Windows 7 Boot Loader Recovery
Nov 1, 2012
I have a laptop which until yesterday was dual boot (Windows 7 and SLES11). However I decided I would rather just use Windows with VMWare for any Linux needs. To do this I deleted the Linux partitions (OS, workspace, swap) from within Windows and used this extra space to add to my workspace partition on Windows and create a new partition for my VM's to sit.I got all this working very nicely and was happy with it until I rebooted to machine to see GRUB was still set to be the boot loader which is unable to do anything with no Linux partitions.What I do have is the Windows 7 Reinstallation DVD that came with the laptop however the DVD drive of my laptop is broken. I am currently writing this with a MacBook Pro (Mountain Lion) and so the only solution I can think of is using media oN DVD, and burning this to a bootable USB using the Mac and then setting up BIOS on the 'broken' laptop to boot from DVD. However I am not sure how to create a 'bootable' USB.
1) Can I use my Windows 7 reinstallation disc to recover Windows boot manager
2) If so can I do this via USB?
3) How could I make my USB 'bootable' using my Macbook Pro
4) What are the steps for recovering boot manager from the installation media
5) What is the more elegant way to 'delete' Linux partitions and ensure Windows Boot Manager works (I may also run into this problem with a workstation I set up in same way yesterday but have yet to reboot0
View 2 Replies
ADVERTISEMENT
Nov 13, 2009
I had windows 7 originally Installed on my Laptop. I then Installed Ubuntu 9.10 Desktop version, and it installed the grub boot loader
(All on 1 single HD, each OS is on its own partition.)
This boot loader was used to dual boot between windows and Linux. However now the grub boot loader is broken, and I was talking to some people how knew about Ubuntu, and they said to just delete its partition, which I did.
Now when I boot from my HD I just get a broken grub boot loader, and can’t get even get into my Win 7. Now I just want to get ride of this Grub boot loader, and get Windows 7 MBR back. I have booted from my windows 7 recovery disc, and have done:
Startup Repair – It found no problems, but HD still only boots to broken grub boot loader
System Restore – I restored to before I was having this problem, but HD still only boots to broken grub boot loader
I am trying to figure out what commands to enter in the command prompt to repair the MBR, or maybe just view what partitions are in my computer, and then completely delete the one with Grub on it.
If I type bcdedit I get this:
Windows Boot Manager
Identifier:{bootmgr}
Device:partition = C:
Description:Windows Boot Manager
Inherit:{globalsettings}
Default:{default}
Displayorder:{default}
Windows Boot Loader
Identifier:{default}
Device:partition = D:
Path:Windowssystem32winload.exe
Description:Windows 7
Inherit:{bootsequencesettings]
Recoveryenabled: yes
Osdevice:partition = D:
Systemroot: windows
Nx:OptIn
According to this everything looks fine, The C partition is that 100MB system reserved boot partition that windows 7 creates, and the D partition is a 100GB partition that I created on the HardDrive that windows 7 was installed to. I don’t understand why the windows boot loader will not boot, somehow the grub boot loader is still over riding it, even though I deleted the partition that ubuntu was installed on, and where the grub should have been installed as well.
From the command prompt, if I use diskpart, there are only 2 partitions, a 100MB one, and a 100GB one. Those are C and D respectively, so I am not sure how the grub is still loading unless it installed itself to a NTFS partition if that is even possible.
Does anyone know what commands I can try to repair or recreate the MBR so that windows 7 will load, or maybe commands to delete this Grub boot loader?
View 6 Replies
View Related
Jan 24, 2011
I have an HP pavilion dv4-1555dx laptop that I was trying to install Linux mint 10 gnome on a PNY 8GB flash drive, I forgot to have Linux install grub to the flash drive, so it ended up installing grub to the HDD, now I need to reinstall the windows 7 boot loader but HP didn't send a windows 7 boot disk with the system (OEM windows 7) so I can't jut boot the cd and use the recovery counsel unless there is somewhere online that I can get an iso from, or is there another way?
View 2 Replies
View Related
May 31, 2009
Windows 7 won't show on boot loader ? How do I make it show on my Boot loader menu at start up?
