Windows Setup Cannot Configure Hardware

Aug 16, 2012

I have been doing lot of reading and looking around but cannot seem to get past this problem. I recently bought a new HP laptop, i7 processor, Navidia GT6300M video card, 8 GB RAM. HP original windows come with so much bloatware and have so many problems that i want to do a fresh clean windows 7 install on the machine. So i got a bootable windows 7 USB drive, actually i downloaded windows 7 home premium from internet and used windows 7 usb tool to make usb drive. When i go install it, first i come to partition table, HP has four partitions, one system and one recovery and two other small ones. I have tried installing after removing all partitions and make just one system drive, i have also tried keeping the paritions and install on system drive. Every time it goes through the install, reboots, does get through updates and all and on the last part gives the above statement and then i cannot get anything to work. I am able to restreo back to factory using recovery discs so windows work that way.

View 7 Replies


ADVERTISEMENT

Cannot Install Windows 7 On SSD - Setup Could Not Configure

Oct 25, 2012

When I install windows 7 on my regular hard drive it is fine. When I try to install it on my ssd drive it says that windows setup could not configure windows to run on the computers hardware, why???

View 2 Replies View Related

Lenovo G560 / Setup Cannot Configure Windows 7 On This Hardware

Nov 24, 2012

I have installed windows 7 on many of these Lenovo G560's. They are standard from the factory. I had just setup this one particular laptop myself a couple months ago. Now the customer got "the problem" and upon attempting to wipe and reinstall win7 (the exact same OS/flavor, on the exact same hardware) now I receive the "error" saying windows setup cannot configure windows on this hardware.

it's like it gets most of the way thru the basic install, and the harddrive has all the basic files on it. But setup just cannot continue. I Know all about new hard drives, the 4k-thing, that has nothing to do with this, unless some virus is causing a "hardware" problem. Or maybe it is a bios issue? Bios corruption? I can't even reinstall / update bios unless windows is on it. And now I can't finish the win7 install. I have one of these lenovo's as my own laptop here/now typing this on. I don't have a problem reinstalling win7 on it.

I have tried installing from DVD, from a usb stick, from the hard drive itself (copying files to a partition on the hard drive) no go. I've tried changing BIOS settings for the hard drive from AHCI to "Compatible" (there are only these two options) and made no difference. Why (or What) the change? What causes this on standard hardware that normally would work? Is it probably broken hardware? (a bad drive controller?)

View 1 Replies View Related

Windows 7 Setup Could Not Configure To Work On This Computer's Hardware?

Jun 3, 2011

120GB Fujitsu Hard drive is set to IDE, but I've tried AHCI as well. 2GB Crucial RAM.Motherboard is ASUS M4A785-M, processor is OEM Phenom II x4 920. Using on board graphics. The only USB device that is plugged in is my mouse. I've tried 2 different ISOs and almost all the editions and I get the same result. I've tried installing the chipset driver along with it, but when I do it just freezes after it restarts.I'm starting to think that something isn't compatible with a 64 bit OS, even though everything is listed..

View 2 Replies View Related

Windows Setup Could Not Configure Windows To Run On Computer's Hardware

Dec 8, 2012

my pro this widows setup could not configure windows to run on this computer 's hardware

View 3 Replies View Related

Windows Setup Cannot Configure Windows To Hardware?

Dec 3, 2011

I was recently using my computer, when I got the message, "potentially harmful software detected." I clicked the take action option, but nothing happened. So, I turned off my tower, and turned it back on. It wouldn't get to the user sign in process. It just kept with it's blank screen. So, I've had a similar problem before, so I reset my computer to factory condition, since I don't have anything vital on it. I ran start up repair, which worked fine. I ran tests which worked fine and said it passed the entirety of the basic test. I did a more specific hard-drive test, and it passed that. So,I reset the computer to factory condition, and it goes well to that point.But then it gets to the "Setting up services" part of the resetting your computer, and it loads to installing services, but then it will say, "Windows setup cannot configure Windows to this hardware." or something to that affect. Then I'll get a message saying "Windows could not complete installation. Restart instillation." And it'll go no further, even when I reboot. What's wrong? If it helps, I use an HP 2009m.

