Get MAC Address Through Recovery Dvds Of Windows 7 Professional?
Aug 27, 2012
My Laptop Notebook was stolen recently. It was VAIO/EA2/GX. I had made it's recovery discs before stealing. It's os was 7 prof x64. So i have recovery dvds now. I want to get it's MAC address through those recovery dvds. how to get my laptop MAC address through its recovery dvds?
View 1 Replies
ADVERTISEMENT
Nov 19, 2011
I've been using a HP pavillion dv6 3043TX, with a samsung hard disk, and built-in win.7 home premium and due to power short prob i was recommended by HP to create recovery DVDs (5 discs) and replace it. Now Ive replaced it with a 'seagste' of 450 gb capacity. A friend has installed a version of windows 7 ultimate with partitions. BUT i want to use the original pack i have recovered with all the HP tools and partition.
View 3 Replies
View Related
Oct 15, 2011
I have just bought HP pavilion G6 notebook. It came with pre-installed Genuine Windows 7 Home Premium 64bit, recovery disk of 14 gb and C: Hard drive of 451 gb.
I have made 3 recovery disks(DVDS) using "Recovery Media creation". I Want to Reinstall Windows 7 because 1)want to get rid of recovery disk of 14gb. 2)want to do partition because without partition my system is really slow.
I want to reinstall Windows 7 using these 3 DVDs.
View 5 Replies
View Related
Jun 8, 2011
Purchased new Acer Veriton VM498G-Ui3550W computer. When trying to create back-up DVD's, system claims that the DVD's aren't formatted and asks to format them. When formatting is ok'ed, the computer works for a while and then states that formatting failed. I have the same results when trying DVD-R, DVD+R, and DVD+R/W discs.
Acer has given me two sets of instructions on how to creaate recovery disks, but both instruct me to launch programs that don't show up on my "Start - All Programs" menu.Acer has offered to send me recovery disks, but I am concerned why the machine will not make them.I did place recovery files (successfully ?) into the data partition of the hard drive, but this will be of no use with a hard drive failure.
View 1 Replies
View Related
Jan 15, 2013
i have 3 dvds recovery how can ia maove them to usb drive
View 4 Replies
View Related
Feb 15, 2012
I have a HP Pavilion dv6 3170se i7 intel processor.I want to create a DVD from the Recovery Manger program, but the option is not available, it wont let me press it. alternative way to restore the laptop to its factory settings.Currently running Windws 7 ultimate x64.
View 9 Replies
View Related
Jan 7, 2013
I've created the recovery DVDs, but unbeknown to me at the time - you're only allowed to create one set. What i'd like is to put this onto a USB stick.Currently i have:DVD #1 - Boot Media: (312mb)The boot DVD containing "BOOT" folder, BootMgr file which is quite small & Winre.Wim at about 300mb.DVD #2 - Data DVD #1: (4.03GB)factory recovery folder, recovery folder & Autorun fileDVD #3 - Data DVD #2: (3.87GB)factory recovery folder & recovery folder (NO autorun file)DVD #4 - Data DVD #3: (3.04GB)factory recovery folder, recovery folder, LenovoQDrive file, qdrive icon file.My USB stick is 16GB capacity.So basically i'd like to make the USB stick the recovery media. I can't do this from the laptop as Lenovo only let you create one ......... so how can i do this
View 9 Replies
View Related
Mar 10, 2011
Am buying a new computer with Windows 7 professional installed. Have MS Office Professional 07 on old computer which died. Will MS give me another product key so I can install MS Office Professional 07 on new computer? Will I need install additional drivers?
View 3 Replies
View Related
Jul 7, 2012
My internet connection shows 'no internet access' even though my ISP shows the connection is coming into the house just fine. I usually use a router (NetGear-WNR3500U) but I right now I have the Ethernet connection plugged directly into my PC. I tried directly plugging into my laptop and the internet works just fine. So I know the problem resides in the PC.
Some troubleshooting things I have tried.
-Power cycled my modem, router and PC.
-Repinged my connection from my ISP(Comcast Xfinity)
-Used the reset option on the router and the modem
-I was walked through the internet options needed with the tech support from my ISP to make sure DHCP was enabled and every other setting was correct, and he cleared me that all settings were correct.