View 3 Replies
View Related
Nov 11, 2011
I have a PC with 2 hard drives- the first hard drive has a single partition and windows 7 64-bit is installed on this hard disk.Now I wish to install CentOS 6 on the first partition of the second hard disk.I have created the dvd for installing Cent OS also.How do I configure the boot loader in Windows? If I install Linux on second hard disk, will this overwrite the Windows Boot Loader? How do I create a dual boot system so that the windows boot loader correctly shows linux as an option, so that I am able to load either Windows 7 (existing) or Linux(on second hard disk- not yet installed)
View 2 Replies
View Related
Oct 9, 2010
what is a boot loader?
View 1 Replies
View Related
May 1, 2011
I have two harddrives in my computer, one is 750GB and just has a bunch of different files from my older computer (documents, movies, etc, but no traces operating system). My other harddrive is 1TB and has Windows 7 on it (which I'm typing from now). For some reason (I think after I installed a Windows Update), when I restart the computer it says, "Bootmgr is missing. Press CTR+ALT+DEL to restart". Before, this had never happened, so I figured out that I had to manually go into my HP boot menu (by pressing ESC when I first start the computer) and then choose my 1TB harddrive to boot into Windows 7. This is kind of a pain.
View 2 Replies
View Related
Jan 31, 2011
is there a way to have windows put the boot loader on a drive of your choosing? I have 2 HDDs in my computer and from what I can tell windows put its boot loader on my other drive. is there a way (other then disconnecting the other one) to get windows to put the boot loader on the other drive like change priority in the BIOs?
View 2 Replies
View Related
Sep 8, 2011
I recently installed Windows 7 on two different hard drives in the same computer.When installing one I disconnected the other drive, and when the first one was installed, I disconnected the first drive and installed it on the other drive.
Now only the second Windows is loaded each time I turn on the computer and boot loader screen where you can choose the OS does not show up.What went wrong and is there any possibility to restore it?
View 4 Replies
View Related
Jul 6, 2010
I've routinely dual booted Linux and Windows over the years, but yesterday I hit a bit of a snag. I had Windows 7 and Vista both installed on a single hard disk. Since it had been awhile since I had booted Vista I decided to delete the partition and install Linux there. What I did not realize is that when I installed 7 it left the BCD on the Vista partition. So, when I installed Linux I effectively blew away my Windows boot loader.I've tried a hundred things at this point without much luck, including the "nuclear holocaust" / manual rebuild of BCD from:Recovering the Vista Bootloader from the DVD - NeoSmart Technologies WikiA few questions / thoughts from my google searches:* Is there anything needed in /boot other than the BCD?
* I am wondering if the "active" / "boot" partition flag is causing me trouble. hen I was trying to rebuild the BCD manually using bcdedit i was getting errors that the partition was not flagged active. I tried to use diskpart to flag it active but it said that the partition type was not valid for the active flag? I was able to set it active using the Linux gparted partition manager, but I can't understand why diskpart would not flag it.* Is it possible to have your oot on a different partition then Windows? The recovery console is mapping C: to my "applications" drive and D: to my "system" drive which contains Windows. I was wondering if I need to put oot on C: instead of D:
View 5 Replies
View Related
Apr 21, 2011
This is quite a long story, So let me get straight to the point.On my Dell Optiplex 360 Computer (Windows 7-Ultimate) I partitioned the hard drive to make space for another windows installation. I then installed Windows Vista Ultimate on it.All of that went successfully but after a while it became useless for me and my computer.
View 3 Replies
View Related
Jul 25, 2009
Is it possible to install Windows 7 (to a different hard drive/partition) by mounting the iso, but then not have it install a boot loader? Obviously you'd have to be using a pre-existing OS to be mounting the iso file, but I can't seem to think of a way for it to not install a boot loader.
I know it's possible to install and then afterwards remove all the boot loader stuff, but it's just a hassle to boot into the DVDs and do all the rebuildbcd or fixmbr stuff.
Also I am aware I could just burn the iso to DVD and install it from that in order to not get a bootloader, but I'd like to know if it's at all possible via mounting the iso.