View 5 Replies View Related

Windows Setup Could Not Configure Windows To Run On This Computer's

Aug 10, 2011

I'm trying to do a fresh clean install of Windows 7 x64 on a new harddrive (Seagate Barracuda ST31000524AS 1TB 7200 RPM 32MB Cache SATA 6.0Gb/s 3.5") through a USB Key

CPU: Intel i5-2500k
MSI P67A-C43 (B3)

Installing proceeds as normally, until it restarts at Configuring hardware....The resolution will change and then the error message "Windows setup could not configure windows to run on this computer's hardware" will pop up.I've changed my SATA settings in the bios to ACHI, RAID, IDE and tried installing multiple times under each option but no dice.I've tried loading Intel Rapid Storage Technology Driver from the MSI website prior to the Windows installation, but its giving me an error message about the drivers not being signed.

View 9 Replies View Related

Windows 7 Setup Could Not Configure Windows To Run On This Hardware?

Nov 13, 2012

I recently preformed a clean install on my Inspiron 5423. It seemed fine until I got aan error message -"Windows setup could not configure windows to run on this computer's hardware"

View 4 Replies View Related

"Windows Setup Could Not Configure Windows On This Computers Hardware"?

Sep 23, 2012

I am currently trying to install Windows 7 64-bit on my laptop. I current have it set up at 32-bit Windows 7 because one of the RAM sticks died a year ago. I just bought 8 GB of g.Skill ram from Newegg and received it 4 days ago[URL]... I've ran memtest for several passes and no errors show up.

Laptop: HP DM4 1063cl (approximately 2 years old) It used to be able to install Windows 7 from the same disk, but when I tried 3 days ago, it failed. I've downloaded multiple isos of SP1 from Microsoft website and still gives me the same error. I read about RAID drivers but HP told me that AHCI mode is default. I've set the BIOS to default settings and still wouldn't work. The only thing I've ever done to HDD was partition it. I've restored the HDD in comand prompt and still wouldn't run. I've switched the memory back from the old ones and also single sticks and still wouldn't work.

View 16 Replies View Related

"windows Setup Could Not Configure Windows To Run On This Computer..."

Aug 4, 2010

I've recently gone out and bought 4 HDDs to run as a raid 10, now I am using my motherboards onboard fakeraid a ihc10r. The cables are fine and when I try and install windows 7 (pro 64x) onto each individual drive with raid and ahci turned off in bios windows installs just fine. Now when I raid the drives as raid 10 windows install can see the drive and even then I load the drivers just to be sure iastor.sys etc (I've tried with and without) the same thing happens every time after the first reboot I get about 10 minutes in and about 2 mins after the screen resolution is adjusted BOOM "windows setup could not configure windows to run on this computer's hardware". I've also tried installing with 1 hdd plugged in, raid turned on in bios but no array setup and it also fails at the same point. It's pretty wierd.I did a memtest and it passed this, I also have the jmicron piece of garbage on my MB turned off. Furthermore the install proceeds when the SATA controller is in AHCI mode BUT not in raid mode.

View 9 Replies View Related

Windows 7 Starter Getting Error On Initial Setup; Locked In Setup Loop?

Oct 5, 2011

one of the netbooks was plugged in to initially power it up, but then hard-shut-down before Windows could run through its initial setup.Now when I boot up the netbook, and it attempts to go through the initial windows setup "Setup is starting services", and then throws an error message: The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.I restart, and the cycle continues. This happens whether I try to boot normally or in safe modeI've got no CD-drive attached to it, so I'm not sure what I can do to break this error cycle.

View 6 Replies View Related

How To Configure Windows 7 For SSD

Feb 25, 2011

how do I configure win 7 for the RevoDrive x2?

View 1 Replies View Related

Configure NT In Windows 7?

May 8, 2012

i havw 2 computer buth running under window 7 i have suscesfuly changed confil,nt so that it accept files = 200 but excatly the same command is not acceptet on the second computer when starting and msdos program that requires 39 files to be oppend at the same time the answer is tha only 32 files can be opende at the same time ?

View 2 Replies View Related

Configure Windows Explorer To Look Like XP?

Nov 20, 2011

Does Windows 7 offer a way to configure Windows Explorer to look like and function like it did in Windows XP? If so, how?

View 1 Replies View Related

Keep Getting A Windows 7 Configure When Boot?

Nov 28, 2011

every time i boot up before it lets me sign on, a windows configuring comes on every single time for about to weeks now, and its taking about five minutes to boot up after. i do music and my editing programs and video programs and wmplayer now freeze and skip about every 7 to 10 seconds, making my work impossible.ive tired system restore but it wont let me create a earlier date, or go past the date of the nov 18 2011.before it was showing a black screen when i would boot up and would say" corrupt file sytem ntfs, said their was a corrupt file do to a recent update fail or installed, so i have went to windows and installed every update i could, now the black screen doesnt come on , but the freeze in my programs and media continues as well the boot up. but here whats wierd cuz if i watch videos online or listen to music online there is no freeze? just on when offline?

View 9 Replies View Related

Failure To Configure Windows

May 17, 2012

I have the problem of failure to configure windows, i have seen a few posts on here about people solving this problem but i am a bit of a noob so was hoping i could get some 1 on 1 help.I was stuck in a loop for a while in that i would get to the failure to configure windows screen and it would either restart or would just stay on that screen for hours. i have now somehow got onto my laptop (don't ask me how! just luck i guess) but i was wondering if there was something i could do to stop it happening again. until that time i will be trying to leave my laptop turned on.

View 5 Replies View Related

Can't Configure Windows Firewall?

Dec 4, 2011

My computer got infected by Win 7 Security 2012 rogue virus. I removed the virus with the instruction on bleepingcomputer. I think I removed the virus, but I cannot go onto the firewall. When I go to windows firewall, everything is disabled and thus not able to enable the firewall. So when I click 'Use recommended settings' it says that Windows firewall can't change some of your settings, Errorcode 0x80070424.

View 6 Replies View Related

How To Configure Portproxy On Windows 7

Mar 12, 2011

I am trying to get my Windows 7 machine to forward tcp connections to different address and port. I searched through the internet and found that it can be done using "net sh interface portproxy" command. Specifically I am running the following from the command line:

netsh interface portproxy add v4tov4 8000 192.168.0.100 9000.(192.168.0.100 is the address of an other computer on my network which listens on tcp port 9000)

[Code]...

View 3 Replies View Related

Configure Telnet In Windows 7?

Oct 18, 2011

how configure telnet in windows 7

View 1 Replies View Related

How To Configure Ip Address On Windows 7

Oct 29, 2011

I HAD A COMPUTER WITH WINDOWS XP CONNECTED TO THE INTERNET, THEN I REPLACED IT WITH A WINDOWS 7 COMPUTER.SINCE THEN, MY CONNECTION KEEPS DROPPING OFF AND THE ERROR READS..."LOCAL AREA CONNECTION IP ADDRESS IS NOT CONFIGURED"

View 3 Replies View Related

How To Configure 5.1 Channel In Windows 7

Feb 3, 2013

I am not able to find any other speaker configuration other that stereo in my laptop. how to configure it.

View 1 Replies View Related

Windows 7 Keeps Trying Configure Updates & Failing?

Aug 26, 2011

Since the beginning of August my Win 7 system installs updates at shutdown and then at the beginning of the next bootup, it tries to configure the updates and fails. I'm pretty sure it's the same updates. How can I find out what updates these are and stop this from happening? My Win 7 is 32 bit. jbschwartz--2008 has chosen the best answer to his/her question.Click here to view the answer that was selected.

View 19 Replies View Related

Epson Printer Won't Configure With Windows 7

Jan 24, 2012

i got a packard bell pc today and for some reason when i plug my printer into it it says device unrecognizable, no matter what port i use. other usb devices such as the mouse and hard drive will work fine, with no problems, just the printer, epson dx4450

View 4 Replies View Related

Way To Configure Windows Backup To C Drive Only?

