New Hard Disk Recognized By Windows 7 But Not By BIOS, Install Failed?
Aug 23, 2012
I have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.When I am trying to load windows into it I get the errorWindows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menuThe Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)[CODE]
View 1 Replies
ADVERTISEMENT
Jan 11, 2013
I have 3 internal drives. Drive C has Windows 7 installed. Drive F I use as a backup. I'm trying to install Windows Server 2008 on Drive E. Drive E has been formatted, shows up in Windows Explorer, takes data, etc., but it does not show up as an available disk for the install process. The other 2 show up as install options but not Drive E. I've unplugged, rebooted, unplugged Drive F, booted from CD, and the drive will not appear but appears in Explorer.
View 6 Replies
View Related
Dec 9, 2009
hard drive registers in BIOS, but not in the windows 7 Ultimate 64 bit installation screen. Any questions I will answer RIGHT away. Oh dear God please help me. I took it in to a repair shop and I think I knew more than they did and left without any substantive help (but a $40 bill ). Do I need to format the HD? Would drivers help? All the websites say everything should be compatible - no problem - but nothing here.
WD Blue 640 GB (single HDD)
AMD Phenom ii
GA-MA785GM-US2H Gigabyte motherboard
OS: Windows 7 Ultimate 64 bit
View 4 Replies
View Related
May 19, 2012
A friend of mine's computer stopped working a few days ago. When turned on they only get a message to change the boot sequence or insert boot media.
I took out their HDD and attached it as a external to my computer. I then backed up all their files (the drive appears to be working fine.) not being sure what the issue was I decided to reformat the drive and re install a clean version of win 7.
After finally getting the drive completely erased I reformatted as NTFS and installed it back into the computer. At this point The bios did not recognize any HDDs or optical drives (I had the win 7 disk in the DVD drive).
I created a bootable USB win 7 disk which the computer did recognize and initiated set up. At this point the set up process does not recognize any drives.
Not sure what to do to get it to recognize the drive. My initial thoughts are formatted incorrectly.
View 1 Replies
View Related
Apr 6, 2012
i accidentally wiped my hard drive and recovery partion on an HP Pavillion G6 laptop running a 500 Gig seagate hard drive and now it will not recognize the drive.i can not format it or do anything please help.
View 7 Replies
View Related
Dec 11, 2012
and came to know that it is not possible to install os on the dynamic so i wanted to convert my disk into basic one .for this i downloaded a software HxDwhich said me to change sequence of numbers that r associated with the disk by a process of entering into the disk codes and changin hex numbers associated withit.and then it said me to restart.nd i did...i restared and suddenly the system asked me for system repair,but i chose to enter normally ,but it did not start and again asked me for system repairi did so,but it showed an error and said it cant be repaired.so i decided to install os again(windows 7) wen i did so,it could not recognise any hard disks,?
View 3 Replies
View Related
Feb 20, 2012
I will try to explain this.First i have Asus laptop N75sf and it comes with two hard disks Seagate ST 9500423AS each 500 gb.The one i use for storing documents movies etc. it is not recognized.But i can use the laptop because the other one is good and there is my windows installed.When i turn on my laptop the hard disk makes some noise more than usual but after a while it stops.Sometimes my laptop freezes completly and i cant move my mouse nothing.
View 2 Replies
View Related
Nov 12, 2009
I recently purchased a WD Scorpio Black 320GB 2.5" HDD for my Gateway MX6920 notebook. I wanted to upgrade to this larger, faster HDD and replaced it into my notebook and attempted to install Windows 7. During setup it stopped and gave the error 0xc00000e9 for "unplugging a removable storage device such as an external USB drive ......".
I tried installing Windows XP and it gets to a blue screen to choose a Repair of Windows or a fresh install. Choosing either one returns a blue screen that says system can not find a Hard disk connected.
I put this drive into an enclosure and formatted it in another computer. Also it is recognized in BIOS. I'm running BIOS version 77.08 if relevant.
