Windows 7 Setup Could Not Configure To Work On This Computer's Hardware?
Jun 3, 2011
120GB Fujitsu Hard drive is set to IDE, but I've tried AHCI as well. 2GB Crucial RAM.Motherboard is ASUS M4A785-M, processor is OEM Phenom II x4 920. Using on board graphics. The only USB device that is plugged in is my mouse. I've tried 2 different ISOs and almost all the editions and I get the same result. I've tried installing the chipset driver along with it, but when I do it just freezes after it restarts.I'm starting to think that something isn't compatible with a 64 bit OS, even though everything is listed..
View 2 Replies
ADVERTISEMENT
Dec 8, 2012
my pro this widows setup could not configure windows to run on this computer 's hardware
View 3 Replies
View Related
Aug 10, 2011
I'm trying to do a fresh clean install of Windows 7 x64 on a new harddrive (Seagate Barracuda ST31000524AS 1TB 7200 RPM 32MB Cache SATA 6.0Gb/s 3.5") through a USB Key
CPU: Intel i5-2500k
MSI P67A-C43 (B3)
Installing proceeds as normally, until it restarts at Configuring hardware....The resolution will change and then the error message "Windows setup could not configure windows to run on this computer's hardware" will pop up.I've changed my SATA settings in the bios to ACHI, RAID, IDE and tried installing multiple times under each option but no dice.I've tried loading Intel Rapid Storage Technology Driver from the MSI website prior to the Windows installation, but its giving me an error message about the drivers not being signed.
View 9 Replies
View Related
Aug 16, 2012
I have been doing lot of reading and looking around but cannot seem to get past this problem. I recently bought a new HP laptop, i7 processor, Navidia GT6300M video card, 8 GB RAM. HP original windows come with so much bloatware and have so many problems that i want to do a fresh clean windows 7 install on the machine. So i got a bootable windows 7 USB drive, actually i downloaded windows 7 home premium from internet and used windows 7 usb tool to make usb drive. When i go install it, first i come to partition table, HP has four partitions, one system and one recovery and two other small ones. I have tried installing after removing all partitions and make just one system drive, i have also tried keeping the paritions and install on system drive. Every time it goes through the install, reboots, does get through updates and all and on the last part gives the above statement and then i cannot get anything to work. I am able to restreo back to factory using recovery discs so windows work that way.
View 7 Replies
View Related
Oct 25, 2012
When I install windows 7 on my regular hard drive it is fine. When I try to install it on my ssd drive it says that windows setup could not configure windows to run on the computers hardware, why???
View 2 Replies
View Related
Aug 4, 2010
I've recently gone out and bought 4 HDDs to run as a raid 10, now I am using my motherboards onboard fakeraid a ihc10r. The cables are fine and when I try and install windows 7 (pro 64x) onto each individual drive with raid and ahci turned off in bios windows installs just fine. Now when I raid the drives as raid 10 windows install can see the drive and even then I load the drivers just to be sure iastor.sys etc (I've tried with and without) the same thing happens every time after the first reboot I get about 10 minutes in and about 2 mins after the screen resolution is adjusted BOOM "windows setup could not configure windows to run on this computer's hardware". I've also tried installing with 1 hdd plugged in, raid turned on in bios but no array setup and it also fails at the same point. It's pretty wierd.I did a memtest and it passed this, I also have the jmicron piece of garbage on my MB turned off. Furthermore the install proceeds when the SATA controller is in AHCI mode BUT not in raid mode.
View 9 Replies
View Related
Nov 24, 2012
I have installed windows 7 on many of these Lenovo G560's. They are standard from the factory. I had just setup this one particular laptop myself a couple months ago. Now the customer got "the problem" and upon attempting to wipe and reinstall win7 (the exact same OS/flavor, on the exact same hardware) now I receive the "error" saying windows setup cannot configure windows on this hardware.
it's like it gets most of the way thru the basic install, and the harddrive has all the basic files on it. But setup just cannot continue. I Know all about new hard drives, the 4k-thing, that has nothing to do with this, unless some virus is causing a "hardware" problem. Or maybe it is a bios issue? Bios corruption? I can't even reinstall / update bios unless windows is on it. And now I can't finish the win7 install. I have one of these lenovo's as my own laptop here/now typing this on. I don't have a problem reinstalling win7 on it.
I have tried installing from DVD, from a usb stick, from the hard drive itself (copying files to a partition on the hard drive) no go. I've tried changing BIOS settings for the hard drive from AHCI to "Compatible" (there are only these two options) and made no difference. Why (or What) the change? What causes this on standard hardware that normally would work? Is it probably broken hardware? (a bad drive controller?)
