So a couple of days ago my computer started to act up but this morning when i turned it on, i got a blue screen and it never wanted to turn on ever since. So i tried reinstalling Windows 7 again on the current system because i do not want to lose my pictures. Is there any way to fix this?
View 2 Repliesi have a weird problem about my computer. firstly my dvd-rom doesn't work correcly ( i have changed my first dvd-rom cause of same problem ) . and last two days pc started to work very very slow. it opens in nearly 15 minutes and shut down in same time. i am facing with this error when i shut down before i waiting the opening screen of windows. and when this error comes it says1) continue bla bla2) do system restorewhen i select system restore it gave an another error like "cannot access required driver".
View 1 Replies View RelatedI Installed Acronis Disk Director Suite 10.1 yesterday on my Windows 7 and got this problem when it boots up I get the option to choose OS. Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
Then I tried to run the Windows 7 installation disk, I go to the cmd prompt and run the
DISKPART
diskpart
list disk
select Disk X (X=disk where I installed all the OS, should be Disk 0)
list partition
select Partition X (X=partition containing OSX)
Virtual Disk Service error:
The pack is not online
and then i run the Bootrec /ScanOS, it came with 0 identified Windows Installations, this is why I come into the cmd prompt as I could not select the installed OS.
I've tried that from bootable cd to repair the install but the partition of windows7 is not recognized still.
I have had an HP Envy 14-1110nr for just under a year now and suddenly it has been giving me problems the last few weeks. It started with a couple of hangs or random crashes over the first week. After 2 or 3 of those, the computer simply wouldn't start up. Every time I would turn the laptop on, it would get to a certain part, give me the following error and then restart, over and over.
"File:\boot\BCD Status: 0xc00000e9 unexpected I/O error has occurred�
Nothing seemed to be working, and then finally last night I started getting errors from just about everything saying that my HDD was rapidly failing.SMART HDD Error 301 Intel Rapid Storage Technology gives me a warning saying something is wrong with the HDD.Microsoft also gave me an error saying that the HDD is at risk and to back up my files immediately.After doing one final test I was able to get the boot problem solved, at least it seems to be fixed for now but the errors are persisting. Could all of the errors that I'm getting because of that boot or is the drive really broken? Chkdsk shows absolutely nothing wrong with the drive at all, no bad sectors, nothing. Could it have something to do with the boot error that I was getting before or is it likely really damaged?The HDD in question is a Samsung HM640JJ 640GB.
i cant get windows every time i try i get the message "File:ootBCD Stauts: 0xc00000f Info: an error occcured while trying to read the boot conifguration data." ive tried going into windows repair from my repair cd but theres no os in recovery options
View 1 Replies View RelatedGetting a I/O error status of OXC000000e.In Windows Home Premium 64 bit
View 1 Replies View RelatedIt's been about a week since my computer stopped working. Every time i try and turn it on I'm given the message[ Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible.] I have burn a system repair disk that I acquired online but when i try the start up repair it never finishes, i know that the process should take awhile but I've left it to run for 10+ hours and still nothing
Basic Info:
-Lenovo Thinkpad T510 series
-Windows 7 32 bit service pack 1
I've got 2 2TB hdd running in a raid0 volume setup with Intel RST. I made a flash disk for the raid drivers. Then I go ahead and start the install of Windows 7, load the raid drivers, create a 1TB partition to install Windows 7 on and have a 3TB partition for storage and such. Installs windows no problem. When i restart the system windows boot manager appears with "0xc0000225 - The boot selection failed because the device is inaccessible"If i then restart the computer, i get windows error recovery screen, if i choose Start windows normally, it boots fine. If i choose repair, it just goes back to the 0xc0000225 screen. This happens every time i restart the computer.I've tried everything i can think of, such as changing the boot order in the bios and such.
View 1 Replies View RelatedWell first of all I started up my PC and it immediately jumped into Startup Repair maybe cause I didn't shut it down properly. It went through the repair and several times. By then I knew something was wrong, I checked the Diagnostics and see what Startup Repair had actually done. It turns out it could not fix an error with the OS Loader.It came up with two error code (0x2) and (0x490).I followed the following instructions:
1. bcdedit /export C:BCD_Backup
2. C:
3. cd Boot
4. attrib bcd -s -h -r
5. ren C:BootBCD BCD.old
6. bootrec /RebuildBCD
I also tried using /FixMBR and /FixBoot However none of these worked and my I tried booting up it came up with the same problem. I went back into the Windows 7 DVD and ran Startup Repair again. It said it was completed successfully but it said also if it doesn't boot then there's something wrong.Which leads to my new error screen that never goes away everytime I switch on the PC. The error message is as follows:A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.If you have a Windows installation disc, insert the disc and restart your computer. Click "Repair You Computer," and then choose a recovery tool.Otherwise, to start Windows so you can investigate further, press the ENTER key to display the boot menu, press F8 for Advanced Boot Options, and select Last Known Good. If you understand why the digital signature cannot be verified and want to start Windows without this file, temporarily disable driver sginature enforcement.
