Setup A Tomee Wired Ps3/pc Controller To Work?
Jan 30, 2012
i just bought a tomee wired ps3 controller with a usb cord instead of a ps3 cord so i can use it for games on my pc. i heard that u can emulate a xbox 360 controller with a ps3 controller on pc so thats what i want to do.
View 5 Replies
ADVERTISEMENT
Oct 12, 2011
I'd like to buy a device that will (wirelessly) stream content to my bedroom. Here is what I currently have setup: In my living room, I have a dedicated media PC with Windows 7 Ultimate.On that PC I download the TV shows and movies I want to watch.Typical format is mkv and maybe some avi.
I would like to be able to watch some of these shows in my bedroom as well. The layout across the house does not allow for a hard-wired setup; it is completely out of the question. Is there a device that I can setup in my bedroom that will allow me to wirelessly stream these files?
View 6 Replies
View Related
Dec 24, 2011
I've used a wireless 360 controller with receiver now flawlessly for ~1 year. Bought a Wired one today, except whenever I plug it in, I get an immediate BSOD! I've taken the usual precautions of uninstalling MotionInJoy (both from control panel AND by deleting the appropriate driver from c:windowssystem32drivers), but it still blows up every time I've gone to the Microsoft site and downloaded the drivers there too. Basically, I install the Accessories part, and that's fine. Then when I plug the controller in, it takes about 3 seconds and then BAM. BSOD. Upon restarting, if I plug it in, it doesn't BSOD, but it sure doesn't work either. Oddly enough, the MotionInJoy driver reappears in the system32/drivers folder occasionally after a BSOD.
View 6 Replies
View Related
May 14, 2012
how i can get my wired xbox controller working on call of duty it work on other thing like minecraft just not this game?
View 6 Replies
View Related
Jan 15, 2013
Recently purchased an older wired Xbox 360 controller to play emulated retro games on my netbook. From the research I've done, windows should install the correct drivers when I plug the controller into my USB port, correct? Absolutely nothing happens when I plug the controller into the computer. I'm new to PC so I'm sure I'm making a simple mistake. I've downloaded the Xbox 32Bit controller software from microsoft and still nothing. I see nothing in device manager or anywhere else on my computer. The controller doesn't light up when I plug it in or anything
View 5 Replies
View Related
Mar 28, 2011
I got a very funny issue with my xbox 360 controller here... I bought it 3 years ago while im still in college, often used it on my laptop (win xp) and it runs well, no problem.
Last year i bought a new PC with Windows Vista, and still no problem, i played many games with that. The problem exist since i format my PC to Windows 7 ultimate 32
Here's the funny stuff, after few experiment, i found out that "The longer I dont use the controller, the longer i can use it afterward" I guess u will confuse about what im talking... but its true
For example.... I turn on my PC, and i did not plug in the controller for hours, maybe surfing webs or do some stuffs, then when i decided to plug it on to play some games, it actually works but it has a limited time. After some time, it stop working and the green light disappear. Like I turn on the pc without plugging in the controller for 30min, then when i plugged in i can use about 30min (i didnt record it, just for u to understand easily)
When i try to unplug it and plug it on again, the green light on the controller flash once, and my pc said USB Device not recognized, what the heck is this?
I've even tried to restart the PC, windows 7 loaded, i plug in the controller, about few minutes it not working again
I've been searching for solutions for few hours, updating the driver from the microsoft website, XBCD and few emulator, tried it but nothing helps
View 2 Replies
View Related
Sep 12, 2011
can i use a wired xbox360 controller on a dell xps 15 win 7 os
View 3 Replies
View Related
Aug 10, 2012
Ok, so I've researched this problem extensively, and have not come up with much. A lot of the articles online are from years ago and the few solutions that are posted don't work. So I'm resorting to posting on here in hopes someone has a more recent fix to for this.
I have an official Microsoft wired xbox 360 controller. I've tried using it on FIFA 12, Arkham City, and Saints Row 3. Every time I get to the game and use the controller it freezes the game and will not unfreeze until I unplug the controller. The thing is, windows recognizes the controller in the device manager and I can use it to browse the games' menus before starting the game. I have the "official" microsoftdrivers downloaded from here:
[URL]
I've tried uniinstalling all drivers related to the controller, all the HID compliant devices, restarting the system, disabling driver signing enforcement, reinstalling Microsoft's drivers. But every time I plug the controller in, it installs these motionjoy drivers automatically, and still freezes the game. Also I noticed my mouse becomes jerky when I move it while the controller is plugged in. This problem is ridiculous to me, because I know that the xbox 360 wireless controller works perfectly fine with games, since my roomie has a wireless USB hub for a wireless xbox controller and I've tested it with the same games. It blows my mind that a Microsoft product is not compatible with another Microsoft product, but I will reserve that rant for another time. And by the way my comp is good enough to play these games as I can play them just fine using mouse and keyboard.
