I am unable to use the Windows 7 image backup program because it doesn't see my second internal hard drive. I can see the drive in disk management. ( it shows up as SDATA1 D drive) and has plenty of room left 400 gigs out of 700 gigs.
View 1 RepliesI've recently uninstalled itunes. When i restarted my PC i noticed that my internal secondary drive was missing. Reboot and still nothing. Powerdown wait 30 sec and swjtch back on: still missing. I finally opened it up unplugged it and replugged it and it found it again.
I then rebooted again and again it was missing repeated steps above same result.
Dont know what to do ant its a hassle to open it up every time. Windows 7 ultimate. Sata Seagate barracuda 2tb
I have a Core 2 Duo PC with 2 SATA internal drives:
Seagate 320 gig, with C and D partitions. C contains a legit retail upgrade version of Vista Home. D is for data.
Western Digital 640 gig, with a single E partition, currently used as backup.
I ordered a Windows 7 Home Premium retail upgrade at the discounted price a few months ago and expect it in a month.
My Seagate drive is running low on space and I want to retire it. I would like to boot to the Win 7 DVD, have my Vista install on the Seagate recognized, and then do a clean install of Windows 7 on the Western Digital drive, currently E.
I hope to buy another considerably larger backup drive shortly to replace the Western Digital as a backup drive.
Will the WD drive be available as a location for the installation in these circumstances?
Any previous time I have installed MS operating systems, I always chose to install to the same drive as the existing OS. This time things are different due to little space on the Seagate drive. Windows 7 would certainly fit on my current C, but I want to retire that drive.
Or will this remain a complete unknown until some time after October 22?
Or will I be forced to install to the Seagate and then somehow migrate the install to the WD?
I have not played with the RC, so I don't know what options are normally presented during the install.
I'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed. It's a pretty new drive and I've never had any problems with it before. Please can someone tell me how I can start using it again?
View 8 Replies View RelatedI'm using Windows 7 and I have four hard drives in my computer labeled C, E, F and G. A few days ago I got a BSOD and my computer wouldn't start up after that. I've been having a few problems with the C drive lately so I bought a replacement and restored from my Acronis TrueImage 2010 backup. That went fine and my computer now works as it did before with my F and G drives connected, but not my E drive. If I try to start up with my E drive connected my computer just gets stuck on the "Starting Windows" screen. If I look at my BIOS settings with it connected it is not listed.
View 3 Replies View Relatedusing Windows 7 here. I have a folder on one of my internal HDs that I am frequently changing and adding to for a project I am working on. What I am used to doing, is just dragging the folder to an ext HD for bu.Is there a way to do Incremental backups here? So if I bu on Mon to the ext HD, and make some additions on Tues and Wed, come Wed eve I don't want to have to figure out what is new. Can an incremental backup be utilized here?
View 7 Replies View RelatedSince then I have installed a SSD for the operating system and porgrams so just use these drives for back-up and user data. I have another PC that i use for all my main work and photographs which I backup nightly onto one of the HD on my wife's PC 320HD. I have gigabit ethernet conenctions via my router. Also once a month I backup everything to a 500GB portable drive that i keep outside of the house. Problem is as my photo collection grows I am running out of space on the 320HD. So my question is if i want to get a bigger back-up HD should I:a) Buy a large external drive which I just leave permantently attached to my pcb) Replace the 320HD with a larger interanl HD. IF so can I put any old HD into the Vostro or are there so restrictions I need to look out for compatabiltiy
View 6 Replies View Relatedhow can i make a backup/ system image for my internal and external hard drives at the same time?
View 4 Replies View Relatedcan u backup your data (or an system image)to an internal and external hard drives at the same time?
View 1 Replies View RelatedCan I connect an Internal IDE DVD Writer and an Internal SATA DVD Writer to the same Motherboard?
View 6 Replies View RelatedSo basically, a couple days ago, I installed a new ASUS Mobo, Intel CPU and Vengence RAM. But when I tried to boot into Windows 7, it would act like it was loading just fine, and then get a BSOD so quick that I couldn't read it, and fail to boot (I do not have an OEM copy of Windows). With not many options, I decided to reinstall Windows to fix my problem. And in that install screen, it listed all of my HDDs, without letters. I was like "uh-oh, which one is it?" So, I pick one, and it's the wrong one. But, instead of removing Windows from what was my D drive and now is my C drive, I'd like to just remove Windows 7 (the still corrupted one) from my now D drive. Is that making any sense? lol So anyway, I know that you can't just "uninstall windows", and I've read about just deleting the file folders... but that I have to give myself permissions to do it. Of course, I can't seem to do that. I have several to choose from, including "trustedinstaller" "creatorowner" "System" "Administrators" nothing seems to work. They even have full access and permission, and when I try to delete the Windows folder, it says "you must have permission to continue" I click okay, it continues, and then says it can't delete the folder. When I try to give permission to one of those names, it denies access for the Windows folder.Oh, also, formatting is really out of the question, as this D drive has all my precious files on it that I can't lose. But, I do have enough space to maybe partition it, copy it all over, and then format the windows partition?
View 4 Replies View RelatedI recently baught a Clevo Metabox P170EM laptop (the Australian version, i think the US version is by Sager), and it has a 128gb SSD Crucial M4 and a secondary 750gb HDD. I am not actually sure what kind of harddrive it is, all I know is that it is 750gb 7200rpm.I baught the laptop without an OS, as I had a Windows 7 disk already, and I had to go into drive management to format the secondary HDD. That all worked fine, I got it up and running, and was copying data across for a day. I also installed a couple of games (Crysis 1 &2, Dragon Age Origins if it matters) and played them from the secondary drive without a hassle.While playing, I got 122 Windows Updates which required a restart. So I let them install while I worked on clearing up my old laptop.Next time I booted the new one up, all of the icons for the previous games were blank and the HDD was unavailable. It doesn't show up in My Computer or Disk Management or even the BIOS (is that normal?)It also seemingly uninstalled some of my drivers - my nvidia GTX 670M wasn't recognised til I reinstalled the driver from the CD. I tried reinstalling every driver but no luck for the HDD.
View 1 Replies View RelatedI have a windows 7 Pro OS running which was loaded with one HDD attached. Windows was running fine. I installed a secondary HDD to allow some backup; it was able to be installed, fully formated and was healthy. I tried to backup but was told by windows it was not large enough so I uninstalled by accessing device manager from inside computer management and clicking uninstall and confirming device removal. There was then, no visible indication that the secondary drive was installed. I shut down and physically removed the secondary drive and tried to reboot but all I could get was "A disk read error occurred. Press Ctrl+Alt+Del to restart". So I reconnected the drive and it boots fine. My question is, what do I need to do to be able to disconnect the secondary drive without getting that error?
View 4 Replies View RelatedWhen i connect a sata hard disk which is loaded with windows 7 as a secondary to another windows 7 system to take the data backup it is not showing the drives but i can see it in the device management in windows 7.
View 14 Replies View RelatedIm currently using a 32 bit OS and thinking of changing to a 64 bit OS. I currently have 2 1TB HDD. Will it be ok if i install a fresh 64 bit os in my secondary HDD and change it to my boot drive?
View 3 Replies View RelatedI just built this computer a couple of months ago, yesterday I turned on my computer in the morning, and it ran fine, did my usual morning website raid on soccer etc, turned it off went out to do some errands, came back and turned it on and it kept hanging on the "Windows Loading" screen, read around about a couple of things it could be, i think I narrowed it down to my secondard hard drive (WD 500G Caviar Blue) which i use for storage and downloads, all my games and OS are installed on my solid state.
So whenever my secondary hard drive is plugged in, my comp hangs on "Windows Loading". If i unplug it, it loads up windows quick and easy like always. I turned on hot swap, and if i plugged in my HDD after my computer was already loading into windows, it would be fine than once it recognized it, it would start crashing my windows explorer etc constantly. I tried switching SATA ports, now it goes into windows with the hard drive plugged into another SATA port, the HDD is recoginzed in Disk Management, and is also recognized in device manager, but I cant access it.
These are my specs.
Intel(R) Core(TM) i5-3570 CPU @ 3.40GHz
ASUSTeK COMPUTER INC. P8Z77-V LK
OCZ-VERTEX4 128GIG SSD
WDC WD5000AAKX-004EA0 500GIG HDD
NVIDIA GeForce GTX 670
4x4Gig G Skill Rip Jaws 2133
Microsoft Windows 7 Ultimate 64-bit 7600 Multiprocessor Free
I currently have a standard computer setup with a windows 7 operating system installed. What I want to do is dual boot with Windows 7 as my primary os but using an esata cable connect the hard drive from my laptop to the computer and have this as a secondary boot option. The laptop hard drive has a full install of vista on it. Is this possible, every time I think about doing it I worry about the drivers on the laptop hdd and how those will react to my main computers hardware as obviously the laptop hardrive is setup to look at the laptop hardware.
