So I booted into my other hard drives win 7 pro installation. Then I saved that system image onto my hard drive where the new windows 7 pro install is. After booting into the new windows install, then rebooting and going through the wizard and using the backed up image from the old windows 7 pro install it appears as if nothing is installed, no programs, drivers, themes, visuals etc. It's as if I didn't do anything at all.
View 9 RepliesUsing preinstalled Win 7 Home Premium 64bit on an HP 6813w Pavilion. The original hard drive, a Hitachi HDS721010CLA332 1Tb crashed.1) System Recovery discs was made along with a System Recovery with System Image disc.2) A more current System Image was made on an external hard drive.The Hitachi was replaced with the same model. Checked bios to make sure it was installed correctly.Under System Recovery, Image Restore, Select a System Image Backup there is nothing in the table to choose from as far as a source (disc drive or external drive).A) System Recovery (3 discs) has the HP preinstall file folder on the 3rd disc but is not read by the System Recovery program.B) Under System Restore, Image Restore, Advanced, it asks for a network or driver to be installed. That opens up the directory of C: which is the external hard drive. Under WindowsImageBackup the computer name is identified followed by three entries:[CODE]It seems to me the Recovery and System Restore discs are not functional. Am not a technical person but I have taken this as far as I know how at this point.Printed out all the instructions from HP and Microsoft to follow step by step but the failed discs will not allow me to move forward.
View 2 Replies View RelatedI'm trying to backup my files and create a system image on my secondary hard drive (a Caviar Black 1Tb) when windows backup shows me this message, when I prompt for more information, it says "A system image cannot be saved on a drive that your computer boots from or Windows is installed on." I checked disk management and the Caviar Black is NOT marked as a System disk, I can't find any help online and this is really pissing me off as I have no other way of creating a system image... It worked when I first put my computer together, but it's been a few weeks that I've had it and now it's giving me these messages..
View 6 Replies View RelatedBeen awhile since I've been around here. I'm stuck with a new problem. My desktop's OS hard drive crashed/is crashing. After testing several pieces of hardware and reseating numerous items, I got lucky and was able to boot into safe mode, once. My event viewer is full of disk errors. Pages and pages of disk errors. *Side note: Sure would've been nice if Windows would have said something */End Side note* So I have a Windows System Image and Windows Backup on a secondary drive that appears healthy. But I'm just curious what I'm looking at when my new hard drive gets here.Has anyone ever used the Windows 7 Image Backup/Restore utility? Can you use the image on a different hard drive or just when repairing the original? Will my programs be saved or just data? Just curious questions. All of my Google searches are bringing up reviews about the utility from the Win 7 RC days so I'm not real sure what I'm getting myself into here.
View 2 Replies View Relatedi have recently taken a system image of my entire system,using Windows own.Ä° would like to hear from anybody here,who has done,the same,AND restored the image successfully
View 3 Replies View RelatedI have a HP pavilion p6823 and one day it wouldnt go past the blue hp screen that has the setup and BIOS options. Well I used a system repair disk and it told me i needed system image disks so I put the last disk in like it said, and now it is giving me this message.Error details: Windows did not find any fixed disk that can be used to recreate volumes present in backup. Ensure disks are online, and disk drivers are installed to access the disk(s). 'diskpart.exe' tool with list disks command can be used to see the list of available fixed disks on the system.
View 4 Replies View RelatedI am trying to restore a bran new install of win 7 with a sytem image created previously before a hardware failure.The machine is a lenov think centerClean install installed and the image is about 70 gig It is house on a 1tb external driveThe internal drive on the machine is 160gbI get to the restore screen it finds the image then gives me the first errorSays you must boot the machine for a recovery disk then try againOk so i stuck my usb stick in and started up it, clicked repair my computer , found the image, and started it againNow it throws the 80042407 error. Active disk in Bios is to small.How is that possible. The image is 70 gig the hard drive is 160 gb?
View 4 Replies View RelatedI was wondering, there seems to be four ways to restore a windows 7 system image:
1. Backup and Restore --> Recover system settings and computer --> Open System Restore --> Choose System Image Restore Point.
2. Backup and Restore --> Recover system settings and computer --> Advanced recovery methods --> Use a system image you created earlier to recover your computer.
3. Boot computer from system repair disk and choose the appropriate option
4. Boot computer from win7 installation DVD and choose the appropriate option
What is the difference between these four ways of restoring or are they completely equivalent? How about the options in the system restore (checkboxes, etc..), I don't think they are self-explanatory, do you have any links where they would be explained well?
