i cant get windows every time i try i get the message "File:ootBCD Stauts: 0xc00000f Info: an error occcured while trying to read the boot conifguration data." ive tried going into windows repair from my repair cd but theres no os in recovery options
View 1 Replies
I am new to this but hopefully somebody out there can offer some pearls of wisdom? My Packard Bell laptop (I think it is called an "Easy note TJ71) model will not work. When I turn on the power a black screen telling me to "insert my Windows installation disc" choose my language and then click "repair your computer" appears.I copied recovery discs and driver discs etc when I bought it (about a year ago) but no "Windows installation disc".The system running on it is the Windows 7 one.Is there anything to be done (other than trying to contact Windows for a copy of the install disc).
View 5 Replies View Relatednet book wont start. i turn it on and it says this----"status 0xC000000F windows failed to start. a recent hardware or software change might be the cause" this is on a acer aspire 1 netbook. it asks for a disk to repair it but the net book does not have a cd drive.
View 14 Replies View RelatedSo a couple of days ago my computer started to act up but this morning when i turned it on, i got a blue screen and it never wanted to turn on ever since. So i tried reinstalling Windows 7 again on the current system because i do not want to lose my pictures. Is there any way to fix this?
View 2 Replies View Relatedwhenever I turn on the laptop, it seems to boot into Windows 7, in that the "Starting Windows" text appears and the little animation of colors forming the logo shows, but as some point it fails. This message appears on screen:autocheck not found - skipping AUTOCHECK After a few seconds a BSOD shows up, but too fast for me to make out what it says. It used to, but after some hasty fix attempts no longer does, cycle around to a menu that informed me of this error:Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. Here's the longer history:As some point in the past I decided to try out dual-booting Windows 7 and Linux on the laptop. I got it to a state where this worked fine. I had partitions roughly as follows:[Ubuntu][Windows 7]([Data and files][Boot]) The parentheses denote a logical partition. The Boot partition was very small and only held what was necessary to launch GRUB. This week, I realized that I hardly ever used the Linux partition and decided to get rid of it to reclaim storage space. This is where the trouble begins. I rebooted into a thumb drive that could run GParted and modified the hard drive layout in the following steps: Delete the Ubuntu partition Delete the Boot partition Grow the Data/Files partition to take up the space left by Boot Shrink the Windows 7 partition to make it faster to move Move the Windows 7 partition to the front of the volume Expand it to take up the remaining space. What I ended up with was: [Windows 7]([Data and files]) My naive and fatal mistake was to trust that the Windows Repair CD could fix any boot issues, and also that there would be no catastrophic hardware failures. Both of these assumptions turned out to be false.
First, the laptop's CD/DVD drive has either broken or is too unreliable to use. I have noticed it becoming more and more unstable over time, but now (when I need it most!) it simply does not seem to want to spin up and function at all. This forced me to create a Windows Repair USB drive. However, I can't load any installation media. This is because the laptop did not come with an install DVD. It had a recovery sector, which I cannibalized for the Linux partition. I did copy the stock recovery stuff to a series of DVDs, but, well...This is all to say that any solution that requires a DVD drive is straight out until I can replace it, which I'd like to consider a last resort.My expectations for the Windows Repair CD/USB have been dashed. Attempting to automatically fix boot issues either fails for some specific reason (I can probably reproduce it and provide the details, if necessary), with a dialog to send a report, or fails because it cannot detect any problems. I have tried a variety of things based on my own research to fix this through the command prompt: Running chkdsk /x /r on all drives. Does not find any errors. Running various bootrec commands: /fixmbr, /fixboot, /rebuildbcd, /scanos. All complete successfully, but the last 2 report finding 0 Windows installations. Using bcdboot and bootsect to recreate the bootloader. Again, no errors result, but it does not fix the issue. I guess it should have been obvious that none of the boot record fixes would matter, since the laptop does boot into Windows 7, briefly.
I Installed Acronis Disk Director Suite 10.1 yesterday on my Windows 7 and got this problem when it boots up I get the option to choose OS. Windows failed to start. A Recent hardware or software change might be the cause. To fix the problem:
1. Insert your windows installation disc and restart your computer.
2. Choose your langugae settings, and then click next
3. Click "repair your computer."
Status: 0xc000000e
Info: The boot selection failed because a required device is inaccessible.