-Tried ipconfig commands to /renew and /release my IP When I tried ipconfig /renew I get the error 'An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server'
-Restored my PC to a restore point where the Internet was working
All of these options did not work.
What I think the problem is and I am not sure how to fix it, when I run the ipconfig /all command my Auto configuration IPv4 Address shows 169.254.112.76 which I was told is a router IP address even though I am plugged directly from the modem to my PC with an Ethernet cord. So I think that's my problem? But I am not sure.
View 4 Replies
View Related
Apr 24, 2011
Having problems exporting my comcast address book to windows live mail address book,Also tyied exporting address book from plaxo without success, please help!
View 1 Replies
View Related
Mar 2, 2012
I have downloaded the Windows 8 ISO and its size is 2.52 GB But all the DVDs here in Egypt at the area where I live is crap, they sell PRINCO DVDs and it has 4.7 GB / 120 Min on it but when I insert it into the drive, it reads 1.31 GB. Very strange!!
In this case, can I split the ISO Image and make the Windows 8 into two 2 separate DVDs? If so, how will the installation look like when I install the Windows using 2 DVDs?
View 8 Replies
View Related
Dec 29, 2012
I am having problems with Windows Media Center being recognized in my computer...I am having to use an external disc player to play dvd's. Cd's play fine, I am able to use my built in disc drive (in the tower/box), but I have no idea as to why it has stopped recognizing dvd's and not allowing Windows Media Center to play them, it used to. I can use Windows Media Player for ripping an burning music, etc. but not WMC!
View 9 Replies
View Related
Apr 16, 2011
I cannot get dvds to play in my windows. I have downloaded video by camcorder but have never been able to by dvd into the c drive.
View 2 Replies
View Related
Oct 30, 2012
RW-DVDs created with Windows XP won't open on Windows 7. They appear as a blank DVD. Why is this?
View 2 Replies
View Related
Feb 3, 2013
I have checked my DELL Latitude 6500 laptop running WinXP Pro using the Windows 7 upgrade advisor tool, and everythihng is a go. I also know that I need to do a good backup of my critical files and the pictures I want to keep.I have had many people tell me that before I make such a change in operating systems, do a backup first, because Windows 7 requires a clean startup, because there is no upgrade from XP to Win7.Is there an easy way to keep these work related files, and .jpg pictures using a simpler backup process than the software backup program called Acronis?I have also read that there is a program that will run at the same time as Windows 7, like a separate operating system called XP Mode. As I understand it, XP mode runs in a separate window on the Windows 7 desktop, much like a program, except it's a fully functional version of Windows XP. In Windows XP Mode, I think you can also access your computer's CD/DVD drive, install programs, save files, and perform other tasks as if you were using a computer running Windows XP.I am not sure Acronis can be installed on this DELL Out-of-Warranty Win XP laptop, if I am currently using it for my desktop with Win 7 Ultimate. Once the critical files and .jpg photos are saved on an external hard drive, can I bring them back onto the laptop on the same harddrive with the new operating system Win 7 files, or do I need to partition the laptop harddrive, or does it matter if I use them with Win XP Mode?
View 18 Replies
View Related
Aug 28, 2011
I tried to do a Repair Install following this tutorial, but the Compatibility Report says:"Windows 7 Professional cannot be upgraded to Windows 7 Professional. You can choose to install a new copy of Windows 7 Professional instead, but this is different from an upgrade, and does not keep your files, settings, and programs. You'll need to reinstall any programs using the original installation discs or files. To save your files before installing Windows, back them up to an external location such as a CD, DVD, or external hard drive. To install a new copy of Windows 7 Professional, click the Back button in the upper left-hand corner, and select "Custom (advanced)"." I have Win 7 SP1, but only a Win 7 disc without SP1.
View 6 Replies
View Related
Oct 17, 2012
i am rather excited I am doing a downgrade from Windows 7 Professional OS to Windows XP SP2. The machine i am doing the downgrade is an HP 500B MT, I am using the HP Restore Plus DVD that came with the machine as well as the Operating System CD. I started the setup yesterday and it seems to be taking forever!
