Windows 7 Upgrade Disk Not Read In DVD Drive, Running Vista X32
May 28, 2012
I just purchased Windows 7 Home Premium to upgrade it from Windows Vista Home Premium, and when I popped in the disc, it does not show up! I tried a different disk, and yes it worked. I also tried putting the Windows 7 disk into my friends computer, and it showed up. I have tried many different things, and nothing works. I've tried re installing the driver, updating it, and several different fixing programs.
I ordered the 50$ Windows 7 upgrade disk. I realize that Windows 7 will need vista or XP already installed for the upgrade version of Windows 7. But if I want to upgrade my Vista 32-bit to Windows 7 64-bit, Will I be able to do it with this upgrade disk? after all I will need a fresh install (because 32 to 64) and this is the upgrade version...
my dvd drive wont read any disks, im running windows 7 64 bit, i have tried the options below but still no luck i have had a search on here and tried this to fix it:
- execute regedit - search the key HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlClass{4D36E965-E325-11CE-BFC1-08002BE10318} - delete Upperfilter and lowerfilter entries. - Reboot your system.
there was no upper-filter or lower filters to delete, i have also had a look in properties and it says the dvd drive is working fine,iv tried to uninstall it and restart still have the same problem?
Upgraded from win xp to win pro 7 32 bit. I have two hitachi drives that I mirror using casper xp. Saved my old config with xp on drive H. Now, in windows 7, I can see drive H, but get error not accessible.
Can i run my Asus oem win7 upgrade disk to install win7 on my dell machine? My asus c-mos crashed because of a factory defect before i installed it so now im left with the disk.
Right now I will upgrade my Vista laptop to Windows 7 . I already did it before with the RC and worked great.
Anyways there are certain functions on my laptop I use . So that's why I didn't do a clean install. But if there is any problem and I need to reinstall windows. I will have to install Vista first . Till SP1 is the best I believe and then again Windows 7 .
A big hassle if you ask me?
Is there a way to make a boot-able DVD or something of my laptop once I upgraded to windows 7 and I take kind of a snapshot of that moment.
or something else'
Like when i got my laptop I had to make 2 DVD's so I could reinstall windows. Was hoping I could do the same with Windows7 somehow.
Another thing is. I have an English Windows Vista on a machine but will get a Dutch windows 7 upgrade. I don't think I can upgrade from a English to Dutch right? Although the upgrade is Ultimate?
I also can install an English version of Ultimate and use the key from the Dutch ultimate? or is the key from the box really only for the DVD that's in the box ?
I have a Dell desktop with windows vista 32 bit on it but only have a 'reinstallation' disk. Is there a way to install windows 7 64 bit upgrade (yes, hardware will support the 64 bit) even though I only have the 'reinstallation' disk....or am I hosed and will have to buy the full install version of Windows 7?
I cant burn dvds on my hp dv7. I use Win 7 64 bit Home Standard edition. I have owned this computer 3 years now and since my free upgrade from Vista to Win 7 the problem has existed. As far as I can tell the filter trick only works for one or two of these machines, and will only really help the problem when it first manifests itself with burning issues. One day your filters will just break in the registry, and at this point the problem becomes unsolvable, even by changing out hardware, or uninstalling and reinstalling old hardware. It would be nice if someone other than Microsoft or HP would look into this or that said companies would make a real effort to figure out if the problem is an interaction between the firmware and the registry or the driver cache and the registry. I fix networks and computers for a living, and am working on my BSIS in Technology Management?
Originally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.
I have an Acer Aspire One Happy and have got this message:
"A disk read error occurred Press Ctrl+Alt+Del to restart"
I have been searching for solutions all day but I can't do any of the options described. Pressing f8 to enter safe mode does nothing, nor does alt+f10. I also don't have a cd drive as its just a netbook and no recovery cd came with it even if I did have a portable one. Anyone have any ideas? I'm on a boat in the Arctic for the next month and without my laptop I will likely jump off an iceberg!
My laptop does not read my new external hard disk drive using USB connection. The sign "Safely remove hardware and eject media" is there. But the icon of the hard drive doesn't appear in the "Computer".