View 2 Replies
View Related
Sep 6, 2012
I have a HP Probook 4530swith Windows 7 Home Premium 64 bit. When I turn on the PC the windows does'nt start and give a option of starting windows manually, which does'nt work, and repair windows. Repairing windows with windows 7I then decided to reinstall windows 7, but while installing, on the select disk page, it shows a error saying no drives found.I then performed a Hard Disk Test which resulted in failure saying:Failure ID : UC7WX0-5NB67S-XD6V5G-60TF03
View 2 Replies
View Related
Aug 14, 2012
trying to install Windows 7 on sony laptop with a copy that is different from the original copy of Windows 7.did partdisk, clean all, create partition, and dvd install gave the "can't install to disk, turn on disk controller in BIOS" error. there is no disk controller function in my BIOS.if partdisk clean all was successful, does that mean the HDD and its controller board are ok, that is, not physically damaged, and the problem is with software/installation/setup etc.?what should i do next, in order to have a successful install?
View 9 Replies
View Related
Dec 22, 2011
I am running windows 7 64 bit, on an eMachines lap top, I have purchased an external HDD and now I am trying to create a perfect copy of my system. I used DriveImage XML but it failed. I have used this program in the past with great success on a different computer running WindowsXP.The failure I get is "failed to lock drive". I've tried skipping the lock drive option and going straight to shadow copy; same problem.I can only assume the failure to lock drive is based on permissions and files being in use. So I think I need to attempt this without loading windows. Is there anyway of running a "free" drive cloning program from a DVD or USB Flash drive without booting into Windows?I would just bit torrent a win7 OS, install it on my external, and run the program from their, but I don't want to have to resort to law breaking, and I have never run linux.
Also I tried using a "backup" feature on Paragon Partition Manager, it did "backup" the system, but it didn't clone the drive. All the backup files are written in directories such as "C:/archive/" and thus I assume there is no way of booting into a system written that way. I assume it's like windows system restore, and what I need is a bootable image of my primary drive.Oh and I should clarify, that it's not my external drive that fails to lock; the external HDD has been formatted, partitioned, and can read and write data just fine, and has way more than enough room to copy the HDD in my lap top.Also, the HDD on my lap top has 1 primary partition, with two logical partitions. I have no idea what the logical partitions are for and if that could be causing the problem.
View 8 Replies
View Related
Aug 27, 2011
I'm currently using a Windows 7 PC built by a friend of mine, but starting yesterday, its been acting up. The problem is there used to be two hard drives I can access, Drive B and Drive C. When I boot up the computer, BIOS only detects Drive C (if I'm not mistaken), and Disk Managements as well. I realized this when all the programs whose targets are on that drive are all broken on the desktop.So Drive B doesn't show up anywhere at all.
View 29 Replies
View Related
Nov 12, 2012
I have two 250gb drives that are connected to my one Eide connection on my Asus P5Q deluxe Mobo. They show in the bios and on startup, but not in my computer or drive manager? How can I get them to show up so I can format and use them as extra space.
View 3 Replies
View Related
Jan 21, 2012
I have a Dell Inspiron 1545 (2.5 years old). All my data is backed up so I have no concerns about recoverying data.First, the laptop crashed and ran several chkdsk on start up. I froze several times during this. It said it had fixed some errors then started up again.This time it wanted to do start up repair. Same thing kept happening, froze at least twenty times during this. Eventually it gave me the blue screen of death.
'Technical information
*** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8004C1D260, 0xFFFFFA8004C1D498, 0xFFFFF8000130DDA0)'
This repeated several times. I ran the diagnostics and it told me the hard drive could not be found (error code 0146, 2000-0146). Essentially, it's a Dell laptop (I know) and I am not bothered about recovering the hard drive.I would, however, like to install Windows 7, or alternatively Linux, onto my external hard drive. But I just can't seem to get it to work.I have extracted a Linux iso to the external hard drive I want to install on, onto a cd, onto a FAT32 8gb usb stick, but it has given me the bootmgr is missing error every time. I have tried it with the interal HDD in and removed.I am no longer concerned about the internal HDD, i can use it for a door stop for all I am concerned, I just want to load ANY os onto my external hard drive so I can get the laptop working.
