USB SATA Not Recognized After Bios Update
Jun 5, 2012It was working before the BIOS Update My Board is Intel DG31PR Updated to the (http://downloadcenter.intel.com/Deta...=2839&lang=eng) and i dont remember the old BIOS version
View 2 Replies
ADVERTISEMENT
USB SATA Is Not Recognized After BIOS Update
Dec 20, 2012it was working before the BIOS Update My Board is Intel DG31PR Updated to the [URL] and i dont remember the old BIOS version?
View 2 Replies View RelatedSATA HDD Recognized In BIOS But Not By Windows 7 Pro
Jul 19, 2012I installed an old 160GB Seagate Barracuda into my Win7Pro64 machine for some extra storage room. At first it worked fine. I cleaned it out and did a quick format in Windows.
Now Windows does recognize it at all. I see it in the BIOS but it won't show up in Windows.
RAID 1 Not Recognized In OS After BIOS Update
Feb 1, 2013First off I am running Win 7 on a primary SSD, and have 2 1TB HDD in RAID 1 for storage. I have been running this setup fine for a while now. I recently updated my BIOS (P8P67) using the EZ Flash utility from USB per the following steps:
-Restore defaults
-Flash new BIOS
-Restore defaults
-Reset SATA mode to RAID
Everything went fine, and I verified that my BIOS was seeing the 2 HDD as 1 volume. The Intel RAID controller shows the mirrored volume and 2 drives on bootup, all fine. However, when I get into windows, the RAID volume is not listed in the Intel RST software, device manager or disk management.
Samsung Bios Software Update For Bios / Update Fails
Dec 1, 2012My Samsung series 3 laptop has been sending out popup messages telling me I need a bios update, I go to the Samsung software update site and this bios update has been failing, I have made several calls and chats to techs at Samsung who tell me to do what I have already done, they tell to ask for tier 2 tech, who can go in my computer and fix it , When I finally got a tier 2 tech, they told me the same thing, I told him what I had been told about him and what he could do, He said, is it working , I said yes, but settings on computer change on their own,like wifi turns itself on and that concerns me. Anyway, He said that it didn't need a bios update,even the Samsung website said this computer needed a bios update. I posted this on hardware,firmware concerns, and they told me to post here, I was going to go to a site ,that had a download that checked drivers,
View 3 Replies View RelatedSecondary Sata Drive Not Recognized?
Jun 19, 2012Secondary Sata Drive Not Recognised
View 2 Replies View Related[BIOS] Really Bad , Wont Boot After Bios Update?
Aug 25, 2012so i did a bios update, and it wont boot after the update.its a asus m4a79xtd evo (rev 1.01g)i dont have a backup of the bios
View 3 Replies View RelatedBios Not Detecting Any Sata Drives?
Aug 7, 2012My pc had suddenly decided to not recognising any of my Sata drives. Win 7 32 bit, 4 gig ram, asus psn d motherboard,ati sapphire 1g pci card, 1 250g western digital Sata drive 1 x 1tb seagate hdd. Sata DVD drive
Yesterday my pc froze up while surfing the web, so reset it and that where the problems started
It only recognised one of the hdd then wouldn't boot got a bsod uncountable boot volume. So opened up the case to check if the cables where loose, nope, so decided to run a repair via the recovery console. Didnt detect my o/s at all ask me to install the correct drivers grrrrr. So stripped the pc down swapped the Sata cables to see if that was the problem, no joy at all would only find one Sata drive and DVD drive. Then it wouldnt recognise any of them, so swapped out the Sata DVD drive for an IDE drive. The booted up nothing bar the DVD drive. Have now come to a cross roads don't know what else's to try. Managed to boot via a USB drive with Linux and everything system wise, pcu, gpu etc works, but still no Sata drives.
Done some digging online and some ideas are not a big enough psu, faulty Sata cables, but swapped in an IDE hdd and nothing again.