Computer is a Sony Vaio VGC-RC110G (not sure about motherboard). About 3 weeks ago computer starts refusing to boot giving errors that make me think the hard drive is bad. Computer will still occasionally boot after 5-10 tries. I bought a new hard drive and tried to create an image of the old drive onto the new using Clonezilla, the process gave a few errors. The computer flatly refused to boot from the new drive (gave disk read errors). However, when I could boot using the old drive, I could get in and explore the image of the new drive and the image copy process seemed to have worked okay.
As part of the disk image copy process, my new drive had 2 partitions and about 900 megs of free space. The two partitions were the main windows partition from the old drive and the recovery partition. I combined all partitions and formatted the new drive (using Gparted) because I thought that the disk image copy probably just recreated errors in the old drive onto the new. After the format, my computer then consistently refused to boot from either drive. (in the past I could boot to the old drive after a couple of tries). The error was usually "a disk read error occurred' or "BOOTMGR is missing."
Attempts to install windows using windows install DVD failed because computer couldn't write to the new hard drive. Both hard drives would usually appear in bios when I entered into it (I know at least one time where neither appeared in the bios), although sometimes computer would fail allow me to edit bios altogether. I attached the new hard drive to a different computer and installed a clean version of windows 7 Ultimate x86 to the new drive. The different computer boots just fine from the new hard drive. But when I move the new hard drive to back to the old computer I consistently now get "a disk read error occurred" error.
I don't believe it is a SATA cable issue because power to drive seems to be fine and I had to use the SATA cable from the old computer when hooking the drive up to the different and it worked fine. Also, Gparted recognizes the drive just fine and has no problems formatting partitions etc., so there is communication happening through the SATA cable and the power cable is powering adequately.TL;DR summary: New hard drive works fine with new computer, but old computer (when connected to same new hard drive) gives me a "disk read error occurred." Based on the evidence, I don't think it's a faulty drive issue. I'm also skeptical that it's a cable issue, but haven't 100% ruled out this possibility. What should I do next in terms of identifying the problem? I've currently exhausted my (admittedly limited) hardware troubleshooting .expertise.
I managed to fix the cd/dvd drive at first and now it reads cd/dvd with something stored in it. However my problem comes when I try to burn something on blank disk. My computer( dell dimension e521) wont read the blank disk at all.
* I tried the Upper and Lower filter and cleaned the disk lens and saw that all SATA cable are good.
Per microsoft I need to do try a repair install from original disk. Is there a difference between running repair install from Windows or booting from original disk then selecting upgrade install? Is one or the other preferred? Directions say both attempt to preserve installed programs, but not all drivers, and both require reinstalling all the 60 or so windows updates released after my disk. so no differences there.
And tips on how to do that, and is it even possible? I wanna get Windows 7 on my girlfriends computer, and they are not yet selling family licenses in my country (!!), so I was hoping I could upgrade her Win Vista to Windows 7 without having to do a clean format.
TLDR: I get the "A disk read error occurred" error but the system disk is readable and checks OK in the recovery USB. So, I have two hard drives--a terabyte drive with some data on it and a smaller drive with the Windows 7 installation on it--and a USB drive. I made the USB drive into a recovery USB using the instructions here Installing Windows 7 System Recovery into USB Flash Drive | Raymond.CC Blog with the addendum found in the comments. I made a system image of the smaller drive via the control panel and then put the image in the terabyte drive. I then replaced my smaller hard drive with a new drive of a comparable size.In order to restore the drive, I booted into the recovery USB, formatted the new hard drive with ntfs, made it active, and ran wbadmin start recovery -version:xxx -items:C: -itemtype:Volume -backupTarget:C: -recoveryTarget: where C was the terabyte drive and D is the new drive. I may have the drives mixed up here, but I assure you I had them correct when I actually ran the command
After a reset, I got some generic error so I went back into the bios, and set the new drive to be at the top of all boot lists, and then rebooted. It was at this time I got the above error. I feared that my drive was actually DOA, so I booted back into the recovery. I did a D:;dir and saw that all of my old files did indeed exist, so I figure it was a boot issue. I ran the boot repair utility in the recovery menu and it said there were no errors and I should restart. I didn't restart, and instead ran a chkdsk D: /f and found no errors. I did a bootsect /nt60 /all /mbr and restarted and still nothing changed. I even tried a "bcdedit /timeout 10" and I do not see the boot loader before getting this error. Not sure if that is expected or not but I'll throw that in here.
I have an old XP system that has died and i am building a new system to replace it. I'd like to use Win 7 on the new system meaning that the current XP software will be retired. I am purchasing new SATA HDDs and will not be using the ATA133 that has the XP installed.
