Recovering my system a faced this error after the instalation was started, so now my HD is formated and I can't start my windows in anyway, when I try I get the follow message:Windows couldn't.a recent hardware or software change might have caused the problem. To get fixed: 1-Insert the Windows installation disc and restart your computer. 2-Choose your language settings and click "Next. " 3-Click "Repair your computer ". If you do not have the disc, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000f________My pc is an acer aspire with was runnig windows 7 ultimate can?
So i have get this error 0xc000000f, which is very common. It's asking me to insert windows 7 cd and do start up repair.But when i insert 7 cd it won't boot. Hence i can't repair.When i insert xp cd into drive, it get boot. But after initial loading it says some files are corrupted.Now i want to ask that, does this problem persist because of any fault in hard disk or motherboard.My pc is under warranty but the man from whom i purchase my pc is out of town and will not come untill february. Father not giving me money to repair. I don't want to shut my pc for whole month
When i start up my dell inspiron laptop i am getting error 0xc000000f and I literraly cannot do anything. I have windows 7 in a usb and it showed to repair my bootmgr and when i click next it comes up with an error start options cannot be opened.
I am using Vista and the computer just restarted for no reason. The problem though the computer will not start. I am at a black screen with the message that the file windowssystem32winload.exe is missing or corrupt. The error code is 0xc000000f. I don't know what to do. The computer is asking for the startup disc. I did not receive one when I purchased my computer. I am lost as to what to do.
Yesterday I came home from work to a black screen that said "Error Loading OS". Not sure how this happened, so I restarted it and it came right back to that. Spent a few minutes digging around and found out that my hard drive was not set in the BIOS as a boot drive (although no idea how that changed), so I switched it back and the computer booted fine.Today, I come home from work and again, I see the black screen that says "Error Loading OS". I restarted, went in the BIOS, and saw that of 4 hard drives in the system, only 1 (non boot) showed up. This is weird. I shut down for a few minutes, booted it back up to the BIOS, and my primary hard drive was listed again. Selected that, and Windows booted up fine.
Was using the computer for about an hour when everything just froze. The mouse still worked and moved, but nothing else at all was working. So I restarted again, and I got to a "Windows failed to start" / 0xc000000f error. Off to the BIOS again, where again, only 2 or 3 of my 4 hard drives were listed. I shut down, left it for a few minutes, rebooted back, and selected my primary drive again. Then I went ahead and created an image of my primary drive just in case.I have no idea wh thought it might be a hard drive failure, or it could be something messed up in my motherboard. I have a 64GB Crucial M4 SSD drive that is less than a year old, along with an ASRock Z68 PRO3 motherboard that was bought at the same time.
My Gateway laptop running Windows 7 Home Premium (x64) recently crashed, and when I rebooted it, it displayed this: Windows failed to start. A recent hardware of software change might be the cause. To fix the problem:
1. Insert your Windows installation disc and restart your computer. 2. Choose your language settings, and then click "Next." 3. Click "Repair your computer."
If you do not this disc, contact your system administrator or computer manufacturer for assistance. Status: 0xc000000f Info: The boot selection failed because a required devices is inaccessible.
The thing is, I don't have a Windows installation disc! I was just browsing the internet when my laptop crashed, and now I can't do anything; repair your computer, safe mode, boot from last known good setting, etc. all result in the same error screen.
I made a system image backup from my ssd,then I bought another ssd to put the system image on,I tried when the 2nd ssd was completely empty; it saysthere is no disk to recover to ( or something like that )then I installed clean version of windows on the 2nd ssdafter that I tried restoring via the system repair disc but it kept telling me the same message
My wife's laptop had a virus and I think I have gotten rid of the virus, but I am having trouble getting some windows programs to operate. Pasted in is the FSS Log.
Farbar Service Scanner Version: 06-08-2012 Ran by Mom's Computer (administrator) on 11-08-2012 at 21:02:46 Running from "D:\" Microsoft Windows 7 Home Premium (X64) Boot Mode: Normal
I have a duplicate image of my windows 7 system. I want to move my windows 7 system off from my 2TB drive on to a smaller 500GB drive instead. I used an imaging program to duplicate the drive contents onto the 500GB drive. My question now is, is it safe to switch to my 500GB as my primary drive and boot up from it without affecting my Windows 7 activation status, or do I need to de-activate it first on the 2TB drive then re-activate on the 500GB drive?
