BSOD HDD Failed - Install Windows 7 On External Hard Drive From Boot
Jan 21, 2012
I have a Dell Inspiron 1545 (2.5 years old). All my data is backed up so I have no concerns about recoverying data.First, the laptop crashed and ran several chkdsk on start up. I froze several times during this. It said it had fixed some errors then started up again.This time it wanted to do start up repair. Same thing kept happening, froze at least twenty times during this. Eventually it gave me the blue screen of death.
'Technical information
*** STOP: 0x000000F4 (0x0000000000000003, 0xFFFFFA8004C1D260, 0xFFFFFA8004C1D498, 0xFFFFF8000130DDA0)'
This repeated several times. I ran the diagnostics and it told me the hard drive could not be found (error code 0146, 2000-0146). Essentially, it's a Dell laptop (I know) and I am not bothered about recovering the hard drive.I would, however, like to install Windows 7, or alternatively Linux, onto my external hard drive. But I just can't seem to get it to work.I have extracted a Linux iso to the external hard drive I want to install on, onto a cd, onto a FAT32 8gb usb stick, but it has given me the bootmgr is missing error every time. I have tried it with the interal HDD in and removed.I am no longer concerned about the internal HDD, i can use it for a door stop for all I am concerned, I just want to load ANY os onto my external hard drive so I can get the laptop working.
View 9 Replies
ADVERTISEMENT
Nov 1, 2009
I have two internal 500Gb SATA drives and one external 500Gb ESATA drive.
I wanted to have 2 backups images of my drive as a safety measure. One on the internal and one on the external ESATA drive.
The backup image on the internal drive took about 25 minutues and seems OK. The image size is about 75Gb.
I then tried a second backup on my external drive. ESATA is supposed to be faster than USB. After about three and a half hours the backup stopped and said that it had failed. Any ideas please?
View 3 Replies
View Related
Jun 6, 2010
I just restarted my PC and i kept getting erros regarding hardware, at first it would just hold at updating dmi pool , after i reset the bios to fail safe defaults it would then give me the I/O error. I noticed my external drive was turned off and I turned it on and windows booted fine. Is there a connection here i can disable?
Windows is installed on my SSD drive not my external.
View 2 Replies
View Related
Apr 19, 2012
how can i install win7 or win xp on external hard drive for cary it with me and use it when i need it as another operating system in usb port in any computer?
View 7 Replies
View Related
Jan 12, 2013
What happened to my computer is, I kept getting the BSOD, I went into safe mode, removed the most recent programs I had installed, and it stopped happening. I then proceeded to plug in my external hard drive. It was not recognizing it for some reason, so I went to disk management. It was listed there, just without a drive letter. I tried to assign it a drive letter, and it gave me an error message saying something about refreshing the list, (this is the error message I should have researched), I tried refreshing the drive list, and tried reassigning the drive letter, same message. I right clicked on the drive again, and I saw mark as active. For some stupid reason, I clicked on this. Then seeing that it didn't do anything, I thought maybe restarting the computer would maybe do the trick. Now my computer won't boot.
It gets to the windows logo, and boom, restarts all over again. I tried many things like, startup repair, system restore, marking partition as active CMD, with diskpart, I also tried some of the commands in bootrec.exe. By the way, if this helps at all, my hard drive is a solid state drive, I also have a slave drive in there which does also have a copy of windows installed on it, (it was my old hard drive), I tried setting that as my primary boot and it boots into my old install of windows, before i got my solid state drive. Is there a way I can fix the startup by having access to it from an operating system instead of the recovery environment?
View 8 Replies
View Related
Jun 21, 2010
Is it possible to dual boot windows 7 and ubuntu, with ubuntu on a external hard drive? I can connect my external hard drive via USB 2.0, USB 3.0 or E-SATA. I want windows 7 as my main OS.
View 8 Replies
View Related
Jul 11, 2012
How can I install Windows 7 on my external hard drive using Bootcamp on my Mac?Do not say it would be slow. I installed Mac OS X on it and it works just as fast as on my internal drive and there are no problems at all.
View 3 Replies
View Related
Jan 18, 2009
Maxtor external 500G hard drive causes BSOD on my Windows 7 install.
View 2 Replies
View Related
Dec 30, 2009
I have a Dell Inspiron 1440 laptop with Windows 7 Home Premium 64bit. Some of my older applications do not support this platform. My processor does not support Window Virtual PC and Windows XP mode so I was hoping to add XP as a dual boot. Is it possible to boot XP from an external harddrive or USB instead of having to partition the internal hard drive. Or do you have any suggestions on how I can load XP after Windows 7 is already loaded.
View 2 Replies
View Related
May 1, 2009
can I dual boot using an ext. Hard drive. I found an old 250gb phanton hd I've never used. Figured I could throw it in there. Would vista dual boot to that. Or no??