SATA Driver Detected In Bios But Not In Windows 7
Mar 30, 2012When I open the PC, my hardrive and DVD rom was detected in bios but when the operating system started it shows the windows logo then after a second it shows a message that "the driver not found. Im confuse because i have only one hardrive which is the win7 installed on it. How can possibly that the PC did not find this driver but it shows the logo of win7?
View 1 Replies View RelatedSSD Hard Drive - Use SATA As IDE Or AHCI In BIOS
Sep 28, 2012I have just fitted a SSD drive in my computer windows 7 64 bit system, when I installed windows onto the new SSD I just unplugged my old hard drive and fitted the SSD and just installed windows 7 and all worked ok. But after the new install was working I was told I needed to make a change in the BIOS to alter the settings from treat Sata as IDE to treat Sata as AHCI. I did this and all was ok with the new drive the installation worked and the new drive is running ok.
But now I have since read that I should have made the bios change before installing windows nad should not be done after the install, So do I need to reinstall windows 7 with the bios changes to treat sata as AHCI before I install or will it work ok it seems to be ok but im not sure now. I was also under the impression that I could still have my old hard drive fitted and just select the hard drive I wanted to boot from as the computer started, I wanted to do this so.
I could still has access to all my old stuff if I needed it. But now my old hard drive will not boot until I change the Bios back to treat Sata as IDE, so is this not going to work or will I have to change the bios each time I need access to my old drive. Also I have an Asus P6T SE motherboard so can I plug the SSD into any Sata port or is it better to plug it into number 1 if so how do I find which one is number one.
SSD Is Not Recognized As Bootable By The BIOS
Jul 28, 2012I have purchased an adapter that holds a drive or SSD and fits instead of the DVD drive. When connected windows from the main drive recognise it as second drive and all is hanky-dory the issue is that i want to install windows on the SSD but the SSD is not recognized as bootable by the BIOS and after seeing it is a common issue with no solution on many web pages i have left wondering if there is a way of booting windows from thehard drive but somehow diverting it to the SSD - maybe hard linking all system files or something...
View 6 Replies View RelatedPSU Died, New PSU, Bios Won't Recognize SATA Devices, Now Won't Turn On
Oct 18, 2012Synopsis: PSU died, replaced PSU with different model, system boots to bios successfully but does not recognize any devices in SATA ports, nor do those devices appear to be getting power. Now can't even get to BIOS, entire PC flicks on and off repeatedly as soon as I turn the PSU on regardless of whether I hit the power button on the front of the computer.
System Specifications
Original PSU that died: SeaSonic M12II 750 SS-750AM 750w PSU
CPU: Intel Core i5-3570K Ivy Bridge 3.4GHz
GPUs: ASUS 670 non-top version, SLI (2x)
MOBO: ASRock Z77 extreme 6
RAM: Mushkin Enhanced Blackline 8GB (2 x 4GB) SDRAM DDR3 2133
Optical drive: Sony AD-7280S-0B 24x SATA Internal DVD+/-RW Drive
SSD: SanDisk Extreme 240GB SATA 6.0 Gb-s 2.5-Inch (OS is installed here)
Storage drive: Western Digital Caviar Black 1 TB SATA III (This was not connected when power supply died)
Detailed explanation:About a week ago my PSU (Seasonic 750w) died randomly while the computer was left running in sleep . I RMA'd the dead seasonic. In the mean time I happened to come accross an extremely good deal on a new PSU, so I bought it (Thermaltake smart m850w PSU) to have a backup and to get my machine working again. I hooked up the new PSU to GPUs, CPU, fans, ATX power connector, and to all of the SATA devices, (the SSD, the HDD, and the Optical drive). I made sure to connect the data cables to the SATA devices in the same configuration they were in when working properly. The computer boots successfully to the ASROCK BIOS, all fans spinning. However, I get the error code "A6" on "dr debug" (the led display on the mobo). The manual says this means "SCSI detect". I have no idea what that means.
I was able to load the UEFI, and bios recognized all components except for any of the SATA devices--(SSD, the HDD, and optical drive not recognized). The RAM, GPUs, processor, and fans were detected. At this point I was stuck in BIOS because I couldn't boot off anything.I did not have the HDD connected when the PSU failed, but now the BIOS won't read that either. I don't think any of the SATA devices are actually receiving power. Again, the UEFI showed that there were no SATA devices connected to any port, when in reality they clearly were connected both by power and data cable. Then things get really strange. I unhooked all of the SATA devices except the HDD (the one that wasn't hooked up when the original PSU died). I plug the AC into the PSU, then turn on PSU (not the power switch for the computer, the switch on the PSU). The computer starts flicking on and off in this weird rhythmic pulsating pattern "click...click...click...click..." with about a 1/2 second between each click. Each time the power flicks on, the LEDs come on and the fans spin briefly. The strangest part is that I don't need to hit the power button on the front of the case for this to happen, it just starts as soon as the PSU is turned on. In fact, I can't get the computer to turn on at all--the switch on the front of the computer appears to be dead.
1. Unplug the power cables from everything and re-seated them.
2. Reseated the data cables to the optical drive and the SSD on the drive end, not on the MOBO side as they are covered by my GPUs and I would have to take them out in order to do that.
3. Tried hooking up a SATA power cable from my old modular PSU and using that in the new PSU in an attempt to power the optical drive (didn't work, I know, bad idea--I learned you aren't supposed to do this shortly after I tried it)
4. Setting all preferences to default in the UEFI.
5. Disconnecting the power cables from one or both of the GPUs.
I think that this is either a problem with (1) the motherboard, (2) the new PSU, (3) all 3 SATA devices (unlikely). The fact that I can't even get into Bios anymore tells me that this may be a MOBO or PSU issue.My main question is how to procede from here? I suppose I can wait for my Seasonic to come back from RMA--perhaps that will clear up the issue. I just can't shake the feeling that this is a MOBO issue though. I am worried that if I keep screwing around with it I may end up frying my CPU and GPUs. I can eat the cost of a MOBO or PSU if necessary, but I can't afford to buy a new processor and two new 670s.
Bios Won't Detect My Sata 80gb SeAGTE Harddrive
Jul 17, 2011THE TITLE IS MY QUESTION...DRIVE HAD VISTA ON IT FOR YRS BOOTED WIN 7 CD AND CHOOSE TO DELETE PARTITIONS..I LET IT CREATE THE BACK UP PARTITIONS WITH 12GBG A 100mb AND THEN THE NISTALLATION PORTION..I INSTALLED..AFTER A REBOOT..DRIVE NEVER DETECTED AGAIN...WHEN ITS PLUGGED IN IOT FREEZES MY BOOT UP..CANT ACCCESS BIOS WHEN DRIVE PLUGGED IN..UNPLUG SERIAL CABLE..ALL IS WELL.
View 4 Replies View RelatedHD Not Recognized At All If AHCI Enabled In Bios
Jan 1, 2012I want to install Windows 7 on a clean drive.... but I cant even get to the install options, because the drive is not recognized when i turn on the machine. It stalls, even before I can get into the BIOS settings.I need to manuallly disconnect the drive > then change back to IDE mode inside the bios and now I am able to install Windows.The funny thing... I have a backup image of a running Windows 7 installation and if I copy it onto the exactly same drive it runs without problems in AHCI mode another weird thing.... i already installed Windows 7 in IDE mode and thought that maybe later, once the installation is done i could switch back to AHCI.well, same thing.... once ahci mode was enabled in the bios, the drive was not recognized anymore.i also tried to install the chipset drivers from within windows and got a "the system does not meet the minumum requirements."
View 8 Replies View RelatedExtra HDD Not Recognized In Windows Or BIOS?
Feb 2, 2012I plugged it into my pc, but I cannot see it either in Windows or in the BIOS. I want to run a diagnostic of it to see what is wrong with it, but since I can't access it I can't do anything with it.
View 1 Replies View RelatedNew Ssd Not Recognized In Setup Of Windows 7 But IS Seen In Bios
Jan 21, 2013It's a hp pavilion elite m9652uk. Getting really frustrated. I'm installing from USB with Sata drivers on them but they don't help!
View 9 Replies View RelatedRecognized In Bios But Doesn't Boot
Oct 8, 2012I've built an 128gb Samsung (830 Series) SSD into my Acer RL70 Nettop. It was empty and when I tried to boot the nettop there was only the message "ERROR: No boot disk has been detected or the disk has failed". Then I connected the SSD to another computer and installed windows on it and it worked on that PC. When I put it pack into the Nettop i got the same error again. In the Bios, it shows the SSD correctly.
View 2 Replies View RelatedFlashing Bios On An Adaptec 1220 SATA Drive Controller
May 26, 2009I'm going to install RC1 in the next few days.
I was looking to test the stability within RC1 of an adaptec 1220SA card I have to control the system drives. I have the Vista 64bit driver for the card as this is the newest listed.
I have created a recovery disc in beta build 7000 and hope to use this to boot into a DOS shell and follow the instructions given on the adaptec site:
This is the BIOS release v6.0-0 Build 2330 for the Adaptec SATA II RAID 1220SA Controller.
This BIOS should only be used together with Driver v1.6.12086 in Windows Server 2008 or Windows Vista.
This self-extracting archive includes the flash utility, the BIOS image file and the Release Notes.
Caution: If the BIOS update fails with an error message "unable to find file" or "target controller does not match", please see ASK Answer ID 15241
Installation Instruction: This file is self extracting and will unzip to the directory adaptec1220sa. Copy the expanded files to a floppy diskette. The expanded files can also be copied to a USB device or CD-R.
Shut down the operating system and reboot to DOS from a bootable floppy disk, USB device or CD-R. Insert the media with the update files. Run the flash utility program named AFU.EXE included in this download to backup the current BIOS and flash the new BIOS image.
I'm hoping to expand the bios update file onto a cd for the second drive or alternatively stick it on a USB stick.
My question is this, when I am in the dos shell, what do I do!
I suddenly realised that i've never had a need to use the command line
Reformatted HDD Not Recognized In Bios Or Windows 7 Install
May 19, 2012A friend of mine's computer stopped working a few days ago. When turned on they only get a message to change the boot sequence or insert boot media.
I took out their HDD and attached it as a external to my computer. I then backed up all their files (the drive appears to be working fine.) not being sure what the issue was I decided to reformat the drive and re install a clean version of win 7.
After finally getting the drive completely erased I reformatted as NTFS and installed it back into the computer. At this point The bios did not recognize any HDDs or optical drives (I had the win 7 disk in the DVD drive).
I created a bootable USB win 7 disk which the computer did recognize and initiated set up. At this point the set up process does not recognize any drives.
Not sure what to do to get it to recognize the drive. My initial thoughts are formatted incorrectly.
Hard Drive Recognized In BIOS But Not In Win7
Dec 9, 2009hard drive registers in BIOS, but not in the windows 7 Ultimate 64 bit installation screen. Any questions I will answer RIGHT away. Oh dear God please help me. I took it in to a repair shop and I think I knew more than they did and left without any substantive help (but a $40 bill ). Do I need to format the HD? Would drivers help? All the websites say everything should be compatible - no problem - but nothing here.
WD Blue 640 GB (single HDD)
AMD Phenom ii
GA-MA785GM-US2H Gigabyte motherboard
OS: Windows 7 Ultimate 64 bit
Switching BIOS SATA RAID/AHCI Setting Causes BSOD At Windows Start
Mar 30, 2012I just changed my disk setup from:
1 SATA HDD Primary OS Disk
2x SATA HDD Backup Disks in RAID 1
TO:
1 SATA SSD Primary OS Disk
1 SATA HDD Backup Disk
[No RAID]
Everything worked great, no problem. So, since I don't have a RAID array anymore, I decided that I could change my BIOS setting to AHCI instead of RAID. I have a Gigabyte GA-P35-DS3R v1.0 mobo.
These are my steps:Settings > Integrated Peripherals > "SATA RAID/AHCI Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Next Step:Launch BIOS settings Integrated Peripherals > "Onboard SATA/IDE Ctrl Mode" = RAID
--> Changed this setting to AHCI Reboot Windows Start screen shows up, but as the color orbs are spinning into focus, BSOD and immediate restart Repeated reboot several times, same outcome
Switch both settings back to RAID, reboot, and Windows starts up just fine, no issues.
What am I missing? Why can't I set it to AHCI mode without BSODs?
New Hard Disk Recognized By Windows 7 But Not By BIOS, Install Failed?
Aug 23, 2012I have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.When I am trying to load windows into it I get the errorWindows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menuThe Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)[CODE]
View 1 Replies View RelatedHP BIOS Update Stuck At "Verifying New Bios Image 100%"
Jan 19, 2011I have a five-month old HP Compaq Presario Laptop, which has been working fairly decently (I've had a few virus scares, and my Norton quarrentined something a twenty days ago). On HP's advice, I just updated the BIOS on my laptop. It's currently stuck at Verifying New Bios Image, and it's at 100% - It's been stuck that way for a half-hour plus.
View 14 Replies View RelatedHow To Update BIOS
May 11, 2012As I mentioned how can I update my BIOS version I download the latest BIOS files from the manufacturing site but cant be able to update it.I have HP Compaq dc5850 Small Form Factor PC and My Current version of BIOS is 2.1 and update is 3.3
View 9 Replies View RelatedBIOS Update Fail?
Apr 8, 2011Everytime I try to update my BIOS on my laptop I get this error: BIOS update failed!New Bios is not compatible with the current system BIOS. New BIOS part number doesn't match system BIOS part number. Error Code: -120See the for troubleshooting
View 5 Replies View RelatedBios Update Now No Desktop
Jul 16, 2011So I updated my bios today from 1.7 to 1.A. When the system restarted it goes to Windows 7 with a black screen that says "C: windows system 32configsystemprofiledesktop Refers to a location that is unavailable". From here I have all of the basic buttons but I cannot access anything. I get an error even trying to run regedit. My system ran fine before the bios update. The system setup is as follows: 50GB SSD with Windows 7 installed only..4x 500GB HDD in Raid0 with all user profiles and default save locations set to it.
2x External drives (not to important here just run Ubuntu and a spare drive)When I set the system up I changed all of the registry settings so that windows automatically saved everything to the Raid0 drive. Everything is still on the drive as it has been unchanged but Windows fails to find the desktop settings now.When I looked in the system profile folder there was no "desktop" folder there. I manually created one and got some of my shortcuts on the desktop back but everything is still missing. At system launch I edited all registry settings to point to drive D: as the primary. Maybe something changed there?
How To Update Both Bios And Windows 7
Jul 8, 2010i wanted to know i can update my win 7 and also my bios
View 7 Replies View RelatedEmulate A BIOS Update?
Oct 1, 2012I have an .ROM file I would like to "try before I buy" so to speak. Is there anyway to safely emulate a BIOS update?
View 9 Replies View RelatedBIOS Update For P5Q Motherboard?
Apr 14, 2011I'm trying to find an update for the P5Q motherboard and I'm having a hard time trying.
View 1 Replies View RelatedHow To Update The Dell Bios
Jun 17, 2011I have a 435mt mobo in a custom rig. Anyway, my problem is that I need to update the bios. I download the executable to "flash" update my bios from Dell.com but it crashes.
View 7 Replies View RelatedHow To Update Gigabyte Bios
Oct 8, 2012How to update gigabyte bios
View 2 Replies View Related