Configure AHCI In Bios?
May 31, 2010Anyone who knows how to configure AHCI in bios? I'm confused I must say. I want to have eSATA with a sata slot from my motherboard.
View 4 Replies
ADVERTISEMENT
Configure SATA As IDE Or AHCI
Jun 7, 2009In the BIOS on a laptop the disk choice can enable SATA as IDE or AHCI.
If I chose IDE do I actually lose any disk performance -- having IDE makes it easier to have Windows XP as a dual boot system without having to hunt down all the SATA drivers and slip stream an XP disk.
Remember this is a LAPTOP not a desktop so disk performance won't be that great in any case.
How To Set SSD And HDD In The Bios (AHCI, IDE)
Aug 8, 2012I have SSD as primary system drive and 2x512GB HDDs as RAID 1 for storage.In bios i have options to set them as AHCI, IDE and one more that i forgot...
View 9 Replies View RelatedAHCI Bios Setup For SSD?
Jan 10, 2012I have a SSD drive & want to use the AHCI Mode & Native Command Quening from Windows 7 Pro X64. I performed the Regedit by setting the START paramater in the registry key: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmsahci from "3" to "0" - and then making the switch in the BIOS from IDE to AHCI. Windows still would not load! The Bios screen would not load Windows 7.I have a Gigabyte GA-EP45-UD3R Board that has a Intel P45 Chipset & I installed the latest Intel Sata drivers before I tried the change. I had to use my Acronis True Image program to get Windows 7 back up & running.My Board has 6 Intel Sata ports & two Gigabyte ports on the board. I don't use the Gigabyte ports & they were left in the IDE mode in the Bios when it failed.The Bios screen loaded differently but failed as I said to load Windows 7.If I perform a clean install will Windows 7 load & install in the AHCI/Native modes with the bios setting to AHCI & not IDE? I have the SSD for programs & a 1TB HDD for storage & backup.
View 7 Replies View RelatedAHCI Bios Not Installed?
Sep 2, 2011I have a new computer. When it boots up, I see AHCI Bios not installed. I do not know much about the workings of a computer. What does AHCI Bios not installed mean? My computer runs on Windows 7 and so far it seems to work just fine.
View 1 Replies View Related[BIOS] Can't Boot From CD-ROM In AHCI Mode
Feb 9, 2011I'm trying to do a startup repair of Windows 7 x64 on an SSD but can't boot from the CD-ROM while in AHCI mode. I have set CD-ROM at the top of the boot order in BIOS but this is just ignored and the computer boots from the SSD with the knackered version of W7x64. I read somewhere that when in AHCI mode, the BIOS boot order may include "CD-ROM" but it's not the real device anymore. I tried looking for the CD-ROM by its manufacturer name in the list under Hard Drives but it's not there either.So just how do I go about booting from the CD-ROM in AHCI mode? No problems booting if I set the BIOS back to IDE mode, install Windows 7 and then do the registry hack to install the AHCI drivers, but I'd like to be able to boot from the CD-ROM in AHCI mode.
P.S. I have a Gigabyte GA-MA78GM-US2H motherboard and am using the latest BIOS version (F9D)
HD Not Recognized At All If AHCI Enabled In Bios
Jan 1, 2012I want to install Windows 7 on a clean drive.... but I cant even get to the install options, because the drive is not recognized when i turn on the machine. It stalls, even before I can get into the BIOS settings.I need to manuallly disconnect the drive > then change back to IDE mode inside the bios and now I am able to install Windows.The funny thing... I have a backup image of a running Windows 7 installation and if I copy it onto the exactly same drive it runs without problems in AHCI mode another weird thing.... i already installed Windows 7 in IDE mode and thought that maybe later, once the installation is done i could switch back to AHCI.well, same thing.... once ahci mode was enabled in the bios, the drive was not recognized anymore.i also tried to install the chipset drivers from within windows and got a "the system does not meet the minumum requirements."
View 8 Replies View RelatedSSD Hard Drive - Use SATA As IDE Or AHCI In BIOS
Sep 28, 2012I have just fitted a SSD drive in my computer windows 7 64 bit system, when I installed windows onto the new SSD I just unplugged my old hard drive and fitted the SSD and just installed windows 7 and all worked ok. But after the new install was working I was told I needed to make a change in the BIOS to alter the settings from treat Sata as IDE to treat Sata as AHCI. I did this and all was ok with the new drive the installation worked and the new drive is running ok.