I have just recovered my laptop toshiba satellite L505 es5018 windows 7 home premium 64bit to factory settings successfully. After that system start up but keep configuring system continuously. How may I solve this problem?.
i cant get windows every time i try i get the message "File:ootBCD Stauts: 0xc00000f Info: an error occcured while trying to read the boot conifguration data." ive tried going into windows repair from my repair cd but theres no os in recovery options
I am new to this but hopefully somebody out there can offer some pearls of wisdom? My Packard Bell laptop (I think it is called an "Easy note TJ71) model will not work. When I turn on the power a black screen telling me to "insert my Windows installation disc" choose my language and then click "repair your computer" appears.I copied recovery discs and driver discs etc when I bought it (about a year ago) but no "Windows installation disc".The system running on it is the Windows 7 one.Is there anything to be done (other than trying to contact Windows for a copy of the install disc).
I have two hard drives, C and D. I had Windows 7 installed on both at one point. Now, I only have Windows 7 installed on C. However, it still comes up asking which installation it wishes me to boot on startup.
I was getting annoyed by this, so I followed a guide that told me how to stop it, by unticking the "Wait 30 seconds before selecting" option.
Now, however, on booting, Windows automatically selects the WRONG installation, which gives me a 0xc000000f error with device inaccessible. I need to get into my C: version of windows to retick that box until I can figure out how to get rid of the menu the correct way.
Booting from disk to repair doesn't do anything, I've tried repairing both installations but it didn't help.
i am having trouble repairing the error. i have tried all the bootrec commands etc nothing is working do not really want to reinstall as it has important files on it . problem occured after wife installed some software that worked fine on her old xp system
"Missing operating system" massage is coming when i start my system and i am not able to start. I think because , i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
I had the brilliant idea to delete the manufacturer's recovery partition on my ASUS Win 7 64-bit laptop, and reclaim that space for my C drive, and now my system is unbootable. I get the error message "autochk program not found" then stop: c000021a Fatal System Error. I have run System Recovery several times to no avail. I tried to do a repair using the Win 7 DVD, but that didn't work either.
"Missing operating system" massage is coming when i start my system. I think because, i had given "mark partition as active" option for one hard dive (E) in disk management when last time i opened. it did not have any data. i did not know, this will make any problem. Now i am not able to boot windows re installation dvd also. i can only take BIOS settings.
i recently got a computer from my aunt, and decided to put windows 7 on it. Before I installed it, I put in a Geforce 8800 graphics card and a (2nd) cd rom drive. After 20 failed attempts to install windows 7 (it kept freezing at the completing installation part) it worked after i disconnected the new graphics card and one of the hard drives. Now, however, i keep on getting periodic blue screens with the following error messages : Memory Management, and PFN_List Corrupt. I ran a memory diagnostic and it said that the memory is fine. What is wrong with my computer? I also ran a system repair thing from the windows 7 disk, and it came up with this error: System File Integrity Check and Repair Error Code 0X490
My Hardware is:
AMD Anthlon 64 x2 Dual Core Processor 6000+ 2 Hitachi HDT725032VLA SCSI 320 gb hard drives Nvidia Geforce 8800 GS Graphics Card 3gb of system memory
when i click format a 150 gb partition space in disk management option i recieved the following message "An unexpected error has occurred. Check the System Event Log for more information on the error. Close the Disk Management console, then restart Disk Management or restart the computer". and the drive does not appear like other drives in MY Computer?
I recently re-installed windows and am now trying to install the DirectX End-User Runtimes (June 2010). All goes well, it installs everything, but as it finished I get this error: I have tried redownloading, using other installers and updating my graphics drivers. Nothing will work. It's probably worth mentioning that the first time I tried installing, about a week ago, my computer totally froze in the middle of the install and I had to force restart.
I am having difficulty with drivers on my Acer Aspire 5253 system using Win 7. It is a couple months old. Within the last month, I have been getting random blue screen of death error messages in which the computer shuts down to prevent damage. The computer boots up fine without any problems. The blue screen that I see contains the same information each time.
net book wont start. i turn it on and it says this----"status 0xC000000F windows failed to start. a recent hardware or software change might be the cause" this is on a acer aspire 1 netbook. it asks for a disk to repair it but the net book does not have a cd drive.