If I understand correctly I can use an upgrade version of the Win 7 to perform a clean install on my new system. Correct? Any tutorials available on the process?
I am having major problems upgrading to Windows 7 from Vista. I have an HP dv3 with Windows Vista 64-bit. I am using the HP upgrade disc with the upgrade option. I first ran into problems when the Windows 7 disc told me that some components would not be installed properly, namely that I needed to upgrade my keyboard filter driver.
I did what I was told and when I tried to re-start the upgrade process the disc told me that I would need to re-start my computer. I did that and when it re-started, a message from HP popped up saying that my optical drive was no longer connected and that I needed to re-connect it in order for the upgrade to continue. So now my optical drive is not reading anything and I do not know what has happened or how to even fix it.
I currently have Win 7 Home 32 bit installed. I will be upgrading my system and using a new Sata hard drive.I would like to install my Win 7 retail upgrade disk [ the 64 bit version ] on the new drive.Can I do this? If so what would be the easiest way to retain all information from my current 32 bit drive?
i have a toshiba satellite C650 that has recently come up with a disk read error. I want to access the command prompt to try some potential solutions that I have read about on the internet. I have made a Windows 7 recovery disk using my other acer laptop which also has Windows 7 installed. When I use the recovery disk and it has loaded the files etc it just brings up a black screen and the cursor. I tried booting my acer laptop from the recovery disk and it worked fine. why I am getting the 'disk read error - hit ctrl, alt and delete to restart' message?
I am currently running windows Vista 32 with an Hd and decided to upgrade to a SSD with windows 7 professional 64GB using a clean install.
I have watched a few videos which suggest you just plug in your new Ssd, unplug the HD and boot windows from cd/DVD and install onto SSD. I tried this several times and every time it did not recognize the boot disk. If I plug my original HD in and reboot using the disk- it is able to recognize it and initiates the installation procedure. I am hoping to replace this HD so not sure how to get this to work.
I installed Win 7 RC on a new build and purchased Vista Home Premium 64bit OEM with upgrade to Win 7 Home premium. The Win 7 upgrade disc has arrived. I understand that Vista must be installed and activated for the upgrade to work. Attempts to install Vista with Win 7 RC running or booting from the Vista disc lead to error code 0x80070103, insufficient free space. My HDD has > 450 Gb free space in 2 partitions. Do I need to reformat the HDD in order to install Vista over Win 7?
Just built my new computer but realized that I can't use the same Windows 7 disc/cd-key that's on my old computer because it's only one per computer when I thought it was 3.Looking at the prices on the Windows 7, it costs $119 for upgrade and $200 for full retail. From what I have read, when installing using the upgrade disc, it would detect my previous Windows version and if it's older than XP, or if there's no Windows installed, it would not activate Windows as it isn't a proper license and I would need the full retail one.
I have recently installed 7 and made my Vista partition visible. However, I am unable to write to the partition. Ex) I am able to view a text file on the Vista partition while running 7, but I am not able to modify the text file. Etc with other files. Does anyone have a solution to this?
I'm trying to reformat my computer with the original windows 7 disk but i'm having issues. when i insert the disk and i go to "My Computer" it doesn't show up as a windows 7 disk and has no folders or files when i 'explore' it. i checked the device manager and it shows the dvd rom is working fine, i updated the driver anyways and it said it was already up to date. after i tried rebooting the computer and it doesn't give me the option to 'press any key to start disk' that it normally does. i went into bios and set it to where the dvd rom was first priority followed by the hard drive (nothing), then made it the only priority with all others disabled. it then said "insert disk and press enter", i pulled the disk out then put it back in but it won't boot. i made sure the disk drive was working by inserting another disk in it and it worked fine and booted up and everything. then i tried putting the windows 7 disk into another computer i have and it also booted up normally and worked fine.
I am about to install Windows 7 64 bit on a new-build PC, so it will be a new install and on a new formatted hard drive. I have three other hard drives on which all the program and other files were created under Vista 32 bit. I know I can transfer the files which are installed on my Vista boot hard drive using Windows Easy Transfer, but when I am running Windows 7 will it recognise all the programs and files on the existing drives if I just leave them there?
I recently installed Win 7 on a second Hard drive. Is it possible to run the programs I had installed on the Vista Hard drive? Both are HD's are still installed.