May 26, 2011

I have my C drive, another internal drive and 2 exterior drives. I have used Cobian backup for several years to backup documents daily. Just started using Win 7 recently and decided to use its backup for system files in case my C drive fails. My second external is new and it is 500gig. After the backup it only has 154gig remaining. Is there any way to stop it from backing up the other 2 drives? This is probably very simple, but i did google it and didn't find anything.

View 6 Replies View Related

Windows 7 Live Mail - Way To Configure?

Aug 17, 2011

I've recently purchased a laptop with Windows 7 which obviously has Windows Live Mail (WLM).I had my mail files etc transferred across from Outlook Express on my old PC and messages to/from BT Yahoo (I have just the one btinternet.com email address) were pointed at WLM with POP3 and all that nonsense(!)It has been configured such that inward and outward emails ALSO remain in my BT Yahoo mail boxes - I find it useful to see these when I access BT Yahoo (webmail)from my work PC or any other PC when I'm travelling without my laptop.This worked fine for a while but I've recently had trouble with duplicate emails being received on WLM. I suspect this might be because my BT Yahoo account is a bit "clagged up" with emails which slows it down and we have a very poor internet connection being rural. I think this prompts BT Yahoo to resend messages and hence I end up with duplicates on WLM.

I believe that (unlike Outlook Express) WLM is "web based" and therefore I SHOULD be able to view just the one "version" of my mail from any PC without the need to log into BT Yahoo at all - if I could do this I guess I could avoid having to retain any messages at all in BT Yahoo and maybe this would solve the problem

View 3 Replies View Related

How To Configure Windows 7 Not To Install A Program

Dec 13, 2011

I'm looking for ways to configure windows so that a particular program is never installed in the PC. Please help in understanding if there is a way to do so.

View 2 Replies View Related

Windows Cannot Configure One Or More System Components

Oct 19, 2011

I have met some problem when formatting my laptop when the formatting process reaches the complete installation of windows 7 part,it suddenly says that the windows cannot configure one or more system components n ask me to restart the installation for windows 7.I kept trying for many times but the result is still the same.So,i would like to ask is there any ways to solve this problem??

View 2 Replies View Related

Windows Could Not Configure One Or More System Components

Dec 27, 2011

I am performing a clean install of windows 7 on my sony VGN-FW520F (which had Windows 7 previously). I performed a secure erase of the HD with "Clean All" command in DISKPART and reformatted the drive in ntfs. When I install Windows 7 64 bit I get an error 85% through that says "windows could not configure one or more system components" and requires a new installation. Did I wipe critical drivers from SONY that are needed to perform an install? If so what steps do I need to take to install Windows 7?

View 4 Replies View Related

How To Configure A SATA To Windows 7 For Data

Feb 25, 2011

configure a 320 gig Western digital SATA on a Win 7 Ultimate 32 bit as an Data Drive.I took out the 40 gig IDE that was on the Data end,and replaced it so my wife would have more,Gig space to download more movies and,handle extra information. I went to the BIOS and checked to see if it was activated,I went to the Device Manager to see if the PC was reading it and, it is it says that it'a working properly but the,My Computer wont read it,I'd like to find out how to configure,this device so that you can use it,I have a IDE on my main drive and, wanted to use a SATA on the data drive,since it's more reliable.And on the XP theres a area to go to reformat the disk, on Win 7 I know theres an area you can go to to reformat your hard drive so the computer will read it,when you go to my computer ,will I have to reformat the Sata to NTFS like the rest of the drive's on the PC?

View 3 Replies View Related

Way That Can Have Windows Auto Configure IP Setting

Oct 22, 2012

Is there a way that I can have Windows auto configure my IP settings, so that when I'm connected to my home network, it uses the static iP settings I have, but when I'm at school or anywhere else, switch back to dynamic? Normally I have to go into the settings and turn it on and off every time.

View 1 Replies View Related

Windows 7 Attempting To Configure Updates?

Sep 2, 2012

I am trying Windows 7 professional 64bit is trying to update my PC now for the umpteenth time. I ask it to download and update. It tells me that it has updated and needs to restart. When it restarts, it has a couple of attempts at configuring the updates and lets me use Windows. When I turn my PC off, I get a 'Do not turn off, etc'. When I start my PC and check to see if the install worked, I am told it hasn't.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved