This just started acting up. If I stick software disk in drive, like I just installed TurboTax, runs AutoPlay, give me install prompts. Tried burning a DVD today using ImgBurn (done it at least 100 times) today, get error, No media in drive. Tried playing a store bought DVD Movie, drive will not regognize. Device manager says its working fine with the most current driver.
View 2 Replies
Recently my DVD burner does not see any DVDs on my computer that I built a couple of months ago. It does not see Movies, Games(that are DVD), Blank DVD-R or DVD-R that I have written information to. I have put in a few different CDs(Game, Audio and Data) and they do get recognized by the drive. My problems all started when I was writing to a Blank DVD. While it was burning, the burn process failed about midway through. After that happened, my problems with the drive not recognizing the DVDs started.
I had done a system restore to an earlier restore point before I had the problems with the drive, but that did not help. So, I undid the system restore. I have also tried uninstalling the drive from the Device Manager and restarted, but that also did not work.
The computer is running Windows 7 Professional 64-bit. The model of the DVD burner is a LiteOn iHAS524-T98 B. The Manufacture Date of the drive is April 2011, so it's not that old of a drive.
I have a Toshiba Satellite laptop with windows 7 and the DVD drive is not working at all. I have tried with brand new DVDs, music CDs and video games and none of them work.When I put in a disc there are a few wurring noises but nothing loads up. When I click on the drive in Computer the drive opens and tells me to insert a disc.In properties and Device Manager it says the device is working properly.I have tried reinstalling the drive, deleting upper and lower filters, and I have run the Windows Fixit program and nothing has worked so far. My drive is: TSSTcorp CDDVDW TS-L633C ATA Device.My computer is about a year old and is completely standard. I have hardly used the DVD driver at all since I purchased the computer so I have no idea how it could have broke.
View 9 Replies View RelatedI noticed this a few minutes ago, I just got finished watching a movie, and was putting music on when I was about to load World of Warcraft, I brought up winamp with the tracks from the CD that I had saved to my playlist, and it'd skip right over them to the next track I'd saved on my hard drive, I'd tried deleting the filters as I'd seen in other threads, and even shutting down, unplugging it, and re-plugging it back into my power supply, but still to no avail.
View 9 Replies View RelatedI found one thread on here where someone had the same issue, and there were links to two "Fixes" ...one of them worked for the CD I inserted during the process..it showed up in iTunes in everything. When I took the CD out and tried to put it in a new one, it went back to the same thing - saying there is no disc in the drive. I tried running the fix again and this time it keeps saying not fixed. I was so excited because it looked like it worked, but no. The computer says that the drive is working properly, but obviously it isn't. HP wants to charge $60+ to fix it because it's a few months out of warranty.
View 3 Replies View RelatedI have an ASUS laptop fairly new and I tryed playing a dvd and it won't work, says it doesnt recognise the format (normal region 2 dvd) it plays cds just fine but not dvds, ive tried updating the drivers and checking its set to the right region but they say they are up to date?
View 7 Replies View RelatedIn my Inspiron 1545 the Optiarc DVD +/- RW AD-7560s recognizing CDs but not DVDs or DVD-RW. Have installed the latest drivers, but still unable to play DVDs. What else can I try?
View 4 Replies View RelatedToshiba DVD Player in Windows7 It worked with Vista
View 1 Replies View RelatedDvd drive acting strangely. It will burn anything, cds or dvds. It will read dvds burned from laptop. It will not play any commercial dvd. I have tried old dvds and new ones, still nothing. I first tried uninstalling the drive, didn't work. Also tried deleting the upper and lower filters, still nothing. Then did a total recovery of the OS, still nothing. I'm at a loss. This drive is 2 years old, which isn't that old. I've pulled out the drive and made sure the terminals were clean, and that still didn't fix it.
View 2 Replies View Relatedi have 3 dvds recovery how can ia maove them to usb drive
View 4 Replies View RelatedMost of CDs and DVDs are working fine, but there are some which my DVD RW doesn't recognize. When I insert them, it doesn't react at all or it says that CD/DVD is blank. These CDs and DVDs are working without any problems on my old computer with Windows XP and also on my brother's laptop with Windows XP.
View 4 Replies View RelatedI have a dvd drive which reads all cds and dvd's but it is not reading duplicate dvds for eg: natinal etc
View 1 Replies View RelatedI'm not a newbie when it comes to PCs either, I build my own and repair/troubleshoot others.
For some reason, my computer stopped reading DVDs in the drive. CDs load fine and I can burn to them. I checked the hardware properties and somehow Windows has decided to install a CDROM driver to the device, which is why I believe DVDs are no longer being read. I've tried going through and uninstalling the driver and getting rid of the registry keys assosicated in order for the correct driver to be installed, but Windows keeps installing incorrect ones.This just happened a few days ago, tried restoring Windows to a week ago and same problem exists. Less than a month ago I used it to install Diablo 3 so I know it works fine.
