ST3250318as S M A R T Status Bad
Oct 14, 2011what dhould i do i have an error problem upon loading my unit, it say that "ST3250318as S M A R T Status bad, back and replace"
View 2 Replies
ADVERTISEMENT
Boot Error Say's Status Windows Status 0xc0000428?
Jul 26, 2012So a couple of days ago my computer started to act up but this morning when i turned it on, i got a blue screen and it never wanted to turn on ever since. So i tried reinstalling Windows 7 again on the current system because i do not want to lose my pictures. Is there any way to fix this?
View 2 Replies View RelatedExplorer 8 Status Bar
Nov 7, 2009I was trying to find out the meaning of the messages that appear on the lower left of the Internet Explorer 8 windows (in the status bar). I was visiting a site (pcguide.com) and I got a weird icon in that spot. I am worried I might have picked up a nasty bug from that site, because I had a hard time closing it (windows kept popping up).
View 2 Replies View RelatedStatus Bar - Turn On Or Off
Feb 26, 2012How to Turn the Windows Explorer Status Bar On or Off in Windows 7 ?
View 0 Replies View RelatedShowing Skype Status On The Web?
Jul 3, 2010I'd noticed my Skype status wasn't being displayed anywhere on the web, Open Skype, navigate to Options, then to Privacy.
View 1 Replies View RelatedPC Status Potentially Unprotected?
Jan 3, 2013I have Microsoft Security Essentials and I updated andscanned and have the same ver 1.1.9002.0 as my other computer that is protectedso how can I get my computer protected with Microsoft Security Essentials? Isthere a time limit?
I just uninstalled and re-installed and that worked
Computer Won't Boot Status
Apr 30, 2012It's been about a week since my computer stopped working. Every time i try and turn it on I'm given the message[ Status: 0xc000000f Info: The boot selection failed because a required device is inaccessible.] I have burn a system repair disk that I acquired online but when i try the start up repair it never finishes, i know that the process should take awhile but I've left it to run for 10+ hours and still nothing
Basic Info:
-Lenovo Thinkpad T510 series
-Windows 7 32 bit service pack 1
Status Of Network Connection
May 12, 2012the status of my wifi say 522,000,000 sent but the recieve is only 50,000,000 bytes,is that normal or someone is using my wifi or my settings are not correct?
View 2 Replies View RelatedStatus Of Network Connection?
May 12, 2012the status of my wifi say 522,000,000 sent but the recieve is only 50,000,000 bytes,is that normal or someone is using my wifi or my settings are not correct?
View 1 Replies View RelatedHow To Activate Account Status
Oct 22, 2012Is my account now activated ?
View 5 Replies View RelatedXP Printer Status Offline
Nov 2, 2012Have deleted all printers, all drivers and am trying to reinstall HP OfficeJet PRO 8000 (series). One desktop, Win7, prints OK. Second desktop, XP SP3, will not print (print queue lists several documents, first one w/ "error".
View 6 Replies View RelatedToshiba Not Booting Up - Status 0xc00000e9
Nov 19, 2012Toshiba laptop showing a status 0xc00000e9. How do I bypass it?
View 2 Replies View RelatedFacebook Lags - Not Responding Status
Apr 13, 2012My Facebook lag so much. It always go on "not responding" status and keeps on lagging while I'm chatting. And some of my applications go wrong sometimes. I used HiJackThis but I can't do some cleaning because I know, there's something that shouldn't be deleted in order to keep your system running. I'll post the HiJackThis results and some of system specs.
View 1 Replies View RelatedNo Tasks Showing In Task Status?
Oct 2, 2011In Windows 7 64 Ultimate, the Task Status box in Task Scheduler is empty, even if I set it to "Last 7 days" and even though Tasks have run (I can look at individual Tasks and they show "Last Run" time as today.
I've also been having a problem where an instance of svchost.exe was using 25% of my CPU (Athlon II X4 630) and 170MB RAM. I tracked this down to the Schedule service although I haven't worked out what triggers it to happen yet. I have deleted some unneeded Tasks though, so perhaps that's fixed that problem.
Backtrack 5 And Windows 7 Status 0xc0000098
Feb 12, 2013I have recently installed Backtrack 5 kde with unetbootin.originally i wanted to install Backtrack on different drive than Windows 7 but since unetbootin wont let me i had to install it on the same one when choosing to unetbootin in the boot menu i end up with a message that ubnldr.mbr is missing or corrupt, status 0xc0000098 I have tried using EasyBCD to solve this but no luck?
