Can't Access Secondary Hard Drive After Restore From Backup
Feb 2, 2011
I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed.
View 3 Replies
ADVERTISEMENT
Feb 2, 2011
I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed. It's a pretty new drive and I've never had any problems with it before. Please can someone tell me how I can start using it again?
View 8 Replies
View Related
Jul 24, 2012
I was wondering if this would work as a poor man's backup system for Windows 7.
1) Take my daughter's laptop with Windows 7 Ultimate on it and partition the only hard disk to have a C: drive (125 Gigs) and E: drive (75 gigs).
2) Setup Windows 7 backup to backup data and disk image of the C: drive TO the E: drive.
Works OK on backup if the hard drive fails, you loose everything C: and E: but if you want a quick fix for virus attacks on the C: drive, or a quick way to restore files to the C: drive.the 64 dollar question... I haven't tested this part yet but can you RESTORE the E: drive image of the C: drive using the SYSTEM REPAIR DISK ?? Would the restoration reformat the entire hard drive, and in effect crash the restore before it starts? Or would it just reformat the C: drive partition??
View 2 Replies
View Related
Oct 12, 2012
I have an SSD drive mounted as a secondary master on my motherboard that has lost performance. I did have some things on the drive that I ended up deleting because load times were painfully long. I did not format the drive using the format options in Windows as I know this further degrades performance for SSDs, but there is nothing on the drive at all right now.
My question is, is there a way to secure erase the drive while still inside Windows? All the info I've found regarding secure erasing a drive has to to with having to boot the computer with some disc (insert title), unplugging the sata cable to the drive and plugging it back in, running said program, and erasing the drive. I understand this if the drive is the Primary Master and Windows is to be installed on the drive, but this is not the case for me.
Is there a way to do this inside Windows since its a secondary drive, meaning Windows is on a completely different drive, or is there a program or something for SSDs where you can restore performance inside Windows.
View 6 Replies
View Related
Apr 24, 2011
i recently updated my OS from Windows XP to Windows 7. I have two HDD one for my OS install and one for my documents etc. I wiped clean for a fresh install the OS drive which removed XP and now contains Win7. The documents drive however wont open. I keep receiving the same message which is...F: is not accessible.Access is denied.I have tried numerous tutorials and browsed many forums where people have had the problem. The techniques ive tried include changing permissions from the properties, trying to change permission through cmd and all the rest. Another piece of information is that when i look at the properties of the drive it shows that its empty.
Free Space: 0bytes
Used Space: 0bytes
Capacity: 0bytes
The drive contains all the files i backed up from my previous OS and all the files that was originally on it.
View 5 Replies
View Related
Nov 25, 2011
I've recently uninstalled itunes. When i restarted my PC i noticed that my internal secondary drive was missing. Reboot and still nothing. Powerdown wait 30 sec and swjtch back on: still missing. I finally opened it up unplugged it and replugged it and it found it again.
I then rebooted again and again it was missing repeated steps above same result.
Dont know what to do ant its a hassle to open it up every time. Windows 7 ultimate. Sata Seagate barracuda 2tb
View 9 Replies
View Related
Nov 5, 2009
I have a bit of a strange question about installing the Windows 7 upgrade. I'll try to keep it as simple as I can. Firstly
1: I currently have Windows XP SP3 Home Edition installed (and activated) on my 160GB WD Caviar Blue hard drive, which has 8MB cache. It's getting a bit full now.
2. This hard drive is one of the few remnants of a Dell machine I bought a few years ago.
Surprisingly, the restore disk still works and activates, even though I've changed the motherboard and a number of other things over the years. My last reinstall was about a year ago, and I had no problems reactivating whatsoever - I didn't even need to phone Microsoft.
However I doubt it'll install and activate on a new hard drive - particularly as I've also changed the DVD drive since my last activation (as the old one broke), literally the only things remaining from the old system would be the RAM and the processor.
2: I have purchased a 500GB WD Caviar Blue with 16MB Cache
3: I intend to buy Windows 7 Pro Upgrade from TheUltimateSteal for £30. I'm a student, but will be graduating soon, so it seems sensible to take advantage of this offer while I can.
4. Clearly I can install Windows 7 in the normal way onto my current drive and use the 500GB drive for backing up my files, which I'll do if that's the only option.
5. However, if I did that I would not be taking full advantage of the extra cache of the new drive. It would be nice if I could use that for my primary installation to speed things up a bit.
So here's my question:
If I start the upgrade process having booted from the 160GB drive, but during installation select my 500GB drive as the target for the installation, will Windows 7 install and activate correctly? Will it recognise the pre-existing installation, even though it was on a different drive?
If not, then:
If I install my Dell restore disk on the new drive, and don't activate Windows (which presumably I won't be able to), and then run the Windows 7 upgrade on THAT drive, will Windows 7 install and activate correctly?
Basically, is there a legitimate way of installing a Windows 7 Upgrade onto the 500GB drive, on the basis of there currently being a valid XP installation on the 160GB drive?
