Windows 7 HP 64b System Restore Doesn't Work
Aug 9, 2012
I'm running Windows 7 Home Premium 64bit. When I try to do a System Restore, it seems to run to completion, reboots the system and then issues the following message:
"System Restore did not complete successfully. Your computer's system files and settings were not changed."
Same result in Safe mode. Same result with AV disabled. (Kaspersky Internet Security 12)
View 6 Replies
ADVERTISEMENT
Dec 7, 2012
all the icons on my screen have gone white and i cant click anything not even the start button. when i bring up the task manager all it is is a white box. i can login in fine but that is it. when i try torestore nothing happens, i dont have any restore points so i dont want to do a complete restore if i can avoid it. i have tried running chkdsk in safe mode but nothing has worked. i have also run avg rescue cd form a usb and it identified a trojan but i deleted it, still no effect. i have also tried using the recovery cd i got with my samsung laptop but can only use the startup check tool. this comes back with no issues but i cant use any of the other options.
View 2 Replies
View Related
Jan 1, 2013
I have never had the need t use this disk till now but as I am getting problems starting up I tried System Restore and it didn't work (I have tried 2 restore points).Can I use the repair disk that I created on my HP desktop to mend the system or to restore it to an earlier time ? When I open the repair disk on the computer it just shows a couple of folders (boot ,sources as well as a file called bootmgr but I can't see a hrep file to let me know what I can do...
View 1 Replies
View Related
Aug 25, 2011
My Windows 7 System Restore doesn't restore. It allows me to set them and tells me they've been done. But on the couple of occasions when I've wanted to use one, no joy. Yes I know I could possibly do it in 'Safe Mode' but that isn't an answer as to why I can't do it in regular mode?
View 2 Replies
View Related
Jun 19, 2012
I have a Dell XPS Studio MT 435 with a two HDD RAID0 system. It has three partitions:
1) C: System,
2) D: Recovery
3) Unnnamed.
It shipped with Vista Home and I upgrade to Win 7 Home. HDD1 was causing errors...the RAID0 was dying. I was getting many BSODs.I bought Acronis True Image Home 2012.I was NOT able to clone the entire disk as an image because of the BSODs.I was able to backup (sector by sector) the C: and D: partitions. I did not backup the unnamed partition.I was also able to have Win 7 backup save off the C: partition.I then replaced to the two hard drives (WD 640 GB) with two new hard drives (Seagate Momentus XT 750 GB) and reestablished the RAID0 with these new drives.First I used the Win 7 recovery CD and its backup to restore the C: partition. The restore was successful but it wouldn't boot. There was no MBR. Windows didn't ask about nor put a MBR back on the system.Next I used Acronis recovery CD and its backup to restore the C: partition.It did ask about a MBR, which I said to do. The restore was successful and when complete, it booted up to the Win 7 login.I logged in and checked things out.Everything seemed fine, my stuff was back. Until I tried Windows Update.If failed saying that the service isn't running.I checked, the server was running so its a false error report.
I found Fix It for Windows Update and it did stuff but no good. Windows Update still fails.I then got a clue that it won't run unless Windows thinks the software is genuine. So I ran the MS validation site. It reported that I was missing files and to fix that I needed to install Windows from a genuine DVD. Which I have.I ran the installer (in custom mode, it wouldn't install in express mode as the DVD was older version). The installation almost completed and I get a dialog box saying the Win 7 was not compatible with my hardware.I don't know what to try next. Of course I have compatable hardware, it was running on the old drives and running on the new drives with a broken Windows Update.I feel that I'm so close to being fully back up and I don't want to give in and start from scratch by install Windows on a wiped disk and then loading all the programs and data file one by one back onto the system.
View 1 Replies
View Related
Aug 17, 2012
I am running windows 7. when i try and restore to a different time it fails.Whats up? Yes it is turned on with lots of disc space.
View 3 Replies
View Related
Sep 24, 2012
How can I get the Windows 7 Control Panel Backup & Restore link to work? When I click on it it does nothing
View 3 Replies
View Related
Dec 15, 2012
I can't perform a factory restore on my C670 laptop. Every option I've looked up fails and goes back to a blank black screen.