View 2 Replies View RelatedI have an SSD drive mounted as a secondary master on my motherboard that has lost performance. I did have some things on the drive that I ended up deleting because load times were painfully long. I did not format the drive using the format options in Windows as I know this further degrades performance for SSDs, but there is nothing on the drive at all right now.
My question is, is there a way to secure erase the drive while still inside Windows? All the info I've found regarding secure erasing a drive has to to with having to boot the computer with some disc (insert title), unplugging the sata cable to the drive and plugging it back in, running said program, and erasing the drive. I understand this if the drive is the Primary Master and Windows is to be installed on the drive, but this is not the case for me.
Is there a way to do this inside Windows since its a secondary drive, meaning Windows is on a completely different drive, or is there a program or something for SSDs where you can restore performance inside Windows.
I have an Asus Striker Extreme motherboard. Since I have a PS3 but access to only one ethernet port, I've bridged my two motherboard ethernet adapters and plugged my PS3 into my computer so they can share the connection.I'd like to know if it's at all possible to configure Windows somehow to prevent it from going to sleep while there's any activity over the network bridge. Obviously I prefer to keep Windows' power saver scheme intact or I'd just disable sleeping entirely. However I don't want to have to reach over to the computer and bumping the mouse every ten minutes as I'm playing to prevent it from sleeping and cutting off my PS3's network connection.
View 17 Replies View RelatedI installed windows 7 on my computer that has two hard drives and I tried to remove the secondary drive ( it was used as storage) when I removed the second drive I was then unable to restart my computer. I tried to repair start up from the install disk (3 times) it did not work. when I plug the second drive I am able to start up again. I would like to remove the storage drive and replace with a larger. I bought a wireless seagate 2tb free agent goflex hard drive and wanted to put the 2 tb hard drive into the computer and take my 1 tb drive from the computer and use it in the wireless system.
View 3 Replies View RelatedHow to Run the Windows Photo Viewer Slide Show on a Secondary Monitor ?
View 0 Replies View RelatedWhen you wish to recover your system using this utility, do you use the Windows program at desktop or the rescue disc I created from the program?The reasn I ask is because I used to have better luck using Acronis' disc rather than the program and wonderd if the same applied here.Also, does the backup remove the existing one so that you only have one at a time or can you have more than one.
View 2 Replies View RelatedIs there a way to use Windows Backup to backup to a network drive?
View 6 Replies View RelatedI backup 100GB of data with Windows Backup and over the time where I do all my backups there is like only 30GB of data which changed from those 100GB and also new files were added. Now my external drive is full. When I now delete the very early backup, the first one where the 100GB of data was saved, will it delete then ALL those 100 GB, or will it just delete the previous versions of the files which were modified AFTER that time, which are in this case the 30GB I talked about? Because otherwhise I would then have in the end an uncomplete, messed up backup.
View 9 Replies View RelatedI currently use Vista Ultimate. I am preparing to move to Windows 7. Is it possible to restore files from Vista Backup and Restore Center to Windows 7 after a clean install?
View 3 Replies View RelatedI'm using Win 7 Pro and want to schedule several backups to my NAS. With Win XP, I was able to schedule multiple backup jobs, which makes things easier since I have 116 GB of data. I like to backup my documents, email files, etc. every week, but my photos, MP3s, etc. don't change as frequently so once a month is fine for that. Not surprisingly, the media collection takes much longer to backup, which is another reason I try to separate it from my "regular" backup.Unfortunately, Win 7 backup only seems to allow one backup job to be scheduled, which seems awfully limited. Am I missing something? Are there other free backup utilities that would work better, or do I need to shell out some cash?
View 4 Replies View RelatedI have been going through the SSD optimization guides in the forums and had a question when disabling services like Superfetch, and Prefetch. Will this affect the performance of my secondary HDD? I am using me SSD for Windows 7 and programs and using my HDD's for storage.
View 6 Replies View RelatedMy first hdd is the ssd and i dont want stuff installed on that i just wanted the os on it and now everything i install goes straight to the ssd anyway i can move it to my secondary 1tb hdd
View 1 Replies View RelatedCurrently my PC is set just they way I like so I thought I'd do a backup, the idea being that should something go wrong then I can just use that backup (on DVD's) to do restore my PC to the 'now' settings.
View 3 Replies View RelatedWindows 7 Backup always stops around 58% when it tries to backup "Boot (C" What should I do?
Windows Sicherung bleibt stehen bei 58% bei Systemabbild von "Boot (C" wird erstellt.
I just instaled a ssd and im usen that to boot from and have another drive as slave what do i need to do to play games from that drive? Also can i install games to the secondary the slave and play from that to save space on my ssd?
View 8 Replies View Related