I'm trying to reformat my computer with the original windows 7 disk but i'm having issues. when i insert the disk and i go to "My Computer" it doesn't show up as a windows 7 disk and has no folders or files when i 'explore' it. i checked the device manager and it shows the dvd rom is working fine, i updated the driver anyways and it said it was already up to date. after i tried rebooting the computer and it doesn't give me the option to 'press any key to start disk' that it normally does. i went into bios and set it to where the dvd rom was first priority followed by the hard drive (nothing), then made it the only priority with all others disabled. it then said "insert disk and press enter", i pulled the disk out then put it back in but it won't boot. i made sure the disk drive was working by inserting another disk in it and it worked fine and booted up and everything. then i tried putting the windows 7 disk into another computer i have and it also booted up normally and worked fine.
im trying to install windows on my freinds computer its a home build one its a k8m800micro am2 board anyway i blew it out and i forgot that it had a problem before not reading any disk. when i tried to put windows in it it says "insert disk and hit enter" something like that.
TLDR: I get the "A disk read error occurred" error but the system disk is readable and checks OK in the recovery USB. So, I have two hard drives--a terabyte drive with some data on it and a smaller drive with the Windows 7 installation on it--and a USB drive. I made the USB drive into a recovery USB using the instructions here Installing Windows 7 System Recovery into USB Flash Drive | Raymond.CC Blog with the addendum found in the comments. I made a system image of the smaller drive via the control panel and then put the image in the terabyte drive. I then replaced my smaller hard drive with a new drive of a comparable size.In order to restore the drive, I booted into the recovery USB, formatted the new hard drive with ntfs, made it active, and ran wbadmin start recovery -version:xxx -items:C: -itemtype:Volume -backupTarget:C: -recoveryTarget: where C was the terabyte drive and D is the new drive. I may have the drives mixed up here, but I assure you I had them correct when I actually ran the command
After a reset, I got some generic error so I went back into the bios, and set the new drive to be at the top of all boot lists, and then rebooted. It was at this time I got the above error. I feared that my drive was actually DOA, so I booted back into the recovery. I did a D:;dir and saw that all of my old files did indeed exist, so I figure it was a boot issue. I ran the boot repair utility in the recovery menu and it said there were no errors and I should restart. I didn't restart, and instead ran a chkdsk D: /f and found no errors. I did a bootsect /nt60 /all /mbr and restarted and still nothing changed. I even tried a "bcdedit /timeout 10" and I do not see the boot loader before getting this error. Not sure if that is expected or not but I'll throw that in here.
i have a toshiba satellite C650 that has recently come up with a disk read error. I want to access the command prompt to try some potential solutions that I have read about on the internet. I have made a Windows 7 recovery disk using my other acer laptop which also has Windows 7 installed. When I use the recovery disk and it has loaded the files etc it just brings up a black screen and the cursor. I tried booting my acer laptop from the recovery disk and it worked fine. why I am getting the 'disk read error - hit ctrl, alt and delete to restart' message?
I am currently running windows Vista 32 with an Hd and decided to upgrade to a SSD with windows 7 professional 64GB using a clean install.
I have watched a few videos which suggest you just plug in your new Ssd, unplug the HD and boot windows from cd/DVD and install onto SSD. I tried this several times and every time it did not recognize the boot disk. If I plug my original HD in and reboot using the disk- it is able to recognize it and initiates the installation procedure. I am hoping to replace this HD so not sure how to get this to work.
My computer stopped working I keep getting an error message saying "disk read error", anyway I put the disk in an external case and connected to my laptop and my and it started ok so I could see all the data etc, anyway I bought a new hdd and put it in my desktop and tried to install a new copy of windows 7, but now when I go into my boot section there is no sign of my CD drive, only the hdd and the floppy disk drive shows up, so I am now stuck as to what to do?
My computer was working completely fine and I went to restart it and it wouldn't go anywhere after the boot scree just a read disk error. I restored my bios settings to default and still no luck. I then put in a windows 7 disk and went to repairs and did a start up repair got a harddrive error 0x0. When I go to look in my computer when I click browse, I can see my other hard drive, but my main one is still there but and no info. When I click on it, it asks if I want to format it. There are lot of important files I cannot lose.
I turned on my Sony vaio laptop and it got stuck on the Starting Windows splash screen. I tried to boot in safe mode but it loaded a bunch of files and then just stopped and never went to safe mode. I tried the system repair but after nearly 14 hours that didn't work either. System restore, scannow and chk dsk didn't work as well. Now I'm trying to reinstall Windows but it says disk read error and it won't load any further.
that the system doesn't recognize the Sata HDD on which Windows 7 is installed. I first thought the the HDD was done, because the system recovery couldn't be started and every action was followed with "disk read error". The next step I took was booting with Ubuntu live and there was the surprise, Ubuntu recognized the HDD and all the folders were there, so it seems the problem is not with the HDD but with the OS. What next step should I take
Wasn't sure whether I should put this in WIndows 8 discussion or WIndows 7, butconsidering it's going from eight to seven, it would be more relevant to go into seven, especially since I think I've cleared eight almost entirely from the machine, but I'll explain that later. Also excuse my English right now, I've been awake for.... well longer than twenty four hours, so my mind is a bit scrambled and I'd just like the peace of mind of having this up here before I head off to sleep.