But now I have since read that I should have made the bios change before installing windows nad should not be done after the install, So do I need to reinstall windows 7 with the bios changes to treat sata as AHCI before I install or will it work ok it seems to be ok but im not sure now. I was also under the impression that I could still have my old hard drive fitted and just select the hard drive I wanted to boot from as the computer started, I wanted to do this so.
I could still has access to all my old stuff if I needed it. But now my old hard drive will not boot until I change the Bios back to treat Sata as IDE, so is this not going to work or will I have to change the bios each time I need access to my old drive. Also I have an Asus P6T SE motherboard so can I plug the SSD into any Sata port or is it better to plug it into number 1 if so how do I find which one is number one.
Change Setting To AHCI In Bios And Then Install Windows 7
Mar 1, 2011Im installing a new SSD and i wanted to use it as an oppertunity to change everything over to AHCI and wanted to clarify one thing before i went ahead. Im going to change the setting to AHCI in the bios and then install windows 7 on the SSD. Once i get into windows i was going to plug in the old Hard drives. With the old hard drives being used when my computer was on IDE will they be able to be read or will all the data be lost.
View 1 Replies View RelatedSwitching BIOS SATA RAID/AHCI Setting Causes BSOD At Windows Start
Mar 30, 2012I just changed my disk setup from:
1 SATA HDD Primary OS Disk
2x SATA HDD Backup Disks in RAID 1
TO:
1 SATA SSD Primary OS Disk
1 SATA HDD Backup Disk
[No RAID]
Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo.
These are my steps:Settings > Integrated Peripherals > "SATA RAID/AHCI Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Next Step:Launch BIOS settings Integrated Peripherals > "Onboard SATA/IDE Ctrl Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues.
What am I missing? Why can't I set it to AHCI mode without BSODs?
Intel Sata Controler ICH10R AHCI + Jmicron AHCI Error
Jul 16, 2009I have the GA-EX58-Extreme Board and have just installed the pre release of Windows 7 7600 64 bit. Normally i have experience to get the BSOD when in staling with AHCI active in bios so i change to IDE mode. Installation went flawless and also the change to AHCI mode on Intel ICH10R controler went normal.
As always i got problem to change the J micron controller to AHCI and of cause i got the BSOD again. I installed the latest R1.17.48.16 driver and tryed again but no luck. Can some tell me what i am doing wrong. ? I have a hardisk and a dvd drive attached to the J micron Sata connection.
SB600 ATI RAID AHCI Drivers? (BSOD On Boot If In RAID/AHCI Mode.)
Jan 6, 2009anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
Bios Clock Time Changes After Every Restart Even After Replacing Bios
Aug 23, 2011I've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
[BIOS] Really Bad , Wont Boot After Bios Update?
Aug 25, 2012so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies View RelatedCannot Use AHCI Driver For SSD
Sep 21, 2011I recently swapped out my motherboard for a Gigabyte GA-970A-UD3. I was trying to overclock my CPU and after a crash and CMOS reset I was no longer able to complete WEI. This was fixed by reinstalling the BIOS firmware but when I ran WEI again, I was now getting a 5.9 score for my SSD (OCZ Agility) when it was previously 7.2.
Now I can no longer get Windows to use the AHCI driver (neither MS nor AMD) for the drive. I am running in AHCI mode but the driver being used for the SSD is a generic "disk drive" (disk.sys and partmgr.sys). When I try to update this driver, it tells me I am using the latest one; it also does not let me manually select the AHCI driver.
After multiple attempts at switching back and forth between IDE and AHCI in the BIOS, uninstalling and reinstalling AMD AHCI drivers, nothing changes. Still the same 5.9 WEI score and generic driver.
How To Get AHCI And IDE Mode
Apr 8, 2012i have an ASUS M5A88-M motherboard, and a Western Digital WD2503ABYX HDD. i am trying to make that drive work in AHCI mode, but when I try, the disk won't boot. i think the HDD is AHCI compatble, tho not certain. i went into the registry to set a value=o for the relevant AHCI parameter, but no luck. if i need a full re-installation of Windows 7 64-bit, does it prompt me along the way to set the mode to IDE or AHCI?.
View 2 Replies View RelatedAHCI Or IDE For Mechanical HDD ?
Jun 24, 2010Is there any real noticable benefit from having a SATA mechanical HDD use AHCI or IDE? Also, if there is any benefit, is it related to the rpm speed that the drive is capable of?I keep reading conflicting reports on this, some say AHCI is best, others say there is no real difference unless the disk is an SSD.I am about to do a clean install of Windows 7 on a laptop 5400rpm mechanical HDD so thought I may as well set the mode before proceeding with the install.
View 2 Replies View RelatedMoving From IDE To AHCI?
Nov 26, 2012I recently installed Windows 7 Home Premium on a new blank SATA hard drive which I had formatted using the default settings under Windows XP Disk Management.Prior to installing Windows 7 on this PC, I disconnected my other SATA hard drives to preclude any issues during formatting/installation.What I would like to know is whether changing the BIOS disk access mode from IDE to AHCI will impact my ability to access my old hard drives (once I reconnect them)?
View 6 Replies View RelatedChanging Between AHCI Or IDE?
Jan 14, 2013I recently purchased a HP 8440p laptop with Windows 7 Pro. installed. I dicided to partition the drive and install XP-Sp3 on the newly partitioned drive. Before I could load XP I had to change the configuration to IDE. Once I did that all went fine. Now in order to run betwwen OS's I have to set my configuration AHCI for W7 and IDE for XP.
Is there a better way of doing this beside alway re-configuring the bios for AHCI or IDE?
AHCI Serial ATA Controller?
Sep 13, 2010Driver update program says new driver available 1.0. Any issues regarding updating this driver. No problems needed. Dell Inspirion laptop Win 7 Home Prem. 64bit 4gb ram
View 7 Replies View RelatedAHCI Drivers At Install
Oct 21, 2009I have found on 4 different boards if I install in AHCI mode, Windows 7 seems to "find" the drivers for running in AHCI/RAID mode at install. If I install in IDE mode, it does not and I have no option to switch to AHCI/RAID if needed. In the past you had to press F6 (or whatever) and install them from a floppy. I think this is no longer the case with Windows 7. Can anyone confirm this. I don't even have a floppy and never will. I will install in AHCI so I have the choice in the future. Is there any down side to doing this and am I right?
Also - I know there is a registry "hack" you can use to boot into AHCI after installing in IDE but why does everyone not install in AHCI so they have the choice? Am I way off here? Are you planning to install in AHCI to have this benefit?
How To Run Windows XP On AHCI Mode
Aug 7, 2012Everytime i want to swap hard disk with different OS, WinXp(IDE) to Windows 7(AHCI), i need to do change some hard disk setting on BIOS. Is there any way that i can do to make both hard disk with different OS compatible on the desktop PC without change any setting on BIOS everytime i change hdd? Is there a way to make WinXP IDE mode to run under AHCI mode?
View 1 Replies View RelatedAHCI Computer Hangs
Oct 27, 2009me as the most of you is using Windows 7 with so much fun! I do have a little problem,don't know why actually,this is why i'm here asking for help. First of all here is my hardware configuration:
Asus P5Q PRO (latest bios,waiting if Asus is ever going to release the EFI also for my motherboard lol just like happened with P5Q Deluxe,anyway).
In bios options if I select AHCI i get faster performance and system responsiveness,but from time to time,it could happen anytime,i get complete hangs up so i have to hard reboot my pc. I tried EVERYTHING,also Intel sata ahci latest driver for my motherboard and nothing works. This happens with both 32 and 64 bit of Windows 7,and it doesn't seem to happen if it's set to IDE (which definitely makes my computer less responsive). Thanks in advance to anyone that will help me
I'm beginning to thing that it's the hardisk getting insane,it's the oldest hardware component in my pc now.
Enabled AHCI, Not All Hdd In Computer?
Mar 2, 2011So I installed win 7 on a new WD 2TB Sata3 drive, I enabled AHCI before installing. I have two hdd which I use as storage, but after the reinstall only one of them show's up in my computer. I can see the other one on device manager. Does this have something to do with the AHCI? Never enabled it before now.
Setup:
Intel i7 950
Asus Sabertooth x58
3x2GB Crusial ram
Tweaking P5N-D To Find AHCI
Feb 11, 2012Trying to tweak W7-64. Can't fing AHCI in bios.
View 4 Replies View RelatedHow To Windows AHCI Or Raid
Dec 30, 2012Im using one ssd as my boot drive for windows 7 but i dont know which way i should install it. i can either use AHCI or RAID and if i choose RAID i can specify either RST or RSTe. if i install AHCI, should i install intel's rst by loading the driver before installing windows 7 or install the rst driver after? same with RAID, should i install before or after?
