Secondary Sata Drive Not Recognized?

Jun 19, 2012

Secondary Sata Drive Not Recognised

View 2 Replies


ADVERTISEMENT

SATA Secondary Drive 0 Not Found

Jan 9, 2010

When I turn ON (cool boot) I get a message that says "SATA secondary drive 0 not found" press F1 to continue or F2 to set the BIOS. Either way I choose the drive always show up in the Device Manager and works fine, except that I always get the same message when turn ON the computer. It never does it during re-start.

View 9 Replies View Related

When Plug In Secondary SSD, Primary Isn't Recognized

Jul 16, 2012

I just got new SSD to replace a secondary regular HD that died. When i plug in the 2 sata cables that the previous HD drive was using and boot up the computer, the new ssd hows up as the main drive and the primary one is not shown in the BIOS so i cant load windows.

When i unplug the cables the computer works as normal again.

The sata power connectors are all links together (i think its some kind of 4 head power connector, its a prebuilt) if that makes any difference.

View 3 Replies View Related

SATA HDD Recognized In BIOS But Not By Windows 7 Pro

Jul 19, 2012

I installed an old 160GB Seagate Barracuda into my Win7Pro64 machine for some extra storage room. At first it worked fine. I cleaned it out and did a quick format in Windows.

Now Windows does recognize it at all. I see it in the BIOS but it won't show up in Windows.

View 2 Replies View Related

USB SATA Is Not Recognized After BIOS Update

Dec 20, 2012

it was working before the BIOS Update My Board is Intel DG31PR Updated to the [URL] and i dont remember the old BIOS version?

View 2 Replies View Related

USB SATA Not Recognized After Bios Update

Jun 5, 2012

It was working before the BIOS Update My Board is Intel DG31PR Updated to the (http://downloadcenter.intel.com/Deta...=2839&lang=eng) and i dont remember the old BIOS version

View 2 Replies View Related

Install Sata Hard Drive As A Slave Where The Master Is Also A Sata?

Aug 10, 2011

i want to make my spare sata hard drive as a slave my master hardrive is also satahow to do it . my OS is win7

View 4 Replies View Related

SATA-II Drive On SATA Raid Controller?

May 7, 2011

i purchased a Silicon SiI3512 SATA Raid Controller purely to have 2 extra SATA ports which I am using to connect to my case's external drive bays. I have flashed the bios of the controller and updated the driver to put it in "Base" mode so it is not using RAID. I did extensive research on this and it appears that I have this part right. For now, I am trying to connect a WD1600BEVT 2.5" SATA-II hard drive to one of these ports and am having some difficulty. I can see the drive, but when I try to format the drive in Windows, or a command prompt (using the windows recovery DVD) it hangs. I am wondering if this is a compatibility issue with a SATA-II drive on a SATA-I controller, however, most of the forums I have read state that if there is a compatibility issue, the controller won't even recognize the drive. I searched around to see if there was a way to force the HDD to SATA(150), but the jumpers on this drive are for SSC and RPS. Is there a way to fix this or do I need a drive that is capable of forcing SATA-I speeds? Perhaps even a controller capable of at least SATA-II since that is the minimum of all new HDDs?

View 5 Replies View Related

Have A 60GB SSD Boot Drive. Can Install Games To 1TB Secondary Drive

Jan 25, 2012

Check my Hardware specs for full information

Current setup:
C: Boot, Corsair SSD
D: Files, samsung HDD

D:/boot files/user/(all user account directories moved here, when possible) I'm wondering if it's possible to install games such as Assasins' Creed or Skrym, but install all game data to this folder?D:/boot files/programs/* Many installers allow you to define a custom installation path, But I am unsure if these games would ask for one or force me to install to the default directory?

View 9 Replies View Related

Games On Secondary Drive?

Jul 19, 2012

I just instaled a ssd and im usen that to boot from and have another drive as slave what do i need to do to play games from that drive? Also can i install games to the secondary the slave and play from that to save space on my ssd?

View 8 Replies View Related

Formatting Secondary Drive?

May 19, 2011

I just placed an old hard drive into my computer to use as a slave. After I booted up on my current hard drive I went into disk manager and tried to format all the partitions. I formated one easily but the other won't seem to format. The option to format or delete volume are both greyed out.I then tried to boot from my Windows 7 disk to format the drive that way but it said it could not format dymanic drives. I can't change the drive to basic without deleting the last simple volume.

View 3 Replies View Related

Installing Programs On Secondary Drive?