Well anyways, it feels a bit impolite to show up with nothing but a problem to present, so I'll make it a point to at least present myself. I've found this site many a times when dealing with viruses and other such problems through Google search results. I had noted what a great site this was, from the generally friendly people to the fact that anytime I would find a thread here pertaining to my problem, it would either be solved here or I would be pushed pretty drastically in the right direction. This was always my "go to" place if I ever really had a problem I needed worked out that I couldn't figure out myself. As you've already guessed, that's why I'm here in the first place.
So to sum it up shortly my friend had asked me to revert his new Windows 8 laptop back to the Windows 7 interface, me knowing more than him enough for him to trust me with it.However, I'm no IT, I'm just someone who happens to have picked up knowlege over the years from dealing with my own problems and such. It didn't seem to be an IT job, so I felt it was within my league. First thing I do is fish out the WIndows 7 installation disk. After fiddling with Windows 8 for a while trying to figure out how to boot from disk (is it just me or did Windows 8 overcomplicate that way too much?), I managed to get to the boot order settings. However, the CD drive was entirely gone from there. I assumed it was something involving the new laptop and not having the proper drivers installed or something, so I followed through a guide and got it all onto a flash drive so I could boot from that instead of dealing with the phantom CD drive this laptop seemed to have.
One step done, I felt I was heading in the right direction. However, things began taking a turn for the worst when for whatever reason it wouldn't load from the flash drive. It was recognized at least, and there was a noticable pause at start up where the light on the flash drive began blinking frantically as if it's trying to do something, but then it just skipped over to the regular Windows 8 log on screen. I tried just about all the basic troublshooting steps under the sun here, different USB slots, formatting the drive and cleanly setting it up to be a boot disk a few more times, changing the boot order again, etc. I started poking around online for solutions, and, well my fatigued brain is having a bit of a hard time remembering if I did anything other than this, but if I did I know I wasn't just poking at random switches and such in the BIOS, even I realize the danger of that and all, and if there was something other than this I know that it was only one other thing, which I suspect is what actually made it work. Now for the big delivery, MISTAKE #1 : There was a setting somewhere in there that I changed, I'm guessing I misread what was said online, but I changed it from UEFI, to CSM.
Saved changes and restarted. Booted fine from the flash drive and I was pretty happy, until the partitions read "Windows cannot be installed to this disk, The selected disk is of the GPT partition style" Now here's where I started to panic. So much so I engagued into big mistake #2. I deleted the partition containing Windows 8 and tried to make a new one for 7. That would work right? It would build the next partition to fit what Windows 7 needs to install right? Not the case, still remained with the GPT error on the newly made partition. So here I am, with a Windows 7 that refuses to install, and when I load it normally I get this wonderful screen[CODE]
I just purchased Windows 7 Home Premium to upgrade it from Windows Vista Home Premium, and when I popped in the disc, it does not show up! I tried a different disk, and yes it worked. I also tried putting the Windows 7 disk into my friends computer, and it showed up. I have tried many different things, and nothing works. I've tried re installing the driver, updating it, and several different fixing programs.
"A disk read error occurred press ctrl alt del to restart windows 7" Above statement is the problem in my system.This appears when the system is booting. How can i repair my system?
Disk read error ctrl+alt+dlt to restart your system.
1. Have sony vaio E-series vpcea23en 2. Fail to load windows 7 3. Even recovery dvd stop to load 4. No option in bios to run diagnostics. 5. Try to install windows 7 64bit clean install but also failed to load it. 6. Have no money for new hdd. 7. How can I format my laptop. full
Originally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.
I was luckily enough to get a Beta key to a very special game that is close to my heart but now when I was downloading the client after maybe 50%-80% I get this error:
Fatal Error: Disk read failed (incomplete).
And after some research( Not so helping a I thought ) I am totally clueless about what I am going to do. Some say that it would help if I removed the read only on the file it would help but every time I uncheck the box it rechecks again.
I cant burn dvds on my hp dv7. I use Win 7 64 bit Home Standard edition. I have owned this computer 3 years now and since my free upgrade from Vista to Win 7 the problem has existed. As far as I can tell the filter trick only works for one or two of these machines, and will only really help the problem when it first manifests itself with burning issues. One day your filters will just break in the registry, and at this point the problem becomes unsolvable, even by changing out hardware, or uninstalling and reinstalling old hardware. It would be nice if someone other than Microsoft or HP would look into this or that said companies would make a real effort to figure out if the problem is an interaction between the firmware and the registry or the driver cache and the registry. I fix networks and computers for a living, and am working on my BSIS in Technology Management?