View 2 Replies
View Related
Oct 11, 2012
My Acer netbook has developed some kind of fault and I am unsure as to what I ought to do. The netbook does boot to BIOS and also will boot up from an external drive...but will not boot normally. I am thinking of replacing the hard drive but don't know if there could be something else wrong. It says sometimes that it can't read it and from this I am not sure if there is something else wrong. If I change the drive does it sound as though things will work? There are also a couple of other intermittent faults such as certain letters and numbers not working and then everything is fine for a while...
View 4 Replies
View Related
Dec 9, 2009
wasn't really sure if that would work since it has to be in the program files can i? bc i have several games and would rather have them on my TB that on my internal HD.
View 8 Replies
View Related
Nov 2, 2012
How can install external hard drive on my laptop
View 2 Replies
View Related
Mar 28, 2012
my desktop computer won't boot. When I turn it on it displays the welcome splash screen and then goes black. A message will then display that says CMD failed to start and then it will shut down. It does the same thing in safe mode as well.My question is. I have already set up the HD from the desktop as an external to my laptop so I could get files off it. Is there any way to do system restore on the hard drive when it is set as an external? Because I did this last night and I think if I restore the drive it will fix it.
View 2 Replies
View Related
Jun 21, 2012
I've just installed a new hard drive and a fresh copy of Windows 7 Ultimate x64 on it, and I just received two BSODs within minutes of each other, citing ntoskrnl.exe withSYSTEM_SERVICE_EXCEPTION on BlueScreenView. I had periodical blue screens before my last HDD died so it's most likely something else causing it, maybe hardware... but not sure how to tell what. I've attached the necessary files.- the original installed OS on the system? Yes- Full retail version- What is the age of system (hardware)? About 5 years- What is the age of OS installation (have you re-installed the OS?) Two days
View 3 Replies
View Related
Jul 16, 2012
So I've been collecting extra parts on the side for a while, and finally got around to throwing them all in a rig yesterday.[code] Now it boots fine and happy. I went to install windows from a dvd, the installer saw both hard drives but told me that "windows cannot be installed to this disk. this computer's hardware may not support booting to this disk" for both. Something about both of them saying that told me it wasn't something wrong with the hdds, especially because the 120gb one was fresh out of a antistatic bag that was sealed from the factory :. I went into bios to figure out why, and after looking around I found a utility called "Super Recovery". It basically allows you to manually put in a reserved system partition on the hard drive that windows usually automatically puts on your hard drive of like 100mb. I did that to the 120, and boom, windows allowed me to install onto it. Windows finished installed completely, and went to restart. My boot priority has always been Hard Drive -> then CD-ROM. The system trys to boot from the hard drive, then gets nothing and boots from the cd again. If I take the cd out, it sits there for a bit, then tells you that you need to insert a system disk. The 120gb hdd is pinned to master mode, and the 80gb is pinned for slave. They are plugged into their respective master and slave plugs on the IDE cable.
View 12 Replies
View Related
Oct 23, 2011
.I didn't wait for the computer to tell me it was ok to remove the drive in the usb port. Now my computer no longer recognizes the external drive After removing my external hard drive (without the ok) my computer no longer recognizes the external hard drive. What do I do.
View 1 Replies
View Related
Mar 6, 2012
Just got a new Asus Zenbook UX31E and am having a certain problem where if I plug my external drive (Samsung S2 1TB, USB 3.0, 2.5") into the 3.0 port windows tries to install a driver for the new device but fails. Now the drive powers on when connected but wont load up as an accessible drive and is not found is disc management.I've tried the HDD successfully in another laptop with USB 3.0 and it works fine on my Zenbook's USB 2.0 port so I'm guessing there's no problem with the HDD itself. Also I have tried a small flash drive in the Zenbook's 3.0 port which worked fine.I have tried updating the USB 3.0 driver to the latest version via Asus' driver database but have got the same result.I would of thought with such a prestigious laptop someone else would of run across this problem but all my googling has turned up ziltch.
View 9 Replies
View Related
Apr 28, 2011
I wish to have a method to install windows 7 (Or any OS for that matter) from a hard drive that contains just the installation files. I am aware of creating system images, ghosting and that whole scene but it's such a long winded process compared to just burning the CD again (Original is in storage and no I don't want to go get it ).
Pretty certain this can be done with some kind of DOS program that is loaded from the drive: When it is selected as primary boot. However, I have no experience with programming DOS applications, or if this is even possible (Pretty sure it is given DOS boot rom's exist).
[URL]
View 4 Replies
View Related
Mar 17, 2012
I bought 2 new 3Tb Seagate Expansion drives model STAY3000300.I tried to "Create a system image" and both 3Tb drives were presented as possible destination discs. I selected one of them and after a couple of messages about preparing and starting the following message was displayed. (same message on the other 3Tb drive as well)The backup failedBIG RED BAROne of the backup files could not be created.(0x8078002A)Additional Information:The request could not be performed because of an I/O device error, (0x8007045D)The system is Windows 7 64bit and bang up to date with Windows update. The system disc is a OCZ Agility 3 120Gb SSD.Another strange thing is I have been doing backups to another external disc for many months - a 1Tb Iomega portable external.The MAIN BU file is about 26Gb and, yes, all my discs are formated as NTFS so it is not a file size issue.
View 7 Replies
View Related
Mar 30, 2012
I have an internal hard disk not in use ,and I would like to make it as external disk !I looked on the net and I found I should have the " encelsure " butt I think I wont find it here in my city .So is there another way ? like usb -esata cable
View 3 Replies
View Related
Mar 4, 2010
Me and my brother built me a new computer from scratch (he did the building - i did the watching). I purchased an internal hard drive from Overclockers UK. It's a Samsung 1TB drive. I also have a 64 Solid-state drive in there as my primary hard drive that Windows was installed on and a couple of programs are installed on. My storage disk (the 1TB disk) is for all my music/films etc. Whenever I drag and drop a file into the Samsung hard-drive - it copies it rather than moves it instantly.When I had a laptop, I had 3 external hard drives and this is the way it copied files onto them.how I can get the internal drive to stop acting like an external drive?
View 6 Replies
View Related
Aug 23, 2012
I have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.When I am trying to load windows into it I get the errorWindows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menuThe Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)[CODE]
View 1 Replies
View Related
Jun 15, 2011
I noticed that Windows 7 takes a bit longer to read my photo & video files specially those in my external hard drive. I have to wait for that green bar on top to completely fill-up before accessing my files. Usually takes about 2-3 minutes for each folder. My other laptop which runs on XP displays the files quickly.
View 4 Replies
View Related
Apr 30, 2012
I have a WIN -7 system with 1 trig SADA hard drive. I also have a Vista system with a 750mb hard drive from my old computer.Can I install the Vista hard drive into the Win-7 system and boot from either system?
View 1 Replies
View Related
Jul 25, 2012
I made the naive mistake of trying to upgrade from a Biostar TH67+ MB to a MSI Z77A-GD65 MB using my existing Windows install. After I installed the new MB and the new drivers within Win 7 Pro 64 bit, the machine wouldn't boot. So I reverted to the Biostar MB and it still won't boot. I have tried Safe Mode (which just hangs) and I have run Startup Repair several times. How I can further troubleshoot/repair the boot?
View 1 Replies
View Related
May 21, 2009
I'm using the release candidate and whenever I plug in my Western Digital Passport USB external hard drive, I get nothing. It doesn't show up in device manager or in My Computer. The light on the harddrive comes on and the drive spins up, so I know it's working. Windows just won't recognize it.
View 9 Replies
View Related
Mar 23, 2012
750 Samsung portable device. Problems seems to sort itself out eventually but it keeps firing up prompts to format the drive before I can use it. First time it happened I had to unplug it, restarted and then it was OK. It just did it again and then again when I restarted, took a minute or two but eventually it read the drive and it was ok. Why is this happening and what can I do to stop it? Might it be a power issue? I have the device connected via a USB 2.0 port, through an extension lead and then through a 4 way splitter. I have had problems with this splitter before I think, but not with the small connector. Maybe I can try connecting it through one of the other ports and see if it still has the same problem.
View 8 Replies
View Related
Jul 13, 2012
I have windows 7 64 bit and I'm trying to copy data from my old desktop which won't boot up anymore to my laptop. It is a 3.5 inch sata hard drive which I connected to a usb external hard drive dock. But when I plug it in windows just doesn't recognize it and it doesn't appear in windows explorer. When I go into disk management it recognizes it but says it is not initialized and asks me if I want to initialize it. I'm reluctant to do this as I'm not sure if it will wipe the drive. Any ideas on how I can view my files?
It is a 300GB drive split into 3 NTFS partitions which has both windows xp and windows 7 installed on it.
View 1 Replies
View Related
Aug 7, 2012
For some reason my HP Laptop (Win 7 Home Premium) can't see/recognize my usb external hard drive (seagate). When I start/restart my computer and connected the usb cable into laptop, it shows the icon on bottom taskbar (safely remove hardware and when clicked on the usb icon, I see "open Devices & Printers and Eject USB to IDE bridge), but I can't see my drive at all when I click on "my computer"? I can only see it under "right click Computer, Manage, Device Manger, Disk Drives," it only says; "generic USB Disk USB Device". And when I expanded the USB controllers via Device Manager, I can see it under USB Mass Storage Device. Sadly, I can't do much there/here unless Win 7 can see/recognize the drive under "My Computer".<> HD is 40GB IDE Seagate (enclosure is PowerSpec 3.5 IDE to USB 2.0)<> Drive is only storage for data, documents, pictures and softwares/programs, etc.<> Drive is/was not formattedAgain, this drive was never formatted, only for storage purpose (i.e. pictures, documents, data, etc.). I can see it on my old computer when connected internal via IDE cable.
View 7 Replies
View Related
Oct 25, 2012
I have recently had to ditch my old computer windows xp, and bought a new Dell running windows Hoem repmium 7 (64 bit). I had a 32 bit ide external hard drive and had backed up my files there. Having got the enw copmpouetr set up I am trying to access my archived files on the 32 bit to transfer to new hard disk, but am unable to do so. Windows explorer locks up.
View 3 Replies
View Related