Sep 23, 2012

Instead of installing programs on the main OS Drive and installing on a secondary drive or partition, I should still be able to run the programs if I decide to format the OS drive and reinstall Windows. If so, the problem I'm seeing is that Windows won't know those programs are installed (like using the search bar to find programs or the program list) since whatever registry entries the program installer made will be wiped. Is there an easy way to back it up?Or is it advisable to just reinstall everything when I reformat?

View 1 Replies View Related

Will Reformatting Delete Information On A Secondary Drive

Jan 17, 2013

I am having issues with my computer and am planning on reformatting. I have a terabite hard drive which I moved everything to and a half terrabite hard drive which has Windows 7 and all that on it. If I reformat will it remove everything from all the hard drives or just the one I choose to install Windows 7 on?

View 2 Replies View Related

Access Denied On Secondary Drive, Nothing Works

Apr 24, 2011

i recently updated my OS from Windows XP to Windows 7. I have two HDD one for my OS install and one for my documents etc. I wiped clean for a fresh install the OS drive which removed XP and now contains Win7. The documents drive however wont open. I keep receiving the same message which is...F: is not accessible.Access is denied.I have tried numerous tutorials and browsed many forums where people have had the problem. The techniques ive tried include changing permissions from the properties, trying to change permission through cmd and all the rest. Another piece of information is that when i look at the properties of the drive it shows that its empty.

Free Space: 0bytes
Used Space: 0bytes
Capacity: 0bytes

The drive contains all the files i backed up from my previous OS and all the files that was originally on it.

View 5 Replies View Related

Missing Secondary Internal Hard Drive?

Nov 25, 2011

I've recently uninstalled itunes. When i restarted my PC i noticed that my internal secondary drive was missing. Reboot and still nothing. Powerdown wait 30 sec and swjtch back on: still missing. I finally opened it up unplugged it and replugged it and it found it again.

I then rebooted again and again it was missing repeated steps above same result.

Dont know what to do ant its a hassle to open it up every time. Windows 7 ultimate. Sata Seagate barracuda 2tb

View 9 Replies View Related

Using A Secondary Drive With 64bit When Primary Is A 32bit

Jun 20, 2012

So earlier this year I constructed my first computer, which I sunk about 2k into and made fantastic . But, having no experience, I installed a 32 bit Windows 7 OS, thereby limiting my available RAM. Since I am a gamer, this is a bit of an issue. Now I have a new SSD, and I was wondering if I could simply load a 64 bit OS onto that drive and boot from there, thereby avoiding the reformatting of my current drive.

The primary drive is a 1TB regular hard drive, the secondary is a 64Gig Samsung 830 SSD.

View 2 Replies View Related

Clean Install Onto Secondary Internal Drive

Sep 28, 2009

I have a Core 2 Duo PC with 2 SATA internal drives:

Seagate 320 gig, with C and D partitions. C contains a legit retail upgrade version of Vista Home. D is for data.

Western Digital 640 gig, with a single E partition, currently used as backup.

I ordered a Windows 7 Home Premium retail upgrade at the discounted price a few months ago and expect it in a month.

My Seagate drive is running low on space and I want to retire it. I would like to boot to the Win 7 DVD, have my Vista install on the Seagate recognized, and then do a clean install of Windows 7 on the Western Digital drive, currently E.

I hope to buy another considerably larger backup drive shortly to replace the Western Digital as a backup drive.

Will the WD drive be available as a location for the installation in these circumstances?

Any previous time I have installed MS operating systems, I always chose to install to the same drive as the existing OS. This time things are different due to little space on the Seagate drive. Windows 7 would certainly fit on my current C, but I want to retire that drive.

Or will this remain a complete unknown until some time after October 22?

Or will I be forced to install to the Seagate and then somehow migrate the install to the WD?

I have not played with the RC, so I don't know what options are normally presented during the install.

View 9 Replies View Related

Installing Upgrade To Secondary Hard Drive

Nov 5, 2009

I have a bit of a strange question about installing the Windows 7 upgrade. I'll try to keep it as simple as I can. Firstly

1: I currently have Windows XP SP3 Home Edition installed (and activated) on my 160GB WD Caviar Blue hard drive, which has 8MB cache. It's getting a bit full now.

2. This hard drive is one of the few remnants of a Dell machine I bought a few years ago.

Surprisingly, the restore disk still works and activates, even though I've changed the motherboard and a number of other things over the years. My last reinstall was about a year ago, and I had no problems reactivating whatsoever - I didn't even need to phone Microsoft.

However I doubt it'll install and activate on a new hard drive - particularly as I've also changed the DVD drive since my last activation (as the old one broke), literally the only things remaining from the old system would be the RAM and the processor.

2: I have purchased a 500GB WD Caviar Blue with 16MB Cache

3: I intend to buy Windows 7 Pro Upgrade from TheUltimateSteal for £30. I'm a student, but will be graduating soon, so it seems sensible to take advantage of this offer while I can.

4. Clearly I can install Windows 7 in the normal way onto my current drive and use the 500GB drive for backing up my files, which I'll do if that's the only option.

5. However, if I did that I would not be taking full advantage of the extra cache of the new drive. It would be nice if I could use that for my primary installation to speed things up a bit.

So here's my question:

If I start the upgrade process having booted from the 160GB drive, but during installation select my 500GB drive as the target for the installation, will Windows 7 install and activate correctly? Will it recognise the pre-existing installation, even though it was on a different drive?

If not, then:

If I install my Dell restore disk on the new drive, and don't activate Windows (which presumably I won't be able to), and then run the Windows 7 upgrade on THAT drive, will Windows 7 install and activate correctly?

Basically, is there a legitimate way of installing a Windows 7 Upgrade onto the 500GB drive, on the basis of there currently being a valid XP installation on the 160GB drive?

I have no intention of continuing to use XP after the upgrade, if I am able to install and activate Windows 7 to the new drive, then this will serve only as a backup for my files.

Has anybody tried something similar and succeeded/failed?

I've already read the tutorials on here about doing a clean install of Windows 7. I'd like to avoid dodgy workarounds, as I'd rather not run into problems further down the line when it comes to updates and that sort of thing.

View 9 Replies View Related

Can't Access Secondary Hard Drive After Restore From Backup

Feb 2, 2011

I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed. It's a pretty new drive and I've never had any problems with it before. Please can someone tell me how I can start using it again?

View 8 Replies View Related

Can't Access Secondary Hard Drive After Restore From Backup

Feb 2, 2011

I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed.

View 3 Replies View Related

Computer Won't Boot With New Seagate Barracuda Drive (Secondary)

Aug 29, 2012

Using Windows 7 Ultimate 64-bit. W/ASUS P7P55D Deluxe board. Very stable and non buggy. Computer was running great with multiple drives. I substituted one of my 1TB drives with a brand new Seagate 3 TB drive. With the new drive hooked up, the computer will not boot and gives a message that there is no hard drive detected, put media in and hit the key. (something to that effect).

If I enter the bios in the condition, it shows all the drives in their correct order and the boot sequence is the first hard drive, CD, etc. It has detected the new drive as drive #3. But it will not boot. But, if I disconnect the new drive (power and SATA connector), the compute will boot up fine. I have checked all the connectors ad they seem fine. Is there something about the sequence in which the SATA connectors have to be connected?

View 1 Replies View Related

How To Restore Performance Of A Secondary Ssd Drive Inside Windows

Oct 12, 2012

I have an SSD drive mounted as a secondary master on my motherboard that has lost performance. I did have some things on the drive that I ended up deleting because load times were painfully long. I did not format the drive using the format options in Windows as I know this further degrades performance for SSDs, but there is nothing on the drive at all right now.

My question is, is there a way to secure erase the drive while still inside Windows? All the info I've found regarding secure erasing a drive has to to with having to boot the computer with some disc (insert title), unplugging the sata cable to the drive and plugging it back in, running said program, and erasing the drive. I understand this if the drive is the Primary Master and Windows is to be installed on the drive, but this is not the case for me.

Is there a way to do this inside Windows since its a secondary drive, meaning Windows is on a completely different drive, or is there a program or something for SSDs where you can restore performance inside Windows.

View 6 Replies View Related

Reformatted Primary HDD Now Secondary Drive Appears Empty

Apr 25, 2011

I recently reformatted my Windows 7 32bit system on my primary HDD (C). When I open My Computer, my secondary HDD (D) appears, but when I try to open it, it shows as empty. However, if I look at the properties of D, it says that only 200gb out of 500gb of free space is available. I booted into a live version of Ubuntu and the secondary HDD appears with all data in it and accessible, so I know there is nothing physically wrong with the drive. I know that I could brute force this problem by making a copy of the drive in Ubuntu, then reformatting it in Win7, but I'm hoping there's an easier solution that I'm just not aware of.

View 5 Replies View Related

How To Remove-secondary Hard Drive And Still Be Able To Boot Windows 7

Jun 3, 2012

I installed windows 7 on my computer that has two hard drives and I tried to remove the secondary drive ( it was used as storage) when I removed the second drive I was then unable to restart my computer. I tried to repair start up from the install disk (3 times) it did not work. when I plug the second drive I am able to start up again. I would like to remove the storage drive and replace with a larger. I bought a wireless seagate 2tb free agent goflex hard drive and wanted to put the 2 tb hard drive into the computer and take my 1 tb drive from the computer and use it in the wireless system.

View 3 Replies View Related

New Build BSOD, Thinking Secondary Data Drive Is Issue?

Aug 2, 2012

[code]...

Ran into issues on build day 2 days ago with crashing driver issues etc. installing drivers was actinglike fliles were corrupt even off the disks.I replaced cables on drives, swapped the Bios for the SATA ports to mimic IDE, installed new version of windows with the Seagate not plugged in. Installed drivers for Mother Board rebooted to Bios swapped back from IDE on the SATA.Puts around a bit no real issues, installed the data drive rebooted and started to install software from steam and origin as well as Windows updates.BSOD a few times,Logged off ran memtest over night passed all 7 tests, ran again on each stick all passed.Windows is freezing trying to install all the updates that is the latest bsod in the log file.the 2tb drive is still uninstalled but seems stable.Not sure what is causing this, I did run CCleaner a few mins ago and it puked a ton of registery errors cleaned them up ran again found more, cleaned now it says it is clean.Here is the zip I am at wits end and do not want to RMA the Seagate if i dont have to but willing to if you all think that is my problem.

View 9 Replies View Related

Make Program Files Folder On Secondary Hard Drive Default?

Jan 5, 2013

I have a 120GB SSD for system etc. I have a 1TB HDD for everything else. How do I change the default program files folders (x86 and regular) so that when I am installing a program the first choice is on this second drive instead of C?

View 3 Replies View Related

Sata Drive Recognition Preventing Addition Of 2nd Drive

Dec 8, 2012

Have XP on C drive and looking to install Win 7 on 2nd Sata drive for dual boot. However, when installing a 2nd Sata drive my XP bios identifies it correctly as a Sata drive but my PC Disk management recognises it as a Removeable disk preventing me from installing Win 7. I have tried a couple of different Sata disks with the same result.

View 6 Replies View Related

External Sata Drive Will Not Keep Assigned Drive Letter?

Jul 16, 2011

I am running Windows 7 Pro. Have a external dual dock connected to a estata port. One of the drives assigned letter K often comes up as E and I have to change as application is looking for K. Another disk in this dock works fine. No problems. why this might be happening or anyway to prevent? Seems like when I go to disk management and assign K it should stay that way.

View 6 Replies View Related

Install Windows 7 With Sata Hard Drive And IDE DVD ROM Drive

Oct 8, 2010

I have tried numerous times on my PC to install Windows 7 onto my Sata Drive to no avail. Yet as soon as I plug in my IDE HD it installs fine.I have unplugged all external peripherals USB and internal Card Reader. Set my Bios ok as it sees both the Hard Drive and DVD fine (Both in the bios and during selection of hard drive during windows 7 installation). Yet when I come to install it, it craps out at a random percentage saying cannot read from source or worse yet it crawls so slow through the percentages (I really don't think Windows 7 should take 6 hours to get to 15%!!) Yet both the hard drive and dvd are fine and the disc works great on my other PC without the sata drive in.

My motherboard is a Biostar G31-M7 TE with latest bios now what is odd is that I recently updated the BIOS to the latest one so does my problem come from here or was it always going to be a problem on this board? Also when I do have Windows 7 installed on the IDE drive when I plug in ther sata drive inside the whole system goes belly up (from freezes when transferring large files to just not seeing the drive)

View 9 Replies View Related

Windows 7 Sata Or IDE Drive

Jan 22, 2013

I need to reinstall my Windows 7 from cracked to legal. My PC has 3 HD in it. 200 GB SATA, 200 GB Primary IDE and 160 GB Secondary IDE. It is currently loaded on the 200gb Primary IDE and the other 2 are for backup and saving data. Would I be better off installing Windows 7 on the SATA drive and using both IDE drives for backup and saving data? If so is the easiest way to just disconnect the IDE drives until Windows 7 is installed then format the original OS drive to use for backup?

View 1 Replies View Related

Backup With SATa Drive?

Mar 16, 2011

Having just bought a new PC i was left with a perfectly good SATA HDD which I intended for use in backups. The drive seemed to work ok until it cane to backing up! The drive was 320gb but when trying to back up it shows as only 47gb (not much good for a full backup).

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved