Creating System Restore Disk Windows 7?
Apr 8, 2012
I have an HP laptop with Windows 7 home premium. When using the HP Recovery manager to create system restore disks, everythong goes ok until I get through the point where it tells me that I will need 4 DVDs and that I should insert one. After inserting the disk, the drive spins for a coouple of seconds, then I get the messages:"There was a problem burning this disk.""There was an error burning this disk. The disk might no longer be usable."I retried several times, inserting different blank DVD-R disks, but always get the same result
View 6 Replies
ADVERTISEMENT
Feb 12, 2012
My wife has a Compaq Presario CQ61 laptop computer. Windows Explorer shows a D: disk called Recovery. I am assuming that is what is used to restore the system to new by pressing one of the F keys on startup. Is there a way to create a backup disk using this partition? If this hard drive was to fail, I would lose everything on C: disk and would also lose the recovery partition. Have Googled this, but all I can find is the procedure to reinstall using the F key.
View 8 Replies
View Related
Jan 15, 2013
On my system I have an SSD, so I have (Windows Restore) turned off. When I download a program and try to install it, it says creating a Restore Point and sits there for a while. A long while. I have found that I can go into Safe Mode and install things with no problem, fast. Even after it is satisfied with the restore point and says it is installing, it will just sit there and drag on. What can I do to get things to install without Safe Mode?
View 9 Replies
View Related
Feb 5, 2013
I am losing my system restore points and my computer is not creating them on its own.
View 5 Replies
View Related
Jun 2, 2009
I am running Windows 7 RC on my Samsung NC10 netbook. I would like to create a system restore disk to allow me to restire system images, etc. However being a netbook the NC10 doesn't have a CD/DVD drive and while I can use an external one, it would be much easier to have the repair disk on a Flash Pen Drive.
Can anyone help me to create a repair disk on my pen drive?
View 1 Replies
View Related
Dec 6, 2011
I bought a new laptop yesterday and today decided to create a system repair disk. I inserted a blank DVD RW and started the process the progress bar went to about 60-70% (estimate, does not give actual progress %) in half an hour and has now been at that exact same point for the last 5 hours. I have had no errors and the window still says "creating disk..." and it still sounds as though the DVD drive is still writing onto the dvd. I Wouldn't think it would take this long to create especially with no progress.
View 2 Replies
View Related
Dec 28, 2011
I am trying to restore my computer because it launches into system recovery. After I get to the recovery options I tried to do system restore but it tells me there isn't enough space on the disk.
View 6 Replies
View Related
Oct 2, 2012
Using preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies
View Related
May 31, 2012
I currently have a windows seven cd disk that I purchased from retail and recently I have tried to see if I could use the data partition that came on my laptop in order to recover my pc when I tried to launch system recovery from the bios it would just boot to windows normally. instead of trying to start up system recovery using a partition I wanna know how do I make a partition on my pc, and how do I turn that partition into a recovery partition using my purchased copy of windows 7 that would all me to be able to use that partition instead of a disk in order to reinstall windows.
View 3 Replies
View Related
Jan 12, 2013
My laptop crashed the other day after a Windows update. To make a long story short it would not boot up. I tried several things to no avail. System restore disc did not work. At this point I thought the hard drive was fried. Finally I stuck the the Windows 7 companion disk and got the system to boot I can tell all my files are there somewhere due to amount of memory taking up on the hard drive. Anyways my main problem it is now asking for the product key although I have 29 days which unfortunately I cannot find. Laptop in question is a Lenovo G550. Where do I go from here? Do I have to purchase a new key? I've been using the laptop since and it seems to be working properly as far as i can tell.
View 5 Replies
View Related
Dec 29, 2011
I am going to try to create a second partition on my hard drive and the software I am using to do this (MiniTool Partition Wizard) says I should back up everything in case something goes wrong. I have made a system image on another portable hard drive. I have an OEM version of windows 7 and I am wondering whether i can boot from the disk and use it to restore my system from the system image I have created in case something goes wrong.
View 7 Replies
View Related
Jul 19, 2012
My laptop hard drive is formatted as Dynamic, but i want to convert disk to Basic and restore the same system and continue work. i used backup and restore to create system disk and saved on a external hard drive, my question is if i restore the system image will restore process create dynamic partition or basic when restoring? will there be a option to select with partition table i want to create before restore?
View 1 Replies
View Related
Jan 1, 2013
I have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
View 1 Replies
View Related
Aug 23, 2012
i want to know how to use the maximum disk space slider in the system restore page.
View 3 Replies
View Related
Aug 26, 2012
As you may see I am connected to the internet but I cannot see the signal bars on the taskbar.my laptop information:Toshiba Satelite M645 S4070Windows 7 Home Premium. 64-bitI also cannot do a system restore of the check disk error i am seeing.below is an image of the results:[CODE]
View 2 Replies
View Related
Sep 12, 2011
I have my Windows 7 Pro install disk which does not have SP1 on it. I have Roxio Creator and I want to create an bootable disk image with Windows 7 Pro and SP1 so when i install Windows 7 it was also install SP1. Can I do this with Roxio Creator or will this take something else?
View 1 Replies
View Related
Aug 6, 2011
I need to a system restore point file without getting into the desktop through Windows 7.
View 3 Replies
View Related
Apr 10, 2012
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies
View Related
Aug 10, 2011
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies
View Related
Feb 15, 2013
I am not sure if this is possible however is there a way of installing Windows 7, ctivating it with my OEM key and then created a recovery partition just in case I am ever in the situation where I need to run it using a hot key during boot?
View 8 Replies
View Related
Aug 8, 2010
I have a computer with the F10 option when I first turn on the computer. The hard drive failed so I have replaced it and installed windows 7. I am wondering if I can create a recovery partition when I turn on the computer and use the F10 option to restore back to when I first installed windows 7?
View 9 Replies
View Related
Oct 15, 2012
I am attemptin to make a backup image of my hard drive. The new Image will be complied on an external hard. The drive has a 1TB Capacity with 450 Gigs free. I am receiving an error code during the image compilation stating that there is a problem with the I/O device. I ran chkdsk and found no problems. I also switched USB ports just to rule that out. I have used this same external hard drive to image a different laptop with no issues last week. My next approach would be to try this in safe mode. When I am in safe mode, I cannot find the location of the software which windows uses to create the image. I typed the location into the address bar and it pulled up a link in the address bar which took me back to the control panel. Can anyone tell me if this is possible to do in safe mode and if not, what my next step would be. Windows error: The Operation failed due to a device error encountered with either the source or destination. If the source or destination volume is on a disk, run CHKDSK/R on the source or destination volume and then retry the operation. (0x8078012D) Additional Information: The request could not be performed because of an I/O device error (0x8007045D)?
View 2 Replies
View Related
Jun 30, 2012
I have 3 identical PCs with 2 partitions: C and D.I created a system image for one PC, C only.But when I restore that system image into the other 2 PCs (using Wind7 DVD), it formats both C and D and restore.The problem is that I have data on D and I don't want it to be formatted. I only want to restore the C image.
View 9 Replies
View Related
Sep 21, 2012
My laptop has been backing up once a week fine (except for an error about a missing file that is on the target drive, not the backup drive) for months. In the past few days, it has suddenly failed with repeated attempts to backup, it always stalls at 57% while creating a system image. I've tried a clean boot, same results. I'm backing up to a network drive (USB hard drive attached to the router), 274GB free of 458 total, and the total backup size has been pretty small as no heavy data is kept on the computer.
Lenovo SL510
Windows 7 Professional
View 1 Replies
View Related
Aug 27, 2009
I installed 7 on my Dell laptop that has no CD-ROM drive. I created a partition (D and set it to Active, installed from that partition, doing a quick format over Vista (C.
All was fine and dandy, but I was getting some boot option, I'm assuming because the Active drive had the install files on it. No problem, I'll set the C: partition to Active.
Reboot, should go away right? Wrong. "Bootmgr is missing."
No problem, there has to be a way to fix this. I'll put the CD in and recover... Or not!
What I have is a 2 gig USB thumbdrive, is there anyway to fix this problem with that? If not, what are my options.
Using the factory Dell restore to get Vista back won't work, I bought the laptop secondhand and they screwed that up.
View 1 Replies
View Related
Sep 4, 2010
I have one HDD C: with Windows 7 64bit and another HDD from my previous dual boot PC with two partitions C: and E:, both winX pro.How is it possible to combine both HDDs, creating a multi boot system having as C: my Windows 7 drive?
View 2 Replies
View Related
Nov 9, 2012
My computer's hard disk's files are automatically creating shortcut files. I trying it to remove but, it comes again.
View 1 Replies
View Related
Aug 25, 2011
My Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies
View Related
Jan 14, 2013
I lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies
View Related
Sep 5, 2012
I have a workstation on a gaming rig. I work and play games on it. I wanted to ask if I could separate my work files and GAMES setups (installed files) so they don't harm my work data.I do play games with cheats/hacks and they mostly contain malicious files which can damage my operating system. I want to create a seperate DISK image like Vmware in which I can run games without being worried about any harmful files accessing my work partition.
View 5 Replies
View Related
May 8, 2011
When i got my 500 gig internal HD, I messed up and the C: partition is too small. I can't move anything else outta the C partition into the much larger D partition. SO now I want to create a system image on my external HD, so I can re-install Win7 Pro, and not use any partitions. WELL, when i try to create a system image on this external, which sez only needs 396 gig,Windows tell me the external doesn't have enuff space for the shadow volume? There is nothing ON this external. Has 434 of 465 gig free. SO why is that NOT enuff space?
View 2 Replies
View Related