View 9 Replies
View Related
Aug 29, 2010
My laptop apparently is having a hard time booting. I start it up, it will display the blinking cursor and stay like that forever, i hard shut it down and the BIOS will search for new hardware (as its suppose to) and then the blinking cursor will appear for around a minute before booting up! this is really annoying and ive already Reset the BIOS to default and Reinstalled windows (deleted all Partitions and made one)
View 9 Replies
View Related
Oct 9, 2009
I know this does not necessarily pertain to Windows installation, but I did not know where else to place this thread. I know it is possible to burn isos to a thumb drive, but is there a way to put a boot loader on a thumb drive so I can have many images on separate partitions? For example, I want to partition my 32GB thumb drive into 700MB partitions, so that I can have Clonezilla live on one, GParted on another, and maybe the Windows 7 repair disk on another. Is this possible?
View 4 Replies
View Related
Jan 28, 2013
my HP 550 laptop is failing to boot. upon attempting to do startup repair, it gives me a root cause as "boot manager failed to find os loader".and booting from safe mode is not present despite hitting f8 at boot.
View 2 Replies
View Related
Jun 6, 2011
All I did was open a video strored locally with no connection to the internet. Shut down computer properly. I go to start it up and start up repair kick in. I have let the thing run on startup repair over night and a total of 12 straight hours. It reboots once, maybe even twice. Then it just sit a says attempting repairs. I just did a hard shut done. I was able to pull the data off using Uburba (not sure of the spelling). The USB 2.0 is not recognized in start up repair command prompt. I had a image saved to a CD. I can't get past the username password. The one I had wrote down does not work. System restore fails because I can't it doesn't have a .DDL file or it says something. If I could get the USB 2.0 to work I have an external that has a couple of images that would be better than re-installing. I tried moving the image into the computer then using the image restore, but I learned that doesn't work because it somehow tracks were it wrote the image to. This is way I need the usb 2.0 to pull the image from my external HD.What is the default password of HomeGroupUser$?
View 3 Replies
View Related
Jul 25, 2012
I have a Windows 7 Pro x64 which has been running for a many months without any issues.Three days ago I restarted the machine and Windows 7 didn't start anymore. I have spent a lot of time investigating it and could not find anything wrong with the boot loader or the file system where the OS is.So the boot loader works, I have also replaced it just in case but nothing changed. I can go into the boot loader menu and chose the Windows 7 entry but then the black screen which says "Starting Windows" comes and nothing else happens.Note that the computer doesn't hang, it simply gets stuck at some point and doesn't do anything else. The HDD LED stays on from this point forward and that is it, if I press ctrl+alt+del it restarts and if it were completely frozen it wouldn't.
This Windows 7 runs on a pair of drives in RADI1 so it cannot be a problem with the drives. I have run checks just to be sure and couldn't find anything, no file system issues or bad blocks.The raid controller is not reporting any issues with the drives.I have booted with the windows install cd and tried to repair it many times but the auto repair says it could not repair it, other times it tells me that no issue was found.The boot manager is working fine, I have replaced it just in case using bootrec /fixmbr and /fixboot and also bootsect /nt60 all.I have checked for corrupt files with sfc and no files were corrupt, at least no critical system files.I have manually replaced the winload.exe file but this didn't help either.The problem seems to be at the stage where the boot manager passes control to winload.exe.
View 1 Replies
View Related
Oct 5, 2011
I am currently using windows 7 ultimate x64. I was in the middle of a process restoring my computer to a few days back and suddenly it froze. I did a power shut down and when I turned it back on, I wasn't able to get back into windows. I was brought to startup repair and it gave me errors. 'Boot manager failed to find OS loader'. There was options for restoring, but all my restore points were gone. Recovery wasn't able to find image backup.
"Startup repair cannot repair this computer automatically". I was told to go into safe mode to restore, but whenever I enter safe mode, startup repair would take over and shows the same errors, also I read a tutorial using a repair disc ( made a copy of it on someone elses ultimate x64 computer) and I get the 0x00000e9 error if i boot from disc. What can I do? As of now I don't have the installation disc with me. I wont be able to get hold of it until tomorrow. There's a lot of important files in that hard drive and I really cant lose any.