View 1 Replies
View Related
Sep 18, 2012
My system is running windows 7 ultimate 64. I downloaded the latest xbox 360 controller driver from microsoft. When I plug my controller in, the 1 and 4 lights, both blink real fast and nothing else happens. It is not recognized under devices or in the computers device manager.
View 1 Replies
View Related
Sep 10, 2012
Okay, I'm trying to hook this thing up to my new Dell Inspiron 15R. The thing is, when I plug it in, it keeps failing the driver installation. Ok now here is other part. I have used this controller perfectly fine on my previous HP Mini 210. As you know, that's a pretty weak computer compared to the one I just bought.w, after about 2 hours of researching, I've downloaded the current drivers from M$, and that didn't help at all. Next I came across someone who said check the device manager. Okay, so I did a cross examination with both computers and found the netbook had something called "universal serial bus usb controller" drivers with several others branching off while my Dell did not. Also the fact that the Mini uses USB2.0 while the Dell is 3.0.So I've come to the conclusion that my Dell is lacking(and it is) these "Controller" drivers. Now the annoying part is when I use the device manager to search for updates, it says it can't find anything. I've googled around(and used the driver disk that came with my Dell) to no avail.I would greatly appreciate it if anyone could help with my problem. I'm just using the controller for gaming. It works fine in the netbook, so I don't think power to the controller is an issue. My M$ drivers are up to date so I don't think it's those either.
View 1 Replies
View Related
Nov 21, 2012
I want download Ethernet controller and net work controller drivers
View 2 Replies
View Related
Jun 19, 2012
I have been trying to set up a router at my girlfriend's apartment. I first tried a Linksys router that I had brought from home. I hooked it up from the wall port, to the router, to my computer. I was able to access the normal Linksys wireless setup page at 192.168.0.1 and set up a network fine. I then unplugged my ethernet cable and attempted to connect to the network and was not able to. If I recall, it 'connected' but there was no internet connection.
View 7 Replies
View Related
Dec 3, 2011
I formatted both my laptop and desktop computer. When i did with my laptop, everything was great. Wireless still worked. Of course i have my linksys router connected to get the wireless.
I then formatted my desktop. Its a dell. When i did this, everything seemed great. However, i noticed that if i remove my wireless router and just connect my cable modem wired, it works. However, when i connect my wireless router, then my wireless internet works but my WIRED connection does not work. It has this message that says can't connect.
I don't think this has ever happened before. I mean, there were many times where my desktop got formatted and my wired internet worked and i could not get my wireless connection to work. But never had i had my wireless work and my wired connection not work. The one thing i did this time was after i installed the drivers with my windows cd, i then deleted the old windows file that was about 25 gb.
View 1 Replies
View Related
Dec 12, 2012
I want to buy an xbox wired controller to play games on pc with the controller. My question is that the controller works as the same like on xbox? Actually, I mean the analog sticks. It has the same sensitivity on pc like on xbox? Because in the keyboard you can push the button or not. With the analog sticks you have more possibility, sensitivity.
View 10 Replies
View Related
Mar 6, 2010
I bought Windows 7 in the middle of Jan. this year and it don't work on my PC. It will install but after the install I lose all video from my Graphics Card. But XP doesn't have that problem like 7 does. I have called Microsoft multiple times about the issue and they have not figured out the problem. Is it a problem with my GTS250 or what else would the problem be. I also have had all my other hardware tested and have found no faults to it. I would like to use windows 7 but Microsoft can't figure out the problem.
View 26 Replies
View Related
Dec 21, 2010
I'm trying to install VMWare Workstation v7 (the trial) on my Windows 7 PC, but whenever I start the setup, I just get a blank screen :S. It's really weird. Even after 2 hours nothing happened. Can you guys help me?
[code]...
View 4 Replies
View Related
Jan 16, 2013
How do i get my gamepad controller to work on my computer,i have a dell computr that run on windows 7?
View 2 Replies
View Related
Mar 24, 2011
I recently purchased a Dell laptop with Win 7 Home Prem. installed. I've been unable to discover if you can set it up to open files, etc. with a single as opposed to double-click of the mouse. I remember for sure that you could do this with Win XP.
View 3 Replies
View Related
Jun 3, 2011
120GB Fujitsu Hard drive is set to IDE, but I've tried AHCI as well. 2GB Crucial RAM.Motherboard is ASUS M4A785-M, processor is OEM Phenom II x4 920. Using on board graphics. The only USB device that is plugged in is my mouse. I've tried 2 different ISOs and almost all the editions and I get the same result. I've tried installing the chipset driver along with it, but when I do it just freezes after it restarts.I'm starting to think that something isn't compatible with a 64 bit OS, even though everything is listed..