View 9 Replies
View Related
Apr 6, 2012
After I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical). Ubuntu 11.10 can boot fine.
View 2 Replies
View Related
Apr 26, 2012
Basically what happened was I deleted the factory partitions on this laptop( HP Pavilion G6) using disk management down to two partitions and attempted to install Ubuntu on the other partition.After a horrendously failed attempt to install Ubuntu, disk management will not recognize my hard drive even though I can see it and access it through windows. I just want to re-partition it so I can set up a recovery partition.It wouldn't boot up after the failed install, saying I had no operating system, but I used a Windows 7 repair disc and now it boots up fine, but disk management doesn't show my hd or any partitions.
View 3 Replies
View Related
Nov 13, 2009
I have few questions on Windows 7 Upgrade. Currently I'm using windows vista home premium 64 bit and I bought an windows 7 home premium 64 bit upgrade disk.
first thing is I want to format my previous operating system and all the data in my laptop and install windows 7 in it using the Upgrade disk.
second thing is I don't have my vista installation disk with, my laptop was pre-installed with vista so in future if I want to switch can I get back VISTA using system restore.
third is can i install windows 7 on a new hard disk using a windows 7 Upgrade disk?
View 4 Replies
View Related
Nov 13, 2012
I bought a new laptop two weeks ago, the os it is running now is windows 7. . There is only one hard disk insideit in 300 gb but in my computer file it is two seperate hard disk.You can see that there are two hard disk one in 99.9 gb, and another is 198 gb. But the windows was installed in 99.9 gb but still i can access the files in 198 gb.
View 9 Replies
View Related
Feb 10, 2011
I got a Dell Inspiron 6400 with XP and I'm trying to do a clean install of Windows 7 but this message shows up, any ideas how I can get passed this?
View 9 Replies
View Related
Jun 28, 2011
hai can i install xp and windows 7 on one hard disk
View 2 Replies
View Related
Feb 2, 2012
I plugged it into my pc, but I cannot see it either in Windows or in the BIOS. I want to run a diagnostic of it to see what is wrong with it, but since I can't access it I can't do anything with it.
View 1 Replies
View Related
Jul 19, 2012
I installed an old 160GB Seagate Barracuda into my Win7Pro64 machine for some extra storage room. At first it worked fine. I cleaned it out and did a quick format in Windows.
Now Windows does recognize it at all. I see it in the BIOS but it won't show up in Windows.
View 2 Replies
View Related
Jan 21, 2013
It's a hp pavilion elite m9652uk. Getting really frustrated. I'm installing from USB with Sata drivers on them but they don't help!
View 9 Replies
View Related
Dec 27, 2011
I have had xp for a long time on a custom computer. Recently I contracted a virus (namely the xp antivirus 2012 system virus). I decided to reformat the hard drive, as I do not have the original xp discs, I bought windows 7 (the full version, not upgrade). While trying to install windows 7 and subsequently reformat the hard drive, the installation program can not detect any hard disk whatsoever.
Another problem is that the virus has corrupted my computer to the point where I cannot even load xp. All my computer is currently good for is watching it try to load.
View 9 Replies
View Related
Jul 14, 2012
2 weeks ago i replaced XP with Windows 7 Pro 64 bit on my PC and since then my D: drive randomly disappears. I have been using the PC which has 3 internal disk drives with XP for the past 3 years never having problems with the disk drivesSince i installed Windows 7 Professional 64 bit, the D Drive is dropped from time to timehen i look under device manager the disk is completely gone, and also if i go to command, diskpart, list disks .... it does not show up.