Then I tried to run the Windows 7 installation disk, I go to the cmd prompt and run the
DISKPART
diskpart
list disk
select Disk X (X=disk where I installed all the OS, should be Disk 0)
list partition
select Partition X (X=partition containing OSX)
Virtual Disk Service error:
The pack is not online
and then i run the Bootrec /ScanOS, it came with 0 identified Windows Installations, this is why I come into the cmd prompt as I could not select the installed OS.
I've tried that from bootable cd to repair the install but the partition of windows7 is not recognized still.
i have a weird problem about my computer. firstly my dvd-rom doesn't work correcly ( i have changed my first dvd-rom cause of same problem ) . and last two days pc started to work very very slow. it opens in nearly 15 minutes and shut down in same time. i am facing with this error when i shut down before i waiting the opening screen of windows. and when this error comes it says1) continue bla bla2) do system restorewhen i select system restore it gave an another error like "cannot access required driver".
View 1 Replies View RelatedI've got 2 2TB hdd running in a raid0 volume setup with Intel RST. I made a flash disk for the raid drivers. Then I go ahead and start the install of Windows 7, load the raid drivers, create a 1TB partition to install Windows 7 on and have a 3TB partition for storage and such. Installs windows no problem. When i restart the system windows boot manager appears with "0xc0000225 - The boot selection failed because the device is inaccessible"If i then restart the computer, i get windows error recovery screen, if i choose Start windows normally, it boots fine. If i choose repair, it just goes back to the 0xc0000225 screen. This happens every time i restart the computer.I've tried everything i can think of, such as changing the boot order in the bios and such.
View 1 Replies View RelatedIt's been about a week since my computer stopped working. Every time i try and turn it on I'm given the message[ Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible.] I have burn a system repair disk that I acquired online but when i try the start up repair it never finishes, i know that the process should take awhile but I've left it to run for 10+ hours and still nothing
Basic Info:
-Lenovo Thinkpad T510 series
-Windows 7 32 bit service pack 1
I have had an HP Envy 14-1110nr for just under a year now and suddenly it has been giving me problems the last few weeks. It started with a couple of hangs or random crashes over the first week. After 2 or 3 of those, the computer simply wouldn't start up. Every time I would turn the laptop on, it would get to a certain part, give me the following error and then restart, over and over.
"File:\boot\BCD Status: 0xc00000e9 unexpected I/O error has occurred�
Nothing seemed to be working, and then finally last night I started getting errors from just about everything saying that my HDD was rapidly failing.SMART HDD Error 301 Intel Rapid Storage Technology gives me a warning saying something is wrong with the HDD.Microsoft also gave me an error saying that the HDD is at risk and to back up my files immediately.After doing one final test I was able to get the boot problem solved, at least it seems to be fixed for now but the errors are persisting. Could all of the errors that I'm getting because of that boot or is the drive really broken? Chkdsk shows absolutely nothing wrong with the drive at all, no bad sectors, nothing. Could it have something to do with the boot error that I was getting before or is it likely really damaged?The HDD in question is a Samsung HM640JJ 640GB.
I am getting the following error from past 2 days :-It says "Windows failed to start. A recent hardware or software change might be the cause. To fix the problem:
1. insert your Windows installation disc and restart your computer.
2. Choose your language settings, and click "Next."
3. Click "Repair your Computer".
Status: 0xc0000225.
Since i dont have the recovery disc so i downloaded the one from torrent but of no use as it failed to read from the USB.
I have two hard drives, C and D. I had Windows 7 installed on both at one point. Now, I only have Windows 7 installed on C. However, it still comes up asking which installation it wishes me to boot on startup.
I was getting annoyed by this, so I followed a guide that told me how to stop it, by unticking the "Wait 30 seconds before selecting" option.
Now, however, on booting, Windows automatically selects the WRONG installation, which gives me a 0xc000000f error with device inaccessible. I need to get into my C: version of windows to retick that box until I can figure out how to get rid of the menu the correct way.
Booting from disk to repair doesn't do anything, I've tried repairing both installations but it didn't help.
i am having trouble repairing the error. i have tried all the bootrec commands etc nothing is working do not really want to reinstall as it has important files on it . problem occured after wife installed some software that worked fine on her old xp system
View 4 Replies View RelatedWhen i start up my dell inspiron laptop i am getting error 0xc000000f and I literraly cannot do anything. I have windows 7 in a usb and it showed to repair my bootmgr and when i click next it comes up with an error start options cannot be opened.
View 2 Replies View RelatedYesterday I came home from work to a black screen that said "Error Loading OS". Not sure how this happened, so I restarted it and it came right back to that. Spent a few minutes digging around and found out that my hard drive was not set in the BIOS as a boot drive (although no idea how that changed), so I switched it back and the computer booted fine.Today, I come home from work and again, I see the black screen that says "Error Loading OS". I restarted, went in the BIOS, and saw that of 4 hard drives in the system, only 1 (non boot) showed up. This is weird. I shut down for a few minutes, booted it back up to the BIOS, and my primary hard drive was listed again. Selected that, and Windows booted up fine.
Was using the computer for about an hour when everything just froze. The mouse still worked and moved, but nothing else at all was working. So I restarted again, and I got to a "Windows failed to start" / 0xc000000f error. Off to the BIOS again, where again, only 2 or 3 of my 4 hard drives were listed. I shut down, left it for a few minutes, rebooted back, and selected my primary drive again. Then I went ahead and created an image of my primary drive just in case.I have no idea wh thought it might be a hard drive failure, or it could be something messed up in my motherboard. I have a 64GB Crucial M4 SSD drive that is less than a year old, along with an ASRock Z68 PRO3 motherboard that was bought at the same time.
My Gateway laptop running Windows 7 Home Premium (x64) recently crashed, and when I rebooted it, it displayed this: Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer.
2. Choose your language settings, and then click "Next."
3. Click "Repair your computer."
If you do not this disc, contact your system administrator or computer manufacturer for assistance.
Status: 0xc000000f
Info: The boot selection failed because a required devices is inaccessible.
The thing is, I don't have a Windows installation disc! I was just browsing the internet when my laptop crashed, and now I can't do anything; repair your computer, safe mode, boot from last known good setting, etc. all result in the same error screen.
Recovering my system a faced this error after the instalation was started, so now my HD is formated and I can't start my windows in anyway, when I try I get the follow message:Windows couldn't.a recent hardware or software change might have caused the problem. To get fixed: 1-Insert the Windows installation disc and restart your computer. 2-Choose your language settings and click "Next. " 3-Click "Repair your computer ". If you do not have the disc, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000f________My pc is an acer aspire with was runnig windows 7 ultimate can?
View 1 Replies View RelatedSo i have get this error 0xc000000f, which is very common. It's asking me to insert windows 7 cd and do start up repair.But when i insert 7 cd it won't boot. Hence i can't repair.When i insert xp cd into drive, it get boot. But after initial loading it says some files are corrupted.Now i want to ask that, does this problem persist because of any fault in hard disk or motherboard.My pc is under warranty but the man from whom i purchase my pc is out of town and will not come untill february. Father not giving me money to repair. I don't want to shut my pc for whole month
View 2 Replies View RelatedI am using Vista and the computer just restarted for no reason. The problem though the computer will not start. I am at a black screen with the message that the file windowssystem32winload.exe is missing or corrupt. The error code is 0xc000000f. I don't know what to do. The computer is asking for the startup disc. I did not receive one when I purchased my computer. I am lost as to what to do.
View 1 Replies View RelatedI have recently installed Backtrack 5 kde with unetbootin.originally i wanted to install Backtrack on different drive than Windows 7 but since unetbootin wont let me i had to install it on the same one when choosing to unetbootin in the boot menu i end up with a message that ubnldr.mbr is missing or corrupt, status 0xc0000098 I have tried using EasyBCD to solve this but no luck?
View 1 Replies View RelatedWin7's Windows Explorer has a full-width pane just above the Status Bar that shows some of the details regarding the item that is highlighted in either the Navigation or File Pane. How do I permanently get rid of this pane. I find that it is redundant and occupies precious screen real estate.I've tried the Classic Shell, Folder Options and the Organize->Layout possibilities.
View 1 Replies View RelatedI have a desktop PC with 2 x 1 GB discs which has a startup problem. When I start the PC up I get a screen Saying SMART status bad, Backup and Replace. Press F1 to run setup. When I do this, I get the ASUS EFI BIOS UTILITY screen giving various options. Pressing the "Boot Menu" button gives me 6 options. Pressing the SATA ST option results in the message "A disc read error occurred press CTRL + ALT + del to restart" on a black screen. I have a Windows 7 repair disc, but how do I get the PC to default to it when the DVD drive is not an option on the "Boot Menu". I have a Windows backup on an external drive.