[code]...
I have been using Win 7 Professional, Backup and Restore sucessfully for almost a year where I have been backing up my computer (250Gbyte Sys Image and 150Gbyte User Folder) to a network dual RAID 2TB each hardrives. A few months ago, these backups failed to complete sucessfully, causing the computer to lock up. At first, I thought it was becuase I left the computer running for too many days but it seemed to lock up every Sun morning which is when I discovered that it coincided with my scheduled backup time. What happens is during backup, the RAM memory slowly increases until it gets into the mid 90%, the computer locks up and displays an error message, not enough memory.I have reduced my backup size from 150Gbyte to 50GByte and I still get the same result, I have completely started over with a new backup setup, selecting the network drive etc. No luck there.
View 1 Replies View RelatedMy laptop have DVDRamGT30L HP My computer runs on Window 7 home premium and I use Cyberlink power 2 go for image and burning. I'm from India and recently we has religious function at home. As this was a personal religious event we took service of professional photographer who shoot the event using his digital camera and converted it to image on his computer. he burned image on DVD . I can play DVD on traditional DVD player Though the disk is full my computer drive recognize it as blank DVD. There are total 41 DVDs and some of the DVDs are recognized and can be played on computer. My DVD writer (on PC)is in good condition. The DVD which shows blank on my computer is shown full on photographe's computer.Unfortunately he could only told me that he has transfered this event from his camera disk to computer using some new HD technology. According to him some configuration changes required on my computer. His computer also run on window 7. Also same photographer did this same event recording for me three years ago and all these DVDs play well on my computer?
View 3 Replies View Relatedmy hard drive that runs my windows 7 wouldn't boot, so in the end I re-imaged it, and since then I have no sound. I updated my drivers, checked it wasn't muted in the bottom panel, changed my leads, tried different types of leads, directly attached it to my tv to ensure it wasn't a problem with the amplifier, went to ASUS's site downloaded the new drivers again directly from them, got a snazzy new aplication out of it but still no sound. Checked my graphics cards are in securely, checked they're showing up, updated those drivers, ran windows updates a few thousand times, ran mr fix it, he tells me that the speakers, headphones etc are not plugged in, but they are. At least that's what the good fellow told me before my asus driver update, I will check back with him after walking my dog.
View 2 Replies View RelatedI'm using a decent Lenovo B560 laptop, and when playing games or running programs linked to the hard drive disk, it freezes intermittently.
Not sure what's causing it, but the whirring of the disk drive can be heard for about 3 seconds, at which point it slows down, and then the game freezes until the hard drive starts whirring again. It doesn't seem to be able to keep itself running in order to keep playback fluid; it just keeps spinning long enough to power 3-4 seconds of playback.
System is 7 64 bit, with Intel Core i5 CPU M480 @
2.67GHz
3GB RAM
I bought a Dell Inspiron 1545 laptop new in Italy in December 2009 from a major computer store. The computer came installed with Windows 7 Home Premium (Italian), and I have installed on it an original version of Microsoft Office XP 2003 Professional Edition (English). The CD-ROM unit is a Matsushita DVD+-RW UJ890.Since I bought the computer I have sometimes had difficulty burning DVDs with the built-in Windows 7 burner function that I access from Explorer. Often in the past I have ended up with partially written DVDs. Nevertheless by using high-quality DVDs I have been able to burn DVDs successfully most of the time using the Windows 7 utility. I last used the utility successfully a couple of months ago when I burned a couple of DVDs to backup some photos.
Since yesterday I have been trying to backup my most important files onto DVDs. The attempt has failed in every case. First I copy about 3 GB of files from drive C: onto drive D: in Explorer. These are several hundred files divided into three different directories, consisting mostly of PDF, Word, Excel, and JPG files, some of them with names in foreign scripts like Cyrillic, Japanese, or Chinese. Then I insert a new DVD (either Verbatim or TDK) and attempt to master the DVD by selecting the option �write to disk� from the Explorer menu (whether from the menus at the top of the screen or by right-clicking on drive D: in the lefthand pane of the screen). A window pops up asking me for the name of the disk, whether I want it to be �flash� or one-time only, and the recording speed (8x, 4x, 2x, etc.).
Once I click �continue� to start burning the DVD, a window pops up to tell me that Windows is making an image of the disk, and then the window tells me that it has begun mastering the disk, giving me a countdown of how many minutes are left (6 minutes to 11 minutes, depending on the speed I choose). But no matter what name I give to the disk and what recording speed I pick, after 30-60 seconds the popup window and the Explorer window both suddenly close and the DVD unit�s writing light goes out, but the DVD unit continues to whir at high speed forever.
Here are the results I got yesterday with 3 separate DVDs:
1. On the first DVD I used Windows 7�s burn utility on a Verbatim DVD, and I ended up with 28 files burned onto the DVD (making it unusable).
2. On the second try I used some simple burn software that I had used before � Roxio Burn � on a TDK DVD, and ended up with 4 files burned onto the disk (but from different folders than the 28 files burned by Windows 7).
3. On my third attempt, after going offline, shutting down my antivirus software (AVG), and using Task Manager to shut down processes from that other burn software, Roxio Burn, I used Windows 7�s burn utility again on a TDK DVD and ended up with the identical 28 files that had I ended up with the first time, though this time I had chosen a lower writing speed.
In all three of these attempts the DVD unit continued to whir after the windows had closed, until such time as I ejected the disk manually.When I first encountered this problem yesterday I thought the problem might be caused by my antivirus software � AVG Free Edition � interfering with the writing process, because after one particular automatic update by AVG about two months ago I began having problems with AVG blocking Skype and placing some of my Nokia cell phone software in quarantine. But by disabling the HIPS element of AVG I was able to resolve those problems several weeks ago and begin using Skype successfully again. But just to be sure, today I disinstalled AVG completely and installed Microsoft Security Essentials. Because I had read in a forum online that Windows 7 might have conflicts with other burning software that was also installed, today I also disinstalled the only burning software that I had installed � Roxio Burn � and did a cold reboot. Before attempting to burn a DVD again today, I also used Task Manager to shut down some other processes that didn�t seem necessary, such as a Nokia autolauncher and a Java autoupdate process. I also changed the time delay for Windows� sleep or power-save function to one hour.
I inserted a new TDK DVD, accepted the disk name proposed by Windows, chose for the disk to be permanent rather than flash, and chose a burning speed of 4x. After 30 seconds I received a popup window with the following message:
�ST Service Scheduling has stopped working.�I ignored this message and did nothing, because often in the past when I have succeeded in burning DVDs with Windows 7's utility I have had this message appear, but if I do nothing I almost always have the burn proceed successfully. In this case, though, after another 10-20 seconds the Explorer window and burning-countdown window both closed, the DVD light went out, but the DVD continued whirring at high velocity. The DVD unit did not respond to my pushing the expel button by hand, and when I tried to expel the DVD using Explorer I only got an error message, so the DVD could be expelled only by shutting down the computer.When I turned the computer back on, I discovered that no files at all had been written to this DVD.below are the details from the ST Service Scheduling error message (in Italian, sorry). Whenever I get these ST Service Scheduling error messages I get them twice, i.e., after choosing �Close� one time the same message immediately appears again and I have to choose �Close� a second time.
Nome evento problema:APPCRASH
Nome applicazione:STService.exe
Versione applicazione:1.0.0.64
Timestamp applicazione:4ae02c43
[code]....
my dvd drive will not play dvds or cds and will not even recognize them in the drive. i have reinstalled the drivers but it didn't help and it says on properties tab that this device is working properly. my laptop is an asus a54c and only 4 months old. my dvdrw properties are dvd a ds8a8sh dvd/cd-rom drive.
View 1 Replies View RelatedI am having problems with my DVD's Registering can anyone help me it work initially now all of the sudden it doesn't work.
View 2 Replies View RelatedI know there is a way to connect my laptop to the TV to watch DVDs but do not have a clue what hardware and/or software is need it.The TV is a Panasonic HD 1080, 42".
View 3 Replies View Relatedit doesn't matter if I use a third party program or the W/7 burn image feature to burn an iso, I end up with a dvd that has written data that can't be seen in explorer. All I can see in explorer is "files ready to be written to the disc > desktop."
The desktop file is [.ShellClassInfo]
LocalizedResourceName=@%SystemRoot%system32shell32.dll,-21815
If I try to burn that file it says "no files [staged] to burn"
I've tried different dvd's including Vertbatim, but all have been +RW.
Verify disk confirms the data is burnt and closing the disk does not make any difference....the files can't been seen.
Optical drive = LG H20L (with latest firmware)
Edit....the files I'm burning should be visible, but in any case I've got "shown hidden files, folder & drives" selected in folder options.
I joined Bleeping computers yesterday and today I downloaded 'Autoruns' after reading some posts on the forums,and now I find (ho-hum) I dont know how to run the program,ive unzipped it and its 'ready' but I just cant see the run/start button?can someone point me in the right direction
View 14 Replies View RelatedI have problem with Windows 7 on PC computer. IT runs slowly even i turn on clasic view and turned off all effects..