View 6 Replies
View Related
Jun 23, 2012
I've gotten to the point where I need to just reinstall windows completely on my Asus G74SX (too many problems, I want to start fresh.). I encounter an error 1029 with Asus's recovery disks that I made when I had windows working: it says it is recovering all the way to 100% then doesnt work. I am in the process of trying it again so I'll see if it actually managed to wipe my hard drive like it said it was doing, and maybe if it did actually work and reinstall windows.However, I'd like to be able to get into the recovery partition because I would prefer restoring it with Asus as they recommend me to. However, when I hit F9, their target to get there, it doesn't do anything and just reloads the boot screen, with the Asus logo on it. I don't have an actual Wndows recovery CD so that's not an option, and at this point since my hard drive has likely been wiped by these recovery DVDs, I don't think going into Ubuntu and fixing the MBR will do me much good anymore.It may be worth noting that before I last restarted, I marked the Windows partition as active because of a tutorial here, making it so that recovery partition isn't active anymore.
View 4 Replies
View Related
Nov 2, 2012
Every time I boot my computer, it come up loading files, the open the boot recovery mode. If I leave it, it says that it fix one error, then it restarts and does the same again. The error was that it the boot.ini was missing. So I booted it up with ubuntu, and created an empty boot.ini file, then booted the minitool partition wizard (Partition Wizard Bootable CD allows user to manage partition directly with partition manager bootable CD.) and configured the boot.ini. But still no luck. It's booting into recovery mode because that is the first partition.
View 1 Replies
View Related
Oct 5, 2011
I did the stuff that is listed below, but first, my issue and a yes or no question: If I boot windows, without the Linux CD in, it shows me the "Windows Error Recovery" if I hit start windows normally, it starts loading the windows 7 screen, half way through the Windows Logo, it freezes, then brings me back to the windows error recovery, so I tried "Launch startup repair" it then brought me to a "Windows boot manager" and says 1. Insert your windows installation disc and restart, 2 choose your language settings and then click "next" 3 click repair computer.
View 5 Replies
View Related
Jun 27, 2012
i have a acer aspire 5745G . 4 gb ram and 500 gb hdd.my windows 7 home premium edition had crashed and was unable to boot. plus my whole hard disk was FOrmatted .."including the windows recovery partition.".i have made the recovery cds and i am desperatly trying to boot from the cds but when i insert the recovery cd nothing opens..i.e. it is not booting. i have checked the boot order and everythng else.. somehow not able to install windows. my harddsk has no O.S. now.i need to start y laptop what do i do ..why isnt my recovery disk booting(it used to boot esrlier).is it because the recovery partition was erased.
View 5 Replies
View Related
Dec 9, 2011
My daughters ASUS K52F needed to be rebuilt to factoy specs. (I have done this before on an ACER and a GATEWAY without issues.)I started the restore and loaded each of the 4 disks when requested and it made it to 100% and I pressed on finish when requested and the computer restarted itself but then did not do anything but load the black screen with the ASUS logo.I must have missed a step but I do not know what that is.Has anyone else had this issue or know what I need to do now to get windows to boot/load?
View 4 Replies
View Related
Dec 23, 2011
I was in the middle of reinstalling Windows 7 and the power went out. The computer Dell Inspiron 1440 is caught in a continuous loop. I have 3 options to choose from when I power up the computer:
Windows 7
Windows RollBack and
Another Windows 7.
Regardless of what option I choose (I tried all 3) it goes to a second screen where I have 2 options: Launch Start up repair or start windows normally. Regardless of which of those options I choose it goes back to the first 3 choices (Windows 7 Windows Roll setup rollback or Windows 7). I can't make any progress. I have tried booting from safe mode (F8) and it still will not boot. It blinks safe mode for a few seconds then reboots and goes through the same continuous loop.