File: WindowsSystem32Winload.exe
Status: 0xc0000428
Info: Windows cannot verify the digital signature for this file.
If I try and press ENTER it will take me to the boot menu and if I press ENTER to select an OS (I only have one) then it will jump back to the previous screen.
I am getting the following error from past 2 days :-It says "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your Windows installation disc and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your Computer".
Status: 0xc0000225.
Since i dont have the recovery disc so i downloaded the one from torrent but of no use as it failed to read from the USB.
i downloaded the free edition of Oracle SQL Developer for 32-bit Windows (This zip file includes the JDK1.6.0_11) - though i run 64bit - windows 7 After extraction, i double click sqldeveloper.exe under new connection window what should be my inputs for connection name, username, password,hostname, port, sid when i give sample inputs and test for connection it throws "Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection" how to establish a successful connection
View 3 Replies View RelatedI have recently installed Backtrack 5 kde with unetbootin.originally i wanted to install Backtrack on different drive than Windows 7 but since unetbootin wont let me i had to install it on the same one when choosing to unetbootin in the boot menu i end up with a message that ubnldr.mbr is missing or corrupt, status 0xc0000098 I have tried using EasyBCD to solve this but no luck?
View 1 Replies View RelatedWin7's Windows Explorer has a full-width pane just above the Status Bar that shows some of the details regarding the item that is highlighted in either the Navigation or File Pane. How do I permanently get rid of this pane. I find that it is redundant and occupies precious screen real estate.I've tried the Classic Shell, Folder Options and the Organize->Layout possibilities.
View 1 Replies View RelatedIt's a Samsung monochrome laser printer ML-1665. The printer only successfully prints a test page upon installation. Any subsequent attempts at printing fails with an "Error - Printing" in the printer status menu, and an error message saying the "USB status is not available." The printer installed and printed successfully on a separate computer.Both USB ports are working.The Device Manager says all devices are operational.In Serivces, Printer Spooler is set to Automatic. Its services Dependencies are Started and set to Automatic.It is set to Defeault Printer.I am using Windows 7 64bit.All drivers are up to date. I've also downloaded and installed the drivers from
Samsung website: http:[url]....
The following is from Windows Troubleshooting Report:
Issues found
Problem with printer. Detected
User initiated troubleshooting on a USB device. Detected
Potential issues that were checked
Printer Samsung ML-1660 Series is not shared with the homegroup. Issue not present
Printer paper is low or empty. Issue not present
Printer toner is low or empty.
Issue not present Printer has a paper jam.
Issue not present Printer driver requires update.
Issue not present Plug and Play printer Samsung ML-1660 Series has encountered a driver problem. Issue not present Printer is turned off.
Issue not present A print job in the print queue is preventing other print jobs from printing. Issue not present
The USB device might have stopped responding.
Issue not present The Print Spooler service is experiencing problems. Issue not present
Print Spooler service isn't running. Issue not present
Samsung ML-1660 Series is not the default printer. Issue not present
I have a desktop PC with 2 x 1 GB discs which has a startup problem. When I start the PC up I get a screen Saying SMART status bad, Backup and Replace. Press F1 to run setup. When I do this, I get the ASUS EFI BIOS UTILITY screen giving various options. Pressing the "Boot Menu" button gives me 6 options. Pressing the SATA ST option results in the message "A disc read error occurred press CTRL + ALT + del to restart" on a black screen. I have a Windows 7 repair disc, but how do I get the PC to default to it when the DVD drive is not an option on the "Boot Menu". I have a Windows backup on an external drive.
View 3 Replies View RelatedCurrently I am sitting in front of a Windows 7 (Home) where the WinExplorer shows at the bottom an additional bar for each fodler/file.Its NOt the status bar but a second one.How do I disable/hide it permanently ?