View 27 Replies View RelatedHP BIOS Update Stuck At "Verifying New Bios Image 100%"
Jan 19, 2011I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
View 14 Replies View RelatedCan't Install Windows 7 To SSD Anymore In IDE Or AHCI
Mar 27, 2010Im tryin to get my 64GB Mtron SSD runnin with Windows 7 but I can't get it to show up in the installation process. It shows just fine in the BIOS, in device manager, in My Computer and in Windows Disk Management, in fact I can even use it as storage but for some reason It will not show up as a disk to install Windows. I have tried as IDE in BIOS and AHCI and in AHCI mode it will not show up in the BIOS at all or anywhere, I can only get it to show in IDE mode. It has been fully formatted and has had Windows 7 on it here recently (had to reformat due to some speed issues). Does anyone know a way I can get Windows put back on, preferably in AHCI mode cause Im stuck with a Thousand dollar drive thats good for storage only
My board is the Gigabyte GA-EP43-UD3L with BIOS F8 which according to their site is the latest one. Processor Q8600 and 4GB of OCZ Flex RAM...
Unable To Upgrade AHCI Drivers
Oct 18, 2011Tried to update my AHCI drivers with Asus but Windows 7 came back stating that their drivers were better than the ones ASUS have. Now install: Standard AHCI 1.0 Serial ATA Controller. The ASUS driver that I'm trying to install; AMD_RAIDAHCI_V3315402_V120010269_XPVistaWin7 on my F1A75-V PRO MB.
View 4 Replies View RelatedAHCI Drivers Corrupt Windows 7?
Dec 23, 2011This happened when I was booting today after turning it of last night after using it successfully since I bought it.The AHCI Drivers are corrupt.Windows won't load, it is stuck on the load screen.Trying to repair windows using the various F8 options doesn't work because they won't load either.Even the recovery partion won't load, it's stuck on the Acer E Recovery screen "please wait" and it is stuck for several hours on this.Now, in BIOS, when I change to IDE mode, it will load the various F8 options like trying to fix windows, but the problem doesn't solve itself. Also, the recovery partion does load, but it only gives me an option to install everything to factory settings, not just reinstall windows. However, Windows 7 won't actually boot on IDE mode, so I can't actually get into Windows 7.Therefore, my AHCI drivers are corrupt while the IDE ones are fine. How do I install fresh AHCI drivers to fix my corrupt ones from a USB stick? I do not have a windows install disk, it is all on the recovery partion/recovery disks
View 9 Replies View RelatedBSOD During Boot On AHCI Mode
Mar 31, 2012My motherboard is a Gigabyte Z68XP-UD3 Revision 1.3, my OS is Windows 7 Professional 64 bit, my HDD is a Seagate 1.5tb, and my SSD is an OCZ Agility 3 60gb.
So i was using Intel Smart Response technology with my SSD for SSD caching, everything was pretty much working fine. The other day i flashed my bios using @BIOS without properly disabling my smart response configuration, which i probably shouldn't have done and i won't do again. When i rebooted, Intel Rapid Storage technology was acting up and when i tried to open it, it said "IAStorUI.exe has stopped working". After that, i uninstalled the program and tried to re-install it, but during the install it said "This computer does not meet the minimum requirements for installing the software." After a little research, i found out that it meant that my bios was set in IDE mode instead of ACHI mode. I am not sure what the mode was before i flashed my bios, but it was probably some sort of raid that it used for SSD caching. When i went into the bios and switched from IDE to AHCI, windows would blue screen after performing a few seconds of the boot logo. I switched back to IDE, and did some research to find out about the "Start" registry in HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmsahci. I switched that from 3 to 0, and windows was able to boot into AHCI mode and automatically got drivers. Then, i tried re-installing Intel Rapid Storage technology. It was able to install, and i rebooted my computer. It blue screened again on the same part of the boot logo as before. I had to switch back to IDE mode to get it working again. Then, i got new chipset drivers from Intel's website, which didn't help. The registry that i changed is still set to zero, but it just won't successfully boot with AHCI like it did the first time i changed the registry. I am very stumped and i dont know what i could do to make it work like it did before i flashed my bios. My friend recommended that i should reinstall windows, but then i would have to go through the trouble of getting everything back and i think there should be some way of doing this without reinstalling the os.
The bottom line is that windows blue screens when the bios is in AHCI mode, even though i have the registry that should fix that and that did fix it on one boot set to zero.