View 3 Replies View RelatedCurrently I am sitting in front of a Windows 7 (Home) where the WinExplorer shows at the bottom an additional bar for each fodler/file.Its NOt the status bar but a second one.How do I disable/hide it permanently ?
View 1 Replies View RelatedI once was able to print wireless windows 7. Now it shows offline. I cannot find any option to turn it online.
View 3 Replies View RelatedChange printer status offline to online windows 7
View 3 Replies View RelatedI am unable to install Windows 7 or XP on my new build. I own a Windows 7 Professional 64-Bit Disc and the XP Disc is from my old PC. After choosing to boot from my optical drive, I receive a Windows Boot Manager scree that tells me that Windows has encountered a problem communicating with a device connected to your computer.
Status: 0xc00000e9
I have tried the following:
- Rebooting my PC and only having my SSD connected to my MB (no beeps)
- Rebooting my PC and only having my HDD connected to my MB (no beeps)
- Trying both of my HDDs connected to my MB (no beeps)
- Having both of my HDDs disconnected. (no beeps)
- Trying to install Windows XP, but I received a similar error (no beeps)
- Changed the SATA mode in my BIOS from ACHI to IDE - (my pc then made loud, rapid, and continuous beeps)
Do I have to send my drives back for an RMA or is my MB bad? Everything is powering on, but I do not know what the problem is. Could it be my SATA 6GB/s cables?
Build:
- Motherboard: ASUS P8 Z68-V/Gen 3
- Processor: Intel i5 2500k
- Memory: G.Skill 4GB x 2 DDR3 PC12800
- Graphics Card: Nvidia GTX 560ti
- PSU: Corsair HX850
- Optical Drive: Samsung 12X S-ATA Blu Ray Drive
- SSD: Crucial M4 128 GB → SATA III → SATA 6GB/s
- HDD: WD Caviar Blue 500 GB → 16MB cache → 7200 RPM → SATA 6GB/s
Getting a I/O error status of OXC000000e.In Windows Home Premium 64 bit
View 1 Replies View RelatedAll of a sudden mylaptop will not print to my HP 7200 series printer. It says offline. My desk top works fine. I have reooted everything......What else is there to get it back......
View 18 Replies View RelatedMy Emachine has Windows 7 Home Premium 64-bitWhen I turn on my computer I get a black screen with an error message and asking I insert the Windows Installation disc. Unfortunately, I don't have one. Never came with computer. The error message is regarding the following:File: BootBCDStatus: Oxc0000011
View 8 Replies View RelatedFirst of all every time I am logged on to my WIFI at home, after a couple of hours, I get told that I am loged on to two WIFI networks (A and B), whilst I only get one set of bars in my statusdisplay (bottom right). When I switch off WIFI, network centre keeps telling me I am loged on to WFI B. A is the SSID and B is the typenumber of teh router I have, so there is only one WIFI signal. Secondly, after being logged on to my home WIFI, All activity seizes, I can not load pages, check e-mail, or anything. I can access my router and it tells me everything is ok, but packages seem to come to a halt. My PS3 can be online, so the problem is in my laptop I think. I have tried releasing and renewing my IP and resetting my router, but only rebooting my laptop helps.
View 1 Replies View RelatedI turned on my pc, and it would not let me get past start up, saying
file : Windowssystem32
tkrnlpa.exe
status : 0xc00000e9 Info:
Windows failed to load because the kernel is missing or corrupt
I tried a few things, mostly the startup repair option that it would (recommend) to me next to the start windows normally option. this did absolutely nothing, and the problem continued. So I said ok, I give up, and decided to back up everything and completely reformat and reinstall windows. I did this, it installed successfully. I couldn't believe it...even after completely reformatting, I could not get past start up. The system repair option still does nothing, even with the disc in and I tried reinstalling it a bunch of times, but now it wont even do that correct all the way through, keeps coming up with errors talking about files either missing or corrupt. I wiped partitions and tried again alot of times, but nothing. Now it doesnt even recognize windows 7 as being installed at all. [URL]
