My laptop hard drive is formatted as Dynamic, but i want to convert disk to Basic and restore the same system and continue work. i used backup and restore to create system disk and saved on a external hard drive, my question is if i restore the system image will restore process create dynamic partition or basic when restoring? will there be a option to select with partition table i want to create before restore?
View 1 RepliesLast night as I was attempting to install Windows 8 RP to test it out, I decided I would do a dual boot incase I didn't like it. It downloaded, burned fined and I went to make a new partition, and this is where things went south for me. It converted every disk to dynamic once I had created the new disk to install it on and for the life on me I can't get it to convert back to basic, so I'm pretty well screwed if something goes wrong. Things I've done:
1) Attempt system restore - Ok, so I didn't have a restore point created so this is of no help.
2) I followed this guide found here on SevenForums and attempted all 3 methods - nothing worked Convert a Dynamic Disk to a Basic Disk
3) I downloaed EaseUse Partition master to attempt to change dynamic back to basic, and still a no go.
4) Tried to install Windows 8 again and it would not let me delete the current dynamic disk partitions to start over
5) Tried HP recovery tools to set the computer back to factory condition and it wouldn't work.
Is it possible to delete everything and start over from scratch or will it still be dynamic? At this point, i want a time machine so I can go back before ever attempting to make a dual boot.
How to Convert a Basic Disk to a Dynamic Disk ?
View 0 Replies View RelatedHow to Convert a Dynamic Disk to a Basic Disk ?
View 0 Replies View Relatedwhile converting dynamic to basic we need any external hard disk for backuping or by software we can do it????
View 4 Replies View RelatedWhen I am trying to partition new drive from C drive. My C drive have 450 GB Space, so wanted to make a new drive of 250 GB. Did the basic steps but when clicking on Finish I get the following error "The operation you selected will convert the selected basic disk(s) to dynamic disk(s). If you convert the disk(s) to dynamic, you will not be able to start installed operating systems from any volume on the disk(s) (except the current boot volume). Are you sure you want to continue?".
View 1 Replies View RelatedI wanted to make a new partition on my hp laptop on the only disc it as.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly.As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd
View 4 Replies View RelatedI am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies View RelatedI wanted to make a new partition on my hp laptop on the only disc it hasso as to create a system image.Unfortunately,because it came with already 4 partitions I accidentally turned the disk into a dynamic disk.Now its booting normally but I cant load the system Image that I have created before the partition.Other than that the pc is running smoothly. As I said this is the only disk on the system.Is it possible to convert the disk back to basic?After a lot of googling I found some exmples but all of them assumed you had a second disk on your system.Is it possible to convert the disk back to basic without having to reinstall windows?(I have no windows cd)
View 1 Replies View RelatedUsing preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedHow to convert windows 7 home basic to windows 7 professional?
View 1 Replies View RelatedI've 4 Partition created on my Hard Drive..!!1. System Usable Partition (Reserved for System by its own)2. Local Partition (In which Windows is Installed)3. Another Partition (for Storage purpose)4. One more Partition (for Storage purpose)So, when today I tried to shrink my one of the partition (except system usable & C Drive/Local Drive) the the Windows alerted me with the Message : "Your Operating System won't boot after changing the drive to Dynamic Drive" ....!!After this message appears I clicked yes..!!The partition is been made
View 10 Replies View Relatedafter shrinking my hard drive it has changed to dynamics and i cant even install windows on a different disk,what shuold i do?
View 2 Replies View RelatedI am going to try to create a second partition on my hard drive and the software I am using to do this (MiniTool Partition Wizard) says I should back up everything in case something goes wrong. I have made a system image on another portable hard drive. I have an OEM version of windows 7 and I am wondering whether i can boot from the disk and use it to restore my system from the system image I have created in case something goes wrong.