I am trying to boot from the CD; I am using an external CD drive as the internal drive does not work properly. The boot sequence it set to the CD drive first. I have tried everything I can think of and I have been searching the internet for days and I cannot figure out how to get this system back up. I do not care if I lose everything on the drive. MI have all the discs from Dell.
View 2 Replies
View Related
May 2, 2012
however, this time, he is away and is unable to help me. So I try to do the same thing, I run start up repair, and it says problems can't be solved automatically, I clicked on details, it shows that a problem signature is CorruptFile.This time, theres no BSOD, but it kept leading me to the Start up recovery page (the one with sys restore, restore system using image etc and command prompt). I tried running safe mode, as well as safe mode with networking, last known good config, ran all the options on system recovery/system restore. It seems like the only option i have left is use the command prompt to fix the problem. I lost the windows installation CD, so some of the commands such as bootrec.exe is in vain. I don't really know what i'm doing any way when I use the command prompt. As a last resort, I'm willing to reinstall my comp, what do i do so that i can save some files? also is it possible that I download the reinstallation file since I lost the original one?
View 9 Replies
View Related
Oct 13, 2012
I have a Toshiba laptop in which I installed my copy of Windows 7. Recently, it has not been able to boot: it just restarts when trying to. I tried the typical things:booting to safe mode, etc. but they all do the same. So I tried to sin the System Recovery Options, first from the Advanced Boot Options menu and then directly from my Windows 7 disk. In all these cases, the program gets stuck after selecting the "Repair Your Computer" option, as in this picture:The mouse keeps working fine, but all I can see is the background image, and no window pops up. I know that it is supposed to prompt me to select my windows installation, but that window never comes up. A similar thing happens when I try to install windows instead. It just never gets to the next step.Is there anything that anyone can think of that I could do to solve this problem?
View 1 Replies
View Related
Apr 27, 2012
Ordered recovery cds from acer. Had to delete 100 mb partition to make it work. Said recovery successful except when computer re-booted. Error msg came up: "An error occured while attempting to read the boot configuration data."File BootBCD Status: Oxc0000225.It also said to fix problem insert my windows install disk.Choose your language settings and click next.Click "Repair your computer".I dont have windows install disks. There are none on internet to download. I thought system recovery installed all this. Can someone help to get this booted up and running.
View 1 Replies
View Related
Apr 10, 2012
My key board is locked. I cant use my usb mouse. All I get on start up is the last attemp to resume the system frome its previous location failed. Attempt to resume again? continue with system resume or delete restoration data and proceed to system boot menu on a black screen.
View 1 Replies
View Related
Nov 2, 2012
i have installing the win7 home premium, after installing when i run system loader for win 7 my system is restarting again and again.. without running loader i have not that problem..
View 2 Replies
View Related
Dec 17, 2011
I recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active"... I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart" ... I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message. I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc.
I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "FACTORY IMAGE" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
View 2 Replies
View Related
Dec 17, 2011
I recently created a new partition with 200GB of space on my Windows 7 64bit (HP Elite) PC system. I installed Windows XP Professional on that new partition (trying to create dual OS). After Windows XP was installed, I was unable to find "Windows 7" as a boot option under "Startup and Recovery"... I could only see Windows XP Professional. I went to Disk Management and right clicked on the partition where my Windows 7 OS was under, and chose "Make partition active"... I got a warning system MAY not be able to boot, but I chose to proceed anyways. I tried restarting and got an error "BOOTMGR is missing / Press Ctrl+Alt+Del to restart" ... I tried pressing F11 after restarting to get into "System Recovery" but it would go directly to the error message. I was still be able to access everything else during boot except "System Recovery" such as BIOS, etc.I re-installed Windows XP Professional on the same partition... and was now able to get into the Windows XP Pro OS again. I'm still unable to access "System Recovery" when booting. F11 option is being bypassed and going directly into XP OS. This is my first concern, how do I get "System Recovery" to get working again? It used to work before as I re-installed Windows 7 couple of months ago. I can still see "FACTORY IMAGE" drive in My Computer (could be on a different drive letter than before). And second, how do I boot to my original Windows 7 OS (C-drive seems intact and all Win-7 system files are there)?
View 6 Replies
View Related