View 1 Replies View RelatedCan't Boot Into Windows 7 Status: 0xc000000f
Dec 8, 2012i cant get windows every time i try i get the message "File:ootBCD Stauts: 0xc00000f Info: an error occcured while trying to read the boot conifguration data." ive tried going into windows repair from my repair cd but theres no os in recovery options
View 1 Replies View RelatedAdministration Status Blocks Customization
May 26, 2010I have tried to sort through the Admin fiasco in Win 7, default admin, "real" admin, just plain user, plain as mud, only M$ could create such convolution. I have Win 7 Ultimate and really like it....BUT....with a 30 inch 16 x 9 display, DVI in, hard to get a sharp screen....fonts in particular are blurred. I have gone through true type, no help.
Part of the problem is the "default" fonts. I think I know how to change them, but, big but, I cannot unlock the administration blockage even logged in as Administrator. I believe that is the problem as there is the gold & blue shield and the actions I want to take are grayed out, thus you can't click on them.
I have read others have set up an Admin with a password only to screw up their installation and I am unwilling to risk that as I have my OS set up just as I want it other than the font issue. Also, same problem in using the format capability of Win 7 for a hard drive, the gold shield/grayed out "format" cannot be accessed, again even though I am logged in as Admin.
Office 2010 Turn Off Status Bar?
Sep 16, 2010How do I turn off or hide the status bar in outlook 2010?
View 3 Replies View RelatedWindows Explorer Has A Pane Just Above Status Bar
Dec 19, 2011Win7's Windows Explorer has a full-width pane just above the Status Bar that shows some of the details regarding the item that is highlighted in either the Navigation or File Pane. How do I permanently get rid of this pane. I find that it is redundant and occupies precious screen real estate.I've tried the Classic Shell, Folder Options and the Organize->Layout possibilities.
View 1 Replies View RelatedDynamic Disk Status Errors
Feb 20, 2010After dual booting my drive, it was suddenly changed to an offline dynamic disk. My problem is, I can turn it back online, but it gives me the status of "errors" I checked around for the past 12 hours, and everything says the same thing, turn it back online (it is) Reactivate it (That command is grayed out) Use Dynamic disk converter 2.1 (Says offline even though CMD says it is online)
Now, I am a bit frustrated, after 6 hours or so, my entire PC crashed, I did nothing special to cause this but hey it did. When I would boot up it would give "error loading OS" I checked all my drives, they're working PERFECTLY fine so I have no idea what is causing this. After I inserted my Windows 7 CD it seems to boot up fine now. I have two separate drives, one to handle my main OS being Windows 7 and the other to handle all my media which is the one that I cannot access anymore.
After reading dozens of articles I cannot find any solid answer that work for my case.
I am using the Windows 7 disk manager not a third party program, also, I have read all the 'help' from the microsoft website there is to deal with this problem. But nothing seems to work.
To help literate a bit more this is what my Disk Manager looks like:
Disk 0 Primary partition
Basic
38 GB
Online
Disk 1
Dynamic
errors
When right clicked on Disk 1 everything is Grayed out except properties, help, and Offline.
I don't know if any of this information will be of any help, I am trying to literate as much as I possibly can and give any evidence that might help.
Anyways, this entire thing has given me a huge headache and I have a huge term paper due x_x...
All Installs Hang At Status Phase?
Feb 3, 2013I have no idea what caused all of this to start happening. Maybe force quitting an install? I tried Googling the problem but every fix I tried didn't work; I don't think I've found my exact problem yet. I tried restarting, looking in the services (it wasn't able to be shut down, msiexec or something?), and using the Windows system scan. The Windows System Restore hangs too - so I couldn't do that either. Installers that failedEvery one that I have tried since it first started - Nvidia graphics drivers, windows 7 tools, uninstallers, etc. Windows 7 x64 UltimateIntel i7 3770kMSI GeForce GTX 670 Power EditionCorsair Vengeance 1600MHz 8GB x 2ASRock z77 Extreme 4Corsair 750 Watt Gold + Certified PSUOCZ Vertex 4 256GB SSDSeagate Barracuda 2TB HDD
View 1 Replies View RelatedBlack Screen/Status 0xc000000f Showing?
Oct 29, 2011I am new to this but hopefully somebody out there can offer some pearls of wisdom? My Packard Bell laptop (I think it is called an "Easy note TJ71) model will not work. When I turn on the power a black screen telling me to "insert my Windows installation disc" choose my language and then click "repair your computer" appears.I copied recovery discs and driver discs etc when I bought it (about a year ago) but no "Windows installation disc".The system running on it is the Windows 7 one.Is there anything to be done (other than trying to contact Windows for a copy of the install disc).
View 5 Replies View RelatedExternal HDD Lost Status Bar In My Computers / How To Get It Back
Apr 20, 2011if you go to "my computer" you will see your hdd status has a blue bar that displays what data is used up and how much free data you have left.anyway i renamed by external hdd and the blue display bar is gone. i still can right click on on my external and at the bottom it shows up the status, but the blur bar is gone.i had another external and it happen, i jsut formatted and the blue status bar was there again.is there anyway to get the blue status bar without formatting my external hdd?
View 1 Replies View RelatedWireless Icon Showing Wrong Status?
Dec 3, 2012So I have a Atheros 9285 wireless card in my laptop, but now for like 3 months it keeps saying that I'm not connected to a network while in fact I am connected to my wifi network.I can browse the internet and all that but I can't use my homegroup.. was wondering if you guy's had a solution for me...Things that i've tried already:1. Updating/renewing my drivers.. Removing vwififlt.sys.3. Replacing vwififlt.sys4. ebooting my computer.5. Connect to a different network.
View 3 Replies View RelatedCanon Pixma Printer Status Monitor
Jan 13, 2009I have Windows 7 (7000) installed. Everything working except Windows 7 did not recognize my Canon Pixma iP8500 printer. OK under Vista. I manually selected a driver for Canon Pixma Pro 9500 and then re-configured the printer as an 8500 via the "advanced" tab in printer properties. Printing seems to be OK, but the Canon status monitor application can't seem to talk to the printer over the USB interface. Any ideas?
View 6 Replies View RelatedTCP Established Status Even After Network Cable Unplugged
Aug 11, 2011I have an application that establishes a socket connection w/ another application on a different machine. When this connection is disrupted (e.g., pull out network cable), I recognize this condition and take some action.
In a Windows XP 32-bit environment, this happens quickly ... in seconds.
In a Windows 7 64-bit environment, this happens slowly ... in about 5 minutes.
If I run netstat in the Windows 7 environment, the TCP connection shows established for about 5 minutes after the network cable has been unplugged. (In WXP, it changes in seconds.) I've searched the forum and have heard a few people refer to 5 minutes as being a "default" timeout value. I've also looked at the TCP spec, etc. to learn a bit more, understand it better, etc. in an attempt to find something I can configure to reduce the 5 minutes to seconds but I've not run into anything yet.
Status Code 13 Connecting To A DI-524 Dlink Router
Feb 9, 2009I'm having a strange issue with my Windows 7 Lenovo S10 netbook and a friends WEP enabled router. I am able to connect to my home network wr54g linksys on WPA and at the office there's a guest network running (oddly) a 104bit WEP that I can use. However at my friends house I was trying to connect to his DI-524 Dlink router and recevied some very strange (to me) messages.
I'm wondering if Windows 7 has some kind of issue with older versions of WEP and possibly lower encryption? Potentially could it be simply that if we kick up the encryption it will work? I'm fairly confident that if I convince him to kick it to WPA it will work - but where's the fun in that.
Status Backup Canceled After Image Restore
Nov 6, 2009Today, this morning, I did a system image restore, just to test if it works.
The system image was included in the backup of yesterday, 11/5/2009.
The image restore went smooth, Windows 7 is correctly restored and is running like it always did.
One thing I do not understand, the status of the backup is The last backup was canceled, and also the size of the backup is Not available
I hope someone can explain why this is?
Status: 0xc0000225 Windows Boot Error?
May 31, 2011i have a weird problem about my computer. firstly my dvd-rom doesn't work correcly ( i have changed my first dvd-rom cause of same problem ) . and last two days pc started to work very very slow. it opens in nearly 15 minutes and shut down in same time. i am facing with this error when i shut down before i waiting the opening screen of windows. and when this error comes it says1) continue bla bla2) do system restorewhen i select system restore it gave an another error like "cannot access required driver".
View 1 Replies View RelatedINF File Txtsetup.sif Corrup Or Missing Status 18?
Feb 22, 2012INF file txtsetup.sif corrup or missing status 18?
View 1 Replies View RelatedLocal Disk Management Status Failed?
Sep 19, 2012I searched the forum and had seen a similar thread , but lost track of it and so i decided to post a new thread.My problem is this-My Laptop hard disk of 500gb shows missing in the Local Disk Management & the status indicates FAILED.It so happened that by mistake I formatted a drive (H: ) using a program WintoFlash. & the problem was i had ran the program from the H: drive itself. So i ended up formatting the H:half way & the laptop restarted. Since then it didnt load the OS.I finally decided to remove the hard disk from the laptop & hook it to a spare computer which i already have . (500gb & Windows 7 installed)I checked My Computer & the drives didnt show up. So i checked the Local Disk Management & found a cross mark on my hard disk. & it showed missing. & status as Failed.his is how it looks:Shot at 2012-09-19Is there anyway i can get my data back?
View 7 Replies View Related