I'm trying to install VMWare Workstation v7 (the trial) on my Windows 7 PC, but whenever I start the setup, I just get a blank screen :S. It's really weird. Even after 2 hours nothing happened. Can you guys help me?
[code]...
I have an OCZ SSD in my system. It works fine, I have tested on it other systems, and I am able to install Windows XP and Ubuntu on it. When I put in a Windows 7 disk it does not show my SSD. I have 2 different disks and both have the same problem. One is an old disk without SP1, one is a new one with SP1. I have tried different SATA wires and different SATA ports all tested and working on both other systems, and the same system under a different OS. Running in either AHCI or RAID doesn't let my system start from disk. When I click Custom and get the the screen where I partition my drive it does not show anything. It is completely blank. Despite the fact that my drive works under every other circumstance I can create.
View 4 Replies View RelatedI had Intel DG31PR motherboard and I recently changed it to a Intel DG41RG board. I intalled Windows 7 and it worked very well with DG31PR but when I try to intall it with DG41RQ the setup completes successfully(it boots itself from hard disk during installation several times without any problem) and when Windows 7 tries to boot itself for the first time it fails. After loading BIOS I get a blank screen. It happens with both x64 & x32 but other windows such as XP and Vista works fine. I tried my copy of Windows 7 with several other computers including one having Core i3,DH55TC and windows 7 installs and works in them very well. I tried 2 genuine DG41RQ motherbords but the problems persists
View 9 Replies View RelatedSo my trusty old 40 GB Maxtor HDD finally died, and I'm trying to install Windows 7 on a 250 GB Western Digital Caviar SE 16 (SATA II). Windows will boot off of the DVD, load the setup, ask me if I want to perform an install or a repair, and then it asks if I want to upgrade or do a "custom" setup. I choose custom since it's a clean drive, but then it shows me a blank list of drives with the option to load a driver. My motherboard is a Gigabyte GA-G41M-ES2H, so I went to Gigabyte's website and downloaded the drivers and put them on a USB thumb drive. I spent hours trying to load different drivers to no avail. I tried the CD that came with the motherboard; no dice. I tried 32 and 64 bit installations; neither worked.
But you know what did work? My 180-day trial copy of Windows Server 2003. It detected that hard drive like Western Digital made it just for 2003.
I have a home premium (custom built) i didn't build, i also want to format hard drive. When i put disc in, it doesn't load the windows 7 ultimate install setup, why?
Specs
500gb hdd
4gb ram
i5 quad core
I bought Windows 7 in the middle of Jan. this year and it don't work on my PC. It will install but after the install I lose all video from my Graphics Card. But XP doesn't have that problem like 7 does. I have called Microsoft multiple times about the issue and they have not figured out the problem. Is it a problem with my GTS250 or what else would the problem be. I also have had all my other hardware tested and have found no faults to it. I would like to use windows 7 but Microsoft can't figure out the problem.
View 26 Replies View RelatedI recently purchased a Dell laptop with Win 7 Home Prem. installed. I've been unable to discover if you can set it up to open files, etc. with a single as opposed to double-click of the mouse. I remember for sure that you could do this with Win XP.
View 3 Replies View Related120GB Fujitsu Hard drive is set to IDE, but I've tried AHCI as well. 2GB Crucial RAM.Motherboard is ASUS M4A785-M, processor is OEM Phenom II x4 920. Using on board graphics. The only USB device that is plugged in is my mouse. I've tried 2 different ISOs and almost all the editions and I get the same result. I've tried installing the chipset driver along with it, but when I do it just freezes after it restarts.I'm starting to think that something isn't compatible with a 64 bit OS, even though everything is listed..
View 2 Replies View Relatedmy computer does not show anything eventhough of connencting the USB or pen drive..what to do ??
View 2 Replies View RelatedI have an newer HP Netbook running Windows 7. I recently installed Open Office 3.3 on the machine, and it works fine, except for some key sequences. For example, in the OO Writer, the key sequence Ctrl-Home should move the cursor to the top of the doc. This works fine on my older HP XP Pro laptop, but my netbook ignores or doesn't understand it. I have removed OO and reinstalled it, but the problem still occurs. So, I guess I need to figure out if this is a Windows or Open Office issue.
View 3 Replies View RelatedI had to buy laptop because my desktop with winxp died. Now how do I get the scanner to work with win7? I need to scan medical records. The scanner is a Canon Lide 55.
Tech Support Guy System Info Utility version 1.0.0.1win7, scanner
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 1844 Mb
Graphics Card: Intel(R) HD Graphics, 730 Mb
Hard Drives: C: Total - 260242 MB, Free - 222580 MB; D: Total - 29690 MB, Free - 28507 MB;
Motherboard: LENOVO, MoutCook, Not Applicable, WB01561071
Antivirus: avast! Antivirus, Updated and Enabled
I hav window 7 installed on two hard drives...My E:/ windows work properly for the internet browsers ,Mozilla,safari.... means I'm able to login to the internet account but when I use the C:/ window 7 .. all the browsers doesn't work at all.... all of them shows TRY AGAIN all the time . So, I hav to first log on from the E windows and then restart and use internet in the C windows..
View 3 Replies View Relatedwant to downgrade to Windows XP Professional because Windows 8 and Windows 7 is nothing good for me, I like classic more
View 5 Replies View RelatedI connect some XP (Pro, 32 bit) Clients using a bat file to our NAS (Still using workgroups, no server)The command in the bat file is like this
net use \NAS01 /user:Admin Password
net use \10.70.1.10 /user:Admin Password
or
net use \NAS01 /user:coputernameAdmin Password
net use \10.70.1.10 /user:coputernameAdmin Password
This is working with all my XP clients pretty fine. No I want to do the same with a Windows 7(Pro, 32 bit) Client .The exact same command occurs this error message: System error 1326 has occurred.Logon failure: unknown user name or bad password.(Username and password are correct, working on all XP clients)is that when I am using a non existing user name and any password, i says: The command completed successfully.
I have many years of experience with Windows OSes, but one thing about Win7 is stumping me. I have an application that I want to open when I log in. It's Speedfan, so I can monitor temperatures. I put a shortcut to it in my Start Menu - Programs - Startup folder. If I click on that shortcut it starts the app. But the app never starts when I log in. It shows in the start menu in MSCONFIG and it is enabled.
View 4 Replies View Relatedi am on windows 7 and for a week, my keyboard doesn't work. the key p, return, tab, and some others won't work. ma visual keyboard works fine - except the question mark - . i tried the pilots, and the computer says it has the best pilots so no need to update. i don't know where it comes from, but then, after a windows update, my keyboard came back to normal. it worked fine for three days and then, again, it screw up. it's always the same keys that don't work, so i don't think my keyboard is worn out. my computer is only one year old. it's a sony vaio laptop. each time i press the p key, for example, the start button -physical one- blinks. same for the other buttons. when i press the return key, the start button blinks. and while i am having this problem, my computer has trouble loading. sometimes it freezes and i have to unplug it and remove the battery to reboot.
View 13 Replies View Relatedmy LENOVO 450 the window start up do not want to run, when i open it, there the note saying if I want to open my computer in normal way or use to window start up repair
View 4 Replies View RelatedSome weeks ago, a pop-up message appeared on my aging father's PC screen, saying that Microsoft apologized, but something must be done and required that he click on some button.Since then, his login password is inefficient. He can't use this PC anymore.
View 3 Replies View RelatedI just installed Windows 7 on my home computer. When I plug in my old speakers (Creative Intrigue 2.1s) whatever speaker is plugged into the right jack BARELY gets any sound. I did some research and it seems this is a semi common problem. I tried messing with all the balance levels and hooked up an old set of speakers which work fine. I also tried switching speakers and whichever is in the right audio jack barely works while the other works fine.The only other thing I was able to find was someone said they got a "new" cord and it fixed their problem. Is there a cord that would work with Windows Vista but wouldnt work with Windows 7?
View 10 Replies View RelatedJust got this computer about two weeks ago. My old XP Pro finally crashed and burned. I miss that machine. Win 7 is crap as far as I am concerned. Problem - Windows Explorer absolutely does not work. I try to copy and paste between drives or even on the same drive. Program starts out great and gets down to near the end and reads 5 seconds remaining. That is the end of the copy and paste. Furthermore, it is an ordeal to shut the damn program off. Sometimes I even have to pull the plug on the machine (and yes I know that is not good). I thought for a bit that some throttling program was the culprit but I am getting nowhere.