View 7 Replies View RelatedI have an HP laptop with Windows 7 home premium. When using the HP Recovery manager to create system restore disks, everythong goes ok until I get through the point where it tells me that I will need 4 DVDs and that I should insert one. After inserting the disk, the drive spins for a coouple of seconds, then I get the messages:"There was a problem burning this disk.""There was an error burning this disk. The disk might no longer be usable."I retried several times, inserting different blank DVD-R disks, but always get the same result
View 6 Replies View RelatedI have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
View 1 Replies View RelatedI currently have a windows seven cd disk that I purchased from retail and recently I have tried to see if I could use the data partition that came on my laptop in order to recover my pc when I tried to launch system recovery from the bios it would just boot to windows normally. instead of trying to start up system recovery using a partition I wanna know how do I make a partition on my pc, and how do I turn that partition into a recovery partition using my purchased copy of windows 7 that would all me to be able to use that partition instead of a disk in order to reinstall windows.
View 3 Replies View Relatedi want to know how to use the maximum disk space slider in the system restore page.
View 3 Replies View RelatedMy laptop crashed the other day after a Windows update. To make a long story short it would not boot up. I tried several things to no avail. System restore disc did not work. At this point I thought the hard drive was fried. Finally I stuck the the Windows 7 companion disk and got the system to boot I can tell all my files are there somewhere due to amount of memory taking up on the hard drive. Anyways my main problem it is now asking for the product key although I have 29 days which unfortunately I cannot find. Laptop in question is a Lenovo G550. Where do I go from here? Do I have to purchase a new key? I've been using the laptop since and it seems to be working properly as far as i can tell.
View 5 Replies View RelatedAs you may see I am connected to the internet but I cannot see the signal bars on the taskbar.my laptop information:Toshiba Satelite M645 S4070Windows 7 Home Premium. 64-bitI also cannot do a system restore of the check disk error i am seeing.below is an image of the results:[CODE]
View 2 Replies View RelatedSystem Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies View RelatedDoes anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View Relatedso i got this cool Hp laptop... nice the bad part ... I had a single 500 gb Hard disk. only two partitions ... experimented to partition it ... 1. I upgraded my basic drive to dynamic drive ( got four partitions now) 2. My OS (win 7 home premium x64) is on one of the partiotion on the dynamic disk. QUESTIONS How do i convert back to basic... i only have my OS key no install cd? Can i take a back up or sys image that i can use later on after converting my hard disk to basic?
View 1 Replies View RelatedI stupidly changed the ownership of my windows 7 ultimate system files and program files folder in an attempt to share music and such from another laptop. I aborted this after numerous tries. Frustrated and fed up I decided to cut, copy and paste all my music via USB. I tried to launch iTunes (which I'd done many times before) and now I get a message that saysC:Program Files (x86)Common FilesSymantec...eeCtrl64.sys So naturally I re-downloaded iTunes, alas, same problem appeared with a different message which said"The folder path 'Program Files (x86)' contains an invalid character"I tried a couple of methods on your site but, either I didn't do it properly (likely) or they just didn't work.
View 2 Replies View RelatedI want to setup a Raid 1 mirror from one drive to another using Windows software raid. I know in XP you could not do this on the boot partition (C drive). Is it possible to do this in Windows 7?
View 2 Replies View Relatedmy hard disk converted to dynamic.now it is not booting, it have 300 gb data .i need convert in to basic and working normally.
View 2 Replies View RelatedI was setting up a Win7 new build with an Asus P8B75-V and an SSD. Although I previously have done clean installs with UEFI motherboards and SSDs, this time the install DVD created a GPT volume on the boot disk (much to my surprise and which I discovered opnly after loading all the apps, moving the email, etc, etc.).
Knowing a lot more about basic MBR volumes (and how to fix problems), I would like to convert the GPT to a basic volume. I have Acronis DiskDIrector 11 which can convert the GPT to MBR, but when I tried that, it rendered the disk unbootable. (The conversion resulted in a 124MB unallocated space, followed by a 100MB FAT32 volume (!?!?!), and then the rest of the drive as NTFS.)
Is there a way to convert a boot disk from GPT to basic and have it be bootable? Is there anything that can be done with the converted HD to make it bootable?
i can not install dual-both window7 and window8 on my computer.i think that may be my hard is dynamite.not basic.
View 13 Replies View RelatedHow to Convert a MBR Disk to a GPT Disk ?
View 0 Replies View RelatedHow to Convert a GPT Disk to a MBR Disk ?
View 0 Replies View Relatedi installed 32 bit windows 7 ultimate edition , when i am trying to install sql server , i get u need 64X bit operating system error message occurs
View 3 Replies View Related