals were clean, and that still didn't fix it.
View 2 Replies View RelatedMost of CDs and DVDs are working fine, but there are some which my DVD RW doesn't recognize. When I insert them, it doesn't react at all or it says that CD/DVD is blank. These CDs and DVDs are working without any problems on my old computer with Windows XP and also on my brother's laptop with Windows XP.
View 4 Replies View RelatedThis just started acting up. If I stick software disk in drive, like I just installed TurboTax, runs AutoPlay, give me install prompts. Tried burning a DVD today using ImgBurn (done it at least 100 times) today, get error, No media in drive. Tried playing a store bought DVD Movie, drive will not regognize. Device manager says its working fine with the most current driver.
View 2 Replies View RelatedI have a dvd drive which reads all cds and dvd's but it is not reading duplicate dvds for eg: natinal etc
View 1 Replies View RelatedI'm not a newbie when it comes to PCs either, I build my own and repair/troubleshoot others.
For some reason, my computer stopped reading DVDs in the drive. CDs load fine and I can burn to them. I checked the hardware properties and somehow Windows has decided to install a CDROM driver to the device, which is why I believe DVDs are no longer being read. I've tried going through and uninstalling the driver and getting rid of the registry keys assosicated in order for the correct driver to be installed, but Windows keeps installing incorrect ones.This just happened a few days ago, tried restoring Windows to a week ago and same problem exists. Less than a month ago I used it to install Diablo 3 so I know it works fine.
[code]...
My laptop have DVDRamGT30L HP My computer runs on Window 7 home premium and I use Cyberlink power 2 go for image and burning. I'm from India and recently we has religious function at home. As this was a personal religious event we took service of professional photographer who shoot the event using his digital camera and converted it to image on his computer. he burned image on DVD . I can play DVD on traditional DVD player Though the disk is full my computer drive recognize it as blank DVD. There are total 41 DVDs and some of the DVDs are recognized and can be played on computer. My DVD writer (on PC)is in good condition. The DVD which shows blank on my computer is shown full on photographe's computer.Unfortunately he could only told me that he has transfered this event from his camera disk to computer using some new HD technology. According to him some configuration changes required on my computer. His computer also run on window 7. Also same photographer did this same event recording for me three years ago and all these DVDs play well on my computer?
View 3 Replies View RelatedI am trying to delete the recovery drive and use all the c and recovery drive with windows 7. I do however want the Toshiba extras that come with it, well some of them. I also would like to use the windows experiance ratings.
View 9 Replies View RelatedHow can I move programs and files from my ssd boot drive to my data drive (Windows 7 x64 PC)?
View 3 Replies View RelatedI have used many cloning software.
- Macrium Reflect
- EaseUS Disk Copy & Todo Backup
- RoboCopy
- Paragon Backup & Recovery
I'd like to move Windows from one drive to another without backing up THEN restoring. This is an extra step that I consider unnecessary.RoboCopy ALMOST did it correctly. But it corrupted the Outlook Registry. Microsoft recommended to uninstall and re-install Office.
I have a folder called PICS with a bunch of sub-folders
[code]...
If I copy the PICS folder over to the USB drive and keep the same directory structure, is there an easy way to update all of the shortcuts so the files can be accessed when the drive is plugged into another computer?
have an old 250GB HD with XP PRO on it and ALL my programs.
I have a NEW PC with win 7 PRO, now I want to ad the XP drive to the win7 box and boot ether from XP or Win7 from the boot screen (select ether XP OR Win7). I have google for hours all I was able to find was information on ONE Drive and then portion it and reinstall an OS.
I do not want to portion anything or reinstall any OS I just would like to DUEL BOOT. Both HD are Sata Drives. I do not have Win7 CD as it is in on the recovery portion. I would like to know what files are needed and were to put them (what Drive) in order to duel boot.
how to move windows 7 to d drive It is in c drive right now
View 2 Replies View RelatedI bought a Dell Inspiron 1545 laptop new in Italy in December 2009 from a major computer store. The computer came installed with Windows 7 Home Premium (Italian), and I have installed on it an original version of Microsoft Office XP 2003 Professional Edition (English). The CD-ROM unit is a Matsushita DVD+-RW UJ890.Since I bought the computer I have sometimes had difficulty burning DVDs with the built-in Windows 7 burner function that I access from Explorer. Often in the past I have ended up with partially written DVDs. Nevertheless by using high-quality DVDs I have been able to burn DVDs successfully most of the time using the Windows 7 utility. I last used the utility successfully a couple of months ago when I burned a couple of DVDs to backup some photos.
