I am not able to configure old files to the new computer. Some files a empty, other require passwords/ administrative authorization and there are files that are located in different document files under different user names.
View 1 RepliesI have a computer running windows 7 x64 home premium that is acting as my home media server. I don't have it configured any way special, just it has 7x3TB drives with my movies, music, pictures, and TV shows that my other computer can access. I am not using the home group function in windows.All my computers are linked through a GB switch and have access to the internet from the switch to my router and then to my modem so traffic between my home computers is through the switch and not my router.My server computer has an on board GB LAN port that is connected to the switch. I have a spare NIC card that I could put into my server, but am not sure if this would give me better network performance.
1) Would adding another network card to my server computer connected through a GB switch give me better network performance?
2) If I have a computer running a torrent client and seeding from my media server could I set it up so that one of the LAN connections was used specifically for this torrent client computer (and would that provide any more stability/performance to my system)?
I download the software for my Brother printer for installation. When I Run the installation till "Now plug in the printer with USP port and turn on the printer", nothing shows just like the printer did not plug in.
View 2 Replies View RelatedI recently purchased a Lenovo and figured that I should obviously get the Windows updates for it. I went to download the updates and all went well, that was until it tried to configure them with my computer. Everytime I turn on my computer now, I have to wait for it to try to configure updates. It gets to 15% completed, and then it suddenly says that the updates failed to configure, so the computer restarts, and then I have to wait for it to start up AGAIN. I've tried this at least 8-9 times and get the same result.
View 1 Replies View RelatedOn my wife's new lap-top I installed a windows update. One of two. One failed, one installed. I clicked restart now and the computer started to shut down. The screen then showed "preparing to configure windows. Do not turn off your computer". After two hours I assumed there was something wrong so I tried to turn off but it wouldn't, even if I unplugged it,so I removed the battery. Now when I switch on and try to boot-up I see the same message and cannot get any further.
View 3 Replies View Related120GB Fujitsu Hard drive is set to IDE, but I've tried AHCI as well. 2GB Crucial RAM.Motherboard is ASUS M4A785-M, processor is OEM Phenom II x4 920. Using on board graphics. The only USB device that is plugged in is my mouse. I've tried 2 different ISOs and almost all the editions and I get the same result. I've tried installing the chipset driver along with it, but when I do it just freezes after it restarts.I'm starting to think that something isn't compatible with a 64 bit OS, even though everything is listed..
View 2 Replies View RelatedI'm trying to configure a Windows 7 computer to set the default proxy settings by machine and not by user. I've managed to find the policy in [HKEY_LOCAL_..."ProxySettingsPerUser" and when I set that to 0 it gives me the effect I want and doesn't force me to edit the settings for each user.Similar to the problem this guy: ProxySettingsPerUser had. The proxy settings are now supposedly given from the HKEY_LOCAL_MACHINE area but after hours spent googling and trying to edit the proxy settings none of my attempts seemed to change it at all. where the computer searches for proxy settings when ProxySettingsPerUser is set to 0? I read that on XP it was the same place but in HKLM not HKCU but this does not seem to work in Windows 7.
View 1 Replies View Relatedmy pro this widows setup could not configure windows to run on this computer 's hardware
View 3 Replies View RelatedI'm trying to do a fresh clean install of Windows 7 x64 on a new harddrive (Seagate Barracuda ST31000524AS 1TB 7200 RPM 32MB Cache SATA 6.0Gb/s 3.5") through a USB Key
CPU: Intel i5-2500k
MSI P67A-C43 (B3)
Installing proceeds as normally, until it restarts at Configuring hardware....The resolution will change and then the error message "Windows setup could not configure windows to run on this computer's hardware" will pop up.I've changed my SATA settings in the bios to ACHI, RAID, IDE and tried installing multiple times under each option but no dice.I've tried loading Intel Rapid Storage Technology Driver from the MSI website prior to the Windows installation, but its giving me an error message about the drivers not being signed.
How can i move files from my host computer to my guest computer?
In the VPC 2007 i could drag them from host to guest but that isn't working now, or i'm doing something wrong.
I've recently gone out and bought 4 HDDs to run as a raid 10, now I am using my motherboards onboard fakeraid a ihc10r. The cables are fine and when I try and install windows 7 (pro 64x) onto each individual drive with raid and ahci turned off in bios windows installs just fine. Now when I raid the drives as raid 10 windows install can see the drive and even then I load the drivers just to be sure iastor.sys etc (I've tried with and without) the same thing happens every time after the first reboot I get about 10 minutes in and about 2 mins after the screen resolution is adjusted BOOM "windows setup could not configure windows to run on this computer's hardware". I've also tried installing with 1 hdd plugged in, raid turned on in bios but no array setup and it also fails at the same point. It's pretty wierd.I did a memtest and it passed this, I also have the jmicron piece of garbage on my MB turned off. Furthermore the install proceeds when the SATA controller is in AHCI mode BUT not in raid mode.
View 9 Replies View Relatedbut i had a desktop windows 7 with some hidden files.I was getting a new laptop (macbook, to dualboot mac osx/windows 7)I got an external HDD and copied my old windows 7 files that i needed.Transfered them onto my macbook.All of my files i can access besides the ones that were "Hidden" on my old desktop.(Windows 7 desktop)I was just curious how i can have access to these files.
View 5 Replies View RelatedI bought my laptop with Vista as the original OS (August 2010). Upgraded to 7. I've had no problem whatsoever with downloading, installing and configuring updates. Until now. I have 1 important update Windows 7 Service Pack 1 (KB976932).I am getting this error: 0x800f0826. No other updates available.