I have an Acer Aspire One Happy and have got this message:
"A disk read error occurred Press Ctrl+Alt+Del to restart"
I have been searching for solutions all day but I can't do any of the options described. Pressing f8 to enter safe mode does nothing, nor does alt+f10. I also don't have a cd drive as its just a netbook and no recovery cd came with it even if I did have a portable one. Anyone have any ideas? I'm on a boat in the Arctic for the next month and without my laptop I will likely jump off an iceberg!
Every time i boot my computer i receive this message, after several restarts my system will load up the windows, n i can use my PC,,, n if i turn on the Pc after some hours same error message again.. have restart my system several times to get it work... What's the problem here... i think it's not hardware problem if it was it wouldn't have booted up my OS after several restarts... Is this something gotta do with registry, after messing with registry i have started to get this message, Is re-installing my Operating System only the solutions.
I've been having trouble with Oblivion for awhile now and wanted to reinstall. The game used to run fine, but recently the disc was having trouble being read and now will not register with my computer at all. This issue is unique to my computer (the disc works fine for others) and my other games are running in top shape.
What's more, I cannot uninstall the game from my computer using the prompt in the loading menu, as I get an error message saying "Oblivion Launcher cannot find the uninstall program. Run Setup.exe on the install disc to uninstall." The Add/Remove programs in my control panel does nothing, though I can still run uninstallation of the official added content (Orrery, Vile Lair, etc.).
I am currently running no mods on Oblivion. I planned to use Revo Uninstaller Pro, but my free 30 days has run out and I can't afford the program. How does one uninstall a program that cannot be uninstalled using a disc that cannot be read?
I have a 1TB Seagate external drive connected to my computer. When I start the computer I get a Disk Read Error. If I disconnect the external drive, Windows 7 loads properly. Apparently, my system is trying to load Windows from the external drive.
So, how can I get my computer to ignore the external hard drive at start up and load Windows from my C drive (as it always did on my old XP machine)?
I have been using Windows 7 7100 for about a month or so now. I was using my computer like usual, nothing out of the ordinary, when it started running very slowly. I rebooted the machine, and got this message:
DISK FAILURE, INSERT SYSTEM DISK THEN PRESS ENTER.
I did that, and got this:
"Windows has encountered a problem communicating with a device connected to your computer.
This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable storage is properly connected and then restart your computer.
If you continue to receive this error message, contact the hardware manufacturer.
Status: Oxc00000e9
Info: An unexpected I/O error has occurred. "
After that, I went on to run startup repair. I fixed it, went on to using my computer until the same thing happened again. I did the same process I did above, but the power went out while it was repairing, and the computer shut off. When I started it up again, I got:
A Disk Read Error Has Occurred.
Press Ctrl+Alt+Del to restart.
I can't get past this point. I would really love to save the data I have on there. Is there anything I can do to fix this problem?
So, about 2 weeks or so ago my PC was working perfect, no issues whatsoever. Then about 2 - 3 days after I went on my PC and things just froze up, I couldn't shut down properly because it was just stuck froze. So I shut down using the button, but when I turned it back on I got "Disk Read Error Occurred". So I left my PC off for a while and it worked again after a few restarts, but it seems to keep coming back, my PC also sometimes freezes up.
I've reached the last straw with my attempts to install windows 7 64 bit onto my PC the story goes as this;
I needed to upgrade from windows XP 32bit to Windows 7 64bit however when I installed my first Windows 7 package I didnt realise but it was infact 32bit so to my annoyance I reformatted back to XP 32bit, (I need 64bit to run several things on my computer such as high end games) in the mean time my family told me they wanted windows 7 on their PC, so using their PC I created a USB boot disk and used it on my bare-bones PC (The one I'd recently reset to XP), this brought up my first Disk Read Error.
Annoyed I tried a few different ways of making a USB boot only to always be brought to the same error, deciding to do the family PC first I used the same boot which had brought up an error on MY PC in my families PC and it worked like a charm. Not a single issue and Windows 7 64bit was installed within the hour. USing this new platform I created a -new- USB boot disk thinking that if I made a 64bit boot off a 64bit system it would have more luck ... No it didnt.
I've tried all sorts of BIOS options but every time it just brings up the same error, I attempt to change the 64bit bootsect.exe to a 32bit one and it didnt bring up the error but then told me files were corrupt. I have unfortunatly only got one ... long ... answer left.
I install windows 32bit again, then use that platform to clean install 64bit windows7 but I doubt that'll work.
For the record I KNOW I cannot upgrade from 32 to 64, I WANT to do a CLEAN INSTALL!
