I plugged it into my pc, but I cannot see it either in Windows or in the BIOS. I want to run a diagnostic of it to see what is wrong with it, but since I can't access it I can't do anything with it.
View 1 RepliesI installed an old 160GB Seagate Barracuda into my Win7Pro64 machine for some extra storage room. At first it worked fine. I cleaned it out and did a quick format in Windows.
Now Windows does recognize it at all. I see it in the BIOS but it won't show up in Windows.
It's a hp pavilion elite m9652uk. Getting really frustrated. I'm installing from USB with Sata drivers on them but they don't help!
View 9 Replies View RelatedA friend of mine's computer stopped working a few days ago. When turned on they only get a message to change the boot sequence or insert boot media.
I took out their HDD and attached it as a external to my computer. I then backed up all their files (the drive appears to be working fine.) not being sure what the issue was I decided to reformat the drive and re install a clean version of win 7.
After finally getting the drive completely erased I reformatted as NTFS and installed it back into the computer. At this point The bios did not recognize any HDDs or optical drives (I had the win 7 disk in the DVD drive).
I created a bootable USB win 7 disk which the computer did recognize and initiated set up. At this point the set up process does not recognize any drives.
Not sure what to do to get it to recognize the drive. My initial thoughts are formatted incorrectly.
I have a compaq CQ60 104TU laptop, my previous harddrive crashed and i has an external 500GB hardrive lying around. So, I opened it up and took the Harddrive out and inserted into my laptop.When I am trying to load windows into it I get the errorWindows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure that the disk's controller is enabled in the computer's BIOS menuThe Hard disk has no data, and i don't have a CD-Rom, have made my USB bootable manually using DISKPART (this method of installation has worked for me before)[CODE]
View 1 Replies View RelatedI have purchased an adapter that holds a drive or SSD and fits instead of the DVD drive. When connected windows from the main drive recognise it as second drive and all is hanky-dory the issue is that i want to install windows on the SSD but the SSD is not recognized as bootable by the BIOS and after seeing it is a common issue with no solution on many web pages i have left wondering if there is a way of booting windows from thehard drive but somehow diverting it to the SSD - maybe hard linking all system files or something...
View 6 Replies View RelatedI want to install Windows 7 on a clean drive.... but I cant even get to the install options, because the drive is not recognized when i turn on the machine. It stalls, even before I can get into the BIOS settings.I need to manuallly disconnect the drive > then change back to IDE mode inside the bios and now I am able to install Windows.The funny thing... I have a backup image of a running Windows 7 installation and if I copy it onto the exactly same drive it runs without problems in AHCI mode another weird thing.... i already installed Windows 7 in IDE mode and thought that maybe later, once the installation is done i could switch back to AHCI.well, same thing.... once ahci mode was enabled in the bios, the drive was not recognized anymore.i also tried to install the chipset drivers from within windows and got a "the system does not meet the minumum requirements."
View 8 Replies View Relatedit was working before the BIOS Update My Board is Intel DG31PR Updated to the [URL] and i dont remember the old BIOS version?
View 2 Replies View RelatedFirst off I am running Win 7 on a primary SSD, and have 2 1TB HDD in RAID 1 for storage. I have been running this setup fine for a while now. I recently updated my BIOS (P8P67) using the EZ Flash utility from USB per the following steps:
-Restore defaults
-Flash new BIOS
-Restore defaults
-Reset SATA mode to RAID
Everything went fine, and I verified that my BIOS was seeing the 2 HDD as 1 volume. The Intel RAID controller shows the mirrored volume and 2 drives on bootup, all fine. However, when I get into windows, the RAID volume is not listed in the Intel RST software, device manager or disk management.
I've built an 128gb Samsung (830 Series) SSD into my Acer RL70 Nettop. It was empty and when I tried to boot the nettop there was only the message "ERROR: No boot disk has been detected or the disk has failed". Then I connected the SSD to another computer and installed windows on it and it worked on that PC. When I put it pack into the Nettop i got the same error again. In the Bios, it shows the SSD correctly.
View 2 Replies View RelatedIt was working before the BIOS Update My Board is Intel DG31PR Updated to the (http://downloadcenter.intel.com/Deta...=2839&lang=eng) and i dont remember the old BIOS version
View 2 Replies View Relatedhard drive registers in BIOS, but not in the windows 7 Ultimate 64 bit installation screen. Any questions I will answer RIGHT away. Oh dear God please help me. I took it in to a repair shop and I think I knew more than they did and left without any substantive help (but a $40 bill ). Do I need to format the HD? Would drivers help? All the websites say everything should be compatible - no problem - but nothing here.
WD Blue 640 GB (single HDD)
AMD Phenom ii
GA-MA785GM-US2H Gigabyte motherboard
OS: Windows 7 Ultimate 64 bit
Like Mac has the ability to add extra desktops can Windows 7 do it too ?Or even a way to let me increase my desktop size so I can slide around to different parts of it ? Can it be done or do I have to download a 3rd party software ?
View 2 Replies View RelatedI recently partitioned my hard drive (using Paragon Partition editor) and it failed, after finally getting my MBR working again, I only had 800GB rather than 920GB. This was the amount I had tried to allocate to a different partition, yet it does should 920GB some places. This shows the problemI really need to get the rest back ( I make movies and need space)Gparted finds it as 920.04 GB's, so it is definitely Windows that will not detect it.UPDATE
View 1 Replies View RelatedCan you limit the amount of ram windows is allowed to use?
Example I want windows to use 10gb of my ram and I am planing on using the other 22GB as a ram disk
I have a Zotac 570 gtx connected via HDMI cable to my Asus VE258 LED monitor.I've had this video card and monitor setup working before with the exact cable, card and monitor.Something changed in my system where the monitor is no longer recognized for what it is. When i go into my Nvidia control panel under change resolution 1.Digital Display, 2. DVI-PC Display - Resolution 1080p 59 Hz. There is no DVI cable plugged into the computer and the monitor is set on HDMI input. When i go to my Audio playback devices, the HDMI connection does not show up at all, even as disabled or disconnected.When i go to play a game (Diablo 3, Skyrim, Farcry2) The game either doesn't open (skyrim) giving me the error that resolution is not recognized (but then does not give me any resolutions to choose from in the options menu) or will play (Diablo 3) but is stuck on extremely low resolutions with only 2 options.
Here's what i've done. Contacted Zotac and had them send me the most recent drivers for the video card. Uninstalled originals and re-installed the new ones. Contacted Asus (they say its not the monitor as long as its set on HDMI input) I am unable to find a driver that will make my computer (Windows 7) recognize the monitor for what it is. Zotac failed after their attempt with the driver and told me to RMA the card. So i did... i waited a month.
Here is my current hard drive partition setup: [URL]. I want to move my boot partition to the beginning of the hard drive. The partition labeled "Extra HD" can be erased, but I don't want my boot partition to be messed up at all. Is this even possible? I know Windows only lets you install one boot partition per hard drive.
View 1 Replies View RelatedI was wondering, I know Win7 64bit can natively emulate 32bit programs to an extent, but can I do advanced compatibility for it be able to more emulate 32bit?
View 1 Replies View RelatedIn windows XP I remember I could specify whatever I remember of a file and I could get straight to the file I was looking for, I could only remember a range of dates, an approx size, tow or three file extension... and thats it.. the search in windows 7 is good, but only for looking files that you know are there and you just want to save time scrolling down until get it. I have been in this situation various times, but I cant stand it anymore
I am looking for an audio file (a recording of a conversation). I don't remember the name (probably the default name the recorder put on it [there fore must be hundreds of files with the same names but in different folders). The specs I remember from the file, or what I am sure it is are:
Size between 1mb and 20mb
Create and or modification date: between 2008 and 2010
File type: wav, mp3, qcp or amr (i don't remember if i convert it, if i edited it... )
In windows xp I would have found the file, but in this windows 7 something CANT be so simple and when it is forced to be, it doesn't work properly. When I try to use the "So Super duper" simple all mighty space for searches in the upper right corner... it only give me options for (despite the name itself ...) "modified date" and "size". How do I chose a range of date, a range of size various fiile type? Why its so complicated in windows 7?
I got a new desktop just under 2 months ago. It's not a big deal but it can bug me sometimes. This is what My Computer looks like:OS C: is the primary internal HD.Local Disk L: is my 320GB external HDD.DVD RW D: is my one and only CD/DVD drive.E:, F:, G: and H: drives are non existent as physical drives installed on the computer, but they appear as options within the menu. How do I get rid of these if they don't even exist?
View 9 Replies View RelatedIn the screen shot, C, E, and F are legit volumes/drives. I have no idea what this Local Disk 'Q' is. I try to open it, says not accessible (and it shouldnt be because it doesnt exist)
Also, Removable Storage, I have 1 DVD drive, the rest G - L are bogus. One of those is listed as a BD-ROM which I dont have either.
Why are these listed when they dont exist?
I am planning on upgrading from XP to Windows 7 Professional fairly soon. I know that it performs a clean install and that I need to back up my C drive.
My question is in regards to my secondary hardrive. Will the clean install also wipe the second hardrive or will it leave it untouched? Basically, can I back up my C drive onto the secondary drive without fear of losing it all? I would assume it would leave the second drive alone but I couldn't find any info and thus, why I am here asking.
Amazing how fast one uses up the USB Ports supplied in the desktop PC.
Am trying to only use the ones in the back, as it gets messy if I also use the two on the front.
Have an external powered 4-Port hub that I purchased, and am using that also.
Seems like I need another one or two spigots.
Question: If I get another powered external 4-Port extender, can this be plugged into a port on the existing extra Port extender I already have, or must it only be plugged into one of the USB ports in the back of the PC ?
Does it matter at all, and the PC will recognize it either way ?
How do I set an extra mouse button as a key from my keyboard. Example, I want mouse button 5 (a button on the side of my gaming mouse) to be the keyboard key 5
View 4 Replies View RelatedI have 4 partitions...1 with 7, and another with Vista. I want to put XP on also, but of course I can't create another primary. I'm pretty sure I can add XP on a logical, but don't know how. Am I right, or am I out of luck with XP.
View 9 Replies View RelatedI want to buy me an 1 gig ram module for my pc. I only have 512mb of ram right now so how much will it speed up my pc?
View 9 Replies View RelatedOk, I just got a new Windows 7 Computer (yea! ). When I open up My Computer, it shows 4 "Removable Drives" (Which, I assume, are from my flash card reader, though there are no cards in them). They are hidden drives, but I set it so that it will show hidden files and folders.... I don't like all the clutter of the extra unneeded drives, so is there a way to hide individual drives?
View 7 Replies View Relatedi did a clean install of win7 32 bit after having 64 bit on my pc.but i still have the extra file on my pc. Why? and can i delete them
View 1 Replies View RelatedI've got an Acer Model As5742 Laptop with an i5 480M processor and 8 GB of good Ram. I'm running Win 7 Pro 64 Bit. It's only about 5 months old and this started about a month ago. I have no other problems. IE: Blue Screens or Lockups or anything, just the Bios clock changes to a random date and time after every restart. I replaced the Bios battery twice and it only effects the chore of having to reset the time in Windows every time I boot.
I'm going to send it to Acer to be repaired within a week or two, but maybe it's not a bad timing mechanism in the motherboard and one of you people have a correct solution to it. Which will save me the trouble of sending it in for a motherboard replacement.
I do have all the drivers and bios updates installed. Oh yes I've ran about 15 different virus Etc. Malware scans with several different products and they all come back clean. I ran System File Checker SFC /scannow from the command prompt several times that also comes back OK.
I use W7 and Thunderbird email. Each time I print an email (text) even if only a few lines, I get an extra full page of return paths, authority, analysis, originating, etc. Covers everything from soup to nuts. Printing anything else is great, no problems.I have checked all settings and can find nothing that looks abnormal. If I copy and paste and then print..no problem.I have an HP Photosmart C4640, Can't find anything on HP website that relates. Does anybody have any ideas?
View 2 Replies View RelatedMy new Dell computer came with what looks like an extra taskbar at the top of the Windows 7 desktop, although it's bigger then the taskbar. Was there from the first time I turned on the computer. It's disappeared with no explanation.
I've spent over an hour looking at Windows 7 desktop screen captures and tutorials, and can't find anything that looks like it, and almost all other photos I've seen of the Windows 7 desktop don't have it at all.
I'm guessing this is something that the Dell OEM version of Windows 7 uses? Is it even part of Windows 7 or is this something from Dell? I'm not even sure what it's officially called, and don't know how to get it back.
The closest photo that explains what it looks like is attached. In that photo, it looks like someone took it and made it into a circle, but on my Dell computer it was on the top of the desktop in a straight line.