View 1 Replies
View Related
Mar 8, 2012
I am having the following system configuration
XPS L401X Base
Genuine Windows(R) 7 Home Premium 64bit (English)
Intel(R) Core(TM) i7-740QM Processor
6GB 1333MHz DDR3 SDRAM (1 x 2GB + 1 x 4GB)
640GB 7200RPM Hard Drive
Lately whenever i try to start my computer it pass the Dell Bios and then directly goes to the screen which states
Repair your system or Start windows normally When i chose repair system , it start downloading windows files and then launch the windows , but hung up at the sky blue login window with only movable cusor . When i choose to start windows normally it gives me BSOD momentarly ( hard to see the message) and then restarts again . i tried with the advanced boot up options like
repair my computer , all safe modes , restore to last good configuration but it does the same and hangs at windows loging sky blue window .I Tried to run the Dell PSA+ Diagnostic and it returns with 2000-0146 error . As per the Dell online solutions for this type of error ,I tried to reinstall the Hard disk but the problem still exist.
View 3 Replies
View Related
Mar 17, 2011
HP G72; Pentium P6100 @ 2.00 GHz; 300 GB HDD; 6 GB RAM; Windows 7 Home Premium 64-bit. Three months old. Had a problem with the network connection and tried to run System Restore first thing. It said it didn't complete successfully. Tried a different restore point. Still didn't complete successfully. Isn't that a bad thing? What could have made a new computer lose its System Restore capability? Is there something I can do about it? Have since resolved the network problem so that isn't an issue anymore. However, I'd like to know System Restore is there for me in case something bad happens.
View 4 Replies
View Related
Jan 1, 2013
I have recently installed windows ultimate x64 on my computer.i have an asus p6t deluxe v2 mobo, i7-960 cpu and a wd velociraptor hdd. The install went ok, I even managed to restart my computer a few times after but after windows updates installed it won't boot. I tried to boot into safe mode, restore from the installer, and repair, none worked. After startup repair it says: "a patch is preventing the system from starting" and I get a 0x1f error code.(Preventing windows from downloading any updates didn't work either)
View 9 Replies
View Related
Jan 12, 2013
My laptop crashed the other day after a Windows update. To make a long story short it would not boot up. I tried several things to no avail. System restore disc did not work. At this point I thought the hard drive was fried. Finally I stuck the the Windows 7 companion disk and got the system to boot I can tell all my files are there somewhere due to amount of memory taking up on the hard drive. Anyways my main problem it is now asking for the product key although I have 29 days which unfortunately I cannot find. Laptop in question is a Lenovo G550. Where do I go from here? Do I have to purchase a new key? I've been using the laptop since and it seems to be working properly as far as i can tell.
View 5 Replies
View Related
Jul 28, 2011
I can't get system restore to work all the way.I keep getting error messages. The first error message said this:"System Restore did not complete successfully. Your computer's system files and settings were not changed.System Restore failed while mounting the registry from the restore point. An unspecified error occurred during System Restore. (0x800703f1)".A different error message was saying that Restore didn't work because it failed to extract this file: C:Program Files (x86)AdobeAdobe Premiere Elements 7.0x0407.ini So, I booted into safe mode and I deleted every single Adobe Premiere Elements file on my pc. Then I tried to do system restore again, this time from safe mode - but restore still didn't work. I keep getting the same error message. I have tried all the other restore points, with no success.Also, if this info helps - last week I installed a new internal 2TB Hard Drive onto my computer - it's the "K:" drive. A few days later I was getting ready to create a regular Restore Point, like I do every few weeks. But that's when I noticed that "System Restore" now shows two drives "C:" and "K:", and "K:" was greyed-out. So, I clicked the "Configure" button to configure the "K:" drive.
So, I wasn't sure that if the act of configuring the "K:" drive might have caused this whole - not being able to Restore issue. For example, by adding a new hard drive and then "Configuring" the drive, so that System Restore can work/talk with the new drive - did that somehow give System Restore a split-personality disorder? [code]
View 14 Replies
View Related
Apr 18, 2011
I have a Compaq Laptop It run on Windows Vista Home Premium 32bit. It is having this problem that the wireless internet won't connect, I have done system restore so many times and every time it still won't work, sometime it will.
View 3 Replies
View Related
Jul 24, 2012
Ever since I removed some malware I cannot run a program that is vital to my job. It tries to do a software update (which it does periodically) and encounters this error: "Message 0x1047 in SUBVMCHK Another application is in the process of updating. Please wait while this update completes." I click ok and the program shuts down. I cannot uninstall the program (I get error 1060). Is there a registry key missing? Earliest system restore does not work.
View 3 Replies
View Related
May 6, 2012
Firstly I should say that I am primarily a mac user, and it is not my laptop I am posting about. Although I am reasonably knowledgable about Windows, I haven't used it since XP, about four years ago, and so am pretty rusty.Basically, my girlfriends computer randomly turned off about a week ago, she assumed it was a dead battery, plugged it in, and then when it turned back on it wouldn't boot displaying error message: missing operating system.As it is a Dell laptop it didn't come with any installation discs, and I totally forgot to even make a repair disc when we got the laptop. I managed to get hold of a Windows 7 Installation Disc and license key for Windows 7 Ultimate 64 bit through my university. I think the laptop was previously running Windows 7 Home Premium, but that's all I know, and I'm not entirely sure of that fact.
Anyway, burnt the .iso to disc and have tried to boot several times from DVD Drive. The laptop loads the files from the DVD fine, and gets as far as the "Starting Windows" screen, where it seems to get stuck for a few minutes, until it becomes a black screen with just a cursor (the cursor still moves). This also happens with an 64 bit repair DVD I also managed to get hold of.
View 9 Replies
View Related
Aug 13, 2012
On a brand new laptop the user copied some word files over, and they opened on the new computer just fine. Then they copied some more .doc files and they could not open them, so (they claim) they choose word as the default file association (which is fine, except it should not have prompted for that in the first place). After that all the word document shortcuts they created on the desktop changed to a shortcut with IE's 'e' symbol - clicking them flashes up a screen that instantly goes away (ie I assume) and ie's download file dialog then opens. Further, an attempt to open ie acts the same way. Worse, running system restore does the same thing - flash, then ie files downloaded dialog - asking if I want to open one of the files listed (which are the .lnk files to the word documents on the desktop). So short of doing a full system restore, and also short of manually copying the registry files from the last restore point (which I'm not sure is even possible on a windows 7 drive) what can I do to resolve this mess?
View 3 Replies
View Related
Apr 10, 2012
System Restore will not create a restore point or restore to a previous date & time.The error message was: A restore point could not be created: An error was detected in the Volume Shadow Copy Server (VSS).The problem occurred while trying to contact VSS writers. Verify that the Event System Sevice and the VSS service are running & check for associated errors in the event logs (0x80042318).Volume Shadow Copy is started & running (done in system events).Event System Sevice and the VSS service are started and running. But no cigar, SR still broken.
View 9 Replies
View Related
Aug 10, 2011
Does anyone know how to schedule/automate a rollback to a system restore point at a set time each day?What i'm trying to do is:1. Disable the standard system restore behavior for creating restore points when installing apps and drivers.2. Automatically/schedule a restore point to be created every morning. (probably using Task Scheduler)3. Automatically/schedule a rollback to that morning restore point every night.This should allow users to mess up the workstation during the day, and restore a working rollback point at night when users are not using a workstation.Updates are scheduled at nighttime, so before that happens, it should rollback to a good restore point, apply updates, then create a working "new" restore point with the updates in the morning....etc.
View 4 Replies
View Related
Jan 14, 2013
I lost 2987 emails by clicking on email tab in windows task manager All the emails disappeared so now >>??? wondering if Sysytem restore restores email as well with Win 7 are do I have to do like Ive seen ? Go to your documents folder and right click on the folder titled Mail the properties and then the previous versions tab.Click on a restore point from before it was deleted and click restore.
View 3 Replies
View Related
Dec 16, 2012
my computer does not show anything eventhough of connencting the USB or pen drive..what to do ??
View 2 Replies
View Related
Feb 15, 2013
Living is south FL can be a bitch when the rains come as there often is a ton of accompanying lightening that plays havoc with the electrical system, even though I have surge protectors inside and outside the house. We just had some very heavy rains with lightening and my computer shut down several times, but I could restart it each time...except for the last time when Windows wouldn't startup. At that point, Start Up Repair came into play. Although I routinely backup on an external drive, of course I never did it this month-DUH!Results from SUR were error free (error code=0x0) on all the parameters tested, however there were the following error codes reported:"Unspecified change to the system configuration might have caused the problem." Failed: 0x1fRepair Action: System FilesFailed: x490There were more options to select for a recovery task, but I didn't try them as they didn't seem to be as salient as the two above.
View 6 Replies
View Related
Oct 19, 2012
Did a system restore in Windows 7 and my dual boot system (Windows 7&XP) won't boot. It's looking for a boot device. When I put in a Hiren boot 10.6 disk, the dual boot option is one of a number of alternatives, and it allows me to get into my pc. How can I get back to having the system work like it did before? So it boots to the dual boot option without Hiren.My SSD drive is the main drive for Windows 7 &XP. It has two partitions.
View 1 Replies
View Related
May 5, 2012
I have an newer HP Netbook running Windows 7. I recently installed Open Office 3.3 on the machine, and it works fine, except for some key sequences. For example, in the OO Writer, the key sequence Ctrl-Home should move the cursor to the top of the doc. This works fine on my older HP XP Pro laptop, but my netbook ignores or doesn't understand it. I have removed OO and reinstalled it, but the problem still occurs. So, I guess I need to figure out if this is a Windows or Open Office issue.
View 3 Replies
View Related
Jun 11, 2011
I had to buy laptop because my desktop with winxp died. Now how do I get the scanner to work with win7? I need to scan medical records. The scanner is a Canon Lide 55.
Tech Support Guy System Info Utility version 1.0.0.1win7, scanner
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 1844 Mb
Graphics Card: Intel(R) HD Graphics, 730 Mb
Hard Drives: C: Total - 260242 MB, Free - 222580 MB; D: Total - 29690 MB, Free - 28507 MB;
Motherboard: LENOVO, MoutCook, Not Applicable, WB01561071
Antivirus: avast! Antivirus, Updated and Enabled
View 7 Replies
View Related
Jul 23, 2011
I hav window 7 installed on two hard drives...My E:/ windows work properly for the internet browsers ,Mozilla,safari.... means I'm able to login to the internet account but when I use the C:/ window 7 .. all the browsers doesn't work at all.... all of them shows TRY AGAIN all the time . So, I hav to first log on from the E windows and then restart and use internet in the C windows..
View 3 Replies
View Related
Dec 2, 2012
want to downgrade to Windows XP Professional because Windows 8 and Windows 7 is nothing good for me, I like classic more
View 5 Replies
View Related
Jan 24, 2010
I connect some XP (Pro, 32 bit) Clients using a bat file to our NAS (Still using workgroups, no server)The command in the bat file is like this
net use \NAS01 /user:Admin Password
net use \10.70.1.10 /user:Admin Password
or
net use \NAS01 /user:coputernameAdmin Password
net use \10.70.1.10 /user:coputernameAdmin Password
This is working with all my XP clients pretty fine. No I want to do the same with a Windows 7(Pro, 32 bit) Client .The exact same command occurs this error message: System error 1326 has occurred.Logon failure: unknown user name or bad password.(Username and password are correct, working on all XP clients)is that when I am using a non existing user name and any password, i says: The command completed successfully.
View 5 Replies
View Related
Dec 21, 2010
I'm trying to install VMWare Workstation v7 (the trial) on my Windows 7 PC, but whenever I start the setup, I just get a blank screen :S. It's really weird. Even after 2 hours nothing happened. Can you guys help me?
[code]...
View 4 Replies
View Related
Apr 26, 2011
I have many years of experience with Windows OSes, but one thing about Win7 is stumping me. I have an application that I want to open when I log in. It's Speedfan, so I can monitor temperatures. I put a shortcut to it in my Start Menu - Programs - Startup folder. If I click on that shortcut it starts the app. But the app never starts when I log in. It shows in the start menu in MSCONFIG and it is enabled.
View 4 Replies
View Related
Nov 5, 2011
i am on windows 7 and for a week, my keyboard doesn't work. the key p, return, tab, and some others won't work. ma visual keyboard works fine - except the question mark - . i tried the pilots, and the computer says it has the best pilots so no need to update. i don't know where it comes from, but then, after a windows update, my keyboard came back to normal. it worked fine for three days and then, again, it screw up. it's always the same keys that don't work, so i don't think my keyboard is worn out. my computer is only one year old. it's a sony vaio laptop. each time i press the p key, for example, the start button -physical one- blinks. same for the other buttons. when i press the return key, the start button blinks. and while i am having this problem, my computer has trouble loading. sometimes it freezes and i have to unplug it and remove the battery to reboot.
View 13 Replies
View Related