I have no intention of continuing to use XP after the upgrade, if I am able to install and activate Windows 7 to the new drive, then this will serve only as a backup for my files.
Has anybody tried something similar and succeeded/failed?
I've already read the tutorials on here about doing a clean install of Windows 7. I'd like to avoid dodgy workarounds, as I'd rather not run into problems further down the line when it comes to updates and that sort of thing.
View 9 Replies
View Related
Jun 3, 2012
I installed windows 7 on my computer that has two hard drives and I tried to remove the secondary drive ( it was used as storage) when I removed the second drive I was then unable to restart my computer. I tried to repair start up from the install disk (3 times) it did not work. when I plug the second drive I am able to start up again. I would like to remove the storage drive and replace with a larger. I bought a wireless seagate 2tb free agent goflex hard drive and wanted to put the 2 tb hard drive into the computer and take my 1 tb drive from the computer and use it in the wireless system.
View 3 Replies
View Related
May 25, 2012
I'm running Windows 7 64x Home Premium on a Toshiba Qosmio X505 laptop. I just got it back from the warranty repair center, where they replaced the hard drive and graphics fan & heatsink, and reloaded the factory windows version. Before I sent it out for repair, I used Windows Backup to create a backup of all my files on a Toshiba casio 500GB external USB drive (I had over 300 GB of files, so it was easier to use Windows Backup than drag and drop all the files, at least at the time). Now that I have the laptop back, I'm having trouble restoring my files. When I go to Control Panel-> Backup & Restore, a message appears in the restore section, saying "Windows could not find a backup for this computer." I've tried reconnecting the drive as well as restarting my computer, but to no avail. I can see and explore the files in My Computer, so I know the hard drive is properly connected.
View 7 Replies
View Related
Jan 5, 2013
I have a 120GB SSD for system etc. I have a 1TB HDD for everything else. How do I change the default program files folders (x86 and regular) so that when I am installing a program the first choice is on this second drive instead of C?
View 3 Replies
View Related
Nov 14, 2012
I have a hard drive I want to backup to a 64gb flash drive and then restore it to another different hard drive than where it came from. I have windows 7 and office on my laptop and I want it on my desktop pc. There isn't close to 64gb of info on my laptop so it should be fine even though the hard drive says I have 160gb. It is all free space except for those programs.
View 3 Replies
View Related
Jun 16, 2012
I am unable to use the Windows 7 image backup program because it doesn't see my second internal hard drive. I can see the drive in disk management. ( it shows up as SDATA1 D drive) and has plenty of room left 400 gigs out of 700 gigs.
View 1 Replies
View Related
Oct 1, 2009
At present I use Vista and will be upgrading to Windows 7 o/a 22 Oct.
My total C & D drives use 110 GB so I would like to puchase something in that area and
it would only be used for emergency backup. I have looked at several but I noticed that
all of them only function with XP & Vista and no mention of Windows 7.
I would appreciate a recommendation that will function with Windows 7.
View 2 Replies
View Related
Oct 1, 2012
I'm trying to backup my data on my laptop to an external hard drive. Windows isn't recognizing it for some reason.
The laptop is an HP running windows 7 and the hard drive is an Eagle Cansus. Using the windows commands in the control panel don't seem to help.
View 3 Replies
View Related
Oct 10, 2012
I have been using a commercial company to back up my computer for the last 2 years. Now I have decided to do my own backups. I already did the first back up to the external drive. Now its time to back up again, when I back up again, will everything be backed up again? Or just the files that have changed?
View 1 Replies
View Related
Sep 1, 2009
Acronis True Image Home 2009
There are manufacturer specific free versions for downloadWestern Digital Edition
Maxtor MaxBlast 5
Seagate DiscWizard
Other Manufacturers may have free versions of Acronis Imaging that I am not aware of.
View 5 Replies
View Related
Oct 10, 2010
I recently had much trouble with my computer and was reinstalling OS many times! XP and windows 7. When I was installing windows 7 there were 3 virtual drives one about 400 mb named windows reserved and 2 others each (300gb) the 3d one was backup. I formatted first 2 deleted partitions, made 1 partition formatted again and then installed windows. The 3d virtual hard drive backup disappeared with all my stuff. Now I just have Local disc C: which is 300 gb and nothing else. So I am missing 300gb virtual hard drive with my stuff, where did it go?
Computer is Inter (R) Core(TM) i3 CPU 530@2.93GHz
MSI Motherboard H55M-E33
Hard drive WDC WD6400AAKS-00E4A0 ATA Device
View 1 Replies
View Related
Jan 19, 2012
I am running "windows backup and restore" on one of my external hard drives and WDsmartware (western digital software that came with my other external drive). WDsmartware eats up WAY to much resources. Would I be better off just using "windows backup and restore" for both drives? are there any free programs out there that are "better' than windows 7 "backup and restore"?
View 5 Replies
View Related
Dec 21, 2012
I'd like to automatically backup certain folders to an external hard drive every time it's plugged in. I've tried Windows 7 Backup tool but it creates an icon and I would like the folder to be able to be navigatable (for the reason that I need to know what has been backed up and what hasn't, also I don't want to restore an entire folder at times, sometimes I just want to restore a couple of files).