WIndows installed on Sata HDD 40GB, in system there is more two HDD with 160GB and 250GB
IT runs more slowly than Windows XP before...
I thinks it could be few possibilities:
1. Previous widows xp were installed on drive D (in the same sata hdd) and when installed windows 7 on C (in the same hdd) it shows me (when boots) one more selection to choose one more OS, but when I select it nothing happens just black window and I need to reset pc and choose windows 7 to boot. Maybe this issue can be fault?
2. My Sata HDD is very old. Maybe there is problem?
3. Maybe there is old RAM's and old CPU with MB ?
Windows 7 is officiall beta release from microsoft...
In example on my HP laptop with Centrino and 1GB RAM runs perfectly with pre-beta release installed earlier. Runs default without any modifications like turning effects or smth.
My problem is, I have recently installed Windows 7 X64. I had already backed up my files up about a month earlier using nero 7. Nero 7 installed but not properly and would not restore my files. I uninstalled Nero 7 and loaded trial version of Nero 12. It also would not restore my files. I would love to have all my files back but my main concern is my picture files.
View 14 Replies View RelatedI have downloaded the Windows 8 ISO and its size is 2.52 GB But all the DVDs here in Egypt at the area where I live is crap, they sell PRINCO DVDs and it has 4.7 GB / 120 Min on it but when I insert it into the drive, it reads 1.31 GB. Very strange!!
In this case, can I split the ISO Image and make the Windows 8 into two 2 separate DVDs? If so, how will the installation look like when I install the Windows using 2 DVDs?
I have been running W7 on this box since W7 came out. I use the TV tuner, Dvdfab, play movies, rip cd's and to this point haven't really had any problems. About 2 weeks ago I was unable to open a movie to use DVDFab to copy it. DVDFab had expried. I did upgrade to the latest version, but that didnt help. Then I tried playing a CD. CD will not play. WMP just sits at the blue circle. Sometimes it will recognize the cd and songs, but no music.Only physical cds and dvds. Same problem if you try and play them from WMC.
View 1 Replies View Relatedwhat are the problems in my windows 7 ultimate? torrent files can not be downloaded. system says it, that it can not be downloaded due to some error. microsoft office can not be installed or uninstalled! even with the use of revo!!-uninstaller. my audio system is gone. i can not listen anything. if i open control panel, i can not click and open the subfolders! (it is high chance with other folder may be), but if i navigate from the search box, i can go to next level. how ever i can browse internet smoothly. i can watch Internet videos and other videos but i can not hear the sounds.
View 2 Replies View RelatedI don't know whether the Windows 7 forums are the right place for this question, but I hope someone can redirect me.
I have about 150 DVDs which back up my photographs. They were burned between 2003 and early 2009 in Win XP Pro x86, using Nero v.5. They were burned as data discs, not photo discs. The files are almost all in TIF, PSD or Camera Raw format.
I can read them (i.e. open them in Photoshop) in my XP computer. I can read them in Windows 7 x86 in a VMWare virtual machine. But I can't read them in Windows 7 x64.
The drive is a Pioneer DVR-216DBK, and I've installed the latest firmware. It isn't malfunctioning: I can install programs from DVDs/CDs, and I can write DVDs/CDs.
Searching on-line I found a program named Iso Burner, from which I can slowly and laboriously 'run' individual files (i.e. open them in PS), but I need to be able to see the contents in Bridge.
Can I do this if I:
a) buy a DVD drive that supports older formats, or
b) move the DVD drive that wrote the discs to my Windows 7 machine, or
c) download drivers from....?, or
d) buy the latest version of Nero (which I hoped to avoid; I hardly use DVDs for backup any more)
Has anyone else experianced this problem of crashing when they are converting avi files to dvd? im using win avi converter version 8 and the latest convertX to dvd progam which i have just updated.
still getting to grips with windows 7 its the beta version im using i have to say i like it and everything else has been fine its just that sometimes i get these crashes when converting films? it only seems to happen on the 2nd or 3rd film the first one always converts and burns fine?
motherboard = gigabyte gak8nxpsli
cpu = amd 3800 + dual core
graphics card = nvidia 8800 gt
4gb ram
My DVD rom drive will not read dvds or dvd software but it will play cds, This has happened before to me but I was able to call someone, It happened after I Uninstalled Norton and I had to remove a key and restart the laptop up and it worked, But I cannot remember for the life of me on how to do it again, I Uninstalled Avg then reinstalled it since then my drive hasn't been playing dvds just cds. I know This is probably the same as what has happened before, I know I have to go into regedit but not sure where to go after that
View 3 Replies View Related