View 1 Replies View RelatedI once was able to print wireless windows 7. Now it shows offline. I cannot find any option to turn it online.
View 3 Replies View RelatedChange printer status offline to online windows 7
View 3 Replies View RelatedI am unable to install Windows 7 or XP on my new build. I own a Windows 7 Professional 64-Bit Disc and the XP Disc is from my old PC. After choosing to boot from my optical drive, I receive a Windows Boot Manager scree that tells me that Windows has encountered a problem communicating with a device connected to your computer.
Status: 0xc00000e9
I have tried the following:
- Rebooting my PC and only having my SSD connected to my MB (no beeps)
- Rebooting my PC and only having my HDD connected to my MB (no beeps)
- Trying both of my HDDs connected to my MB (no beeps)
- Having both of my HDDs disconnected. (no beeps)
- Trying to install Windows XP, but I received a similar error (no beeps)
- Changed the SATA mode in my BIOS from ACHI to IDE - (my pc then made loud, rapid, and continuous beeps)
Do I have to send my drives back for an RMA or is my MB bad? Everything is powering on, but I do not know what the problem is. Could it be my SATA 6GB/s cables?
Build:
- Motherboard: ASUS P8 Z68-V/Gen 3
- Processor: Intel i5 2500k
- Memory: G.Skill 4GB x 2 DDR3 PC12800
- Graphics Card: Nvidia GTX 560ti
- PSU: Corsair HX850
- Optical Drive: Samsung 12X S-ATA Blu Ray Drive
- SSD: Crucial M4 128 GB → SATA III → SATA 6GB/s
- HDD: WD Caviar Blue 500 GB → 16MB cache → 7200 RPM → SATA 6GB/s
All of a sudden mylaptop will not print to my HP 7200 series printer. It says offline. My desk top works fine. I have reooted everything......What else is there to get it back......
View 18 Replies View RelatedI was trying to find out the meaning of the messages that appear on the lower left of the Internet Explorer 8 windows (in the status bar). I was visiting a site (pcguide.com) and I got a weird icon in that spot. I am worried I might have picked up a nasty bug from that site, because I had a hard time closing it (windows kept popping up).
View 2 Replies View RelatedHow to Turn the Windows Explorer Status Bar On or Off in Windows 7 ?
View 0 Replies View Relatedwhat dhould i do i have an error problem upon loading my unit, it say that "ST3250318as S M A R T Status bad, back and replace"
View 2 Replies View RelatedMy Emachine has Windows 7 Home Premium 64-bitWhen I turn on my computer I get a black screen with an error message and asking I insert the Windows Installation disc. Unfortunately, I don't have one. Never came with computer. The error message is regarding the following:File: BootBCDStatus: Oxc0000011
View 8 Replies View RelatedFirst of all every time I am logged on to my WIFI at home, after a couple of hours, I get told that I am loged on to two WIFI networks (A and B), whilst I only get one set of bars in my statusdisplay (bottom right). When I switch off WIFI, network centre keeps telling me I am loged on to WFI B. A is the SSID and B is the typenumber of teh router I have, so there is only one WIFI signal. Secondly, after being logged on to my home WIFI, All activity seizes, I can not load pages, check e-mail, or anything. I can access my router and it tells me everything is ok, but packages seem to come to a halt. My PS3 can be online, so the problem is in my laptop I think. I have tried releasing and renewing my IP and resetting my router, but only rebooting my laptop helps.
View 1 Replies View RelatedI'd noticed my Skype status wasn't being displayed anywhere on the web, Open Skype, navigate to Options, then to Privacy.
View 1 Replies View RelatedI have Microsoft Security Essentials and I updated andscanned and have the same ver 1.1.9002.0 as my other computer that is protectedso how can I get my computer protected with Microsoft Security Essentials? Isthere a time limit?
I just uninstalled and re-installed and that worked
the status of my wifi say 522,000,000 sent but the recieve is only 50,000,000 bytes,is that normal or someone is using my wifi or my settings are not correct?
View 2 Replies View Relatedthe status of my wifi say 522,000,000 sent but the recieve is only 50,000,000 bytes,is that normal or someone is using my wifi or my settings are not correct?
View 1 Replies View RelatedIs my account now activated ?
View 5 Replies View RelatedHave deleted all printers, all drivers and am trying to reinstall HP OfficeJet PRO 8000 (series). One desktop, Win7, prints OK. Second desktop, XP SP3, will not print (print queue lists several documents, first one w/ "error".
View 6 Replies View Related