Windows 7 Explorer Doesn't Work?
Feb 11, 2013
Just got this computer about two weeks ago. My old XP Pro finally crashed and burned. I miss that machine. Win 7 is crap as far as I am concerned. Problem - Windows Explorer absolutely does not work. I try to copy and paste between drives or even on the same drive. Program starts out great and gets down to near the end and reads 5 seconds remaining. That is the end of the copy and paste. Furthermore, it is an ordeal to shut the damn program off. Sometimes I even have to pull the plug on the machine (and yes I know that is not good). I thought for a bit that some throttling program was the culprit but I am getting nowhere.
View 2 Replies
ADVERTISEMENT
Sep 16, 2011
Basically my internet explorer doesn't work. It just hangs on loading pages and eventually gets this error:
"This program cannot display the webpage
Most likely causes: You are not connected to the Internet. The website is encountering problems. There might be a typing error in the address."
I can still access the internet through chrome and Firefox though so it's an IE issue. I also can play online games fine.
Anyway, programs like Skype that use IE to load stuff such as adding contacts doesn't work. I have tried the following things:
-Reset internet explorer
-Downgraded to IE8
I am running windows 7 32 bit and am on cable.
View 8 Replies
View Related
Apr 1, 2011
sometimes on internet explorer in windows seven my back key (above on the left of internet explorer) doesn't work. I click on it but nothing happen like I do not click on it.
View 3 Replies
View Related
Dec 20, 2012
Whenever I try and access Windows Explorer nothing happens. It lights up for a bit like it has been selected but the window never actually opens. Task Manager indicates that Windows Explorer never actually opened. I need an answer to my problem soon because it is essential that I am able to manage my computers files.
View 2 Replies
View Related
Dec 16, 2012
my computer does not show anything eventhough of connencting the USB or pen drive..what to do ??
View 2 Replies
View Related
May 5, 2012
I have an newer HP Netbook running Windows 7. I recently installed Open Office 3.3 on the machine, and it works fine, except for some key sequences. For example, in the OO Writer, the key sequence Ctrl-Home should move the cursor to the top of the doc. This works fine on my older HP XP Pro laptop, but my netbook ignores or doesn't understand it. I have removed OO and reinstalled it, but the problem still occurs. So, I guess I need to figure out if this is a Windows or Open Office issue.
View 3 Replies
View Related
Jun 11, 2011
I had to buy laptop because my desktop with winxp died. Now how do I get the scanner to work with win7? I need to scan medical records. The scanner is a Canon Lide 55.
Tech Support Guy System Info Utility version 1.0.0.1win7, scanner
OS Version: Microsoft Windows 7 Home Premium , 64 bit
Processor: Intel(R) Pentium(R) CPU P6200 @ 2.13GHz, Intel64 Family 6 Model 37 Stepping 5
Processor Count: 2
RAM: 1844 Mb
Graphics Card: Intel(R) HD Graphics, 730 Mb
Hard Drives: C: Total - 260242 MB, Free - 222580 MB; D: Total - 29690 MB, Free - 28507 MB;
Motherboard: LENOVO, MoutCook, Not Applicable, WB01561071
Antivirus: avast! Antivirus, Updated and Enabled
View 7 Replies
View Related
Jul 23, 2011
I hav window 7 installed on two hard drives...My E:/ windows work properly for the internet browsers ,Mozilla,safari.... means I'm able to login to the internet account but when I use the C:/ window 7 .. all the browsers doesn't work at all.... all of them shows TRY AGAIN all the time . So, I hav to first log on from the E windows and then restart and use internet in the C windows..
View 3 Replies
View Related
Dec 2, 2012
want to downgrade to Windows XP Professional because Windows 8 and Windows 7 is nothing good for me, I like classic more
View 5 Replies
View Related
Jan 24, 2010
I connect some XP (Pro, 32 bit) Clients using a bat file to our NAS (Still using workgroups, no server)The command in the bat file is like this
net use \NAS01 /user:Admin Password
net use \10.70.1.10 /user:Admin Password
or
net use \NAS01 /user:coputernameAdmin Password
net use \10.70.1.10 /user:coputernameAdmin Password
This is working with all my XP clients pretty fine. No I want to do the same with a Windows 7(Pro, 32 bit) Client .The exact same command occurs this error message: System error 1326 has occurred.Logon failure: unknown user name or bad password.(Username and password are correct, working on all XP clients)is that when I am using a non existing user name and any password, i says: The command completed successfully.
View 5 Replies
View Related
Dec 21, 2010
I'm trying to install VMWare Workstation v7 (the trial) on my Windows 7 PC, but whenever I start the setup, I just get a blank screen :S. It's really weird. Even after 2 hours nothing happened. Can you guys help me?