View 4 Replies
View Related
Dec 31, 2012
i want to change mac address and ip address on acer apire win 7
View 4 Replies
View Related
Oct 4, 2010
Just built my new computer but realized that I can't use the same Windows 7 disc/cd-key that's on my old computer because it's only one per computer when I thought it was 3.Looking at the prices on the Windows 7, it costs $119 for upgrade and $200 for full retail. From what I have read, when installing using the upgrade disc, it would detect my previous Windows version and if it's older than XP, or if there's no Windows installed, it would not activate Windows as it isn't a proper license and I would need the full retail one.
View 5 Replies
View Related
Sep 1, 2011
Finally got through my first day with Windows 7, must say it does get easier. I'm trying to get the programs onto my new system that I ran using XP. I've been using Nero 6 on my XP system, anything in the new Windows 7 that can burn CDs and DVDs or should I try and download Nero 6 if it works with a 64 bit system?
View 3 Replies
View Related
Dec 6, 2011
I have a strange problem when playing DVDs in my PC running Windows 7 (32-bit). The problem is that whenever I play any DVD in any player of my choice, the OS Crashes and shows a BSOD every time I try to play DVDs in my PC. My PC has got Intel i865G Chipset with the built-in Intel 82865G GPU. I can't live without watching DVDs! I do have a DVD Player to watch them on my TV, but watching them on my PC is better for me.
View 9 Replies
View Related
Oct 29, 2011
windows 7 compaq labtop computer won't play dvds?
View 1 Replies
View Related
Nov 13, 2011
Recently my disk drive has been playing only audio cds and not dvds or game cds. I have used my disk drive cleaner ers are all updated and my devices are working properly. When I place a dvd or game cd in it, it makes the dreaded clicking sounds, then stops, then says "insert a disk in drive F." My computer has two devices:
Hitachi HTS725025A9A364 SATA Disk Device: CdRom Device
View 1 Replies
View Related
Jul 4, 2012
All my defaults are set as far as being able to play my CDs and DVDs are concerned, but neither iTunes nor Windows media will play them.
View 8 Replies
View Related
Oct 8, 2011
Can Acer windows 7 DVDs be installed on a E1705 Dell Computer? 32 bit
View 4 Replies
View Related
Dec 25, 2012
I have Unallocated space at the very end of my hard drive, even after the 25gb Recovery Partition, this is due to copying my old hard drive onto this new one via Clonezilla, and it automatically keeping the unallocated space at the end. Can I either move the unallocated space around the Recovery Partition, or delete the Recovery Partition altogether? Sorry if I am being a little unclear.
View 4 Replies
View Related
Jun 23, 2012
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
View 4 Replies
View Related
Apr 16, 2012
my dvd drive will not play dvds or cds and will not even recognize them in the drive. i have reinstalled the drivers but it didn't help and it says on properties tab that this device is working properly. my laptop is an asus a54c and only 4 months old. my dvdrw properties are dvd a ds8a8sh dvd/cd-rom drive.
View 1 Replies
View Related
Feb 28, 2009
I am having problems with my DVD's Registering can anyone help me it work initially now all of the sudden it doesn't work.
View 2 Replies
View Related
Dec 8, 2011
I know there is a way to connect my laptop to the TV to watch DVDs but do not have a clue what hardware and/or software is need it.The TV is a Panasonic HD 1080, 42".
View 3 Replies
View Related
May 16, 2009
it doesn't matter if I use a third party program or the W/7 burn image feature to burn an iso, I end up with a dvd that has written data that can't be seen in explorer. All I can see in explorer is "files ready to be written to the disc > desktop."
The desktop file is [.ShellClassInfo]
LocalizedResourceName=@%SystemRoot%system32shell32.dll,-21815
If I try to burn that file it says "no files [staged] to burn"
I've tried different dvd's including Vertbatim, but all have been +RW.
Verify disk confirms the data is burnt and closing the disk does not make any difference....the files can't been seen.
Optical drive = LG H20L (with latest firmware)
Edit....the files I'm burning should be visible, but in any case I've got "shown hidden files, folder & drives" selected in folder options.
View 1 Replies
View Related