HD Not Recognized At All If AHCI Enabled In Bios
Jan 1, 2012
I want to install Windows 7 on a clean drive.... but I cant even get to the install options, because the drive is not recognized when i turn on the machine. It stalls, even before I can get into the BIOS settings.I need to manuallly disconnect the drive > then change back to IDE mode inside the bios and now I am able to install Windows.The funny thing... I have a backup image of a running Windows 7 installation and if I copy it onto the exactly same drive it runs without problems in AHCI mode another weird thing.... i already installed Windows 7 in IDE mode and thought that maybe later, once the installation is done i could switch back to AHCI.well, same thing.... once ahci mode was enabled in the bios, the drive was not recognized anymore.i also tried to install the chipset drivers from within windows and got a "the system does not meet the minumum requirements."
View 8 Replies
ADVERTISEMENT
Mar 2, 2011
So I installed win 7 on a new WD 2TB Sata3 drive, I enabled AHCI before installing. I have two hdd which I use as storage, but after the reinstall only one of them show's up in my computer. I can see the other one on device manager. Does this have something to do with the AHCI? Never enabled it before now.
Setup:
Intel i7 950
Asus Sabertooth x58
3x2GB Crusial ram
View 3 Replies
View Related
Dec 21, 2011
Can we boot from a pendrive even after a bios password is enabled and by pressing F9 key or any other that can let us selct the boot device and even Bios password is enabled.
View 3 Replies
View Related
Aug 8, 2012
I have SSD as primary system drive and 2x512GB HDDs as RAID 1 for storage.In bios i have options to set them as AHCI, IDE and one more that i forgot...
View 9 Replies
View Related
Jan 10, 2012
I have a SSD drive & want to use the AHCI Mode & Native Command Quening from Windows 7 Pro X64. I performed the Regedit by setting the START paramater in the registry key: HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesmsahci from "3" to "0" - and then making the switch in the BIOS from IDE to AHCI. Windows still would not load! The Bios screen would not load Windows 7.I have a Gigabyte GA-EP45-UD3R Board that has a Intel P45 Chipset & I installed the latest Intel Sata drivers before I tried the change. I had to use my Acronis True Image program to get Windows 7 back up & running.My Board has 6 Intel Sata ports & two Gigabyte ports on the board. I don't use the Gigabyte ports & they were left in the IDE mode in the Bios when it failed.The Bios screen loaded differently but failed as I said to load Windows 7.If I perform a clean install will Windows 7 load & install in the AHCI/Native modes with the bios setting to AHCI & not IDE? I have the SSD for programs & a 1TB HDD for storage & backup.
View 7 Replies
View Related
May 31, 2010
Anyone who knows how to configure AHCI in bios? I'm confused I must say. I want to have eSATA with a sata slot from my motherboard.
View 4 Replies
View Related
Sep 2, 2011
I have a new computer. When it boots up, I see AHCI Bios not installed. I do not know much about the workings of a computer. What does AHCI Bios not installed mean? My computer runs on Windows 7 and so far it seems to work just fine.
View 1 Replies
View Related
Feb 9, 2011
I'm trying to do a startup repair of Windows 7 x64 on an SSD but can't boot from the CD-ROM while in AHCI mode. I have set CD-ROM at the top of the boot order in BIOS but this is just ignored and the computer boots from the SSD with the knackered version of W7x64. I read somewhere that when in AHCI mode, the BIOS boot order may include "CD-ROM" but it's not the real device anymore. I tried looking for the CD-ROM by its manufacturer name in the list under Hard Drives but it's not there either.So just how do I go about booting from the CD-ROM in AHCI mode? No problems booting if I set the BIOS back to IDE mode, install Windows 7 and then do the registry hack to install the AHCI drivers, but I'd like to be able to boot from the CD-ROM in AHCI mode.
P.S. I have a Gigabyte GA-MA78GM-US2H motherboard and am using the latest BIOS version (F9D)
View 2 Replies
View Related
Sep 28, 2012
I have just fitted a SSD drive in my computer windows 7 64 bit system, when I installed windows onto the new SSD I just unplugged my old hard drive and fitted the SSD and just installed windows 7 and all worked ok. But after the new install was working I was told I needed to make a change in the BIOS to alter the settings from treat Sata as IDE to treat Sata as AHCI. I did this and all was ok with the new drive the installation worked and the new drive is running ok.
But now I have since read that I should have made the bios change before installing windows nad should not be done after the install, So do I need to reinstall windows 7 with the bios changes to treat sata as AHCI before I install or will it work ok it seems to be ok but im not sure now. I was also under the impression that I could still have my old hard drive fitted and just select the hard drive I wanted to boot from as the computer started, I wanted to do this so.
I could still has access to all my old stuff if I needed it. But now my old hard drive will not boot until I change the Bios back to treat Sata as IDE, so is this not going to work or will I have to change the bios each time I need access to my old drive. Also I have an Asus P6T SE motherboard so can I plug the SSD into any Sata port or is it better to plug it into number 1 if so how do I find which one is number one.
View 4 Replies
View Related
Mar 1, 2011
Im installing a new SSD and i wanted to use it as an oppertunity to change everything over to AHCI and wanted to clarify one thing before i went ahead. Im going to change the setting to AHCI in the bios and then install windows 7 on the SSD. Once i get into windows i was going to plug in the old Hard drives. With the old hard drives being used when my computer was on IDE will they be able to be read or will all the data be lost.
View 1 Replies
View Related
Jun 29, 2012
These items ARE NOT enabled in my computer dncp,winds proxy,media,net bios.
View 1 Replies
View Related
Mar 30, 2012
I just changed my disk setup from:
1 SATA HDD Primary OS Disk
2x SATA HDD Backup Disks in RAID 1
TO:
1 SATA SSD Primary OS Disk
1 SATA HDD Backup Disk
[No RAID]
Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo.
These are my steps:Settings > Integrated Peripherals > "SATA RAID/AHCI Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Next Step:Launch BIOS settings Integrated Peripherals > "Onboard SATA/IDE Ctrl Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues.
What am I missing? Why can't I set it to AHCI mode without BSODs?
View 8 Replies
View Related
Jul 28, 2012
I have purchased an adapter that holds a drive or SSD and fits instead of the DVD drive. When connected windows from the main drive recognise it as second drive and all is hanky-dory the issue is that i want to install windows on the SSD but the SSD is not recognized as bootable by the BIOS and after seeing it is a common issue with no solution on many web pages i have left wondering if there is a way of booting windows from thehard drive but somehow diverting it to the SSD - maybe hard linking all system files or something...
View 6 Replies
View Related
Feb 2, 2012
I plugged it into my pc, but I cannot see it either in Windows or in the BIOS. I want to run a diagnostic of it to see what is wrong with it, but since I can't access it I can't do anything with it.
View 1 Replies
View Related
Jul 19, 2012
I installed an old 160GB Seagate Barracuda into my Win7Pro64 machine for some extra storage room. At first it worked fine. I cleaned it out and did a quick format in Windows.
Now Windows does recognize it at all. I see it in the BIOS but it won't show up in Windows.
View 2 Replies
View Related
Dec 20, 2012
it was working before the BIOS Update My Board is Intel DG31PR Updated to the [URL] and i dont remember the old BIOS version?
View 2 Replies
View Related
Jan 21, 2013
It's a hp pavilion elite m9652uk. Getting really frustrated. I'm installing from USB with Sata drivers on them but they don't help!
View 9 Replies
View Related
Feb 1, 2013
First off I am running Win 7 on a primary SSD, and have 2 1TB HDD in RAID 1 for storage. I have been running this setup fine for a while now. I recently updated my BIOS (P8P67) using the EZ Flash utility from USB per the following steps:
-Restore defaults
-Flash new BIOS
-Restore defaults
-Reset SATA mode to RAID
Everything went fine, and I verified that my BIOS was seeing the 2 HDD as 1 volume. The Intel RAID controller shows the mirrored volume and 2 drives on bootup, all fine. However, when I get into windows, the RAID volume is not listed in the Intel RST software, device manager or disk management.
View 1 Replies
View Related
Oct 8, 2012
I've built an 128gb Samsung (830 Series) SSD into my Acer RL70 Nettop. It was empty and when I tried to boot the nettop there was only the message "ERROR: No boot disk has been detected or the disk has failed". Then I connected the SSD to another computer and installed windows on it and it worked on that PC. When I put it pack into the Nettop i got the same error again. In the Bios, it shows the SSD correctly.
View 2 Replies
View Related
Jun 5, 2012
It was working before the BIOS Update My Board is Intel DG31PR Updated to the (http://downloadcenter.intel.com/Deta...=2839&lang=eng) and i dont remember the old BIOS version
View 2 Replies
View Related
May 19, 2012
A friend of mine's computer stopped working a few days ago. When turned on they only get a message to change the boot sequence or insert boot media.
I took out their HDD and attached it as a external to my computer. I then backed up all their files (the drive appears to be working fine.) not being sure what the issue was I decided to reformat the drive and re install a clean version of win 7.
After finally getting the drive completely erased I reformatted as NTFS and installed it back into the computer. At this point The bios did not recognize any HDDs or optical drives (I had the win 7 disk in the DVD drive).
I created a bootable USB win 7 disk which the computer did recognize and initiated set up. At this point the set up process does not recognize any drives.
Not sure what to do to get it to recognize the drive. My initial thoughts are formatted incorrectly.
View 1 Replies
View Related
Dec 9, 2009
hard drive registers in BIOS, but not in the windows 7 Ultimate 64 bit installation screen. Any questions I will answer RIGHT away. Oh dear God please help me. I took it in to a repair shop and I think I knew more than they did and left without any substantive help (but a $40 bill ). Do I need to format the HD? Would drivers help? All the websites say everything should be compatible - no problem - but nothing here.
WD Blue 640 GB (single HDD)
AMD Phenom ii
GA-MA785GM-US2H Gigabyte motherboard
OS: Windows 7 Ultimate 64 bit
View 4 Replies
View Related
Aug 23, 2012
I have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.When I am trying to load windows into it I get the errorWindows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menuThe Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)[CODE]
View 1 Replies
View Related
Jul 16, 2009
I have the GA-EX58-Extreme Board and have just installed the pre release of Windows 7 7600 64 bit. Normally i have experience to get the BSOD when in staling with AHCI active in bios so i change to IDE mode. Installation went flawless and also the change to AHCI mode on Intel ICH10R controler went normal.
As always i got problem to change the J micron controller to AHCI and of cause i got the BSOD again. I installed the latest R1.17.48.16 driver and tryed again but no luck. Can some tell me what i am doing wrong. ? I have a hardisk and a dvd drive attached to the J micron Sata connection.
View 3 Replies
View Related
Jan 6, 2009
anyways, my main drive is a RAID 0 with Vista x64, but I have a second HD that is a SATA 250GB, which I installed Windows 7 on. The only way I could get install to work was to switch my BIOS to IDE mode rather than RAID. I would of course though, like to be able to access my Vista drive from Windows 7 (and more importantly, not have to switch between IDE/RAID mode at all in the BIOS, it's a pain).
Now, the one odd this about this all is that the drivers I have for Vista (x86/x64 drivers) for this mobo's RAID controller WORK when loaded on installation to identify and install to the drive, but seem to not load or not work in any way once the first reboot on install occurs. Maybe this is because I installed from within Vista x64, though.
(Incedentally, my motherboard is an M3A Asus, using ATI's SB600 for a RAID controller)
I've tried loading the drivers from within Windows 7 while in IDE mode, but the install program won't let me. At first it didn't allow because of version restrictions, but then I altered the ini file to get around that, but it encounters some sort of error when installing and quits.
Any help that can be offered, would be grateful. I realise it's a beta and not a real release, so I can get past the BSOD from my odd setup, and I really am enjoying playing around with it so far. Very very impressed.
Edit: Just in case anyone thinks of suggesting me to right-click the inf file and install that way, already tried, won't allow for it.
View 0 Replies
View Related
Sep 29, 2012
I have a Zotac 570 gtx connected via HDMI cable to my Asus VE258 LED monitor.I've had this video card and monitor setup working before with the exact cable, card and monitor.Something changed in my system where the monitor is no longer recognized for what it is. When i go into my Nvidia control panel under change resolution 1.Digital Display, 2. DVI-PC Display - Resolution 1080p 59 Hz. There is no DVI cable plugged into the computer and the monitor is set on HDMI input. When i go to my Audio playback devices, the HDMI connection does not show up at all, even as disabled or disconnected.When i go to play a game (Diablo 3, Skyrim, Farcry2) The game either doesn't open (skyrim) giving me the error that resolution is not recognized (but then does not give me any resolutions to choose from in the options menu) or will play (Diablo 3) but is stuck on extremely low resolutions with only 2 options.
Here's what i've done. Contacted Zotac and had them send me the most recent drivers for the video card. Uninstalled originals and re-installed the new ones. Contacted Asus (they say its not the monitor as long as its set on HDMI input) I am unable to find a driver that will make my computer (Windows 7) recognize the monitor for what it is. Zotac failed after their attempt with the driver and told me to RMA the card. So i did... i waited a month.
View 7 Replies
View Related
Aug 23, 2011
I've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
View 3 Replies
View Related
Dec 21, 2011
When I go to the "Manage wireless networks" in the Control Panel, it says "Wireless is not currently enabled."
How do I make it currently enabled, and also for the future as well.
Yes, I manually deleted the "wireless network" icon in the list of adapters, but now I don't see any way to get it back.
No, I do not have a wireless adapter, only usb 3g modem.
View 2 Replies
View Related
Feb 15, 2012
I have discovered that FTP does not work with 802.11n enabled on my ASUS K53E with Intel Centrino Wireless N-100. I have changed channels, configured mixed mode (2.4 - 5.0 etc) change frequency from 20Mhz to auto and everything else to (all one at a time). With N enabled my laptop connects to the internet at 150Mbps and downloads and browses perfectly. When I open Smart FTP, WS-FTP or core FTP the handshake and folder population takes forever if it does it at all however if I disable N and operate on g alone (connected at 54Mbps) FTP works no problem. My router is a Netgear DGN 1000 and has the latest firmware.
View 2 Replies
View Related
Aug 25, 2012
so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies
View Related
Apr 13, 2011
I had a question concerning the remote desktop assistance on windows 7. I noticed that it was enabled today and I was wondering if windows 7 enables it by default or if someone had to enable it. My friend told me that hackers can get on to your computer through this so I was concerned but wouldn't I have to allow them access to my computer? I was wondering also if downloading things off the internet could have enabled it?
View 4 Replies
View Related