[code]...
View 4 Replies
View Related
Apr 26, 2011
I have many years of experience with Windows OSes, but one thing about Win7 is stumping me. I have an application that I want to open when I log in. It's Speedfan, so I can monitor temperatures. I put a shortcut to it in my Start Menu - Programs - Startup folder. If I click on that shortcut it starts the app. But the app never starts when I log in. It shows in the start menu in MSCONFIG and it is enabled.
View 4 Replies
View Related
Nov 5, 2011
i am on windows 7 and for a week, my keyboard doesn't work. the key p, return, tab, and some others won't work. ma visual keyboard works fine - except the question mark - . i tried the pilots, and the computer says it has the best pilots so no need to update. i don't know where it comes from, but then, after a windows update, my keyboard came back to normal. it worked fine for three days and then, again, it screw up. it's always the same keys that don't work, so i don't think my keyboard is worn out. my computer is only one year old. it's a sony vaio laptop. each time i press the p key, for example, the start button -physical one- blinks. same for the other buttons. when i press the return key, the start button blinks. and while i am having this problem, my computer has trouble loading. sometimes it freezes and i have to unplug it and remove the battery to reboot.
View 13 Replies
View Related
Feb 9, 2012
my LENOVO 450 the window start up do not want to run, when i open it, there the note saying if I want to open my computer in normal way or use to window start up repair
View 4 Replies
View Related
Aug 5, 2012
Some weeks ago, a pop-up message appeared on my aging father's PC screen, saying that Microsoft apologized, but something must be done and required that he click on some button.Since then, his login password is inefficient. He can't use this PC anymore.
View 3 Replies
View Related
Aug 15, 2012
I just installed Windows 7 on my home computer. When I plug in my old speakers (Creative Intrigue 2.1s) whatever speaker is plugged into the right jack BARELY gets any sound. I did some research and it seems this is a semi common problem. I tried messing with all the balance levels and hooked up an old set of speakers which work fine. I also tried switching speakers and whichever is in the right audio jack barely works while the other works fine.The only other thing I was able to find was someone said they got a "new" cord and it fixed their problem. Is there a cord that would work with Windows Vista but wouldnt work with Windows 7?
View 10 Replies
View Related
May 29, 2010
my keyboard works fine for the BIOS but as soon as windows starts it stops.It's not recognized in the device manager but will occasionally show (still doesn't work). And I know it's not a USB problem because I've switched ports and all other USB devices work, including the mouse.
View 6 Replies
View Related
Aug 29, 2009
get my mail in my hard disk
View 29 Replies
View Related
Nov 4, 2010
I've got OEM version of W7 Pro 64 bit. I've had it about 2 months and everything is working fine except IE8 64 bit. I normally use Firefox so haven't been to concerned. I'm now trying to figure out why my IE8 64 bit dosn't work. The IE8 32 bit works fine. The error I get when I start IE8 64 is
"The version of this file is not compatible with the version of Windows you're running. Check your computer's system information to see whether you need an x86 (32-bit) or x64 (64-bit) version of the program, and then contact the software publisher."
I've downloaded IE8-WindowsVista-x64-ENU and tried installing that but get the error: "Internet Explorer 8 is not supported on this operating system". I've checked in control panel system and it reports my o/s is 64 bit.
View 3 Replies
View Related
Aug 9, 2012
I'm running Windows 7 Home Premium 64bit. When I try to do a System Restore, it seems to run to completion, reboots the system and then issues the following message:
"System Restore did not complete successfully. Your computer's system files and settings were not changed."
Same result in Safe mode. Same result with AV disabled. (Kaspersky Internet Security 12)
View 6 Replies
View Related
Aug 17, 2010
City Life doesn't work on 64 bit Windows 7 even with Vista update for Starforce
View 2 Replies
View Related
Sep 2, 2011
I have a seagate 2 TB external HDD. It has 1 FAT32 partition. Everything works as expected in Windows Vista/7 and even in Ubuntu.When connecting the external HDD to any XP machine (tested 3 computers with XP), the device will not show up under My Computer.It is visible in Device Manager.Under Disk Management, the drive shows up without any labelling and has improper file system and partitioning.It's as though the partition table is messed up, however, the drive works perfectly on any Vista/Windows 7/Linux pc. [code] Not only is the capacity incorrect, but darn well everything else about the drive shows up incorrect under Disk Management.This happens with all XP PCs. Also, I ran a SFC /SCANNOW with one XP machine in the event the FAT32 drivers or DLLs were corrupted and no resolve.I reinstalled XP on the same machine and the results were identical.