View 2 Replies View Relatedmy keyboard works fine for the BIOS but as soon as windows starts it stops.It's not recognized in the device manager but will occasionally show (still doesn't work). And I know it's not a USB problem because I've switched ports and all other USB devices work, including the mouse.
View 6 Replies View RelatedMy partitions when I enter the setup doesn't show up. Windows 7 64Bit installed first.
View 9 Replies View Relatedget my mail in my hard disk
View 29 Replies View RelatedI've got OEM version of W7 Pro 64 bit. I've had it about 2 months and everything is working fine except IE8 64 bit. I normally use Firefox so haven't been to concerned. I'm now trying to figure out why my IE8 64 bit dosn't work. The IE8 32 bit works fine. The error I get when I start IE8 64 is
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
I've downloaded IE8-WindowsVista-x64-ENU and tried installing that but get the error: "Internet Explorer 8 is not supported on this operating system". I've checked in control panel system and it reports my o/s is 64 bit.
I'm running Windows 7 Home Premium 64bit. When I try to do a System Restore, it seems to run to completion, reboots the system and then issues the following message:
"System Restore did not complete successfully. Your computer's system files and settings were not changed."
Same result in Safe mode. Same result with AV disabled. (Kaspersky Internet Security 12)
City Life doesn't work on 64 bit Windows 7 even with Vista update for Starforce
View 2 Replies View RelatedI have a seagate 2 TB external HDD. It has 1 FAT32 partition. Everything works as expected in Windows Vista/7 and even in Ubuntu.When connecting the external HDD to any XP machine (tested 3 computers with XP), the device will not show up under My Computer.It is visible in Device Manager.Under Disk Management, the drive shows up without any labelling and has improper file system and partitioning.It's as though the partition table is messed up, however, the drive works perfectly on any Vista/Windows 7/Linux pc. [code] Not only is the capacity incorrect, but darn well everything else about the drive shows up incorrect under Disk Management.This happens with all XP PCs. Also, I ran a SFC /SCANNOW with one XP machine in the event the FAT32 drivers or DLLs were corrupted and no resolve.I reinstalled XP on the same machine and the results were identical.
View 3 Replies View Relatedmy hp remote not work on windows 7. After 2 years i preinstall from vista home preimum to Windows 7 ultimate. My laptop is hp pavilion dv7-1023cl and i have all windows 7 x64 drivers, and all hp services running on automatic mode, HID also. I try many many times to set up IR to receive signal from remote, but i no have success. This is information from back side on remote:
RC1762307/01
3139 228 53391
HP SPS: 464793-001
HP: HSTNN-PRO7
I have 3 drives, C:, D:, and E:. E: is just a storage drive. XP was originally installed on the D: drive. I installed Windows 7 on the C: drive following the instructions at Dual Boot Installation with Windows 7 and XP. After installing Windows 7, I didn't get an option to boot XP so I used EasyBCD to add an XP entry to the boot menu. That worked, but after I boot into XP, if I shutdown or restart I get an error message about the Windows Boot Manager that says
"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem
...
etc
...
File: ootcd
Status: 0xc000000f
Info: an error occurred while attempting to read the boot configuration data."
Then I have to run startup repair from the Windows 7 disk. But then I just get stuck with Windows 7 and no boot menu entry for XP. If I try EasyBCD again, the same process results.
When I boot up my Windows 7 Professional x64 machine I get that balloon that states "Could not reconnect all network drives". How do I get rid of this? I am hard wired into the network (not wireless) and I cannot find a way around it.
All the solutions I have found state its either due to wireless network authentication occuring late in the boot process (but im hard wired) or that you need to upgrade to a Pro edition of windows (which I cam using).
It is not disasterous if I am being honest its just mildly irritating
i have Windows 7 ultimate 64bit and XP Pro 32bit, and here is my issue: i have a huge network and i have to set my IPs
IPv4:
IP Adress 10.100.150.200
Subnet M: 255.255.128.0
Gateway: 10.100.20.1
DNS: 10.100.0.3
This settings work on all XP OS but doesnt work with all Windows 7. It works for 5-10 min then it says no connection. After set IP it works then doesnt work. If i ping 10.100.20.1 -t it pings as much as i want until i stop and if i restart ping it doesnt work, while first ping i can access to internet after stopping the ping no internet also, That win 7s works with normal ip configurations like: ip:192.168.0.10 gateway: 192.168.0.1
Does windows 7 have problem with different gateway problem? or is it a bug?