View 5 Replies View RelatedI just got iTap VNC on my iPhone 4, and I'm not really sure how to get it started. I put a password on the server, and typed in my computers name on my phone and tried to connect. I have Windows 7 (64-bit), and have TCP ports 5800-6000 open on Windows Firewall. Also, I have a McAfee Security Center. When I tap on the bookmark in the app, I type in the password only (since I'm not asked for a username) and it tries to connect for about 5-10 seconds before saying "failed to establish TCP connection." What do I do now?
View 1 Replies View RelatedI wanna set optimal setting for my VGA with catalyst control center version 8.861.My VGA is Asus EAH5670 and this is my computer's configuration Operating system: Windows 7 ultimate 32bit.
View 2 Replies View RelatedThe situation is simple, just got a new HDD and installed a fresh copy of Win 7 on it - now when i try to remove the previous HDD (with the previous version of 7 on it) it won't boot. Is there any way windows can configure the MBR or am i forced to reinstall ?
View 2 Replies View Relatedhow do I configure win 7 for the RevoDrive x2?
View 1 Replies View Relatedhow do i link about 4 switchs on a network
View 1 Replies View RelatedEvery time my PC boots and Amp WinOff starts I need to click on "Activate". Is there a way to set it up and not need to do this?
View 13 Replies View Relatedi havw 2 computer buth running under window 7 i have suscesfuly changed confil,nt so that it accept files = 200 but excatly the same command is not acceptet on the second computer when starting and msdos program that requires 39 files to be oppend at the same time the answer is tha only 32 files can be opende at the same time ?
View 2 Replies View RelatedDoes Windows 7 offer a way to configure Windows Explorer to look like and function like it did in Windows XP? If so, how?
View 1 Replies View Relatedevery time i boot up before it lets me sign on, a windows configuring comes on every single time for about to weeks now, and its taking about five minutes to boot up after. i do music and my editing programs and video programs and wmplayer now freeze and skip about every 7 to 10 seconds, making my work impossible.ive tired system restore but it wont let me create a earlier date, or go past the date of the nov 18 2011.before it was showing a black screen when i would boot up and would say" corrupt file sytem ntfs, said their was a corrupt file do to a recent update fail or installed, so i have went to windows and installed every update i could, now the black screen doesnt come on , but the freeze in my programs and media continues as well the boot up. but here whats wierd cuz if i watch videos online or listen to music online there is no freeze? just on when offline?
View 9 Replies View RelatedI have the problem of failure to configure windows, i have seen a few posts on here about people solving this problem but i am a bit of a noob so was hoping i could get some 1 on 1 help.I was stuck in a loop for a while in that i would get to the failure to configure windows screen and it would either restart or would just stay on that screen for hours. i have now somehow got onto my laptop (don't ask me how! just luck i guess) but i was wondering if there was something i could do to stop it happening again. until that time i will be trying to leave my laptop turned on.
View 5 Replies View RelatedI recently downloaded and installed a set of Windows Updates that came out on 4/26. I had about 8 of them. 4 of them installed successfully but 4 of them were downloaded and installed(on shutdown) but fail to configure on startup. The four I'm having issues with are:
KB2492386
KB2515325
KB2522422
KB982018
Each of these are updates for Windows 64-bit. I was wondering if anyone else was having issues with these as well. I plan on waiting a day or two and try again. I've tried twice today with no success.For future reference, what can cause an update to fail to configure?
My computer got infected by Win 7 Security 2012 rogue virus. I removed the virus with the instruction on bleepingcomputer. I think I removed the virus, but I cannot go onto the firewall. When I go to windows firewall, everything is disabled and thus not able to enable the firewall. So when I click 'Use recommended settings' it says that Windows firewall can't change some of your settings, Errorcode 0x80070424.
View 6 Replies View RelatedIs it possible to configure IE to use a webmail application as the default email app? We use a webmail application that is not one of the standard ones like Hotmail, GMail or Yahoo Mail.
What I want is to open the webmail application whenever I click on a MailTo linke on a webpage.
In the BIOS on a laptop the disk choice can enable SATA as IDE or AHCI.
If I chose IDE do I actually lose any disk performance -- having IDE makes it easier to have Windows XP as a dual boot system without having to hunt down all the SATA drivers and slip stream an XP disk.
Remember this is a LAPTOP not a desktop so disk performance won't be that great in any case.
Anyone who knows how to configure AHCI in bios? I'm confused I must say. I want to have eSATA with a sata slot from my motherboard.
View 4 Replies View RelatedMy computer is in one room and TV is in another. I use the stereo plug to power the small satellite speakers at the computer and the HDMI cable from the mother board to drive the TV in the adjoining room. I would like to have sound in both rooms, but WMC seems to restrict one to either/or.
View 2 Replies View RelatedI am trying to get my Windows 7 machine to forward tcp connections to different address and port. I searched through the internet and found that it can be done using "net sh interface portproxy" command. Specifically I am running the following from the command line:
netsh interface portproxy add v4tov4 8000 192.168.0.100 9000.(192.168.0.100 is the address of an other computer on my network which listens on tcp port 9000)
[Code]...
I'm going out on a limb here in what I want to do. I'm not even sure it can be done.
Is there anyway for me to get a dial tone out of my laptop? I get my wifi from a Verizon UML290 LTE modem. I need it to run my credit card machine in my vehicle.