View 3 Replies
View Related
Sep 23, 2011
my hp remote not work on windows 7. After 2 years i preinstall from vista home preimum to Windows 7 ultimate. My laptop is hp pavilion dv7-1023cl and i have all windows 7 x64 drivers, and all hp services running on automatic mode, HID also. I try many many times to set up IR to receive signal from remote, but i no have success. This is information from back side on remote:
RC1762307/01
3139 228 53391
HP SPS: 464793-001
HP: HSTNN-PRO7
View 9 Replies
View Related
Aug 11, 2010
I have 3 drives, C:, D:, and E:. E: is just a storage drive. XP was originally installed on the D: drive. I installed Windows 7 on the C: drive following the instructions at Dual Boot Installation with Windows 7 and XP. After installing Windows 7, I didn't get an option to boot XP so I used EasyBCD to add an XP entry to the boot menu. That worked, but after I boot into XP, if I shutdown or restart I get an error message about the Windows Boot Manager that says
"Windows failed to start. A recent hardware or software change might be the cause. To fix the problem
...
etc
...
File: ootcd
Status: 0xc000000f
Info: an error occurred while attempting to read the boot configuration data."
Then I have to run startup repair from the Windows 7 disk. But then I just get stuck with Windows 7 and no boot menu entry for XP. If I try EasyBCD again, the same process results.
View 4 Replies
View Related
Mar 22, 2011
When I boot up my Windows 7 Professional x64 machine I get that balloon that states "Could not reconnect all network drives". How do I get rid of this? I am hard wired into the network (not wireless) and I cannot find a way around it.
All the solutions I have found state its either due to wireless network authentication occuring late in the boot process (but im hard wired) or that you need to upgrade to a Pro edition of windows (which I cam using).
It is not disasterous if I am being honest its just mildly irritating
View 1 Replies
View Related
Mar 9, 2012
i have Windows 7 ultimate 64bit and XP Pro 32bit, and here is my issue: i have a huge network and i have to set my IPs
IPv4:
IP Adress 10.100.150.200
Subnet M: 255.255.128.0
Gateway: 10.100.20.1
DNS: 10.100.0.3
This settings work on all XP OS but doesnt work with all Windows 7. It works for 5-10 min then it says no connection. After set IP it works then doesnt work. If i ping 10.100.20.1 -t it pings as much as i want until i stop and if i restart ping it doesnt work, while first ping i can access to internet after stopping the ping no internet also, That win 7s works with normal ip configurations like: ip:192.168.0.10 gateway: 192.168.0.1
Does windows 7 have problem with different gateway problem? or is it a bug?
View 3 Replies
View Related
Aug 26, 2012
alright so my laptop used to run windows 7, but had to reinstall operative system and only had a xp cd lying around, so i installed that. Problem is now that i need drivers to get the internet and usb ports working, but have no way of getting the files on the computer I tried to burn the files onto a cd, but when i insert it and open it, the cd shows as empty. Btw the cd was burned from another laptop with windows 7 if that is of any importance?
View 6 Replies
View Related
Jan 29, 2012
Usually, when you create/rename/delete a file/folder in the directory in Windows Explorer, it will add/renamed/remove automatically without refreshing.However, I have this issue where if you do any of the above, it doesn't refresh until you press F5. I tried to see if its a driver issue by booting into Safe Mode but it didn't work in there.
View 1 Replies
View Related
Aug 1, 2012
I recently attempted to add a hard drive to my Lenovo W520 laptop using a CD/DVD caddy accessory designed to hold a SATA hard drive.Windows recognized the new device and according to its messages, automatically installed the required device drivers. However, when I go into Windows Explorer, the new drive is nowhere to be found.Now, I know (or at least assume) this new drive probably needs to be formatted, but shouldn't it show up within Windows Explorer even in a pre-formatted state?
View 4 Replies
View Related
Mar 11, 2011
The problem appeared in two different laptops (Lenovo and Fujitsu). The bluetooth hardware is not visible in device manager anymore, but unrecognized device appeared. Driver reinstall doesn't help. Driver installation setup says there is no bluetooth hardware. PC Suite is installed , worked fine before.
View 1 Replies
View Related
Oct 19, 2012
My problem began when someday i had issue in my windows which was usb was not recognized as i tried putting 3 usbs but all of them didn't work and i have 2 usb ports in my laptop which is dell xps 15z so i don't think it is a hardware issue
My problem continued and i searched and searched the internet for solutions but no one really worked so i decided to format the windows and installing new clean windows 7 one, and i did so and after installation i had too many more problems knowing that i installed all the required drivers needed for the laptop and checked them with driver genius, now any usb i plug in isn't even sensed by the lap or self installed like the usb ports have no drivers or anything.I tried the wireless mouse which isn't sensed on another laptop and it installed and worked instantly, so where is driver software installation which should install the mouse automatic?
View 2 Replies
View Related