whenever I turn on the laptop, it seems to boot into Windows 7, in that the "Starting Windows" text appears and the little animation of colors forming the logo shows, but as some point it fails. This message appears on screen:autocheck not found - skipping AUTOCHECK After a few seconds a BSOD shows up, but too fast for me to make out what it says. It used to, but after some hasty fix attempts no longer does, cycle around to a menu that informed me of this error:Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible. Here's the longer history:As some point in the past I decided to try out dual-booting Windows 7 and Linux on the laptop. I got it to a state where this worked fine. I had partitions roughly as follows:[Ubuntu][Windows 7]([Data and files][Boot]) The parentheses denote a logical partition. The Boot partition was very small and only held what was necessary to launch GRUB. This week, I realized that I hardly ever used the Linux partition and decided to get rid of it to reclaim storage space. This is where the trouble begins. I rebooted into a thumb drive that could run GParted and modified the hard drive layout in the following steps: Delete the Ubuntu partition Delete the Boot partition Grow the Data/Files partition to take up the space left by Boot Shrink the Windows 7 partition to make it faster to move Move the Windows 7 partition to the front of the volume Expand it to take up the remaining space. What I ended up with was: [Windows 7]([Data and files]) My naive and fatal mistake was to trust that the Windows Repair CD could fix any boot issues, and also that there would be no catastrophic hardware failures. Both of these assumptions turned out to be false.
First, the laptop's CD/DVD drive has either broken or is too unreliable to use. I have noticed it becoming more and more unstable over time, but now (when I need it most!) it simply does not seem to want to spin up and function at all. This forced me to create a Windows Repair USB drive. However, I can't load any installation media. This is because the laptop did not come with an install DVD. It had a recovery sector, which I cannibalized for the Linux partition. I did copy the stock recovery stuff to a series of DVDs, but, well...This is all to say that any solution that requires a DVD drive is straight out until I can replace it, which I'd like to consider a last resort.My expectations for the Windows Repair CD/USB have been dashed. Attempting to automatically fix boot issues either fails for some specific reason (I can probably reproduce it and provide the details, if necessary), with a dialog to send a report, or fails because it cannot detect any problems. I have tried a variety of things based on my own research to fix this through the command prompt: Running chkdsk /x /r on all drives. Does not find any errors. Running various bootrec commands: /fixmbr, /fixboot, /rebuildbcd, /scanos. All complete successfully, but the last 2 report finding 0 Windows installations. Using bcdboot and bootsect to recreate the bootloader. Again, no errors result, but it does not fix the issue. I guess it should have been obvious that none of the boot record fixes would matter, since the laptop does boot into Windows 7, briefly.
My friend's laptop won't boot. You turn it on and the Advent symbol comes up and gives you an option to go into the BIOS or onto system recovery. It allows you to go no further. If you go to system recovery you can't even do anything, the typing cursor style thing is just flashing. He doesn't have the CDs to recover Windows 7 and restore it.Is there any way to restore? I also have an Advent laptop, would it work if I made a recovery CD from control panel for Windows 7 and then use it to boot and restore his Windows?
I was repartitioning a 3 NTFS partitioned 1,5tb drive down to one partition via win 7 Disk Management tool. I successfully shrank one of the partitions. After shrinking the second partition, win 7 had a hiccup and reported the remaining single partition is now in a 'RAW' format. I still have data on the drive that i would like to recover prior to reformatting it.Apparently, on reading up about "RAW' files, the data is still there. What i would like to do is to somehow view the data and extract portions of it at a time to other smaller hds. From what i has read i can only extract everything to another 1.5tb drive, which i just don,t have available. If i can find a solution, i will eventually reformat and reuse my 1.5tb drive.How can i extract portions of data from a "raw" drive to a second smaller drive?
I have my HP Laptop which came with Windows Vista as the OS. I want to upgrade to Windows 7 so I bought Windows 7 from my local store.I entered the disc and did boot from CD. It reached to the page where it shows the disk partition. I deleted the partitions and created new one. However, whenever I create the partition, it creates a primary one and gives me error saying Setup was unable to create a new system partition or locate an existing system partition.
My new laptop, after about 8 months of service, yesterday refused to be turned on again. No reaction to pressing the on button. The power supply seems to work. Before sending it for repair, I opened it and got the 2 HDs out in order to recodev some data using a SATA/USB adapter. Unfortunately, BOTH disks, when connected to another PC using the adapter, say that they need formatting. I tried to open a DOS window and typed : chkdsk e: /r It replied that the file system was RAW and chkdsk didn't work for it. When connected to a Linux PC, I can see the partitions but I could not mount them.