Since yesterday I have been trying to backup my most important files onto DVDs. The attempt has failed in every case. First I copy about 3 GB of files from drive C: onto drive D: in Explorer. These are several hundred files divided into three different directories, consisting mostly of PDF, Word, Excel, and JPG files, some of them with names in foreign scripts like Cyrillic, Japanese, or Chinese. Then I insert a new DVD (either Verbatim or TDK) and attempt to master the DVD by selecting the option �write to disk� from the Explorer menu (whether from the menus at the top of the screen or by right-clicking on drive D: in the lefthand pane of the screen). A window pops up asking me for the name of the disk, whether I want it to be �flash� or one-time only, and the recording speed (8x, 4x, 2x, etc.).
Once I click �continue� to start burning the DVD, a window pops up to tell me that Windows is making an image of the disk, and then the window tells me that it has begun mastering the disk, giving me a countdown of how many minutes are left (6 minutes to 11 minutes, depending on the speed I choose). But no matter what name I give to the disk and what recording speed I pick, after 30-60 seconds the popup window and the Explorer window both suddenly close and the DVD unit�s writing light goes out, but the DVD unit continues to whir at high speed forever.
Here are the results I got yesterday with 3 separate DVDs:
1. On the first DVD I used Windows 7�s burn utility on a Verbatim DVD, and I ended up with 28 files burned onto the DVD (making it unusable).
2. On the second try I used some simple burn software that I had used before � Roxio Burn � on a TDK DVD, and ended up with 4 files burned onto the disk (but from different folders than the 28 files burned by Windows 7).
3. On my third attempt, after going offline, shutting down my antivirus software (AVG), and using Task Manager to shut down processes from that other burn software, Roxio Burn, I used Windows 7�s burn utility again on a TDK DVD and ended up with the identical 28 files that had I ended up with the first time, though this time I had chosen a lower writing speed.
In all three of these attempts the DVD unit continued to whir after the windows had closed, until such time as I ejected the disk manually.When I first encountered this problem yesterday I thought the problem might be caused by my antivirus software � AVG Free Edition � interfering with the writing process, because after one particular automatic update by AVG about two months ago I began having problems with AVG blocking Skype and placing some of my Nokia cell phone software in quarantine. But by disabling the HIPS element of AVG I was able to resolve those problems several weeks ago and begin using Skype successfully again. But just to be sure, today I disinstalled AVG completely and installed Microsoft Security Essentials. Because I had read in a forum online that Windows 7 might have conflicts with other burning software that was also installed, today I also disinstalled the only burning software that I had installed � Roxio Burn � and did a cold reboot. Before attempting to burn a DVD again today, I also used Task Manager to shut down some other processes that didn�t seem necessary, such as a Nokia autolauncher and a Java autoupdate process. I also changed the time delay for Windows� sleep or power-save function to one hour.
I inserted a new TDK DVD, accepted the disk name proposed by Windows, chose for the disk to be permanent rather than flash, and chose a burning speed of 4x. After 30 seconds I received a popup window with the following message:
�ST Service Scheduling has stopped working.�I ignored this message and did nothing, because often in the past when I have succeeded in burning DVDs with Windows 7's utility I have had this message appear, but if I do nothing I almost always have the burn proceed successfully. In this case, though, after another 10-20 seconds the Explorer window and burning-countdown window both closed, the DVD light went out, but the DVD continued whirring at high velocity. The DVD unit did not respond to my pushing the expel button by hand, and when I tried to expel the DVD using Explorer I only got an error message, so the DVD could be expelled only by shutting down the computer.When I turned the computer back on, I discovered that no files at all had been written to this DVD.below are the details from the ST Service Scheduling error message (in Italian, sorry). Whenever I get these ST Service Scheduling error messages I get them twice, i.e., after choosing �Close� one time the same message immediately appears again and I have to choose �Close� a second time.
Nome evento problema:APPCRASH
Nome applicazione:STService.exe
Versione applicazione:1.0.0.64
Timestamp applicazione:4ae02c43
[code]....
I followed the illustration in a previous posting for this subject, provided by Mike, and 'moved' my folders to D:. am confused to see that they are now in 2 locations - ie still on the C:. When I go to C: prompt and call up DIR for D: it tells me there are no files there, although I can see them in Explorer.Can I just delete the folders on the C: or am I going to cause a problem doing this (hidden system files within the folders???). Should I only delete the actual files?
View 5 Replies View RelatedCan this be done? I have a Tivo that reads my public folder. Since I keep a lot of large video files in that folder I would prefer to have it on my D: drive rather than my C: drive.
View 3 Replies View RelatedI have 2 drives c and d in which i want to shift my windows files into drive c but it shows ' Error 0x80070057: The parameter is incorrect.
View 4 Replies View RelatedI have all my programs stored on the P: drive but its running out of room and the D: drive is available.
Question: If I move all the programs to the D: drive and rename it to P:, will everything run from existing shortcuts?
Is there a simpler migration I am overlooking?