View 7 Replies
View Related
Mar 21, 2011
I'm currently running a WD 500g with Windows 7 Ultimate x64 and a Seagate 250g with Windows XP Home Edition. I recently changed my BIOS boot order from the WD to the Seagate to see if I could still run XP. Turns out I can. My problem is that now I can't load Windows 7 back up on the other hard disk.Bear in mind that I have no other OS' loaded on any other partitions, and these HDDs are separate. The Seagate is IDE and the WD is Sata.I can load perfectly fine if I set the Seagate to load, but I get the infamous "Bootmgr is missing, Press Ctrl Alt Delete to restart" error msg when I try to boot win7.
I'm running a custom PC with a Gigabyte GA-X58A-UD3R mobo
nVidia GeForce GTS450
Seagate 250g Windows XP
Western Digital 500g Windows 7
6g RAM
i7 940 processor
View 1 Replies
View Related
May 19, 2012
Yesterday, I just reinstall fresh windows 7. After I install the OS, I just realize that my recycle bin is empty. Before I installed windows 7, some of my deleted files on my other hard disk is there. But now, I could not find it anymore. After that, I tried to select show hidden folder, files, and drives and unsellect hide protected operating system files on folder options. I try to browse to one of my hard disk, which has the deleted files on recycle bin before, then I found it the recycle bin icon there as well (For instance, the path of the drive is: N:$RECYCLE.BIN). I tried to look at the properties, and I found that the missing size of the deleted files was on there. The problem is I cannot access it. When I tried to open the recycle bin, it just empty. I need some help with this. How do I retrieve the files again to the OS recycle bin, not the hard disk recycle bin? Is it possible to access it again? I really need those files back.
View 8 Replies
View Related
Nov 11, 2012
Originally got message - Disk read error occurred press ctl alt del to restart. Then tried plugging this drive using a USB connector into my desktop PC to see if I could run some chkdsk. Then my desktop PC displayed messages telling me my firewall and virus software had been turned off and the computer crashed. ROOTKIT? So I was left with 2 drives not working. I re installed windows on desktop but using ISO on flash drive BUT can't on the 500GB Hitachi HTS545050B9SA00 for some reason. Windows setup loaded and Deleted old partitions and formatted. When I tried to install, it froze. It now just boots up with a windows loading screen and I'm also unable to boot from flash drive as it freezes. This is on a Sony Vaio VPCEB4E4E.
View 2 Replies
View Related
Jul 28, 2012
I have purchased an adapter that holds a drive or SSD and fits instead of the DVD drive. When connected windows from the main drive recognise it as second drive and all is hanky-dory the issue is that i want to install windows on the SSD but the SSD is not recognized as bootable by the BIOS and after seeing it is a common issue with no solution on many web pages i have left wondering if there is a way of booting windows from thehard drive but somehow diverting it to the SSD - maybe hard linking all system files or something...
View 6 Replies
View Related
Jan 1, 2012
I want to install Windows 7 on a clean drive.... but I cant even get to the install options, because the drive is not recognized when i turn on the machine. It stalls, even before I can get into the BIOS settings.I need to manuallly disconnect the drive > then change back to IDE mode inside the bios and now I am able to install Windows.The funny thing... I have a backup image of a running Windows 7 installation and if I copy it onto the exactly same drive it runs without problems in AHCI mode another weird thing.... i already installed Windows 7 in IDE mode and thought that maybe later, once the installation is done i could switch back to AHCI.well, same thing.... once ahci mode was enabled in the bios, the drive was not recognized anymore.i also tried to install the chipset drivers from within windows and got a "the system does not meet the minumum requirements."
View 8 Replies
View Related
Dec 20, 2012
it was working before the BIOS Update My Board is Intel DG31PR Updated to the [URL] and i dont remember the old BIOS version?
View 2 Replies
View Related