View 2 Replies
View Related
Sep 29, 2011
This is the controller I used for my Xbox before I sold it. It still works, but my Windows 7 ultimate 64-bit doesn't seem to want to be compatible with it.
Driver 2.1.0.1349
I downloaded the latest drivers and installed them, and I plug it in and it says installing device and it installs. It starts charging, but the Center button just keeps blinking, and it is showing up under device manager.
View 3 Replies
View Related
Nov 19, 2011
Installed a new M4 ssd today and loaded windows on it. Previously i was using 2 raptors in raid 0 for the os and programs. I re raided the 2 raptors and connected them to the jmicron ports and set them up for raid in bios, then created the raid 0 array no prob. Windows doesnt see the array when loaded up and i have the latest rst drivers installed..did this prior to the os install on the ssd. using the x58 e760a1 mobo. under device manager, the raid controller has an exclamation mark and no driver installed yet i have the latest rst 10.8.0.1003 installed..
View 1 Replies
View Related
Mar 29, 2012
my Microsoft sidewinder precision 2 game controller will not work om my windows 7 64bit program.
View 6 Replies
View Related
Apr 15, 2009
I'm running Windows 7 Ultimate (Build 7000) on an lenovo pc (Intel Pentium 4 - 2.8GHz, 2.00 GB RAM). my pc's actual graphics card is "Intel 82865G Graphics Controller" but windows 7 loads it as "standard VGA graphics card" which gives me a very very bad video quality but computer works great. HOWEVER,when i update video graphics back to my "Intel 82865G Graphics Controller" & play any video, the video quality is excellent & direct 3d & hardware acceleration starts working contrary to "standard VGA graphics card" but gives major computer operation problems. For e.g., As soon as i resize my VLC interface or run any other media players (like powerdvd or windows media players etc), the computer either gets stuck/hung or it shows a blue screen message saying "disable bios memory such as caching or shadowing" OR "page_fault_in_nonpaged_area" & lots of other explorer based problems.i tried changing various 3d settings in opengl as well, but in vain.
View 9 Replies
View Related
Oct 5, 2011
one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.
View 6 Replies
View Related
Jan 16, 2009
When I try to install some programs and drivers i get error: 'Setup will only run in administrator mode. setup is aborting.'. I only have one account which has administrator rights. I have already tried to enable and disable UAC, booting in safe mode, run as administrator, enabling original administrator account, adding permissions, taking ownership, changing compability mode and other but nothig is solving my problem. I'm running windows 7 x64 build 7000.
View 4 Replies
View Related
Apr 10, 2011
I found this site while browsing on my iPod. Now why would I have to use my iPod when I have a beautiful new computer sitting in front of me? Well as the title says. I have no controllers, ergo, no Internet.I bought it second hand, absolutely nothing wrong with it, I think he just might of went too far when he wiped it before giving it to me.So, I came here hoping you guys could rescue me... I'm looking for the driver(s) I need, and I'm also wondering how I can manage to download them to my com if it's not online. I have;System Manufacturer: Gigabyte Technology Co., LtdSystem Model: H55M-S2OS: Windows 7 Home Premium 64bit (6.1 build 7600)Processor: Intel Core i3 CPU 540 @ 3.07ghz (4 CPUs)BIOS: Award Modular BIOS v6.00PGg that's all good, I read it all of my DxDiag.
View 2 Replies
View Related
Jun 18, 2012
My Toshiba Satillite L655-s5153 Laptop doesn't reconize the ethernet port when I plug in my wireless router to the ehternet port. How can this be fixed? I have no internet connection.
View 1 Replies
View Related
Jun 22, 2012
I am looking for these drivers. I have a Sony Vaio desktop that I upgraded from Vista 32bit to Windows 7 64bit. The model is VGC-LT32E.
View 7 Replies
View Related
Dec 20, 2012
multimedia audio controller, PCI simple communications controller
View 1 Replies
View Related
Sep 1, 2011
I installed windows 7 ultimate on my dell xps15, but can not connect to my wireless network and cannot connect to the internet through an Ethernet cable, i looked around in my devices and noticed these had a yellow exclamation point next to them:[CODE]ecause of this i am not able to use usb drives or connect to the internet in any way on that computer, i dont know what i need to get this fixed and since i cant connect to the internet i sadly cant just update them like i would like to
View 7 Replies
View Related
Oct 28, 2011
I have a J & W H61M-D3 (B3) motherboard with an Core i3 2100,4 gig DDr3 ram.Windows 7 professional 64 bit Im despritly looking for the drivers for pci simplecommunications controller and SM bus controller
View 2 Replies
View Related