How can I make this happen? Using either Windows 7 backup or another tool
View 2 Replies
View Related
Oct 9, 2009
I'm trying to set up the Backup to an internal hard drive called Z: After originally installing win 7 64bit, I had to manually assign a drive letter to the hd before windows would see it. This HD has nothing on it and is not used often so its perfect for my windows backup. However, when I start the backup setup - it does not list that hard drive in my options to backup to. When I manually goto CMD to run "wbadmin start backup -backuptarget:f: -include:c:" it gives me the error saying the HD is read-only and cannot store backups.
Under disk management, I am not allowed to reformat the z: drive - it says "Windows cannot format the system partition on this disk." It lists the Z: drive as being system, active, primary partition - WHY DOES WINDOWS THINK IT IS THE SYSTEM HD? It has 100% free space according to diskmanagement.
I ran a chkdsk on z: (it is still going on step 5) and there doesn't seem to be any errors yet :/ Any suggestions?
View 0 Replies
View Related
Nov 8, 2009
I am acquiring a 1.5TB external drive. I will be basically have a single 1.5TB file on this drive. It will be a Truecrypt encrypted archive.
Given that the entire hard disk will be occuppied with one huge file, what is the best way to format it? Is NTFS still the way to go? Does it make sense to increase the cluster size above the 4KB default?
I am concerned about both performance and not wasting space, but the performance is the lesser concern.
View 8 Replies
View Related
Oct 21, 2012
Yesterday and today I'm constantly getting warnings from windows, that it detected a problem and suggested to backup my hard drive. I currently have 2 drives. the c:/ is where windows resides (60gb ssd drive). The second one is an older (3 years old) from my old computer where my programs reside. It is this latter one D:/ (500gb seagate barracuda) where windows is telling me to backup.
I just installed another WD 500GB black (also about 3 years old) so I could backup the D: drive. The computer is running fine. Is windows accurate in being able to find hard disk problems before they become an issue? I'm afraid that if I take out the drive and send it back to seagate they might not find anything wrong with it. Is there a way to test and fix it with software?
View 6 Replies
View Related
Apr 17, 2011
I'm looking for an external hard drive to backup all of my documents that can do the following:Say I have the hard drive already. I have all of my documents on my laptop and a copy of each of them in the hard drive. When I finished writing a new document and plug in the external hard drive, the hard drive will automatically detect that I have a new document and will make a copy of that document in the external. The hard drive will also automatically copy and replace any new version of the existed older documents.
View 6 Replies
View Related
Oct 8, 2012
I image Win 7 to acronis and wondered if I could restore an image to a new hard drive from the exterior hard drive?
View 6 Replies
View Related
Jul 28, 2012
Would like opinions on preferred easy full image back-up apps.
View 2 Replies
View Related
Oct 15, 2011
I just got a new laptop DELL Inspiron 15R N5110 (i3 processor, 3GB ram, 500 GB hard disk) 2 days back. Suddenly the system started lagging and it hanged last day. When I tried 2 restart, it said there is an error in loading d hard disk. It asked me 2 boot several times. The laptop now have started making clicking noises. Its now even getting heated up also. I ain't able to restart it now. I've my documents saved on d laptop in a separate drive. (I had partitioned d drive as C and D where D is for my personal data). I m very much concerened about the data which is present in d laptop now. Will I be able 2 retrieve it back??? How should I repair it?
View 3 Replies
View Related
Jul 16, 2012
I've got a new Dell Latitude which is used for business. I've encrypted the hard drive using Truecrypt. I've encrypted the entire drive, not just made an encrypted container.My question is though, if I use the windows 7 backup and restore feature, and backup the hard drive to a NAS device, in the event of the laptop being stolen, or if I choose to work with files on another computer, will the files which windows 7 backs up work? I work in IT, so have years of experience here, however encryption is something which I am only just learning. If the windows 7 backup and restore feature will not support this, can anyone recommend an alternative? I've looked into Acronis True Image Home 2012, however still need to evaluate this.
View 1 Replies
View Related
Nov 25, 2012
i just bought a new computer running windows 7 home edition. my question is, can windows 7 make an entire image of my hard drive including (and this important) the recovery partition? If It can can anyone please tell me how. i need to have a complete backup of my hard drive in case of hard drive failure.
View 1 Replies
View Related
Dec 10, 2012
Can you backup installed applications to an external hard drive, then restore them to another Computer without Reinstalling them? For example, My computer Windows 7 Home Premium has many softwares, applications, programs, utilities, etc. That I purchased and don't want to Reinstall them on new computer. Is it possible for them to work without Re-entry keys?
View 9 Replies
View Related
Aug 1, 2012
My windows vista computer died. I have backed it up on and Iomega external hard drive but can't figure out how to restore the information to the new computer which is a windows 7.
View 12 Replies
View Related
Oct 9, 2012
How do I properly configure a new HD for an HP using HPs SYSTEM partition and FACTORY_IMAGE Partition.
View 1 Replies
View Related