I am attempting to restore from a system image, but keep receiving a boot manager error message: Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible
The computer boots no problem normally, it is only when restarting to restore the system image.
So way back when I installed windows on my SSD I made a system image restore doohickey, using the "Create A System Image" tool, once I had applied all the necessary settings, installed drivers, etc. Now, windows is experiencing problems and I wish to restore to this back up. How on earth do I do this? The images don't have any kind of runnable-files inside to use. And when I use the recovery disk it says it cant find any image. Ive explored windows various restore utilities and the likes, and at no point does it simply say something like "Please select the file location of your restore image". I have the system image doohickey just sitting there...how do I tell windows to just use that backup? It all seems to be trying to do it in some automated fashion..
View 6 Replies View RelatedI just installed a ssd harddrive. Windows (7) backup discs ran fine. System image restore seems to have worked fine, only thing is programs are not showing up. This is my first time doing this and everthing I read, prior to, lead me to believe the programs would be included in the system image.
View 5 Replies View RelatedI currently can't make a system image or restore point. The error I receive for the system image attempt is: The backup failed. Windows Backup timed-out before the shared protection point was created. (0x80780021)
View 9 Replies View RelatedWhy does windows put two drives in the "Include a system image of drives" option ?
I only want to backup C:
What is causing this?
My F: disk is only storage no system files as i know of.
All discussion will pertain to Windows 7 Backup w/ NTFS disks w/ample space. Period. It shouldn't matter if the disks are simple or dynamic. The simple situation is this: I have one simple NTFS boot disk that failed months after system image backups to my other internal HDD. So then I replace this boot disk w/ a new one. So Am I able to restore the system image from the HDD onto to the new boot disk?
View 4 Replies View Relatedi been thinking of upgrading to windows 8 but i might have to go back to windows 7 if things don't' work out as its a possibility.my question is if i return to windows 7 will making a system restore image install all my drivers i need once i go back to windows 7 going back to windows 7 with re-installation DVD
View 1 Replies View RelatedI just purchased a new lenovo v570 laptop runing windows 7 home premium. I scanned an image using my Epson NX 400 usb all-in-one printer. Then I tried to save it to my external USB enclosed sata drive. I haven't had any problem like this before. They said, I didn't have permission. I am running the laptop as an administrator. What other permission do I need? Antivirus and firewall software is all up and funny functional.
View 4 Replies View RelatedI need a little help figuring this out. I made a backup image a while back on my network. Now that I want to re-image, I reboot as requested, wait for it to load, and Windows says it can't find my backup, "if it is on a network, close this window , type the network location."Putting in the network location does nothing, I'm just returned to the screen where it would list the backup image if it had found it, but there's nothing there.Thinking perhaps my NAS was the problem I copied the image onto a portable hard drive, but after rebooting into the restore program, Windows 7 doesn't find the USB drive.
View 9 Replies View Relateda serious disruption caused me to have to reinstall windows 7 again, but the old windows 7 copy(windows.old) was saved. however, the outlook 2007 contacts and e-mails were never saved, so now, how can i retrieve the e-mails and contacts?
View 3 Replies View RelatedMy c: is 128 GB and darn near full. I have Win7 and most used programs on it. My b: (179 GB of 500) has my libraries and less used programs. I have a single windows image backup of both B & C on an external drive.
For example if I purchase a 500 GB hard drive can I restore that image to the new drive? Will it partition the C from the B on the new drive or just show it as seperate folders?
Does the new drive have to be greater than the sum of the allocated/unallocated space on both drives even though the image is less than 500GB?
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies View RelatedOS: Windows 7 Home Premium 32 bit The windows system image backed up on my external hard drive (2TB WD USB3) is not showing while restoring the PC from an image.
The only option available is my hard drive partition on which i also had saved a system image. Though windows recommends External hard drive for backing up image when backing up the system.
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies View RelatedI'm on a brand new HP computer running Windows 7 and everytime I download a file from the internet or even save files from local programs to my desktop, they are saved as some sort of hidden file...or at least they behave similar to hidden files. The difference is if I open up an Explorer window and browse to my desktop, I can see them there that way, but there is no icon on my desktop for the file. I CAN see the the saved file on my desktop if I turn "view hidden files" on...but when I look at the properties of said files, they are not actually marked "hidden." I can even copy/paste that same file in my desktop and I will see the copied file show up visually on the desktop, but still not the original file unless I browse to the desktop in an Explorer window.When right clicking the desktop, "Show desktop icons" is turned on and I can view all of my other desktop file icons, shortcuts, etc.
View 2 Replies View RelatedI am running windows 7 home premium, upgraded from Vista. This is a Dell inspiron 1525. I have a recovery partition on the hard drive (E). When I startup, choose F8, choose "repair my computer" I have no option to restore from the recovery partition. There is no "dell data safe / recovery" option. I have heard this is due to my upgrading to win7. Two questions: Am I right in believing that the problem was caused from the upgrade? (even though the recovery partition was untouched).....2nd Question: if I first format the C: drive will it cure the problem?
View 3 Replies View RelatedI am installing Mac on my PC and that requires me to reformat and wipe my partitions. I made a backup of my whole windows partition and am storing that on a separate PC. When I install Mac I will have 2 partitions.Here is my question:Is there any way that I can restore my Windows backup (VHD) to a specific partition on my drive without wiping my whole drive? I want to set up a dual boot with Mac
View 9 Replies View Relatedi have changed my hard disk on my dell inspiron 1440 but and i have install windows 7 ultimate x64, but when i activate my windows, my laptop does not boot. its probably about my bios since i have install a new hard disk and i need to restore my factory image
View 2 Replies View RelatedI get a failure notice when I try to restore from the image saying that I don't have a valid drive to restore to. I am imaging from a 500 Gig and trying to restroe to a 750 Gig that I am putting into to replace the 500.
Ghost 14 is not compatible with Windows 7.
Just a little follow-up info:
I am using the same computer only trying to upgrade the HD.
I am using Windows 7 Pro RTM (Legitly).
I don't want to go through having to rebuild everything from scratch again.
I am putting the 500 in my camera monitoring system.
I have taken the following 3 steps so far: 1) I've created identical partitions on the 750 to match the 500 2) I've deleted all partitions 3) I have ghosted the Windows 7 partitions to these partitions (setup old Vista Drive and imaged the Windows 7 partitions).
No luck so far.
I am getting a failure notice while trying to restore to a new HD (going from a 500 to a 750).
The message tells me that I don't have a valid HD to restore to.
The image is on a 1.5 TB and the primary disk is the 750.
Any ideas?
How to Restore a Partition Image From a HDD to a SSD ?
View 0 Replies View RelatedAt the moment I have Win7 installed on my C drive which is a 1.5TB Samsung, it has two partitions 200GB for the OS and programs and the rest for storage.I bought a Momentus XT to replace the OS C: partition. I have tried a few programs to back-up (image) the C drive to a 3rd drive, unplug my C drive then reboot with the Win7 installation disc and run startup repair. Now at this point I get error's saying I can't run the image restore in this environment then it tells me to reboot from the disc, then basically do what I just did. So I'm stuck in a loop regarding the image restore. Secondly I tried to use Acronis disk director suite to clone the C drive to the new XT drive, this completes successfully. I Unplug my C drive, leaving just the XT in, I boot up, I get a boot error and am told to run startup repair via the installation disc which I do, after doing so it boots past the windows sign, then Acronis does some final checks as it's about to show the login screen, I get blue screened for a split second then the computer reboots. I ran startup repair again, the startup repair is stuck on "attempting repairs" for 30+ mins. So my questions are, where am I going wrong with the image restoration. I've tried saving the image backup to the new drive and to a spare drive. It refuses to restore from both these locations. The error message tells me to do what I did in the first place, and when I do it again it's the same result. With directly cloning the drive,I have obvious boot problems, I can only assume this is to do with the OS thinking it's booting from drive C, what I'm confused about is, wouldn't it be labelled as drive C if the 1.5TB drive is unplugged?
View 9 Replies View RelatedI recently got a new hard drive (Seagate Mometus XT 500GB) to replace the old one (320GB) i had for my laptop. I had created an image backup using Windows 7. I restored the image to my new hard drive using my recovery CD to the new hard drive and everything was working just fine. Windows loaded up quicker and it was faster than before. Now when i open up My Computer and go to properties of the new hard drive, the capacity comes up as 287, which is my old one. It seems Windows does not detect the new hard drive.
View 5 Replies View RelatedI have A brand new hard drive.I also have an image of win 7.I was using the usb dvd tool,but on this computer the Setup from USB freezes at Starting windows.I also have a fresh installation of WIN7 in a VM in my netbook.How would i Transfer it to my HDD?
View 9 Replies View Related