View 1 Replies
View Related
Dec 3, 2011
I was recently using my computer, when I got the message, "potentially harmful software detected." I clicked the take action option, but nothing happened. So, I turned off my tower, and turned it back on. It wouldn't get to the user sign in process. It just kept with it's blank screen. So, I've had a similar problem before, so I reset my computer to factory condition, since I don't have anything vital on it. I ran start up repair, which worked fine. I ran tests which worked fine and said it passed the entirety of the basic test. I did a more specific hard-drive test, and it passed that. So,I reset the computer to factory condition, and it goes well to that point.But then it gets to the "Setting up services" part of the resetting your computer, and it loads to installing services, but then it will say, "Windows setup cannot configure Windows to this hardware." or something to that affect. Then I'll get a message saying "Windows could not complete installation. Restart instillation." And it'll go no further, even when I reboot. What's wrong? If it helps, I use an HP 2009m.
View 5 Replies
View Related
Nov 13, 2012
I recently preformed a clean install on my Inspiron 5423. It seemed fine until I got aan error message -"Windows setup could not configure windows to run on this computer's hardware"
View 4 Replies
View Related
Jun 26, 2011
On my wife's new lap-top I installed a windows update. One of two. One failed, one installed. I clicked restart now and the computer started to shut down. The screen then showed "preparing to configure windows. Do not turn off your computer". After two hours I assumed there was something wrong so I tried to turn off but it wouldn't, even if I unplugged it,so I removed the battery. Now when I switch on and try to boot-up I see the same message and cannot get any further.
View 3 Replies
View Related
Sep 23, 2012
I am currently trying to install Windows 7 64-bit on my laptop. I current have it set up at 32-bit Windows 7 because one of the RAM sticks died a year ago. I just bought 8 GB of g.Skill ram from Newegg and received it 4 days ago[URL]... I've ran memtest for several passes and no errors show up.
Laptop: HP DM4 1063cl (approximately 2 years old) It used to be able to install Windows 7 from the same disk, but when I tried 3 days ago, it failed. I've downloaded multiple isos of SP1 from Microsoft website and still gives me the same error. I read about RAID drivers but HP told me that AHCI mode is default. I've set the BIOS to default settings and still wouldn't work. The only thing I've ever done to HDD was partition it. I've restored the HDD in comand prompt and still wouldn't run. I've switched the memory back from the old ones and also single sticks and still wouldn't work.
View 16 Replies
View Related
Mar 6, 2010
I bought Windows 7 in the middle of Jan. this year and it don't work on my PC. It will install but after the install I lose all video from my Graphics Card. But XP doesn't have that problem like 7 does. I have called Microsoft multiple times about the issue and they have not figured out the problem. Is it a problem with my GTS250 or what else would the problem be. I also have had all my other hardware tested and have found no faults to it. I would like to use windows 7 but Microsoft can't figure out the problem.
View 26 Replies
View Related
May 11, 2012
I'm trying to configure a Windows 7 computer to set the default proxy settings by machine and not by user. I've managed to find the policy in [HKEY_LOCAL_..."ProxySettingsPerUser" and when I set that to 0 it gives me the effect I want and doesn't force me to edit the settings for each user.Similar to the problem this guy: ProxySettingsPerUser had. The proxy settings are now supposedly given from the HKEY_LOCAL_MACHINE area but after hours spent googling and trying to edit the proxy settings none of my attempts seemed to change it at all. where the computer searches for proxy settings when ProxySettingsPerUser is set to 0? I read that on XP it was the same place but in HKLM not HKCU but this does not seem to work in Windows 7.
View 1 Replies
View Related
Dec 21, 2010
I'm trying to install VMWare Workstation v7 (the trial) on my Windows 7 PC, but whenever I start the setup, I just get a blank screen :S. It's really weird. Even after 2 hours nothing happened. Can you guys help me?
[code]...
View 4 Replies
View Related
Mar 24, 2011
I recently purchased a Dell laptop with Win 7 Home Prem. installed. I've been unable to discover if you can set it up to open files, etc. with a single as opposed to double-click of the mouse. I remember for sure that you could do this with Win XP.
View 3 Replies
View Related
Jan 11, 2013
I have a computer running windows 7 x64 home premium that is acting as my home media server. I don't have it configured any way special, just it has 7x3TB drives with my movies, music, pictures, and TV shows that my other computer can access. I am not using the home group function in windows.All my computers are linked through a GB switch and have access to the internet from the switch to my router and then to my modem so traffic between my home computers is through the switch and not my router.My server computer has an on board GB LAN port that is connected to the switch. I have a spare NIC card that I could put into my server, but am not sure if this would give me better network performance.
1) Would adding another network card to my server computer connected through a GB switch give me better network performance?
2) If I have a computer running a torrent client and seeding from my media server could I set it up so that one of the LAN connections was used specifically for this torrent client computer (and would that provide any more stability/performance to my system)?
View 4 Replies
View Related
Aug 17, 2012
I am not able to configure old files to the new computer. Some files a empty, other require passwords/ administrative authorization and there are files that are located in different document files under different user names.
View 1 Replies
View Related
Aug 12, 2011
I download the software for my Brother printer for installation. When I Run the installation till "Now plug in the printer with USP port and turn on the printer", nothing shows just like the printer did not plug in.
View 2 Replies
View Related
Sep 8, 2012
I recently purchased a Lenovo and figured that I should obviously get the Windows updates for it. I went to download the updates and all went well, that was until it tried to configure them with my computer. Everytime I turn on my computer now, I have to wait for it to try to configure updates. It gets to 15% completed, and then it suddenly says that the updates failed to configure, so the computer restarts, and then I have to wait for it to start up AGAIN. I've tried this at least 8-9 times and get the same result.
View 1 Replies
View Related
Mar 17, 2011
I have Windows 7 64-bit pro with Outlook 2010 installed on a Dell laptop. Is there a way to configure Outlook email to sync with my work email? Activesync works perfectly on my phone so that portion of the network is open at my work. I have been doing some reaserch and in order to get Outlook to sync with Exchange Server without VPN, RPC over HTTP or Outlook Anywhere must be enabled on the network. I know for a fact that our IT department have that portion disabled.
View 3 Replies
View Related
Jan 30, 2012
i just bought a tomee wired ps3 controller with a usb cord instead of a ps3 cord so i can use it for games on my pc. i heard that u can emulate a xbox 360 controller with a ps3 controller on pc so thats what i want to do.
View 5 Replies
View Related
Aug 26, 2011
Is there any way to setup a computer on vmware and then make an image of the vm and put it on a physical computer (multiple computers if possible)?
View 5 Replies
View Related
Jan 26, 2011
While waiting for the 7 Professional x64 installation to be finished, the screen shows " setup is preparing your computer for first use". The computer keeps reading the DVD drive about more than half hour and does not go to the normal desktop. I started from clean installation.
View 3 Replies
View Related
Apr 30, 2011
i could not continue win 7 setup on my new assebled computer..it is showing an unexpected i/o error...
View 1 Replies
View Related
Aug 10, 2012
I was trying to reinstall windows 7 and my computer froze. Now there is an error saying that the setup will resume after I restart, however when I do the same message pops up.
View 1 Replies
View Related
Oct 28, 2009
I am trying to upgrade Vista to Windows7 Home Premium and I got this message after the installer copied ~2GB of files on my PC:
"setup can't continue. restart the computer and restart setup. when prompted try getting the latest updates."
I restarted the PC and restarted the setup and I got the same message. I updated the Mother Board Bios and restarted the setup I got the same message. I have tried both options (get update and no update during the setup). And it didn't work.
I do not want to do custom install (fresh install) on my computer.
View 1 Replies
View Related
Sep 13, 2009
So i just build my computer.....well upgraded from quad core 9550 to core i7 now with my old computer, i was thinking of making that a data server, and having my main rig just os and applications and having the serve on a 2 gig connection to the network does that seem feasible. I have 4 1tb hard drives i wanted to do them in a raid 5 however the Intel controller on the x58 chipset will not let me do non boot raid setup so i can only get 2tb max in that setup.
The i know on board raid isn't the best but raid controller cards are expensive. I will basically use this server for all my data, website creation movies, and music store. i have my os on a raid 0 2x 300gb veloci raptor. Let me know what your ideas are.
View 2 Replies
View Related
Aug 19, 2012
I have recently moved to the Netherlands and now in an apartment with a common internet that 3 people, including myself are sharing from. I have been unable to hook up my own wireless router and cannot figure out how to solve this. As of now I am hard wired into the wall where the internet is working. When I plug in my wireless router I lose all internet.If I plug in a cable from Lan1 to my computer I still get nothing...I'm not the most tech friendly person but I do know how to set up my computer. Am I unable to hook it up because of the main shared modem or what?
View 1 Replies
View Related
Oct 5, 2011
one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies
View Related
May 28, 2011
How do I set up a password to log into the computer? If the computer is on, I don't want the kids to be able to blindly go to the internet. I want to make it so I have to log back in to use the computer.
View 2 Replies
View Related
Jan 16, 2012
I've maxed out my machines RAM and I'm running out of ram at times and hitting hard drive I/O bottle necks. I'm running a setup with 3 monitors on a 2.7Ghz i7 with 16GB of RAM. I'm thinking I could setup another computer, connect to it over the network and have something setup so that much of the time one of my monitors is a remote connection to that computer. Basically giving me the power of another full computer at my same workstation without having to have another physical computer / keyboard / mouse here. I'm going to test the setup with Team Viewer and see how that works to operate a second computer on my network.
View 1 Replies
View Related
